CAVIUM_OCTEON_SOC most place we used to use CPU_CAVIUM_OCTEON.  This
allows us to CPU_CAVIUM_OCTEON in places where we have no OCTEON SOC.

Remove CAVIUM_OCTEON_SIMULATOR as it doesn't really do anything, we can
get the same configuration with CAVIUM_OCTEON_SOC.
Signed-off-by: NDavid Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Cc: linux-ide@vger.kernel.org
Cc: linux-edac@vger.kernel.org
Cc: linux-i2c@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: spi-devel-general@lists.sourceforge.net
Cc: devel@driverdev.osuosl.org
Cc: linux-usb@vger.kernel.org
Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: NWolfram Sang <wsa@the-dreams.de>
Acked-by: NMauro Carvalho Chehab <mchehab@redhat.com>
Patchwork: https://patchwork.linux-mips.org/patch/5295/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The irqdomain core will report a log message for any attempted map call
that fails unless the error code is -EPERM. This patch changes the
Versatile irq controller drivers to use -EPERM because it is normal for
a subset of the IRQ inputs to be marked as reserved on the various
Versatile platforms.
Signed-off-by: NGrant Likely <grant.likely@linaro.org>

Commit 9f29ab11 ("ACPI / scan: do not match drivers against objects
having scan handlers") introduced a boot regression on Tony's ia64 HP
rx2600.  Tony says:

  "It panics with the message:

   Kernel panic - not syncing: Unable to find SBA IOMMU: Try a generic or DIG kernel

   [...] my problem comes from arch/ia64/hp/common/sba_iommu.c
   where the code in sba_init() says:

        acpi_bus_register_driver(&acpi_sba_ioc_driver);
        if (!ioc_list) {

   but because of this change we never managed to call ioc_init()
   so ioc_list doesn't get set up, and we die."

Revert it to avoid this breakage and we'll fix the problem it attempted
to address later.
Reported-by: NTony Luck <tony.luck@gmail.com>
Cc: 3.9+ <stable@vger.kernel.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When user interrupts ongoing transfers the dmatest may end up with console
lockup, oops, or data mismatch. This patch prevents user to abort any ongoing
test.

Documentation is updated accordingly.
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Reported-by: NWill Deacon <will.deacon@arm.com>
Tested-by: NWill Deacon <will.deacon@arm.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>

Commit b3785492 (ACPI / PM: Do not power manage devices in unknown
initial states) added code to force devices without _PSC, but having
_PS0 defined in the ACPI namespace, into ACPI power state D0 by
executing _PS0 for them.  That turned out to break Toshiba P870-303,
however, so revert that code.

References: https://bugzilla.kernel.org/show_bug.cgi?id=58201Reported-and-tested-by: NJerome Cantenot <jerome.cantenot@gmail.com>
Tracked-down-by: NLan Tianyu <tianyu.lan@intel.com>
Cc: 3.9+ <stable@vger.kernel.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Per some ZTE Linux drivers I found for the AC2716, the following patch
moves most ZTE CDMA devices from option to zte_ev.  The blacklist stuff
that option does is not required with zte_ev, because it doesn't
implement any of the send_setup hooks which the blacklist suppressed.

I did not move the 2718 over because I could not find any ZTE Linux
drivers for that device, nor even any Windows drivers.
Signed-off-by: NDan Williams <dcbw@redhat.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The mode used by Windows for the Huawei E1820 will use the
same ff/ff/ff class codes for both serial and network
functions.
Reported-by: NGraham Inggs <graham.inggs@uct.ac.za>
Signed-off-by: NBjørn Mork <bjorn@mork.no>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

When configuring the port (e.g. set_termios) the port minor number
rather than the port number was used in the request (and they only
coincide for minor number 0).

Cc: stable@vger.kernel.org
Signed-off-by: NJohan Hovold <jhovold@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix regression introduced by commit 143d9d96 ("USB: serial: add
tiocmiwait subdriver operation") which made the ioctl operation return
ENODEV rather than ENOIOCTLCMD when a subdriver TIOCMIWAIT
implementation is missing.
Signed-off-by: NJohan Hovold <jhovold@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

devtmpfs_delete_node() calls devnode() callback with mode==NULL but
vfio still tries to write there.

