set_modeready flag must be set before command sent to USB in
s2255_write_config.
Signed-off-by: NDean Anderson <dean@sensoray.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

* Return actual error values as returned by the i2c subsystem, rather
  than 0 or 1.
* If the registration of the second bus fails, unregister the first one
  before exiting, otherwise we are leaking resources.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Acked-by: NAndy Walls <awalls@radix.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Currently drivers/media drivers are linked very early - directly after
base, block, misc, and mfd and before ata, scsi, ide, input, firewire,
usb, and i2c. This breaks static build of video4linux drivers, that use
generic CPU i2c adapter drivers and the v4l2-subdev subsystem, because
during video4linux probing the v4l2-subdev core requires a struct
i2c_adapter context, which cannot be satisfied before the i2c subsystem is
initialised. Moving drivers/media after drivers/i2c fixes this problem.

The best way to trigger action is by submitting a patch:-) So, let's see
what comes out of it - on the one hand I don't see any reason why media
has to be linked this early, and nobody was able to give me one yesterday
as this problem has been discussed on linux-media, OTOH, maybe indeed it
would be better to move i2c the whole way up above media, but that'd be
much bigger of a change, I think.
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.htmlSigned-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

I lowered the kfree(t) down a couple lines and removed the superflous
"t->vdev = NULL;"
Signed-off-by: NDan Carpenter <error27@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

I moved the kfree() down a couple lines.  t->vdev is going to be in freed
memory so there is no point setting it to NULL.  I added a kfree(t) on a
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

selecting ALSA module breaks if !SND. Just remove select.

While here, let's fix the whitespacing at the Kconfig.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

A late v4l2_subdev framework change accidentally sent the audio input
routing value to the external multiplexer, instead of the muxer input routing
value to the external multiplexer.  This change corrects that error.
Signed-off-by: NAndy Walls <awalls@radix.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This reverts commit 8032b526.

Hey, it was only meant to be a single release.  Now they can all die as
far as I'm concerned.

[ Just kidding.  They're cute and cuddly.

  Except when they have horrible nasty facial diseases.  Oh, and I guess
  they're not actually that cuddly even when disease-free. ]
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The maple mouse driver currently in mainline is broken:

bash-3.1# modprobe maplemouse
[   56.886378] input: Dreamcast Mouse as /devices/virtual/input/input3
[   56.918379] Unable to handle kernel NULL pointer dereference at virtual address 00000004
[   56.930543] pc = c003304e
[   56.934973] *pde = 00000000
[   56.944948] Oops: 0000 [#1]
[   56.947867] Modules linked in: maplemouse(+)
[   56.952353]
[   56.953921] Pid : 1157, Comm: \0x09\0x09modprobe
[   56.958021] CPU : 0        \0x09\0x09Not tainted  (2.6.30-rc2-00130-g3e98f9f1 #1)
[   56.958052]
[   56.966567] PC is at dc_mouse_open+0xe/0x40 [maplemouse]
[   56.972125] PR is at input_open_device+0x8a/0xc0
[   56.976944] PC  : c003304e SP  : 8c88bdcc SR  : 40008100 TEA : c0033834
[   56.983854] R0  : 000006c4 R1  : 00000000 R2  : 40008101 R3  : 00000000
[   56.990744] R4  : 8c8db800 R5  : c0033080 R6  : 00000005 R7  : 00000200
[   56.997635] R8  : 8c8db800 R9  : 8c8dbe3c R10 : 00000000 R11 : 8c98881c
[   57.004525] R12 : 8c8dbe64 R13 : 8ca50140 R14 : 8c88bdd4
[   57.010063] MACH: 00000497 MACL: 00000348 GBR : 29674440 PR  : 8c1b4d0a
[   57.016939]
...

Here is a fix for this, keeping an open and close, so reducing
the load on the system when the mouse is not in use, and also properly
referencing the maple device buffer following the recent update.
Signed-off-by: NAdrian McMenamin <adrian@mcmen.demon.co.uk>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

The virtio-rng drivers checks for spurious callbacks. Since
callbacks can be implemented via shared interrupts (e.g. PCI) this
could lead to guest kernel oopses with lots of virtio devices.
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: stable@kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The release path for a disconnected device frees the object then unlocks
the mutex in the freed object...

