Another one in the "ok, this is trivial to fix" list... :-)

[PATCH] fix directory references in usb/README
Signed-off-by: NDirk Hohndel <hohndel@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This is a resubmission of the patch to upgrade the unusual_devs.h file to
support an older firmware revision of the Nikon D200. This patch includes the
requested /proc/bus/usb/devices information.

T:  Bus=01 Lev=01 Prnt=01 Port=09 Cnt=02 Dev#=  6 Spd=480 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=04b0 ProdID=040f Rev= 1.00
S:  Manufacturer=NIKON
S:  Product=NIKON DSC D200
S:  SerialNumber=0000000
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=  2mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Signed-off-by: NMike Pagano <mpagano@gentoo.org>
Signed-off-by: NPhil Dibowitz <phil@ipom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Two main issues fixed here are:
 - An improper use of in-struct lock to protect an open count
 - Use of urb status for -EINPROGRESS

Also, along the way:
 - Change usb_unlink_urb to usb_kill_urb. Apparently there's no need
   to use usb_unlink_urb whatsoever in this driver, and the old use of
   usb_kill_urb was outright racy (it unlinked and immediately freed).
 - Fix indentation in adu_write. Looks like it was damaged by a script.
 - Vitaly wants -EBUSY on multiply opens.
 - bInterval was taken from a wrong endpoint.
Signed-off-by: NPete Zaitcev <zaitcev@redhat.com>
Signed-off-by: NVitaliy Ivanov <vitalivanov@gmail.com>
Tested-by: NVitaliy Ivanov <vitalivanov@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as1014) was partly written by Tilman Schmidt.  It
clarifies the USB power-management documentation by explaining that
when a disconnect occurs, a suspend method call might not be followed
by either a resume or a reset_resume call.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NTilman Schmidt <tilman@imap.cc>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This trivial documentation patch corrects a comment in usbdevice_fs.h; it
previously suggested that the signal would only be sent on error, but I am
told that it is sent on both successful and unsuccessful completion, and
that zero indicates that no signal should be sent.
Signed-off-by: NPhil Endecott <spam_from_usb_devel@chezphil.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

In commit acd2a847 usb_serial_generic_write()
disables interrupts when taking &port->lock which is also taken in
usb_serial_generic_read_bulk_callback() resulting in an inconsistent lock state
due to the latter not disabling interrupts on the local cpu. Fix that by
disabling interrupts in the latter call site also.
Signed-off-by: NBorislav Petkov <bbpetkov@yahoo.de>
Acked-by: NJiri Kosina <jkosina@suse.cz>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

usbled has a race where show methods for attributes in sysfs can
follow a NULL pointer during disconnect. The correct ordering fixes
it.
Signed-off-by: NOliver Neukum <oneukum@suse.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Free buffer when writing ZLP_REG5 failed
Signed-off-by: NRoel Kluin <12o3l@tiscali.nl>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Fixes priority mistakes similar to '!x & y'
Signed-off-by: NRoel Kluin <12o3l@tiscali.nl>
Acked-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as1000) sets the SCSI allow_restart flag for USB disk
devices.  In theory this should never hurt, and there definitely are
devices out there (such as the Seagate 250-GB external drive) which
need the flag to be set.
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

pl2303: add support for Corega CG-USBRS232R

This patch adds support for Corega CG-USBRS232R Serial Adapters.
Signed-off-by: NMagnus Damm <damm@igel.co.jp>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This fixes some build errors ... unclear how this got past earlier tests.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch fixes a bug introduced by
commit b22817b3.
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Michael Buesch <mb@bu3sch.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2:
  ocfs2: reverse inline-data truncate args
  ocfs2: Fix comparison in ocfs2_size_fits_inline_data()
  ocfs2: Remove bug statement in ocfs2_dentry_iput()
  [PATCH] ocfs2: Remove expensive bitmap scanning
  ocfs2: log valid inode # on bad inode
  ocfs2: Filter -ENOSPC in mlog_errno()
  [PATCH] fs/ocfs2: Add missing "space"
  ocfs2: Reset journal parameters after s_mount_opt update

* 'for-linus' of git://www.linux-m32r.org/git/takata/linux-2.6_dev:
  m32r: Update sys_rt_sigsuspend
  m32r: Ignore warnings for unused syscalls
  m32r: Add missing syscalls

ocfs2_truncate() and ocfs2_remove_inode_range() had reversed their "set
i_size" arguments to ocfs2_truncate_inline(). Fix things so that truncate
sets i_size, and punching a hole ignores it.

This exposed a problem where punching a hole in an inline-data file wasn't
updating the page cache, so fix that too.
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

This was causing us to prematurely push out inline data by one byte.
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

The existing bug statement didn't take into account unhashed dentries which
might not have a cluster lock on them. This could happen if a node exporting
the file system via NFS is rebooted, re-exported to nfs clients and then
unmounted. It's fine in this case to not have a dentry cluster lock.