The patch fixes this.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>

clk_set_rate() isn't supposed to accept approximate frequencies, instead
a supported frequency should be obtained from clk_round_rate() and then
used to set the clock.
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: NShawn Guo <shawn.guo@linaro.org>
Acked-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Jiri Kosina <jkosina@suse.cz> and Borislav Petkov <bp@alien8.de>
reported the warning:

[   51.616759] ------------[ cut here ]------------
[   51.621460] WARNING: at arch/x86/kernel/smp.c:123 native_smp_send_reschedule+0x58/0x60()
[   51.629638] Modules linked in: ext2 vfat fat loop snd_hda_codec_hdmi usbhid snd_hda_codec_realtek coretemp kvm_intel kvm snd_hda_intel snd_hda_codec crc32_pclmul crc32c_intel ghash_clmulni_intel snd_hwdep snd_pcm aesni_intel sb_edac aes_x86_64 ehci_pci snd_page_alloc glue_helper snd_timer xhci_hcd snd iTCO_wdt iTCO_vendor_support ehci_hcd edac_core lpc_ich acpi_cpufreq lrw gf128mul ablk_helper cryptd mperf usbcore usb_common soundcore mfd_core dcdbas evdev pcspkr processor i2c_i801 button microcode
[   51.675581] CPU: 0 PID: 244 Comm: kworker/1:1 Tainted: G        W    3.10.0-rc1+ #10
[   51.683407] Hardware name: Dell Inc. Precision T3600/0PTTT9, BIOS A08 01/24/2013
[   51.690901] Workqueue: events od_dbs_timer
[   51.695069]  0000000000000009 ffff88043a2f5b68 ffffffff8161441c ffff88043a2f5ba8
[   51.702602]  ffffffff8103e540 0000000000000033 0000000000000001 ffff88043d5f8000
[   51.710136]  00000000ffff0ce1 0000000000000001 ffff88044fc4fc08 ffff88043a2f5bb8
[   51.717691] Call Trace:
[   51.720191]  [<ffffffff8161441c>] dump_stack+0x19/0x1b
[   51.725396]  [<ffffffff8103e540>] warn_slowpath_common+0x70/0xa0
[   51.731473]  [<ffffffff8103e58a>] warn_slowpath_null+0x1a/0x20
[   51.737378]  [<ffffffff81025628>] native_smp_send_reschedule+0x58/0x60
[   51.744013]  [<ffffffff81072cfd>] wake_up_nohz_cpu+0x2d/0xa0
[   51.749745]  [<ffffffff8104f6bf>] add_timer_on+0x8f/0x110
[   51.755214]  [<ffffffff8105f6fe>] __queue_delayed_work+0x16e/0x1a0
[   51.761470]  [<ffffffff8105f251>] ? try_to_grab_pending+0xd1/0x1a0
[   51.767724]  [<ffffffff8105f78a>] mod_delayed_work_on+0x5a/0xa0
[   51.773719]  [<ffffffff814f6b5d>] gov_queue_work+0x4d/0xc0
[   51.779271]  [<ffffffff814f60cb>] od_dbs_timer+0xcb/0x170
[   51.784734]  [<ffffffff8105e75d>] process_one_work+0x1fd/0x540
[   51.790634]  [<ffffffff8105e6f2>] ? process_one_work+0x192/0x540
[   51.796711]  [<ffffffff8105ef22>] worker_thread+0x122/0x380
[   51.802350]  [<ffffffff8105ee00>] ? rescuer_thread+0x320/0x320
[   51.808264]  [<ffffffff8106634a>] kthread+0xea/0xf0
[   51.813200]  [<ffffffff81066260>] ? flush_kthread_worker+0x150/0x150
[   51.819644]  [<ffffffff81623d5c>] ret_from_fork+0x7c/0xb0
[   51.918165] nouveau E[     DRM] GPU lockup - switching to software fbcon
[   51.930505]  [<ffffffff81066260>] ? flush_kthread_worker+0x150/0x150
[   51.936994] ---[ end trace f419538ada83b5c5 ]---

It was caused by the policy->cpus changed during the process of
__gov_queue_work(), in other word, cpu offline happened.