Found by Dan Carpenter using Smatch
Signed-off-by: NAlan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Remove my name and emailaddress from note in the source. Wincor Nixdorf
only has some ITE-chips on their mainboards, other chips are not
available for me for testing.
Signed-off-by: NNiels de Vos <niels.devos@wincor-nixdorf.com>
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Wrong types on IRQ handler
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The umem driver issues two warnings on boot, due to blk_plug_device() and
blk_remove_plug() being called without q->queue_lock held.  Starting with
e48ec690 (block: extend queue_flag bitops), the queue_flag_* functions
warn if q->queue_lock doesn't appear to be locked.  In fact, q->queue_lock
is NULL (though that apparently isn't otherwise a problem as the driver is
using card->lock for everything).

Although blk_init_queue() with take a request_fn_proc and spinlock_t*,
there isn't a corresponding init helper that takes a make_request_fn.
Setting queue_lock to &card->lock explicitly seems to work fine for me.
The warning goes away and the device appears to behave.

[    1.531881] v2.3 : Micro Memory(tm) PCI memory board block driver
[    1.538136] umem 0000:02:01.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    1.545018] umem 0000:02:01.0: Micro Memory(tm) controller found (PCI Mem Module (Battery Backup))
[    1.554176] umem 0000:02:01.0: CSR 0xfc9ffc00 -> 0xffffc200013d0c00 (0x100)
[    1.561279] umem 0000:02:01.0: Size 1048576 KB, Battery 1 Disabled (FAILURE), Battery 2 Disabled (FAILURE)
[    1.571114] umem 0000:02:01.0: Window size 16777216 bytes, IRQ 20
[    1.577304] umem 0000:02:01.0: memory NOT initialized. Consider over-writing whole device.
[    1.585989]  umema:<4>------------[ cut here ]------------
[    1.591775] WARNING: at include/linux/blkdev.h:492 blk_plug_device+0x6d/0x106()
[    1.592025] Hardware name: H8SSL
[    1.592025] Modules linked in:
[    1.592025] Pid: 1, comm: swapper Not tainted 2.6.29 #8
[    1.592025] Call Trace:
[    1.592025]  [<ffffffff8023c994>] warn_slowpath+0xd3/0xf2
[    1.592025]  [<ffffffff8025a5b5>] ? save_trace+0x3f/0x9b
[    1.592025]  [<ffffffff8025a68b>] ? add_lock_to_list+0x7a/0xba
[    1.592025]  [<ffffffff8025e609>] ? validate_chain+0xb3b/0xce8
[    1.592025]  [<ffffffff80441556>] ? mm_make_request+0x27/0x59
[    1.592025]  [<ffffffff80441556>] ? mm_make_request+0x27/0x59
[    1.592025]  [<ffffffff8025ef04>] ? __lock_acquire+0x74e/0x7b9
[    1.592025]  [<ffffffff8025a70e>] ? get_lock_stats+0x34/0x5e
[    1.592025]  [<ffffffff8025a746>] ? put_lock_stats+0xe/0x27
[    1.592025]  [<ffffffff80441556>] ? mm_make_request+0x27/0x59
[    1.592025]  [<ffffffff803ad165>] blk_plug_device+0x6d/0x106
