- 25 8月, 2008 1 次提交
-
-
由 Takashi Iwai 提交于
Added the basic support of AD1882A codec chip. It's almost compatible with AD1882, but with a digital mic and some differences in connections. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
- 13 8月, 2008 1 次提交
-
-
由 Takashi Iwai 提交于
The widget node 0x21 should be initialized as unmuted/full (0dB) as default. This will reduce additional manual work by user at the first time use. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
- 10 7月, 2008 1 次提交
-
-
由 Takashi Iwai 提交于
Added the missing SSID of Thinkpad Z60m for model=thinkpad with AD1981HD. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
- 18 6月, 2008 1 次提交
-
-
由 Takashi Iwai 提交于
Don't create mixer volume elements for Headphone and Speaker if they use the same DAC as normal line-outs on AD1988. Otherwise the amp value gets screwed up, e.g. https://bugzilla.novell.com/show_bug.cgi?id=398255Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
- 13 6月, 2008 1 次提交
-
-
由 Takashi Iwai 提交于
Removed unused mutex from patch_*.c. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
- 30 5月, 2008 1 次提交
-
-
由 Takashi Iwai 提交于
The mic pins are wrongly assigned on AD1884A mobile model. The mic handling is fixed for the automatic mic selection, too. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 25 5月, 2008 1 次提交
-
-
由 Travis Place 提交于
Added a config table entry for the ASUS P5K-E/WIFI-AP mainboard (ID 1043:8227) to use AD1988_6STACK_DIG Signed-off-by: NTravis Place <wishie@wishie.net> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 24 4月, 2008 13 次提交
-
-
由 Takashi Iwai 提交于
TP X300 digital mic requires additional init verbs with magic COEFs. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Added the support of AD1989A and AD1989B codecs. These codecs can have multiple SPDIF devices, but currently we handle only one SPDIF. If any real devices with two SPDIF interfaces (likely one for SPDIF and one for HDMI), we'll fix this rightly. Otherwise, these codecs are pretty similar with AD1988. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Added the model thinkpad for Lenovo Thinkpad X300 with AD1984A codec. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Keep the format verb at closing PCM streams. Introduced snd_hda_codec_cleanup_stream() for the parcicular purpose. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Harvey Harrison 提交于
Move the array declaration to hda_codec.c where it is used and add includes where the individual presets are declared. Fixes the following sparse warnings: sound/pci/hda/patch_realtek.c:13744:25: warning: symbol 'snd_hda_preset_realtek' was not declared. Should it be static? sound/pci/hda/patch_cmedia.c:729:25: warning: symbol 'snd_hda_preset_cmedia' was not declared. Should it be static? sound/pci/hda/patch_analog.c:3656:25: warning: symbol 'snd_hda_preset_analog' was not declared. Should it be static? sound/pci/hda/patch_sigmatel.c:3995:25: warning: symbol 'snd_hda_preset_sigmatel' was not declared. Should it be static? sound/pci/hda/patch_si3054.c:286:25: warning: symbol 'snd_hda_preset_si3054' was not declared. Should it be static? sound/pci/hda/patch_atihdmi.c:156:25: warning: symbol 'snd_hda_preset_atihdmi' was not declared. Should it be static? sound/pci/hda/patch_conexant.c:1721:25: warning: symbol 'snd_hda_preset_conexant' was not declared. Should it be static? sound/pci/hda/patch_via.c:1962:25: warning: symbol 'snd_hda_preset_via' was not declared. Should it be static? Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Added the docking-stationc mic input to the capture source list for Thinkpad X61. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Use a private array for TLV entries of virtual master controls instead of (supposed) static array. This cleans up the existing codes. Also, now vmaster assumes the simple dB-range TLV that is the only type it can handle. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Added the new model mobile for AD1884A and compatible codecs. It's a reduced version of model=laptop. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Added the support of new AD codecs: AD1883, AD1884A, AD1984A and AD1984B. These are almost compatible except for additional digital pins, etc. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Added a new mixer switch to enable/disable the sharing of the default PCM stream with analog and SPDIF outputs. When "IEC958 Default PCM" switch is on, the PCM stream is routed both to analog and SPDIF outputs. This is the behavior in the earlier version. Turning this switch off has a merit for some codecs, though. Some codec chips don't support 24bit formats for SPDIF but only for analog outputs. In this case, you can use 24bit format by disabling this switch. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Implemented the auto-mic jack sensing for Samsung laptops with AD1986A codec chip (model=laptop-eapd). The hardware uses pin 0x1d and 0x1f for the internal and external mics, respectively. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Reprogram the speaker-pin setting at each HP pin plug to make sure the spekaer auto-muting on AD1981HD hp model. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