Use get/put_online_cpus() to prevent the offline from happening while
__gov_queue_work() is running.

[rjw: The problem has been present since recent commit 031299b3
(cpufreq: governors: Avoid unnecessary per cpu timer interrupts)]

References: https://lkml.org/lkml/2013/6/5/88Reported-by: NBorislav Petkov <bp@alien8.de>
Reported-and-tested-by: NJiri Kosina <jkosina@suse.cz>
Signed-off-by: NMichael Wang <wangyun@linux.vnet.ibm.com>
Acked-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

With the introduction of ACPI scan handlers, an ACPI device object
with an ACPI scan handler attached to it must not be bound to an ACPI
driver any more.  Therefore it doesn't make sense to match those
ACPI device objects against a newly registered ACPI driver in
acpi_bus_match(), so make that function return 0 if the device
object passed to it has an ACPI scan handler attached.

This also addresses a regression related to a broken ACPI table in
the BIOS, where it has defined a _ROM method under the PCI root
bridge object.  This causes the video module to treat that object
as a display controller device (since only display devices are
supposed to have a _ROM method defined according to the ACPI spec).
As a result, the ACPI video driver binds to the PCI root bridge
object and overwrites the previously assigned driver_data field of
it, causing subsequent calls to acpi_get_pci_dev() to fail.

[rjw: Subject and changelog]
References: https://bugzilla.kernel.org/show_bug.cgi?id=58091Reported-by: NJason Cassell <bluesloth600@gmail.com>
Reported-and-bisected-by: NDmitry S. Demin <dmitryy.demin@gmail.com>
Cc: 3.9+ <stable@kernel.org>
Signed-off-by: NAaron Lu <aaron.lu@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Fix to return a negative error code in the acpi_gsi_to_irq() and
request_irq() error handling case instead of 0, as done elsewhere
in this function.
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Reviewed-by: NHuang Ying <ying.huang@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Commit 4b31e774 (Always set P-state on initialization) fixed bug
#4634 and caused the driver to always set the target P-State at
least once since the initial P-State may not be the desired one.
Commit 5a1c0228 (cpufreq: Avoid calling cpufreq driver's target()
routine if target_freq == policy->cur) caused a regression in
this behavior.

This fixes the regression by setting policy->cur based on the CPU's
target frequency rather than the CPU's current reported frequency
(which may be different).  This means that the P-State will be set
initially if the CPU's target frequency is different from the
governor's target frequency.

This fixes an issue where setting the default governor to
performance wouldn't correctly enable turbo mode on all cores.
Signed-off-by: NRoss Lagerwall <rosslagerwall@gmail.com>
Reviewed-by: NLen Brown <len.brown@intel.com>
Acked-by: NViresh Kumar <viresh.kumar@linaro.org>
Cc: 3.8+ <stable@vger.kernel.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Regression from merging the old nv50/nvd9 code together, and may be
needed to fully fix fdo#64904.

The value is ignored completely by the hardware starting from nva3.
Reported-by: NEmil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

fdo#64904
Reported-by: NGerhard Bräunlich <wippbox@gmx.net>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Reported-by: NMaarten Maathuis <madman2003@gmail.com>
Reported-by: NSven Joachim <svenjoac@gmx.de>
Reported-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Code refactoring in commit 8e9e3d2d
(drm/nv84/disp: move hdmi control into core) disabled HDMI audio on my
nv84 by removing too much old code without adding it in the new one.
This patch adds the missing code within the new code layout resulting in
HDMI audio working again.
It should work on any HDMI head, but due to lacking ahrdware I could
only test the (1st) one.
It also might be possible that similar code is needed for nva3, which I
can't test.
Signed-off-by: NAlexander Stein <alexander.stein@informatik.tu-chemnitz.de>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Commit 091f0ea3 "tg3: Add New 5719 Read
DMA workaround" added a workaround for TX DMA stall on the 5719. This
workaround needs to be applied to the 5720 as well.