[    1.592025]  [<ffffffff80441575>] mm_make_request+0x46/0x59
[    1.592025]  [<ffffffff803ac2d9>] generic_make_request+0x335/0x3cf
[    1.592025]  [<ffffffff8027fcc7>] ? mempool_alloc_slab+0x11/0x13
[    1.592025]  [<ffffffff8027fdce>] ? mempool_alloc+0x45/0x101
[    1.592025]  [<ffffffff8025a746>] ? put_lock_stats+0xe/0x27
[    1.592025]  [<ffffffff803adda5>] submit_bio+0x10a/0x119
[    1.592025]  [<ffffffff802c8d00>] submit_bh+0xe5/0x109
[    1.592025]  [<ffffffff802cbf43>] block_read_full_page+0x2aa/0x2cb
[    1.592025]  [<ffffffff802cf4c4>] ? blkdev_get_block+0x0/0x4c
[    1.592025]  [<ffffffff805c90a8>] ? _spin_unlock_irq+0x36/0x51
[    1.592025]  [<ffffffff80286836>] ? __lru_cache_add+0x92/0xb2
[    1.592025]  [<ffffffff802cf008>] blkdev_readpage+0x13/0x15
[    1.592025]  [<ffffffff8027de06>] read_cache_page_async+0x90/0x134
[    1.592025]  [<ffffffff802ceff5>] ? blkdev_readpage+0x0/0x15
[    1.592025]  [<ffffffff802f5f1c>] ? adfspart_check_ICS+0x0/0x16c
[    1.592025]  [<ffffffff8027deb8>] read_cache_page+0xe/0x45
[    1.592025]  [<ffffffff802f5170>] read_dev_sector+0x2e/0x93
[    1.592025]  [<ffffffff802f5f44>] adfspart_check_ICS+0x28/0x16c
[    1.592025]  [<ffffffff8025d427>] ? trace_hardirqs_on+0xd/0xf
[    1.592025]  [<ffffffff802f5f1c>] ? adfspart_check_ICS+0x0/0x16c
[    1.592025]  [<ffffffff802f59c5>] rescan_partitions+0x168/0x2fb
[    1.592025]  [<ffffffff802ceae9>] __blkdev_get+0x259/0x336
[    1.592025]  [<ffffffff803ca1e2>] ? kobject_put+0x47/0x4b
[    1.592025]  [<ffffffff802cebd1>] blkdev_get+0xb/0xd
[    1.592025]  [<ffffffff802f5773>] register_disk+0xc4/0x12b
[    1.592025]  [<ffffffff803b2a7b>] add_disk+0xc3/0x12d
[    1.592025]  [<ffffffff808a1d4a>] ? mm_init+0x0/0x1a5
[    1.592025]  [<ffffffff808a1e73>] mm_init+0x129/0x1a5
[    1.592025]  [<ffffffff808a1d4a>] ? mm_init+0x0/0x1a5
[    1.592025]  [<ffffffff80209056>] _stext+0x56/0x130
[    1.592025]  [<ffffffff80274932>] ? register_irq_proc+0xae/0xca
[    1.592025]  [<ffffffff802f0000>] ? proc_pid_lookup+0xb4/0x18b
[    1.592025]  [<ffffffff8087f975>] kernel_init+0x132/0x18b
[    1.592025]  [<ffffffff8020d17a>] child_rip+0xa/0x20
[    1.592025]  [<ffffffff8020cb40>] ? restore_args+0x0/0x30
[    1.592025]  [<ffffffff8087f843>] ? kernel_init+0x0/0x18b
[    1.592025]  [<ffffffff8020d170>] ? child_rip+0x0/0x20
[    1.592025] ---[ end trace 7150b3b86da74e1e ]---
[    1.889858] ------------[ cut here ]------------[ve_plug+0x5f/0x91()
[    1.893848] Hardware name: H8SSL
[    1.893848] Modules linked in:
[    1.893848] Pid: 1, comm: swapper Tainted: G        W  2.6.29 #8
[    1.893848] Call Trace:
[    1.893848]  [<ffffffff8023c994>] warn_slowpath+0xd3/0xf2
[    1.893848]  [<ffffffff805c8411>] ? trace_hardirqs_on_thunk+0x3a/0x3f
[    1.893848]  [<ffffffff8020cb40>] ? restore_args+0x0/0x30
