- 24 7月, 2010 1 次提交
-
-
由 Ursula Braun 提交于
This patch serializes device removal and other sysfs-triggered configurations by moving removal of sysfs-attributes to the beginning of the remove functions. And it serializes online/offline setting and discipline-switching (causing reestablishing of the net_device) by making use of a new discipline mutex. Signed-off-by: NUrsula Braun <ursula.braun@de.ibm.com> Signed-off-by: NFrank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 24 6月, 2010 2 次提交
-
-
由 Frank Blaschka 提交于
Turning on memory debugging showed there could be page breaks in hardware headers. OSA does not allow this so we had to add code to bounce the header in case there is a page break. This patch also fixes a problem in case the skb->data part of a fragmented skb spreads multiple pages. Signed-off-by: NFrank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Carsten Otte 提交于
This patch removes the qeth_trace debug area. All relevant data is logged into either qeth_setup or into each card's own debug area. Superfluous information (such as the card number when logging into the card's own debug area) is removed without replacement. Signed-off-by: NCarsten Otte <cotte@de.ibm.com> Signed-off-by: NFrank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 5月, 2010 1 次提交
-
-
由 Ursula Braun 提交于
The qeth driver is enabled to support the new OSA CHPID types OSX and OSM. Signed-off-by: NUrsula Braun <ursula.braun@de.ibm.com> Signed-off-by: NFrank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 16 5月, 2010 1 次提交
-
-
由 Frank Blaschka 提交于
Synchronize access to the drivers configuration interface. Also do not allow configuration changes during online/offline transition. Signed-off-by: NFrank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 4月, 2010 1 次提交
-
-
由 Jiri Pirko 提交于
Converts the list and the core manipulating with it to be the same as uc_list. +uses two functions for adding/removing mc address (normal and "global" variant) instead of a function parameter. +removes dev_mcast.c completely. +exposes netdev_hw_addr_list_* macros along with __hw_addr_* functions for manipulation with lists on a sandbox (used in bonding and 80211 drivers) Signed-off-by: NJiri Pirko <jpirko@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 30 3月, 2010 1 次提交
-
-
由 Tejun Heo 提交于
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: NTejun Heo <tj@kernel.org> Guess-its-ok-by: NChristoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
-
- 17 3月, 2010 1 次提交
-
-
由 Jiri Pirko 提交于
In mlx4, using char * to store mc address in private structure instead. Signed-off-by: NJiri Pirko <jpirko@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 10 3月, 2010 1 次提交
-
-
由 Ursula Braun 提交于
Depending on their definition in z/VM, virtual devices for z/VM VSWITCH or GuestLAN must be configured either in layer2 or in layer3 mode. If qeth detects a layer mismatch, device activation fails. Trying to recover from this error cannot help; thus scheduling a recovery should be avoided. In addition, since recovery is forbidden during online setting of a qeth device, existence of its network device is guaranteed for all dev_close() calls in qeth. The corresponding checks can be removed. Signed-off-by: NUrsula Braun <ursula.braun@de.ibm.com> Signed-off-by: NFrank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 1月, 2010 1 次提交
-
-
由 Jiri Pirko 提交于
This patch introduces three macros to work with uc list from net drivers. Signed-off-by: NJiri Pirko <jpirko@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 14 1月, 2010 2 次提交
-
-
由 Ursula Braun 提交于
If a qeth device is set online, several initialisation steps are performed. If a failure in one of these steps occurs, the qeth device is reset into DOWN state. If due to the failure a qeth recovery is scheduled and started in another thread, this might cause all kinds of conflicts, even a kernel panic. The patch forbids scheduling of a qeth recovery while online processing is performed till the card is in state SOFTSETUP. Signed-off-by: NUrsula Braun <ursula.braun@de.ibm.com> Signed-off-by: NFrank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ursula Braun 提交于
New feature to trace HiperSockets network traffic for debugging purposes. Signed-off-by: NUrsula Braun <ursula.braun@de.ibm.com> Signed-off-by: NFrank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 30 12月, 2009 1 次提交
-
-
由 H Hartley Sweeten 提交于
Use the %pM kernel extension to display the MAC address. Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 16 11月, 2009 3 次提交
-
-
由 Frank Blaschka 提交于
The maximum TSO size OSA can handle is 15 * PAGE_SIZE. This patch reduces gso_max_size to this value and adds some sanity checks and statistics to the TSO implementation. Since only layer 3 is able to do TSO move all TSO related functions to the qeth_l3 module. Signed-off-by: NFrank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ursula Braun 提交于
