- 15 5月, 2013 25 次提交
-
-
由 Wolfram Sang 提交于
devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NWolfram Sang <wsa@the-dreams.de> Signed-off-by: NFelipe Balbi <balbi@ti.com>
-
由 Wolfram Sang 提交于
devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NWolfram Sang <wsa@the-dreams.de> Signed-off-by: NFelipe Balbi <balbi@ti.com>
-
由 Vivek Gautam 提交于
The commit: 388e5c51 usb: dwc3: remove dwc3 dependency on host AND gadget breaks compilation when USB=y, USB_GADGET=m, USB_DWC3=y and USB_DWC3_DUAL_ROLE=y. drivers/built-in.o: In function `dwc3_gadget_giveback': drivers/usb/dwc3/gadget.c:271: undefined reference to `usb_gadget_unmap_request' drivers/built-in.o: In function `__dwc3_gadget_kick_transfer': drivers/usb/dwc3/gadget.c:1005: undefined reference to `usb_gadget_unmap_request' drivers/built-in.o: In function `__dwc3_gadget_ep_queue': drivers/usb/dwc3/gadget.c:1073: undefined reference to `usb_gadget_map_request' drivers/built-in.o: In function `dwc3_gadget_reset_interrupt': drivers/usb/dwc3/gadget.c:2165: undefined reference to `usb_gadget_set_state' drivers/built-in.o: In function `dwc3_gadget_init': drivers/usb/dwc3/gadget.c:2647: undefined reference to `usb_add_gadget_udc' drivers/built-in.o: In function `dwc3_gadget_exit': drivers/usb/dwc3/gadget.c:2681: undefined reference to `usb_del_gadget_udc' drivers/built-in.o: In function `__dwc3_ep0_do_control_data': drivers/usb/dwc3/ep0.c:929: undefined reference to `usb_gadget_map_request' drivers/usb/dwc3/ep0.c:906: undefined reference to `usb_gadget_map_request' drivers/built-in.o: In function `dwc3_ep0_set_config': drivers/usb/dwc3/ep0.c:575: undefined reference to `usb_gadget_set_state' drivers/built-in.o: In function `dwc3_ep0_set_address': drivers/usb/dwc3/ep0.c:520: undefined reference to `usb_gadget_set_state' drivers/usb/dwc3/ep0.c:522: undefined reference to `usb_gadget_set_state' drivers/built-in.o: In function `dwc3_ep0_set_config': drivers/usb/dwc3/ep0.c:556: undefined reference to `usb_gadget_set_state' Making changes similar to patch: 71a5e61b usb: chipidea: fix and improve dependencies if usb host or gadget support is built as module Let us limit the DWC3 mode to depend on corresponding usb-subsystem and USB_DWC3. Signed-off-by: NVivek Gautam <gautam.vivek@samsung.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: NFelipe Balbi <balbi@ti.com>
-
由 Wei Yongjun 提交于
Fix to return a negative error code in the go through all configs error handling case instead of 0(usb_add_function() will overwrite ret to 0). Also use error code from usb_gstrings_attach() in all strings init error case instead of -EINVAL. Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: NFelipe Balbi <balbi@ti.com>
-
由 Wei Yongjun 提交于
Fix to return -ENOMEM in the kzalloc() error handling case instead of 0(following platform_device_add_data() will overwrite it to 0), as done elsewhere in this function. Acked-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: NFelipe Balbi <balbi@ti.com>
-
由 Wei Yongjun 提交于
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: NFelipe Balbi <balbi@ti.com>
-
由 Wei Yongjun 提交于
Fix to return -ENOMEM in the request alloc error handling case instead of 0, as done elsewhere in this function. Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: NFelipe Balbi <balbi@ti.com>
-
由 Wei Yongjun 提交于
Fix to return -ENOMEM in the request alloc error handling case instead of 0, as done elsewhere in this function. Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: NFelipe Balbi <balbi@ti.com>
-
由 Wei Yongjun 提交于
Fix to return a negative error code in the gpio_to_irq() error handling case instead of 0, as done elsewhere in this function. Reviewed-by: NJingoo Han <jg1.han@samsung.com> Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: NFelipe Balbi <balbi@ti.com>
-
由 Wei Yongjun 提交于
Fix to return -ENOMEM in the devm_kzalloc() error handling case instead of 0, as done elsewhere in this function. Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: NFelipe Balbi <balbi@ti.com>
-
由 Sachin Kamat 提交于