[    1.893848]  [<ffffffff80254245>] ? __atomic_notifier_call_chain+0x0/0xb2
[    1.893848]  [<ffffffff805c90a3>] ? _spin_unlock_irq+0x31/0x51
[    1.893848]  [<ffffffff805c90bf>] ? _spin_unlock_irq+0x4d/0x51
[    1.893848]  [<ffffffff8044157d>] ? mm_make_request+0x4e/0x59
[    1.893848]  [<ffffffff8025a70e>] ? get_lock_stats+0x34/0x5e
[    1.893848]  [<ffffffff8025a75d>] ? put_lock_stats+0x25/0x27
[    1.893848]  [<ffffffff80441504>] ? mm_unplug_device+0x25/0x50
[    1.893848]  [<ffffffff803acf23>] blk_remove_plug+0x5f/0x91
[    1.893848]  [<ffffffff8044150f>] mm_unplug_device+0x30/0x50
[    1.893848]  [<ffffffff803ab74a>] blk_unplug+0x78/0x7d
[    1.893848]  [<ffffffff803ab75c>] blk_backing_dev_unplug+0xd/0xf
[    1.893848]  [<ffffffff802c853c>] block_sync_page+0x4a/0x4c
[    1.893848]  [<ffffffff8027da1c>] sync_page+0x44/0x4d
[    1.893848]  [<ffffffff805c66fd>] __wait_on_bit_lock+0x42/0x8a
[    1.893848]  [<ffffffff8027d9d8>] ? sync_page+0x0/0x4d
[    1.893848]  [<ffffffff8027d9c4>] __lock_page+0x64/0x6b
[    1.893848]  [<ffffffff802508db>] ? wake_bit_function+0x0/0x2a
[    1.893848]  [<ffffffff8027de4a>] read_cache_page_async+0xd4/0x134
[    1.893848]  [<ffffffff802ceff5>] ? blkdev_readpage+0x0/0x15
[    1.893848]  [<ffffffff802f5f1c>] ? adfspart_check_ICS+0x0/0x16c
[    1.893848]  [<ffffffff8027deb8>] read_cache_page+0xe/0x45
[    1.893848]  [<ffffffff802f5170>] read_dev_sector+0x2e/0x93
[    1.893848]  [<ffffffff802f5f44>] adfspart_check_ICS+0x28/0x16c
[    1.893848]  [<ffffffff8025d427>] ? trace_hardirqs_on+0xd/0xf
[    1.893848]  [<ffffffff802f5f1c>] ? adfspart_check_ICS+0x0/0x16c
[    1.893848]  [<ffffffff802f59c5>] rescan_partitions+0x168/0x2fb
[    1.893848]  [<ffffffff802ceae9>] __blkdev_get+0x259/0x336
[    1.893848]  [<ffffffff803ca1e2>] ? kobject_put+0x47/0x4b
[    1.893848]  [<ffffffff802cebd1>] blkdev_get+0xb/0xd
[    1.893848]  [<ffffffff802f5773>] register_disk+0xc4/0x12b
[    1.893848]  [<ffffffff803b2a7b>] add_disk+0xc3/0x12d
[    1.893848]  [<ffffffff808a1d4a>] ? mm_init+0x0/0x1a5
[    1.893848]  [<ffffffff808a1e73>] mm_init+0x129/0x1a5
[    1.893848]  [<ffffffff808a1d4a>] ? mm_init+0x0/0x1a5
[    1.893848]  [<ffffffff80209056>] _stext+0x56/0x130
[    1.893848]  [<ffffffff80274932>] ? register_irq_proc+0xae/0xca
[    1.893848]  [<ffffffff802f0000>] ? proc_pid_lookup+0xb4/0x18b
[    1.893848]  [<ffffffff8087f975>] kernel_init+0x132/0x18b
[    1.893848]  [<ffffffff8020d17a>] child_rip+0xa/0x20
[    1.893848]  [<ffffffff8020cb40>] ? restore_args+0x0/0x30
[    1.893848]  [<ffffffff8087f843>] ? kernel_init+0x0/0x18b
[    1.893848]  [<ffffffff8020d170>] ? child_rip+0x0/0x20
[    1.893848] ---[ end trace 7150b3b86da74e1f ]---
Signed-off-by: NSage Weil <sage@newdream.net>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

