- 27 3月, 2013 5 次提交
-
-
由 Tony Cheneau 提交于
Add pr_debug() call in order to debug 6LoWPAN fragmentation and reassembly. Signed-off-by: NTony Cheneau <tony.cheneau@amnesiak.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tony Cheneau 提交于
The first fragment, FRAG1, must contain some payload according to the specs. However, as it is currently written, the first fragment will remain empty and only contain the 6lowpan headers. This patch also extracts the transport layer information from the first fragment. This information is used later on when uncompressing UDP header. Thanks to Wolf-Bastian Pöttner for noticing that the offset value was not properly initialized. Signed-off-by: NTony Cheneau <tony.cheneau@amnesiak.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tony Cheneau 提交于
The IEEE 802.15.4 standard uses the 0xFFFF short address (2 bytes) for message broadcasting. Signed-off-by: NTony Cheneau <tony.cheneau@amnesiak.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tony Cheneau 提交于
This feature is especially important when using fragmentation, because the reassembly mechanism cannot recover from the loss of a fragment. Note that some hardware ignore this flag and not will not transmit acknowledgments even if this is set. Signed-off-by: NTony Cheneau <tony.cheneau@amnesiak.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tony Cheneau 提交于
This causes a drop of the UDP packet. Signed-off-by: NTony Cheneau <tony.cheneau@amnesiak.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 07 2月, 2013 2 次提交
-
-
由 Alexander Aring 提交于
head buffer is only temporary available in lowpan_header_create. So it's not necessary to put it on the heap. Also fixed a comment codestyle issue. Signed-off-by: NAlexander Aring <alex.aring@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
It's called from both __init and __exit code, so neither tag is appropriate. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 19 1月, 2013 2 次提交
-
-
由 Alan Ott 提交于
Handle the reception of uncompressed packets (dispatch type = IPv6). Signed-off-by: NAlan Ott <alan@signal11.us> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alan Ott 提交于
Refactor the handing of the skb's to the individual lowpan devices into a function. Signed-off-by: NAlan Ott <alan@signal11.us> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 12月, 2012 1 次提交
-
-
由 Alan Ott 提交于
Change the threshold for framentation of a lowpan packet from using the MTU size to now use the MTU size minus the checksum length, which is added by the hardware. For IEEE 802.15.4, this effectively changes it from 127 bytes to 125 bytes. Signed-off-by: NAlan Ott <alan@signal11.us> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 19 9月, 2012 1 次提交
-
-
由 Peter Senna Tschudin 提交于
Found by http://coccinelle.lip6.fr/Signed-off-by: NPeter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 9月, 2012 2 次提交
-
-
由 Alan Ott 提交于
Before, it was impossible to remove a wpan device which had lowpan attached to it. Signed-off-by: NAlan Ott <alan@signal11.us> Signed-off-by: NDavid S. Miller <davem@tempietto.lan>
-
由 Alan Ott 提交于
Since lowpan_process_data() modifies the skb (by calling skb_pull()), we need our own copy so that it doesn't affect the data received by other protcols (in this case, af_ieee802154). Signed-off-by: NAlan Ott <alan@signal11.us> Signed-off-by: NDavid S. Miller <davem@tempietto.lan>
-
- 17 7月, 2012 3 次提交
-
-
由 Tony Cheneau 提交于
Lenght field should be encoded using big endian byte order, such as intend in the specs. As it is currently written, the len field would not be decoded properly on an implementation using the correct byte ordering. Hence, it could lead to interroperability issues. Also, I rewrote the code so that iphc0 argument of lowpan_alloc_new_frame could be removed. Signed-off-by: NTony Cheneau <tony.cheneau@amnesiak.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tony Cheneau 提交于
The tag field should be stored and accessed using big endian byte order (as intended in the specs). Or else, when displayed with a trafic analyser, such a Wireshark, the field not properly displayed (e.g. 0x01 00 instead of 0x00 01, and so on). Signed-off-by: NTony Cheneau <tony.cheneau@amnesiak.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tony Cheneau 提交于
When a UDP packet gets fragmented, a crash will occur at reassembly time. This is because skb->transport_header is not set during earlier period of fragment reassembly. As a consequence, call to udp_hdr() return NULL and uh (which is NULL) gets dereferenced without much test. Signed-off-by: NTony Cheneau <tony.cheneau@amnesiak.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 12 7月, 2012 4 次提交
-
-
6lowpan module starts collecting incomming frames and fragments right after lowpan_module_init() therefor it will be better to clean unfinished fragments in lowpan_cleanup_module() function instead of doing it when link goes down. Changed spinlocks type to prevent deadlock with expired timer event and removed unused one. Signed-off-by: NAlexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