Commit 0998d063 (device-core: Ensure drvdata = NULL when no driver is bound) removes the need to set driver data field to NULL. Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Signed-off-by: NFelipe Balbi <balbi@ti.com>
-
由 Sachin Kamat 提交于
Commit 0998d063 (device-core: Ensure drvdata = NULL when no driver is bound) removes the need to set driver data field to NULL. Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Cc: Marek Vasut <marex@denx.de> Signed-off-by: NFelipe Balbi <balbi@ti.com>
-
由 Sachin Kamat 提交于
Commit 0998d063 (device-core: Ensure drvdata = NULL when no driver is bound) removes the need to set driver data field to NULL. Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Cc: Chao Xie <chao.xie@marvell.com> Signed-off-by: NFelipe Balbi <balbi@ti.com>
-
由 Sachin Kamat 提交于
Commit 0998d063 (device-core: Ensure drvdata = NULL when no driver is bound) removes the need to set driver data field to NULL. Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Cc: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: NFelipe Balbi <balbi@ti.com>
-
由 Sachin Kamat 提交于
Commit 0998d063 (device-core: Ensure drvdata = NULL when no driver is bound) removes the need to set driver data field to NULL. Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Signed-off-by: NFelipe Balbi <balbi@ti.com>
-
由 Sachin Kamat 提交于
Commit 0998d063 (device-core: Ensure drvdata = NULL when no driver is bound) removes the need to set driver data field to NULL. Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Signed-off-by: NFelipe Balbi <balbi@ti.com>
-
由 Sachin Kamat 提交于
Commit 0998d063 (device-core: Ensure drvdata = NULL when no driver is bound) removes the need to set driver data field to NULL. Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Cc: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: NFelipe Balbi <balbi@ti.com>
-
由 Sachin Kamat 提交于
Commit 0998d063 (device-core: Ensure drvdata = NULL when no driver is bound) removes the need to set driver data field to NULL. Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Cc: Darius Augulis <augulis.darius@gmail.com> Signed-off-by: NFelipe Balbi <balbi@ti.com>
-
由 Sachin Kamat 提交于
Commit 0998d063 (device-core: Ensure drvdata = NULL when no driver is bound) removes the need to set driver data field to NULL. Acked-by: NJaswinder Singh <jaswinder.singh@linaro.org> Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Signed-off-by: NFelipe Balbi <balbi@ti.com>
-
由 Sachin Kamat 提交于
Commit 0998d063 (device-core: Ensure drvdata = NULL when no driver is bound) removes the need to set driver data field to NULL. Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: NFelipe Balbi <balbi@ti.com>
-
由 Sachin Kamat 提交于
Commit 0998d063 (device-core: Ensure drvdata = NULL when no driver is bound) removes the need to set driver data field to NULL. Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Cc: Kevin Cernekee <cernekee@gmail.com> Signed-off-by: NFelipe Balbi <balbi@ti.com>
-
由 Sachin Kamat 提交于
Commit 0998d063 (device-core: Ensure drvdata = NULL when no driver is bound) removes the need to set driver data field to NULL. Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Signed-off-by: NFelipe Balbi <balbi@ti.com>
-
由 Robert P. J. Day 提交于
No functional change. Signed-off-by: NRobert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: NFelipe Balbi <balbi@ti.com>
-
由 Wei Yongjun 提交于
Add the missing platform_device_put() before return from omap2430_probe() in the error handling case. Introduced by commit ca784be3 (usb: start using the control module driver) Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: NFelipe Balbi <balbi@ti.com>
-
由 Wei Yongjun 提交于
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Introduced by commit cf9a08ae (usb: gadget: convert source sink and loopback to new function interface) Acked-by: NMichal Nazarewicz <mina86@mina86.com> Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: NFelipe Balbi <balbi@ti.com>
-
- 10 5月, 2013 1 次提交
-
-
由 Libo Chen 提交于
When usb_create_hcd fail, we should call gxio_usb_host_destroy Signed-off-by: NLibo Chen <libo.chen@huawei.com> Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> [extended to EHCI]