The ACPI video driver defers registration to the i915 driver if the
system supports opregion-mediated backlight control. This registration
was only being performed in the KMS case. Ensure it's done even if we
don't have modesetting enabled.

http://bugzilla.kernel.org/show_bug.cgi?id=13048Signed-off-by: NMatthew Garrett <mjg@redhat.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

This reverts commit fdbdc7fc.

That temporary quick-fix is no longer necessary,
as the previous patch, a65131e9,
"I/O port protection: update for windows compatibility"
should handle this issue for all ports, including this one.
Signed-off-by: NLen Brown <len.brown@intel.com>

For windows compatibility,
1) On a port protection violation, simply ignore the request and
   do not return an exception (allow the control method to continue execution.)
2) If only part of the request overlaps a protected port,
   read/write the individual ports that are not protected.

http://bugzilla.kernel.org/show_bug.cgi?id=13036Signed-off-by: NLin Ming <ming.m.lin@intel.com>
Signed-off-by: NBob Moore <robert.moore@intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

This fixes an inconsistent behaviour when loading the driver with the
switch on or off. In the former case you would also need to soft unblock
the switch via the sysfs file entries to really disable rfkill, in the
latter you wouldn't.
Signed-off-by: NMattia Dongili <malattia@linux.it>
Cc: Matthias Welwarsky <matze@welwarsky.de>
Acked-by: NMatthew Garrett <mjg@redhat.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

sony_backlight_update_status returns 0 on success -1 on failure (i.e.: the
return value from acpi_callsetfunc. The return value in the resume path
was broken and thus always displaying a bogus warning about not being able
to restore the brightness level.
Signed-off-by: NMattia Dongili <malattia@linux.it>
Signed-off-by: NLen Brown <len.brown@intel.com>

When resuming from standby (on a laptop) I see the following message in
my kernel.log:
"ACPI: EC: non-query interrupt received, switching to interrupt mode"
This apparently prevented sony-laptop to properly restore the brightness
level on resume.

The cause: In drivers/acpi/ec.c the acpi_ec_suspend function clears the
GPE mode bit, but this is not restored in acpi_ec_resume (the function
below it). The patch below fixes this by properly restoring the GPE_MODE
bit. Tested and confirmed to work.
Signed-off-by: NAlmer S. Tigelaar <almer@gnome.org>
Signed-off-by: NMattia Dongili <malattia@linux.it>
Acked-by: NAlexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: NLen Brown <len.brown@intel.com>

Fixes the "unknown input event 38" messages. ANYBUTTON_RELEASED is now
treated the same way as FN_KEY_RELEASED.
Signed-off-by: NAlmer S. Tigelaar <almer@gnome.org>
Signed-off-by: NMattia Dongili <malattia@linux.it>
Signed-off-by: NLen Brown <len.brown@intel.com>

Fixes additional special key initialization for SNC 127 key events.
Verified / tested on a Sony VAIO SR model.
Signed-off-by: NAlmer S. Tigelaar <almer@gnome.org>
Signed-off-by: NMattia Dongili <malattia@linux.it>
Signed-off-by: NLen Brown <len.brown@intel.com>

Fixes a duplicate mapping in the SNC sony_127_events structure.
Signed-off-by: NAlmer S. Tigelaar <almer@gnome.org>
Signed-off-by: NMattia Dongili <malattia@linux.it>
Signed-off-by: NLen Brown <len.brown@intel.com>

As processor.max_cstate is an init-time-only modparam,
sanity checking it at init-time is sufficient.

http://bugzilla.kernel.org/show_bug.cgi?id=13142Signed-off-by: NLen Brown <len.brown@intel.com>

Linux tells ICH4 users that they can (manually) invoke
"hpet=force" to enable the undocumented ICH-4M HPET.
The HPET becomes available for both clocksource and clockevents.

But as of ff69f2bb
(acpi: fix of pmtimer overflow that make Cx states time incorrect)
the HPET may be used via clocksource for idle accounting, and
hpet=force on an ICH4 box hangs boot.

It turns out that touching the MMIO HPET withing
the ARB_DIS part of C3 will hang the hardware.

The fix is to simply move the timer access outside
the ARB_DIS region.  This is a no-op on modern hardware
because ARB_DIS is no longer used.

http://bugzilla.kernel.org/show_bug.cgi?id=13087Acked-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: NLen Brown <len.brown@intel.com>

Symbols like SOFT_RESET are way too generic to be exported at large.
To avoid this, let's move the mbus bridge register defines into a
separate file and include it where needed.  This affects mach-kirkwood,
mach-loki, mach-mv78xx0 and mach-orion5x simultaneously as they all
share code in plat-orion which relies on those defines.

Some other defines have been moved to narrower scopes, or simply deleted
when they had no user.

This fixes compilation problem with mpt2sas on the above listed
platforms.
Signed-off-by: NNicolas Pitre <nico@marvell.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Check if we really have Scoop config, otherwice we can get a nice Oops
during probe.
Signed-off-by: NDmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This is causes problems on platforms that have alignment requirements
for DMA transfers.
Signed-off-by: NMartin Fuzzey <mfuzzey@gmail.com>
Acked-by: NMauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

In the case where a gadget driver is removed while no
transceiver was found at probe time, a bug in
otg_put_transceiver() will trigger.