Cc: stable@vger.kernel.org
Reported-by: NRoland Dreier <roland@purestorage.com>
Tested-by: NRoland Dreier <roland@purestorage.com>
Signed-off-by: NNithin Nayak Sujir <nsujir@broadcom.com>
Signed-off-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch sets the protocol selector bits (4:0) of the PHY's MII_ADVERTISE
register (ANAR) when writing ADVERTISE_ALL. The protocol selector bits are
indicating IEEE 803.3u support and are fixed / read-only on some PHYs. Not
setting them correctly on others (like TI DP83630) makes the PHY fall back
to 10M HDX mode which should be avoided.

Tested for TI DP83630 PHY on Microblaze platform.
Signed-off-by: NJens Renner <renner@efe-gmbh.de>
Tested-by: NMichal Simek <monstr@monstr.eu>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It was recently found out that GSO on 57710/57711 was broken, due to packets
being sent without a valid IP checksum.

Commit 057cf65e "bnx2x: Fix GSO for 57710/57711 chips" partially fixed this
issue, but failed to set the correct IP checksum when receiving GSO packets
via bridges, as such packets enter bnx2x_tx_split() and the FW flags needed
to calculate IP checksum were erroneously set in the incorrect
buffer descriptor.

This patch re-enables GSO in said scenario for 57710/57711 chips.
Signed-off-by: NYuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: NAriel Elior <ariele@broadcom.com>
Signed-off-by: NEilon Greenstein <eilong@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The following backtrace is reported with CONFIG_PROVE_RCU:

    drivers/infiniband/hw/qib/qib_keys.c:64 suspicious rcu_dereference_check() usage!
    other info that might help us debug this:
    rcu_scheduler_active = 1, debug_locks = 1
    4 locks held by kworker/0:1/56:
    #0:  (events){.+.+.+}, at: [<ffffffff8107a4f5>] process_one_work+0x165/0x4a0
    #1:  ((&wfc.work)){+.+.+.}, at: [<ffffffff8107a4f5>] process_one_work+0x165/0x4a0
    #2:  (device_mutex){+.+.+.}, at: [<ffffffffa0148dd8>] ib_register_device+0x38/0x220 [ib_core]
    #3:  (&(&dev->lk_table.lock)->rlock){......}, at: [<ffffffffa017e81c>] qib_alloc_lkey+0x3c/0x1b0 [ib_qib]

    stack backtrace:
    Pid: 56, comm: kworker/0:1 Not tainted 3.10.0-rc1+ #6
    Call Trace:
    [<ffffffff810c0b85>] lockdep_rcu_suspicious+0xe5/0x130
    [<ffffffffa017e8e1>] qib_alloc_lkey+0x101/0x1b0 [ib_qib]
    [<ffffffffa0184886>] qib_get_dma_mr+0xa6/0xd0 [ib_qib]
    [<ffffffffa01461aa>] ib_get_dma_mr+0x1a/0x50 [ib_core]
    [<ffffffffa01678dc>] ib_mad_port_open+0x12c/0x390 [ib_mad]
    [<ffffffff810c2c55>] ?  trace_hardirqs_on_caller+0x105/0x190
    [<ffffffffa0167b92>] ib_mad_init_device+0x52/0x110 [ib_mad]
    [<ffffffffa01917c0>] ?  sl2vl_attr_show+0x30/0x30 [ib_qib]
    [<ffffffffa0148f49>] ib_register_device+0x1a9/0x220 [ib_core]
    [<ffffffffa01b1685>] qib_register_ib_device+0x735/0xa40 [ib_qib]
    [<ffffffff8106ba98>] ? mod_timer+0x118/0x220
    [<ffffffffa017d425>] qib_init_one+0x1e5/0x400 [ib_qib]
    [<ffffffff812ce86e>] local_pci_probe+0x4e/0x90
    [<ffffffff81078118>] work_for_cpu_fn+0x18/0x30
    [<ffffffff8107a566>] process_one_work+0x1d6/0x4a0
    [<ffffffff8107a4f5>] ?  process_one_work+0x165/0x4a0
    [<ffffffff8107c9c9>] worker_thread+0x119/0x370
    [<ffffffff8107c8b0>] ?  manage_workers+0x180/0x180
    [<ffffffff8108294e>] kthread+0xee/0x100
    [<ffffffff81082860>] ?  __init_kthread_worker+0x70/0x70
    [<ffffffff815c04ac>] ret_from_fork+0x7c/0xb0
    [<ffffffff81082860>] ?  __init_kthread_worker+0x70/0x70

