acpi_penalize_isa_irq() should validate irq before using it to
index the acpi_irq_penalty[] table.

Here's the path I'm concerned about:

    pnpacpi_parse_allocated_irqresource()
    {
	...
	irq = acpi_register_gsi(gsi, triggering, polarity);
	if (irq >= 0)
		pcibios_penalize_isa_irq(irq, 1);

There's no guarantee that acpi_register_gsi() will return an IRQ
within the bounds of acpi_irq_penalty[].

I have not seen a failure I can attribute to this.  However,
ACPI_MAX_IRQS is only 256, and I'm pretty sure ia64 can have
IRQs larger than that.

I think this should go in 2.6.27.
Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: NAndi Kleen <ak@linux.intel.com>

Silently ignore _PRS End Tags.  We already ignore Start Dependent Functions in
_PRS, and we already ignore End Tags in _CRS, so we might as well ignore End
Tags in _PRS as well.

Silently ignore _PRS IRQ descriptors that mention no interrupts.  The spec
allows this (section 6.4.2.1 in ACPI 3.0b spec), and it probably means the
interrupt link can't be configured at all.

This patch doesn't change any functional behavior; it just removes confusing
complaints like these:

    ACPI: Blank IRQ resource
    ACPI: Resource is not an IRQ entry

when parsing _PRS data "23 00 00 18 79 00" from an IBM xSeries 335 dual
Pentium IV Xeon 2.40 GHz machine.  For more details, see
    http://bugzilla.kernel.org/show_bug.cgi?id=11049

The "23 00 00 18" part is a three-byte-long small IRQ resource with no bits set
in the IRQ mask ("00 00"), and level-triggered, active low, shareable ("18").

The "79 00" is an End Tag (type 0x7).  It is superfluous since there is no
Start Dependent Function tag and there are no resources after it, but it is
harmless.

Thanks to Gabriele Trombetti <g.trombetti.lkrnl1213@logicschema.com>
(aka Kurk) for reporting this and testing the patch.
Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: NAndi Kleen <ak@linux.intel.com>

    This patch contains the following possible cleanups:
    - make the following needlessly global code static:
      - drivers/acpi/bay.c:dev_attr_eject
      - drivers/acpi/bay.c:dev_attr_present
      - drivers/acpi/dock.c:dev_attr_docked
      - drivers/acpi/dock.c:dev_attr_flags
      - drivers/acpi/dock.c:dev_attr_uid
      - drivers/acpi/dock.c:dev_attr_undock
      - drivers/acpi/pci_bind.c:acpi_pci_unbind()
      - drivers/acpi/pci_link.c:acpi_link_lock
      - drivers/acpi/sbs.c:acpi_sbs_callback()
      - drivers/acpi/sbshc.c:acpi_smbus_transaction()
      - drivers/acpi/sleep/main.c:acpi_sleep_prepare()
    - #if 0 the following unused global functions:
      - drivers/acpi/numa.c:acpi_unmap_pxm_to_node()
    - remove the following unused EXPORT_SYMBOL's:
      - acpi_register_gsi
      - acpi_unregister_gsi
      - acpi_strict
      - acpi_bus_receive_event
      - register_acpi_bus_type
      - unregister_acpi_bus_type
      - acpi_os_printf
      - acpi_os_sleep
      - acpi_os_stall
      - acpi_os_read_pci_configuration
      - acpi_os_create_semaphore
      - acpi_os_delete_semaphore
      - acpi_os_wait_semaphore
      - acpi_os_signal_semaphore
      - acpi_os_signal
      - acpi_pci_irq_enable
      - acpi_get_pxm
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Acked-by: NAlexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: NLen Brown <len.brown@intel.com>

All kobjects require a dynamically allocated name now. We no longer
need to keep track if the name is statically assigned, we can just
unconditionally free() all kobject names on cleanup.
Signed-off-by: NKay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

modpost is going to use these to create e.g. acpi:ACPI0001
in modules.alias.
Signed-off-by: NThomas Renninger <trenn@suse.de>
Signed-off-by: NLen Brown <len.brown@intel.com>

Signed-off-by: NDan Aloni <da-x@monatomic.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLen Brown <len.brown@intel.com>

Cosmetic only.