Provide symetric calls for otg_get_transceiver() and
otg_put_transceiver(), wherever a transceiver was found or
not.
Signed-off-by: NRobert Jarzmik <robert.jarzmik@free.fr>
Acked-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch to cdc-wdm

- checks for partial extra descriptors
- fixes a leak in the error case of probe
- checks for an exact number of endpoints
- adds a clarifying comment
Signed-off-by: NOliver Neukum <oliver@neukum.org>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This removes tty->low_latency from all USB serial drivers that push
data into the tty layer at hard interrupt context. It's no longer needed
and actually harmful.
Signed-off-by: NOliver Neukum <oliver@neukum.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch fixes a problem in sierra_send_setup() function when
composite devices are used. One should not be sending ACM commands to
interfaces that are OBEX. Doing this causes an apparent failure as the
ACM command has to time out before the interface can start being used.
Signed-off-by: NElina Pasheva <epasheva@sierrawireless.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

We now have a more correct solution for shrinking runtime driver
footprints than just marking probe() as __init ... use it.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Fix build error in the MIPS USB IP core family device controller driver.
The driver calls udelay() without including linux/delay.h
Signed-off-by: NMatthias Kaehlcke <matthias@kaehlcke.net>
Acked-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

When I want to use my webcam, I get:

                                 vvvvvvv
cheese: page allocation failure. order:5, mode:0x8004
Pid: 8100, comm: cheese Not tainted 2.6.30-rc2-wl-dirty #102
Call Trace:
 [<ffffffff802c5d8e>] __alloc_pages_internal+0x3fe/0x520
 [<ffffffff80210a20>] dma_generic_alloc_coherent+0x90/0x120
 [<ffffffffa001c91e>] hcd_buffer_alloc+0xee/0x130 [usbcore]
 [<ffffffffa000d52d>] usb_buffer_alloc+0x2d/0x40 [usbcore]
 [<ffffffffa0160e14>] uvc_alloc_urb_buffers+0x84/0x140 [uvcvideo]
 [<ffffffffa0160ff6>] uvc_init_video+0x126/0x400 [uvcvideo]
 [...]

Oddly, I remembered fixing this and putting in __GFP_NOWARN
because uvcvideo retries a smaller allocation. However, the
allocation function doesn't pass the gfp flags through to
dma_alloc_coherent so we still get the warning!
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as1231) fixes a use-after-free bug in g_file_storage.  A
device's name may not be available after the device is unregistered,
even if the device structure itself is still allocated.  Since
close_backing_file() prints a LUN's name for debugging, it shouldn't
be called after the LUN has been unregistered.

That whole area needed to be cleaned up; the backing files were
getting closed in a couple of different places.  The patch fixes
things so that they get closed in just one place, as part of the
unbind procedure, immediately before the LUN is unregistered.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Without this patch, the driver won't check that the last fully-occupied
uframe for a new split transaction was vacant beforehand.  This can
lead to a situation in which the first 188 bytes of a 192-byte
isochronous transfer are scheduled in the same uframe as an existing
interrupt transfer.  The resulting schedule looks like this:

       uframe 0: 188-byte isoc-OUT SSPLIT, 8-byte int-IN SSPLIT
       uframe 1: 4-byte isoc-OUT SSPLIT

The SSPLITs are intermingled, causing an error in the downstream hub's
TT.

If you are having problems with devices or hub ports resetting, or failed
interrupt transfers, when you start using a USB audio or video (Isochronous)
device, this patch may help.
Signed-off-by: NDan Streetman <ddstreet@ieee.org>
Reported-by: NKung James <kong1191@gmail.com>
Acked-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Cc: Alan Stern <stern@rowland.harvard.edu>

This patch fixes a problem with any mos7840 device where the use of the field "minor" before it is
initialised results in all the devices being overlaid in memory (minor = 0 for all instances)

Contributed by: Phillip Branch
Signed-off-by: NTony Cook <tony-cook@bigpond.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

add USB ids for the mos7840 based ATEN International serial devices.

Contributed by: Phillip Branch
Signed-off-by: NTony Cook <tony-cook@bigpond.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Fix this build error when CONFIG_PM is not set:
drivers/usb/musb/musb_core.c:2232: error: 'musb_resume_early' undeclared here
Signed-off-by: NAlexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>