Per Documentation/RCU/lockdep-splat.txt, the code now uses rcu_access_pointer()
vs. rcu_dereference().
Reported-by: NJay Fenlason <fenlason@redhat.com>
Reviewed-by: NDean Luick <dean.luick@intel.com>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Add Mellanox copyright to the iser initiator source code which I maintain.
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

Change the code to destroy the "last opened" rdma_cm id after making
sure we released all other objects (QP, CQs, PD, etc) associated with
the IB device.

Since iser accesses the IB device using the rdma_cm id, we need to
free any objects that are related to the device that is associated
with the rdma_cm id prior to destroying that id.  When this isn't
done, the low level driver that created this device can be unloaded
before iser has a chance to free all the objects and a such a call may
invoke code segment which isn't valid any more and crash.

Cc: Sean Hefty <sean.hefty@intel.com
Signed-off-by: NRoi Dayan <roid@mellanox.com>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NRoland Dreier <roland@purestorage.com>

If no valid MAC address could be obtained from the hardware,
fall back to a randomly generated one.
Signed-off-by: NPavel Machek <pavel@denx.de>
Signed-off-by: NLucas Stach <l.stach@pengutronix.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

FW was initialized with data from wrong header, this caused TSO packets
have wrong IP csum.
Signed-off-by: NDmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: NAriel Elior <ariele@broadcom.com>
Signed-off-by: NEilon Greenstein <eilong@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

MAC addresses assigned by the PF to VFs were not kept in the PF driver
admin table. As a result, displaying the VF MACs from the PF interface
to user space showed zero address where in fact the VF got non-zero
address from the PF, fix that.
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When a VF sense they didn't get MAC address, use random one. This will
address the case of administrator not assigning MAC to the VF through
the PF OS APIs and keep udev happy.
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In the PF initialization, SRIOV is enabled before the PF is fully initialized.
This allows the kernel to probe the newly-exposed VFs before the PF is ready
to handle them (nested probes).

Have the probe method return the -EPROBE_DEFER value in this situation (instead
of the VF probe method retrying its initialization in a loop, and returning -EIO
on failure). When -EPROBE_DEFER is returned by the VF probe method, the kernel
itself will retry the probe after a suitable delay.

Based upon a suggestion by Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: NJack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When turning on adaptive_rx under adaptive moderation, the CQ's moderation
count wasn't updated according to rx_frames which resulted in too many
interrupts and bandwidth drop.
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NAmir Vadai <amirv@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com>
Reviewed-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

The code uses

    return foo;
    goto err_type;

when instead the form should have been

    ret = foo;
    goto err_type;

Here this causes a useful iio_device_put to be skipped.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

If we pass an invalid clock type then "ts" is never set.  We need to
check for errors earlier, otherwise we end up passing uninitialized
stack data to userspace.
Reported-by: NJohn Stultz <john.stultz@linaro.org>
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Reported-by: NMichał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: NJonathan Cameron <jic23@kernel.org>

The register access to enable hardware flow control depends on the
device port number and not the port minor number.

Cc: stable@vger.kernel.org
Signed-off-by: NJohan Hovold <jhovold@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove the no longer used endpoint-array access completely.
Signed-off-by: NJohan Hovold <jhovold@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The outcont_endpoints array was indexed using the port minor number
(which can be greater than the array size) rather than the device port
number.

Cc: stable@vger.kernel.org
Signed-off-by: NJohan Hovold <jhovold@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove bogus port-number check in open and close, which prevented this
driver from being used with a minor number different from zero.

Cc: stable@vger.kernel.org
Signed-off-by: NJohan Hovold <jhovold@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>