Except in a single case, #define ACPI_*_DRIVER_NAME
were invoked 0 or 1 times.
Signed-off-by: NLen Brown <len.brown@intel.com>

It was erroneously used as a description rather than a name.

ie. turn this:

lenb@se7525gp2:/sys> ls bus/acpi/drivers
ACPI AC Adapter Driver  ACPI Embedded Controller Driver  ACPI Power Resource Driver
ACPI Battery Driver     ACPI Fan Driver                  ACPI Processor Driver
ACPI Button Driver      ACPI PCI Interrupt Link Driver   ACPI Thermal Zone Driver
ACPI container driver   ACPI PCI Root Bridge Driver      hpet

into this:

lenb@se7525gp2:~> ls /sys/bus/acpi/drivers
ac  battery  button  container  ec  fan  hpet  pci_link  pci_root  power  processor  thermal
Signed-off-by: NLen Brown <len.brown@intel.com>

cosmetic only

Make "module name" actually match the file name.
Invoke with ';' as leaving it off confuses Lindent and gcc doesn't care.
Fix indentation where Lindent did get confused.
Signed-off-by: NLen Brown <len.brown@intel.com>

Signed-off-by: NLen Brown <len.brown@intel.com>

Remove flags parameter for acpi_{get,set}_register().
It is no longer necessary now that these functions use a
spinlock for mutual exclusion.
Signed-off-by: NAlexey Starikovskiy <alexey.y.starikovskiy@intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLen Brown <len.brown@intel.com>

acpi_pci_link_set() allocates both with interrupts on
and with interrupts off (resume-time), so check interrupts
and decide on GFP_ATOMIC or GFP_KERNEL at run-time.
Signed-off-by: NJiri Kosina <jikos@jikos.cz>
Signed-off-by: NLen Brown <len.brown@intel.com>

Signed-off-by: NJan Engelhardt <jengelh@gmx.de>
Signed-off-by: NLen Brown <len.brown@intel.com>

Replace acpi_in_resume with a more general hack
to check irqs_disabled() on any kmalloc() from ACPI.
While setting (system_state != SYSTEM_RUNNING) on resume
seemed more general, Andrew Morton preferred this approach.

http://bugzilla.kernel.org/show_bug.cgi?id=3469

Make acpi_os_allocate() into an inline function to
allow /proc/slab_allocators to work.

Delete some memset() that could fault on allocation failure.
Signed-off-by: NLen Brown <len.brown@intel.com>

Signed-off-by: NPatrick Mochel <mochel@linux.intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

Signed-off-by: NPatrick Mochel <mochel@linux.intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

Signed-off-by: NLen Brown <len.brown@intel.com>

Signed-off-by: NLen Brown <len.brown@intel.com>

Signed-off-by: NLen Brown <len.brown@intel.com>

Signed-off-by: NThomas Renninger <trenn@suse.de>
Signed-off-by: NLen Brown <len.brown@intel.com>

According to the ACPI spec, it should be enabled on return from suspend,
but bugs happen.  Apparently especially on the Apple Intel Macs.
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Semaphore to mutex conversion.

The conversion was generated via scripts, and the result was validated
automatically via a script as well.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLen Brown <len.brown@intel.com>

In the case where a (broken) BIOS gives  us a blank _CRS for
a PCI Interrupt Link Device, the acpi_walk_resources()
will not terminate, but will then give the callback
the resource end tag.  Ignore the end tag.
Signed-off-by: NLen Brown <len.brown@intel.com>

This has been broken for months.  On resume, we call acpi_pci_link_set()
with interrupts off, so we get a warning when we try to do a kmalloc of non
atomic memory.  The actual allocation is just 2 long's (plus extra byte for
some reason I can't fathom), so a simple conversion to GFP_ATOMIC is
probably the safest way to fix this.

The error looks like this..