In the current scheme, PCM device numbers are assigned incrementally in the order of codecs. This causes problems when the codec number is irregular, e.g. codec #0 for HDMI and codec #1 for analog. Then the HDMI becomes the first PCM, which is picked up as the default output device. Unfortuantely this doesn't work well with normal setups. This patch introduced the fixed device numbers for the PCM types, namely, analog, SPDIF, HDMI and modem. The PCM devices are assigned according to the corresponding PCM type. After this patch, HDMI will be always assigned to PCM #3, SPDIF to PCM #1, and the first analog to PCM #0, etc. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 29 2月, 2008 1 次提交
-
-
由 Takashi Iwai 提交于
The some indices of capture elements of AD1988 are wrongly assigned. This patch fixes it. See ALSA bug#3795 https://bugtrack.alsa-project.org/alsa-bug/view.php?id=3795Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 01 2月, 2008 14 次提交
-
-
由 Douglas Kosovic 提交于
Added the support for Dell T3400 with AD1984 codec chip. ALSA bug#3699: https://bugtrack.alsa-project.org/alsa-bug/view.php?id=3699Signed-off-by: NDouglas Kosovic <douglask@itee.uq.edu.au> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Takashi Iwai 提交于
The SPDIF output on AD1986A laptop-eapd model is disabled although some Samsung laptops have SPDIF output. Enable it after checking the pin default config. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Takashi Iwai 提交于
The AD codecs have hardware SPDIF volume/switch controls but they are not assigned to the slave list for virtual master controls. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Takashi Iwai 提交于
The Speaker switch is missing in the slave list. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Takashi Iwai 提交于
Removed 'FIXME' comments that have been already fixed. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Takashi Iwai 提交于
Add master controls using vmaster to codecs that have no real hardware master volume registers. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Takashi Iwai 提交于
This header file exists only for some hacks to adapt alsa-driver tree. It's useless for building in the kernel. Let's move a few lines in it to sound/core.h and remove it. With this patch, sound/driver.h isn't removed but has just a single compile warning to include it. This should be really killed in future. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Jerone Young 提交于
This patch adds IEC958 digital out support for the AD1984 sound card. This card can be found in Lenovo Thinkapds T61/X61. The digital out is not located on the Thinkpad, but optional docking station (it's coxial digital out). I've add this support as it is done the exact same way for the AD1983 & AD1884. I have tested this patch with my Lenovo Thinkpad T61 hooked up to a docking station (that has the digital coxial) and then run to my home theater reciever. Works like a charm :-) Signed-off-by: NJerone Young <jerone@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Takashi Iwai 提交于
Sort the ad1986a config table by PCI SSID (the last toshiba entry was added wrongly). Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Jiang Zhe 提交于
The model laptop-eapd get rid of the high-pitched noise. (ALSA bug#3662) Signed-off-by: NJiang Zhe <zhe.jiang@intel.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Takashi Iwai 提交于
Sort pci quirk list in the order of PCI SSID. This makes easier to find out the buggy duplicated entries. Thanks to Andy Shevchenko for providing the sort script. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Johannes Stezenbach 提交于
Enable Analog CD Input from internal ATAPI connector on Asus M2N-SLI. Signed-off-by: NJohannes Stezenbach <js@sig21.net> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Takashi Iwai 提交于
Check the value ranges in ctl put callbacks properly so that invalid values won't be stored or written to registers. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Tobin Davis 提交于
Simple patch to add the Asus VX1 laptop to the Analog Devices pci quirk list. Signed-off-by: NTobin Davis <tdavis@dsl-only.net> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
- 20 11月, 2007 1 次提交
-
-
由 Takashi Iwai 提交于
AD1986A has a hardware problem that it cannot share a stream with multiple pins properly. The problem occurs e.g. when a volume is changed during playback. So far, hda-intel driver unconditionally assigns the stream to multiple output pins in copy-front mode, and this should be avoided for AD1986A codec. The original fix patch was by zhejiang <zhe.jiang@intel.com>. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
- 23 10月, 2007 2 次提交
-
-
由 Takashi Iwai 提交于
dac_nids arrays in each codec support code may have up to 5 items when assigned from the auto-configurator. Some codec codes have less numbers than the possible max. This patch defines the constant and fixes the array definitions. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Takashi Iwai 提交于
The jack detection bit on AD1986A Lenovo N100 seems inverse from the standard definition. Now fixed the detection properly. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
- 16 10月, 2007 2 次提交
-
-
由 Takashi Iwai 提交于
Added a new model laptop-automute for AD1986A, which has the HP jack detection and auto-muting of the speaker. Currently, it's used for Lenovo N100. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-
由 Takashi Iwai 提交于
Use the bind-control for NID 0x1a and 0x1b as Master volume control on AD1986 model=laptop as well as model=laptop-eapd. This will fix the missing output on some devices. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@suse.cz>
-