Setting a qeth device online requires to call function ccw_device_set_online() for read-, write-, and data-subchannel. Failures should be detected immediately without an attempt to invoke follow-on activity qeth_qdio_clear_card()., In addition, ccw_device_set_online calls are consolidated in qeth_core_main.c only. Signed-off-by: NUrsula Braun <ursula.braun@de.ibm.com> Signed-off-by: NFrank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Einar Lueck 提交于
Isolate data connection to a shared OSA card against other data connections to the same OSA card. Connectivity between isolated data connections sharing the same OSA card is therefore possible only through external network gear (e.g. a router). Signed-off-by: NEinar Lueck <elelueck@de.ibm.com> Signed-off-by: NFrank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 05 10月, 2009 1 次提交
-
-
由 Ben Hutchings 提交于
This string query operation was supposed to be replaced by the generic get_sset_count() starting in 2007. Convert qeth's implementation. Signed-off-by: NBen Hutchings <bhutchings@solarflare.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 03 9月, 2009 1 次提交
-
-
由 Eric Dumazet 提交于
The generic packet receive code takes care of setting netdev->last_rx when necessary, for the sake of the bonding ARP monitor. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Acked-by: NNeil Horman <nhorman@txudriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 9月, 2009 1 次提交
-
-
由 Stephen Hemminger 提交于
No need to put ethtool_ops in data, they should be const. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 27 8月, 2009 1 次提交
-
-
由 Klaus-Dieter Wacker 提交于
Clear separation of cast-type determination (send path) for layer-2 resp. layer-3. Allowing to have inline functions for qeth layer- discipline. Signed-off-by: NKlaus-Dieter Wacker <kdwacker@de.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 06 7月, 2009 1 次提交
-
-
由 Patrick McHardy 提交于
This patch converts the remaining occurences of raw return values to their symbolic counterparts in ndo_start_xmit() functions that were missed by the previous automatic conversion. Additionally code that assumed the symbolic value of NETDEV_TX_OK to be zero is changed to explicitly use NETDEV_TX_OK. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 6月, 2009 1 次提交
-
-
由 Jiri Pirko 提交于
This patch is inspired by patch recently posted by Johannes Berg. Basically what my patch does is to group list and a count of addresses into newly introduced structure netdev_hw_addr_list. This brings us two benefits: 1) struct net_device becames a bit nicer. 2) in the future there will be a possibility to operate with lists independently on netdevices (with exporting right functions). I wanted to introduce this patch before I'll post a multicast lists conversion. Signed-off-by: NJiri Pirko <jpirko@redhat.com> drivers/net/bnx2.c | 4 +- drivers/net/e1000/e1000_main.c | 4 +- drivers/net/ixgbe/ixgbe_main.c | 6 +- drivers/net/mv643xx_eth.c | 2 +- drivers/net/niu.c | 4 +- drivers/net/virtio_net.c | 10 ++-- drivers/s390/net/qeth_l2_main.c | 2 +- include/linux/netdevice.h | 17 +++-- net/core/dev.c | 130 ++++++++++++++++++-------------------- 9 files changed, 89 insertions(+), 90 deletions(-) Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 16 6月, 2009 1 次提交
-
-
由 Frank Blaschka 提交于
Signed-off-by: NFrank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 30 5月, 2009 1 次提交
-
-
由 Jiri Pirko 提交于
This patch converts unicast address list to standard list_head using previously introduced struct netdev_hw_addr. It also relaxes the locking. Original spinlock (still used for multicast addresses) is not needed and is no longer used for a protection of this list. All reading and writing takes place under rtnl (with no changes). I also removed a possibility to specify the length of the address while adding or deleting unicast address. It's always dev->addr_len. The convertion touched especially e1000 and ixgbe codes when the change is not so trivial. Signed-off-by: NJiri Pirko <jpirko@redhat.com> drivers/net/bnx2.c | 13 +-- drivers/net/e1000/e1000_main.c | 24 +++-- drivers/net/ixgbe/ixgbe_common.c | 14 ++-- drivers/net/ixgbe/ixgbe_common.h | 4 +- drivers/net/ixgbe/ixgbe_main.c | 6 +- drivers/net/ixgbe/ixgbe_type.h | 4 +- drivers/net/macvlan.c | 11 +- drivers/net/mv643xx_eth.c | 11 +- drivers/net/niu.c | 7 +- drivers/net/virtio_net.c | 7 +- drivers/s390/net/qeth_l2_main.c | 6 +- drivers/scsi/fcoe/fcoe.c | 16 ++-- include/linux/netdevice.h | 18 ++-- net/8021q/vlan.c | 4 +- net/8021q/vlan_dev.c | 10 +- net/core/dev.c | 195 +++++++++++++++++++++++++++----------- net/dsa/slave.c | 10 +- net/packet/af_packet.c | 4 +- 18 files changed, 227 insertions(+), 137 deletions(-) Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 21 5月, 2009 2 次提交
-
-
由 Ursula Braun 提交于
z/VM Virtual Switch Port Isolation allows guests on a VLAN UNAWARE virtual switch to be isolated from other guests on the VSWITCH. (See z/VM Apars VM64281 and VM64463). The Linux qeth driver is affected, because it has to handle new error codes introduced with the z/VM VSWITCH Port Isolation support. Signed-off-by: NUrsula Braun <ursula.braun@de.ibm.com> Signed-off-by: NFrank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ursula Braun 提交于