-
- 08 5月, 2013 3 次提交
-
-
由 Kent Overstreet 提交于
Cancelling kiocbs requires adding them to a per kioctx linked list, which is one of the few things we need to take the kioctx lock for in the fast path. But most kiocbs can't be cancelled - so if we just do this lazily, we can avoid quite a bit of locking overhead. While we're at it, instead of using a flag bit switch to using ki_cancel itself to indicate that a kiocb has been cancelled/completed. This lets us get rid of ki_flags entirely. [akpm@linux-foundation.org: remove buggy BUG()] Signed-off-by: NKent Overstreet <koverstreet@google.com> Cc: Zach Brown <zab@redhat.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Jens Axboe <axboe@kernel.dk> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Benjamin LaHaise <bcrl@kvack.org> Reviewed-by: N"Theodore Ts'o" <tytso@mit.edu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Kent Overstreet 提交于
Signed-off-by: NKent Overstreet <koverstreet@google.com> Cc: Zach Brown <zab@redhat.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Jens Axboe <axboe@kernel.dk> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Acked-by: NJeff Moyer <jmoyer@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Benjamin LaHaise <bcrl@kvack.org> Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Zach Brown 提交于
This removes the only in-tree user of aio retry. This will let us remove the retry code from the aio core. Removing retry is relatively easy as the USB gadget wasn't using it to retry IOs at all. It always fully submitted the IO in the context of the initial io_submit() call. It only used the AIO retry facility to get the submitter's mm context for copying the result of a read back to user space. This is easy to implement with use_mm() and a work struct, much like kvm does with async_pf_execute() for get_user_pages(). [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: NZach Brown <zab@redhat.com> Signed-off-by: NKent Overstreet <koverstreet@google.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Jens Axboe <axboe@kernel.dk> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Acked-by: NJeff Moyer <jmoyer@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Benjamin LaHaise <bcrl@kvack.org> Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 05 5月, 2013 1 次提交
-
-
由 Al Viro 提交于
Cc: stable@vger.kernel.org Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 01 5月, 2013 1 次提交
-
-
由 Andrew Morton 提交于
Remove unused local `us', which broke the build. Also nuke an unneeded cast. Repairs commit 191648d0 ("usb: storage: Convert US_DEBUGP to usb_stor_dbg"). Cc: Joe Perches <joe@perches.com> Acked-by: NDavid Rientjes <rientjes@google.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 30 4月, 2013 3 次提交
-
-
由 David Howells 提交于
Don't use create_proc_read_entry() as that is deprecated, but rather use proc_create_data() and seq_file instead. Signed-off-by: NDavid Howells <dhowells@redhat.com> cc: Li Yang <leoli@freescale.com> cc: Felipe Balbi <balbi@ti.com> cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> cc: linux-usb@vger.kernel.org cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 David Howells 提交于
Don't use create_proc_read_entry() as that is deprecated, but rather use proc_create_data() and seq_file instead. Signed-off-by: NDavid Howells <dhowells@redhat.com> cc: Felipe Balbi <balbi@ti.com> cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> cc: linux-usb@vger.kernel.org Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 26 4月, 2013 4 次提交
-
-
由 Arnd Bergmann 提交于
The Kconfig entry for USB_EHCI_MSM unconditionally selects USB_MSM_OTG, which is now only visible when USB_PHY is also enabled. This adds an appropriate dependency and enables USB_PHY in the msm defconfig, avoiding the Kbuild warning: warning: (USB_EHCI_MSM) selects USB_MSM_OTG which has unmet direct dependencies (USB_SUPPORT && USB_PHY && (USB || USB_GADGET) && ARCH_MSM) Signed-off-by: NArnd Bergmann <arnd@arndb.de> Cc: Felipe Balbi <balbi@ti.com> Cc: Pavankumar Kondeti <pkondeti@codeaurora.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Arnd Bergmann 提交于