Function lowpan_alloc_new_frame() takes u8 tag as an argument. However, its only caller, lowpan_process_data() passes down a u16. Hence, the tag value can get corrupted. This prevent 6lowpan fragment reassembly of a message when the fragment tag value is over 256. Signed-off-by: NAlexander Smirnov <alex.bluesman.smirnov@gmail.com> Cc: Tony Cheneau <tony.cheneau@amnesiak.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
Use netdev_alloc_skb_ip_align() instead of alloc_skb() to get some extra headroom in case we need to forward this frame in a tunnel or something else. Signed-off-by: NAlexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
Revert the commit 768f7c7c to initialize spinlock in the more preferable way and make it static to avoid sparse warning. Signed-off-by: NAlexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 05 7月, 2012 1 次提交
-
-
This reverts the commit cdf49c28 which replaces lowpan '.ndo_set_mac_address' method by ethernet's one. Accorind to the IEEE 802.15.4 standard, device has 8-byte length address, so this hook loses the last 2 bytes which may rise a compatibility problems with other IEEE 802.15.4 standard implementations. Signed-off-by: NAlexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 27 6月, 2012 1 次提交
-
-
由 Dan Carpenter 提交于
We already unlocked a few lines earlier here, so we can go directly to drop without passing through unlock. This was introduced recently in c5d3687f ('6lowpan: read data from skb safely'). Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Acked-by: NAlexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 6月, 2012 3 次提交
-
-
Remove excessive __func__ argument in pr_debug function and some excessive debug messages. Signed-off-by: NAlexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
Add missing pointer shift for the 'default' case. Signed-off-by: NAlexander Smirnov <alex.bluesman.smirnov@gmail.com> Cc: Tony Cheneau <tony.cheneau+zigbeedev@amnesiak.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
Check if skb buffer can pull requested amount of bytes and return an error in opposite case. Signed-off-by: NAlexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 4月, 2012 5 次提交
-
-
The same macros is defined in 'include/net/af_ieee802154.h' and is called IEEE802154_ADDR_LEN. No need another one, so remove it. Signed-off-by: NAlexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
Separate frame allocation routine from data processing function. This makes code more human readable and easier for understanding. Signed-off-by: NAlexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
Add missing spin_lock_init() for frames list lock. Signed-off-by: NAlexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
Clean all the pending fragments and relative timers if 6lowpan link is going to be deleted. Signed-off-by: NAlexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
Add nescesary mlme callbacks to satisfy "iz list" request from user space. Due to 6lowpan device doesn't have its own phy, mlme implemented as a pipe to a real phy to which 6lowpan is attached. Signed-off-by: NAlexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 16 4月, 2012 1 次提交
-
-
由 Eric Dumazet 提交于
Use of "unsigned int" is preferred to bare "unsigned" in net tree. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 23 2月, 2012 1 次提交
-
-
由 Danny Kukawka 提交于
Use eth_mac_addr() for .ndo_set_mac_address, remove lowpan_set_address since it do currently the same as eth_mac_addr(). Additional advantage: eth_mac_addr() already checks if the given address is valid Signed-off-by: NDanny Kukawka <danny.kukawka@bisect.de> Acked-by: NDmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 11月, 2011 1 次提交
-
-
由 Dan Carpenter 提交于
dev_queue_xmit() consumes its own skb, so the call to dev_kfree_skb() in lowpan_fragment_xmit() is a double free. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Acked-by: NAlexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 14 11月, 2011 5 次提交
-
-
This patch provides possibility to decompress UDP headers. Derived from Contiki OS. Signed-off-by: NAlexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
This patch adds support for UDP header compression. Derived from Contiki OS. Signed-off-by: NAlexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
This patch fixes settings for device initialization which makes possible to use NDISC and TCP. Signed-off-by: NAlexander Smirnov <alex.bluesman.smirnov@gmail.com> Acked-by: NDmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
This patch disables debug output enabled by default. Signed-off-by: NAlexander Smirnov <alex.bluesman.smirnov@gmail.com> Acked-by: NDmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
This patch adds support for frame fragmentation. Signed-off-by: NAlexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 16 9月, 2011 2 次提交
-
-
This patch fixes 2 issues in lowpan_skb_deliver function: 1. Check for return status of skb_copy call; 2. Use skb_copy with proper GFP flag, drop check for non-interrupt context. Signed-off-by: NAlexander Smirnov <alex.bluesman.smirnov@gmail.com> Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dan Carpenter 提交于
We should release the dev_hold() on error before returning here. Signed-off-by: NDan Carpenter <error27@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-