- 21 11月, 2008 1 次提交
-
-
由 Stephen Hemminger 提交于
This patch moves neigh_setup and hard_start_xmit into the network device ops structure. For bisection, fix all the previously converted drivers as well. Bonding driver took the biggest hit on this. Added a prefetch of the hard_start_xmit in the fast path to try and reduce any impact this would have. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 11月, 2008 2 次提交
-
-
由 Stephen Hemminger 提交于
Convert this driver to network device ops. Compile tested only. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexey Dobriyan 提交于
CC [M] drivers/net/ixgbe/ixgbe_main.o drivers/net/ixgbe/ixgbe_main.c: In function `ixgbe_intr': drivers/net/ixgbe/ixgbe_main.c:1290: sorry, unimplemented: inlining failed in call to 'ixgbe_irq_enable': function body not available drivers/net/ixgbe/ixgbe_main.c:1312: sorry, unimplemented: called from here make[4]: *** [drivers/net/ixgbe/ixgbe_main.o] Error 1 Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Acked-by: NPeter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 16 11月, 2008 1 次提交
-
-
由 PJ Waskiewicz 提交于
netif_carrier_off() is sufficient to stop Tx into the driver. Stopping the Tx queues is redundant and unnecessary. By the same token, netif_carrier_on() will be sufficient to re-enable Tx, so waking the queues is unnecessary. Signed-off-by: NPeter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 13 11月, 2008 1 次提交
-
-
由 Wang Chen 提交于
We have some reasons to kill netdev->priv: 1. netdev->priv is equal to netdev_priv(). 2. netdev_priv() wraps the calculation of netdev->priv's offset, obviously netdev_priv() is more flexible than netdev->priv. But we cann't kill netdev->priv, because so many drivers reference to it directly. This patch is a safe convert for netdev->priv to netdev_priv(netdev). Since all of the netdev->priv is only for read. But it is too big to be sent in one mail. I split it to 4 parts and make every part smaller than 100,000 bytes, which is max size allowed by vger. Signed-off-by: NWang Chen <wangchen@cn.fujitsu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 11月, 2008 1 次提交
-
-
由 David S. Miller 提交于
The generic packet receive code takes care of setting netdev->last_rx when necessary, for the sake of the bonding ARP monitor. Drivers need not do it any more. Some cases had to be skipped over because the drivers were making use of the ->last_rx value themselves. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 11月, 2008 1 次提交
-
-
由 Jesse Brandeburg 提交于
Intel is currently shipping support for adapters with a phy that does 10GBase-T (copper), which is 10 Gigabit ethernet over standard Category 6 cabling. Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
- 28 10月, 2008 1 次提交
-
-
由 Johannes Berg 提交于
A number of places still use %02x:...:%02x because it's in debug statements or for no real reason. Make a few of them use %pM. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 16 10月, 2008 1 次提交
-
-
由 Jeff Garzik 提交于
We cannot select INTEL_IOATDMA in Kconfig as soon as MYRI10GE or IXGBE is enabled since the former is not available on all architectures. Just use a Kconfig bool {IXGBE,MYRI10GE}_DCA set to =y when DCA support can actually be built. [myri10ge portion written and signed-off-by] Brice Goglin <brice@myri.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
- 25 9月, 2008 28 次提交
-
-
由 Harvey Harrison 提交于
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Alexander Duyck 提交于
This patch cleans up some whitespace items, reorders a couple of functions, and removes some outdated comments. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Alexander Duyck 提交于
This patch corrects support for NAPI so that queues are correctly added and removed during suspend/resume in the event that the number of MSI-X vectors changes. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Peter P Waskiewicz 提交于
This patch cleans up a bit of whitespace issues with the driver, updates the copyright information, and bumps the version number up. Signed-off-by: NPeter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Jeff Kirsher 提交于
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Jesse Brandeburg 提交于
ixgbe_xmit_frame can be refactored to use fewer locals and better utilize common kernel macros. also fixed minor buglet with internal to driver vlan flag variable being passed incorrectly. Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Jesse Brandeburg 提交于
some functions were un-necessarily using local variables. Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Jesse Brandeburg 提交于
Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Jesse Brandeburg 提交于
This is partial preparation for a future patch which will extend ixgbe_set_num_queues Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Jesse Brandeburg 提交于
clean up the hardware shutdown sequence to prevent hardware from continuing to send when resetting or unloading. Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Jesse Brandeburg 提交于
This is a massive update that includes infrastructure for further patches where we will add support for more phy types and eeprom types. This code is shared as much as possible with other drivers, so the code may seem a little obtuse at times but wherever possible we keep to the linux style and methods. Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Jesse Brandeburg 提交于
in some configurations there can be more than one rx queue per vector in msi-x mode. Add functionality to be able to clean this without changing the performance path single-rx-queue cleanup. Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Jesse Brandeburg 提交于
Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Jesse Brandeburg 提交于
changing ring sizes in ethtool needs to be robust. If an allocation fails the driver must continue operation, with the previous settings. Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Jesse Brandeburg 提交于
Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Jesse Brandeburg 提交于
most of the time we only need 1500 bytes for a packet which means we don't need a whole 4k page for each packet. Share the allocation by using a reference count to the page and giving half to two receive descriptors. This can enable us to use packet split mode all the time due to the performance increase of allocating half the pages. Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Jesse Brandeburg 提交于
when using more than 8 tx queues you can overrun the 8 bit v_idx field, so change it to 16 bits to represent the maximum number of queues (one for each bit) Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Jesse Brandeburg 提交于
ixgbe was incorrectly setting the throttle rate setting for all tx queues and the driver has been refreshed to better handle a dynamic interrupt mode as well as multiple queues. Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Jesse Brandeburg 提交于
ethtool was not disabling the correct netif flags when setting checksum disable. Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Jeff Kirsher 提交于
Form: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Jesse Brandeburg 提交于
1) reading some of the registers in our hardware causes them to clear, so don't read ICR in the ethtool register dump function. 2) several register iterators were not iterating Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Jesse Brandeburg 提交于
Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Jesse Brandeburg 提交于
fix ixgbe bug reported with shared legacy interrupts Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Jesse Brandeburg 提交于
Upon review a buglet was found where link change was not causing an immediate link change event as it should. Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Jesse Brandeburg 提交于
This patch updates the link_up code and watchdog thread so that link_up doesn't cause stack overflows due to long waits in interrupt context. Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: NPeter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Jesse Brandeburg 提交于
after the most recent patches, the driver was not using the correct iterator for updating the receive address registers (RAR) Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Jesse Brandeburg 提交于
Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Jesse Brandeburg 提交于
Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
- 03 9月, 2008 3 次提交
-
-
由 Alexander Duyck 提交于
This change makes it so only one srrctl register is programmed per VMDq id, and if VMDq is not enabled it is one register per RSS queue. Currently this function is working correctly for the multiqueue RSS and single queue cases, but if any advances features such as VMDq or DCB would have been enabled this function would have caused issues as it was not correct. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 PJ Waskiewicz 提交于
Change TSO offloads to use a different context than VLAN insertion and Tx checksumming. Hardware has separate registers internally for storing these so use them. Signed-off-by: NPeter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Jesse Brandeburg 提交于
hardware was configured incorrectly which led all hints to be sent to queue[0]'s DCA configuration. Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-