Like the EHCI driver, OHCI supports a large number of different platform glue drivers by directly including them, which causes problems with conflicting macro definitions in some cases. As more ARM architecture specific back-ends are required to coexist in a single build, we should split those out into separate drivers. Unfortunately, the infrastructure for that is still under development, so to give us more time, this uses a separate *_PLATFORM_DRIVER macro for each ARM specific OHCI backend, just like we already do on PowerPC and some of the other ARM platforms. In linux-3.10, only the SPEAr and CNS3xxx back-ends would actually conflict without this patch, but over time we would get more of them, so this is a way to avoid having to patch the driver every time it breaks. We should still split out all back-ends into separate loadable modules, but that work is only needed to improve code size and cleanliness after this patch, not for correctness. While we're here, this fixes the incorrectly sorted error path for the OMAP1 and OMAP3 backends to ensure we always unregister the exact set of drivers that were registered before erroring out. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Arnd Bergmann 提交于
The Kconfig entry for USB_OMAP unconditionally selects USB_ISP1301, which is now only visible when USB_PHY is also enabled. This adds an appropriate dependency and enables USB_PHY in the omap1 defconfig, avoiding these build warnings: warning: (USB_OHCI_HCD && USB_OMAP) selects ISP1301_OMAP which has unmet direct dependencies (USB_SUPPORT && USB_PHY && I2C && ARCH_OMAP_OTG) Also fix a Makefile typo while we're at it. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Arnd Bergmann 提交于
The Kconfig entry for USB_LPC32XX unconditionally selects USB_ISP1301, which is now only visible when USB_PHY is also enabled. This adds an appropriate dependency and enables USB_PHY in the msm defconfig, avoiding these build errors: warning: (USB_LPC32XX) selects USB_ISP1301 which has unmet direct dependencies (USB_SUPPORT && USB_PHY && (USB || USB_GADGET) && I2C) drivers/built-in.o: In function `usb_hcd_nxp_probe': drivers/usb/host/ohci-nxp.c:224: undefined reference to `isp1301_get_client' drivers/built-in.o: In function `lpc32xx_udc_probe': drivers/usb/gadget/lpc32xx_udc.c:3071: undefined reference to `isp1301_get_client' Signed-off-by: NArnd Bergmann <arnd@arndb.de> Cc: Felipe Balbi <balbi@ti.com> Cc: Roland Stigge <stigge@antcom.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 25 4月, 2013 1 次提交
-
-
由 Adrian Thomasset 提交于
The FT4232H used in the ST Micro Connect Lite has four hi-speed UART ports. The first two ports are reserved for the JTAG interface. We enable by default ports 2 and 3 as UARTs (where port 2 is a conventional RS-232 UART) Signed-off-by: NAdrian Thomasset <adrian.thomasset@st.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 24 4月, 2013 1 次提交
-
-
由 Arnd Bergmann 提交于
Both phy-tegra-usb.c and ehci-tegra.c export symbols used by the other one, which does not work if one of them or both are loadable modules, resulting in an error like: drivers/built-in.o: In function `utmi_phy_clk_disable': drivers/usb/phy/phy-tegra-usb.c:302: undefined reference to `tegra_ehci_set_phcd' drivers/built-in.o: In function `utmi_phy_clk_enable': drivers/usb/phy/phy-tegra-usb.c:324: undefined reference to `tegra_ehci_set_phcd' drivers/built-in.o: In function `utmi_phy_power_on': drivers/usb/phy/phy-tegra-usb.c:447: undefined reference to `tegra_ehci_set_pts' This turns the interface into a one-way dependency by letting the tegra ehci driver pass two function pointers for callbacks that need to be called by the phy driver. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Cc: Venu Byravarasu <vbyravarasu@nvidia.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Felipe Balbi <balbi@ti.com> Cc: Stephen Warren <swarren@nvidia.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-