Debug: sleeping function called from invalid context at mm/slab.c:2486
in_atomic():0, irqs_disabled():1
 [<c0143f6c>] kmem_cache_alloc+0x40/0x56
 [<c0206a2e>] acpi_pci_link_set+0x3f/0x17f
 [<c0206f96>] irqrouter_resume+0x1e/0x3c
 [<c0239bca>] __sysdev_resume+0x11/0x6b
 [<c0239e88>] sysdev_resume+0x34/0x52
 [<c023de21>] device_power_up+0x5/0xa
Signed-off-by: NDave Jones <davej@redhat.com>
Cc: "Brown, Len" <len.brown@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Completed a major overhaul of the Resource Manager code -
specifically, optimizations in the area of the AML/internal
resource conversion code. The code has been optimized to
simplify and eliminate duplicated code, CPU stack use has
been decreased by optimizing function parameters and local
variables, and naming conventions across the manager have
been standardized for clarity and ease of maintenance (this
includes function, parameter, variable, and struct/typedef
names.)

All Resource Manager dispatch and information tables have
been moved to a single location for clarity and ease of
maintenance. One new file was created, named "rsinfo.c".

The ACPI return macros (return_ACPI_STATUS, etc.) have
been modified to guarantee that the argument is
not evaluated twice, making them less prone to macro
side-effects. However, since there exists the possibility
of additional stack use if a particular compiler cannot
optimize them (such as in the debug generation case),
the original macros are optionally available.  Note that
some invocations of the return_VALUE macro may now cause
size mismatch warnings; the return_UINT8 and return_UINT32
macros are provided to eliminate these. (From Randy Dunlap)

Implemented a new mechanism to enable debug tracing for
individual control methods. A new external interface,
acpi_debug_trace(), is provided to enable this mechanism. The
intent is to allow the host OS to easily enable and disable
tracing for problematic control methods. This interface
can be easily exposed to a user or debugger interface if
desired. See the file psxface.c for details.

acpi_ut_callocate() will now return a valid pointer if a
length of zero is specified - a length of one is used
and a warning is issued. This matches the behavior of
acpi_ut_allocate().
Signed-off-by: NBob Moore <robert.moore@intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

Signed-off-by: NLen Brown <len.brown@intel.com>

Signed-off-by: NLen Brown <len.brown@intel.com>

Signed-off-by: NPavel Machek <pavel@suse.cz>
Signed-off-by: NLen Brown <len.brown@intel.com>

Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLen Brown <len.brown@intel.com>

ACPI now uses kmalloc(...,GPF_ATOMIC) during suspend/resume.

http://bugzilla.kernel.org/show_bug.cgi?id=3469Signed-off-by: NDavid Shaohua Li <shaohua.li@intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

This patch disables the PCI Interrupt Link refernece counts,
which should not co-exist with the 2.6.12 irq_router.resume
method or else a double acpi_pci_link_set() could result
on resume.
Signed-off-by: NDavid Shaohua Li <shaohua.li@intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

If there are devices that use interrupts over a suspend event, ACPI must
restore the PCI interrupt links on resume.  Anything else breaks any
device that hasn't been converted to the new (dubious) PM rules.

Drivers that need the irq free/re-aquire sequence can be done one by one
independently of this one.

Add reference count and disable ACPI PCI Interrupt Link
when no device still uses it.

Warn when drivers have not released Link at suspend time.

http://bugzilla.kernel.org/show_bug.cgi?id=3469Signed-off-by: NDavid Shaohua Li <shaohua.li@intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

http://bugme.osdl.org/show_bug.cgi?id=4016Written-by: NDavid Shaohua Li <shaohua.li@intel.com>
Acked-by: NAdam Belay <abelay@novell.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

Delete PCI Interrupt Link Device .resume method --
it is the device driver's job to request interrupts,
not the Link's job to remember what the devices want.

This addresses the issue of attempting to run
the ACPI interpreter too early in resume, when
interrupts are still disabled.

http://bugzilla.kernel.org/show_bug.cgi?id=3469Signed-off-by: NDavid Shaohua Li <shaohua.li@intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!