If a qeth device is plugged off, setting the device online stops in state HARDSETUP and a failure is reported to the base cio-layer causing halt/clear to be invoked. Replugging the device again triggers a qeth recovery without notification of the cio-layer. If a device is ungrouped in this state, the qeth set_offline function is not invoked, because the corresponding ccwgroup device is not in state ONLINE. Then incoming traffic is still handled by the qdio layer resulting in a crash in qeth_l<x>_qdio_input_handler, because (part of) the qeth data structures for this device are already removed. Solution: After replugging the device qeth recovery should lead to a working net device. Thus a "LAN offline" result when setting a qeth device online must not report a failure to the base cio-layer. Signed-off-by: NUrsula Braun <ursula.braun@de.ibm.com> Signed-off-by: NFrank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 25 3月, 2009 4 次提交
-
-
由 Ursula Braun 提交于
When a recovery is started for a qeth device, additional invocations to change a mac address, to configure a VLAN interface on top, or to add multicast addresses should wait till recovery is finished, otherwise recovery might fail. Signed-off-by: NUrsula Braun <ursula.braun@de.ibm.com> Signed-off-by: NFrank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Klaus-Dieter Wacker 提交于
qeth: Unregister MAC addresses from device (layer 2) during recovery cycle. When the device is set online the MAC addresses are registered again on the device. Signed-off-by: NKlaus-Dieter Wacker <kdwacker@de.ibm.com> Signed-off-by: NFrank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Frank Blaschka 提交于
Performance measurements showed EDDP does not lower CPU costs but increase them. So we dump out EDDP code from qeth driver. Signed-off-by: NFrank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Frank Blaschka 提交于
Add statistics counter for software tx checksumming. Signed-off-by: NFrank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 1月, 2009 1 次提交
-
-
由 Frank Blaschka 提交于
Have separate netdev_ops for OSA and HiperSocket/TR. Signed-off-by: NFrank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 09 1月, 2009 1 次提交
-
-
由 Frank Blaschka 提交于
qeth_l2, qeth_l3 convert to net_device_ops. qeth_l3 remove vlan neigh_setup hack since it does not work any longer with the new net_device_ops. Signed-off-by: NFrank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 07 1月, 2009 1 次提交
-
-
由 Mark McLoughlin 提交于
Replace s390_root_dev_register() with root_device_register() etc. [Includes fix from Cornelia Huck] Signed-off-by: NMark McLoughlin <markmc@redhat.com> Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 05 1月, 2009 1 次提交
-
-
由 Ursula Braun 提交于
For z/VM GuestLAN or VSWITCH devices the transport layer is configured in z/VM. The layer2 attribute of a participating Linux device has to match the z/VM definition. In case of a mismatch Linux currently crashes in qeth recovery due to a reference to the not yet existing net_device. Solution: add a check for existence of net_device and add a message pointing to the mismatch of layer definitions in Linux and z/VM. Signed-off-by: NUrsula Braun <ursula.braun@de.ibm.com> Signed-off-by: NFrank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 25 12月, 2008 1 次提交
-
-
由 Frank Blaschka 提交于
Signed-off-by: NFrank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 28 10月, 2008 3 次提交
-
-
由 Johannes Berg 提交于
A number of places still use %02x:...:%02x because it's in debug statements or for no real reason. Make a few of them use %pM. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ursula Braun 提交于
To make the qeth driver more robust in case of malformatted inbound packets due to hardware problems, an additional check for OSN-card-type is added for OSN-type packets. Signed-off-by: NUrsula Braun <ursula.braun@de.ibm.com> Signed-off-by: NFrank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Ursula Braun 提交于
IP-threads have been removed from the qeth driver. Only the recover-thread is left over. This makes checkings for non-recover threads superfluous. Signed-off-by: NUrsula Braun <ursula.braun@de.ibm.com> Signed-off-by: NFrank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
- 25 9月, 2008 2 次提交
-
-
由 Ursula Braun 提交于
Do not touch IFF_UP flag during qeth recovery, but invoke dev_close() in case of failing recovery. Cancel outstanding control commands in case of Data Checks or Channel Checks. Do not invoke qeth_l2_del_all_mc() in case of a hard stop to speed up removal of qeth devices. Signed-off-by: NUrsula Braun <ursula.braun@de.ibm.com> Signed-off-by: NFrank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Ursula Braun 提交于
Real HiperSocket devices in layer2 mode have a firmware-created MAC-address. This change enables the qeth driver to use this firmware MAC-address for layer2 HiperSocket devices. Signed-off-by: NUrsula Braun <ursula.braun@de.ibm.com> Signed-off-by: NFrank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-