Just remove the bug statement and replace it with an error print, which
does the proper checks. Though we want to know if something has happened
which might have prevented a cluster lock from being created, it's
definitely not necessary to panic the machine for this.
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

Enable expensive bitmap scanning only if DEBUG option is enabled.
The bitmap scanning quite loads the CPU and on my machine the write
throughput of dd if=/dev/zero of=/ocfs2/file bs=1M count=500 conv=sync
improves from 37 MB/s to 45.4 MB/s in local mode...
Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

If the inode block isn't valid then we don't want to print the value from
that, instead print the block number which was passed in (which should
always be correct). Also, turn this into a debug print for now - folks who
hit an actual problem always have other logs indicating what the source is.
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

It's almost never worth printing in that situation and we keep forgetting to
manually filter it out.
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

Right now we're just setting them from the existing parameters, not the
new ones that a remount specified.
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6:
  ide-scsi: use print_hex_dump from <linux/kernel.h>
  ide: More TSST drives with broken cable detection
  ali14xx: constify __initdata
  ide: remove bogus ide_fix_driveid() comment
  trm290: remove bogus init_hwif_trm290() comment
  piix: add HP compaq laptop to short cable list
  alim15x3: add Mitac 8317 and derivatives to ali_cable_override()
  ide: add TORiSAN model: CD-ROM CDR_U200 fw: 1.09 to DMA blacklist
  amd74xx: arm hack
  drivers/ide: Add missing "space"
  ide-cris: don't override ide_register_hw() result
  ide: move CONFIG_IDE_ETRAX to drivers/ide/Kconfig
  ide: add CONFIG_IDE_H8300 config option
  ide/Kconfig: fix mpc8xx host driver dependencies
  macide/q40ide: add missing __init tag to {macide,q40ide}_init()
  aec62xx: Fix kernel oops in driver's probe function
  ide: skip ide_wait_not_busy() on noprobe-disks
  siimage: remove resetproc() method
  ide: don't set PIO mode on pre-EIDE drives
  sis5513.c: Add Packard Bell EasyNote K5305 to laptops

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm:
  KVM: SVM: Fix FPU leak while emulating clts
  KVM: SVM: Unload guest fpu on vcpu_put()
  KVM: x86 emulator: Use emulator_write_emulated and not emulator_write_std
  KVM: x86 emulator: fix the saving of of the eip value
  KVM: x86 emulator: fix JMP_REL

* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  scatterlist: add more safeguards
  Revert "ll_rw_blk: temporarily enable max_segments tweaking"
  mmc: Add missing sg_init_table() call
  block: Fix memory leak in alloc_disk_node()
  alpha: fix sg_page breakage
  blktrace: Make sure BLKTRACETEARDOWN does the full cleanup.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  IB/iser: Add missing counter increment in iser_data_buf_aligned_len()
  IB/ehca: Fix static rate regression
  mlx4_core: Fix state check in mlx4_qp_modify()
  IB/ipath: Normalize error return codes for posting work requests
  IB/ipath: Fix offset returned to ibv_modify_srq()
  IB/ipath: Fix error path in QP creation
  IB/ipath: Fix offset returned to ibv_resize_cq()

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: adds the context menu key (HUT GenDesc 0x84)
  Input: add definitions for frame forward and frame back keys
  Input: bf54x-keys - keypad does not exist on BF544 parts
  Input: gpio-keys - request and configure GPIOs
  Input: i8042 - add i8042.noloop quirk for MS Virtual Machine
  Sonypi: use synchronize_irq instead of sycnronize_sched
  sonypi: fit input devices into sysfs tree
  sony-laptop: fit input devices into sysfs tree

these utilities implemented in lib/hexdump.c are more handy, please use this.

Bart:
- s/KERN_DEBUG/KERN_CONT/ as pointed out by Randy
- s/DUMP_PREFIX_OFFSET/DUMP_PREFIX_NONE/
- don't include ASCII dump
- respect 80-columns limit
Signed-off-by: NDenis Cheng <crquan@gmail.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Add more TSST (Toshiba/Samsung) drives to the
'broken cable detection' blacklist.

Signed-off-by: Peter Missel (peter.missel@onlinehome.de)
Cc: Alan Cox <alan@redhat.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Port of Jeff's libata commit 54174db3
("[libata] ata_piix: add HP compaq laptop to short cable list").

Cc: Jeff Garzik <jeff@garzik.org>
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Port of Alan's patch for pata_ali.c.

Cc: Alan Cox <alan@redhat.com>
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Based on the report from snowbat@gmail.com.

Fixes kernel bugzilla bug #9195.

Tested-by: snowbat@gmail.com
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

drivers/ide/pci/amd74xx.c: In function `init_hwif_amd74xx':
drivers/ide/pci/amd74xx.c:387: error: implicit declaration of function `pci_get_legacy_ide_irq'

Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Don't override ide_register_hw() result and check if there is a hwif
  available to use.

* MAX_HWIFS is user configurable nowadays so replace it by hard-coded value.

* Remove the comment about ide_hwifs[].
Acked-by: NMikael Starvik <starvik@axis.com>
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Move ETRAX_IDE and friends from arch/cris/arch-{v10,v32}/drivers/Kconfig
  to drivers/ide/Kconfig.

* Don't force selecting ide-disk and ide-cd device drivers
  (please handle this through defconfig if necessary).

* Make ETRAX_IDE depend on BROKEN for the time being
  (it doesn't even compile currently).

Cc: Mikael Starvik <starvik@axis.com>
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>