- 29 1月, 2008 40 次提交
-
-
由 Auke Kok 提交于
We are pleased to announce a new Gigabit Ethernet product and its driver to the linux community. This product is the Intel(R) 82575 Gigabit Ethernet adapter family. Physical adapters will be available to the public soon. These adapters come in 2- and 4-port versions (copper PHY) currently. Other variants will be available later. The 82575 chipset supports significantly different features that warrant a new driver. The descriptor format is (just like the ixgbe driver) different. The device can use multiple MSI-X vectors and multiple queues for both send and receive. This allows us to optimize some of the driver code specifically as well compared to the e1000-supported devices. This version of the igb driver no lnger uses fake netdevices and incorporates napi_struct members for each ring to do the multi- queue polling. multi-queue is enabled by default and the driver supports NAPI mode only. All the namespace collisions should be gone in this version too. The register macro's have been condensed to improve readability. Signed-off-by: NAuke Kok <auke-jan.h.kok@intel.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Michael Chan 提交于
Prefix "bp->phy_flags" names with BNX2_PHY_FLAG_* for consistency. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Prefix "bnx2->flags" names with BNX2_* for consistency. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
In some blade systems using the 5706 serdes, the hardware sometimes does not properly generate link down interrupts. We add a workaround in the driver's timer to force a link-down when some PHY registers report loss of SYNC. The parallel detect logic is cleaned up slightly to better integrate the workaround. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
It is more correct to get the status block from the bnx2_napi struct instead of the bnx2 struct. It happens that they are the same in this case because we are using the first MSIX vector. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
The chip has problem running in this mode and needs to be disabled. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 John W. Linville 提交于
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Andrew Morton 提交于
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Andrew Morton 提交于
drivers/net/wireless/iwlwifi/iwl-3945.c: In function 'iwl3945_add_radiotap': drivers/net/wireless/iwlwifi/iwl-3945.c:269: warning: format '%d' expects type 'int', but argument 3 has type 'long unsigned int' Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Stefano Brivio 提交于
Fix rfkill code which caused a use-after-free bug. Thanks to David Woodhouse for spotting this out. Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: NStefano Brivio <stefano.brivio@polimi.it> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Holger Schurig 提交于
libertas: re-pepper debug statementThe recent fluff of updates didn't put proper lbs_deb_enter/leave calls into the source code. Add them where appropriate. Also contains some whitespace changes. Signed-off-by: NHolger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Holger Schurig 提交于
The CF card only has a very old firmware (5.0.16p0). This firmware doesn't know anything about mesh config. However, current code blindly calls mesh_config when the card is inserted. So check the firmware version before issuing this command. Signed-off-by: NHolger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Holger Schurig 提交于
Always shows the firmware release. Also converts the firmware release into something that is easily comparable. Signed-off-by: NHolger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Holger Schurig 提交于
boot2_version is purely USB specific, so move it to struct if_usb_card. Signed-off-by: NHolger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Holger Schurig 提交于
netif_rx should be called only from interrupt context. if_cs and if_sdio receive packets from other contexts, and thus should call netif_rx_ni. Signed-off-by: NMarc Pignat <marc.pignat@hevs.ch> Acked-by: NHolger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Michael Buesch 提交于
This adds lots of N-PHY related lookup tables. Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Reinette Chatre 提交于
The << and >> operators need space on each side. Cc: Stefano Brivio <stefano.brivio@polimi.it> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Acked-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Reinette Chatre 提交于
The external iwlwifi driver comes with a README file that is referenced by the Kconfig. This README is not present in the driver included in the kernel. Remove references to this documentation. Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Acked-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Zhu Yi 提交于
Signed-off-by: NZhu Yi <yi.zhu@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Tomas Winkler 提交于
This patch renames iwl3945_rate_scale_priv to iwl3945_rs_sta as it better represents the purpose of this variable. Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NZhu Yi <yi.zhu@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tomas Winkler 提交于
1, This patch renames iwl4965_rate_scale_priv to iwl4965_lq_sta. This type represents a station's link quality. 2. The names of the variables of this type were rs_priv, lq_data, lq, crl across the file. All are now unified under the name lq_sta. Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NZhu Yi <yi.zhu@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Tomas Winkler 提交于
This patch adds iwl_free_fw_desc ucode helper function. It also moves ucode helper functions to iwl-helpers.h. Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NZhu Yi <yi.zhu@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Zhu Yi 提交于
After we delay device initialization until interface up, there are more conditions for the hardware rf_kill switch states during suspend and resume. For example, before suspend we can have interface up or down, rf_kill enable or disable; before resume we can have rf_kill enable or disable. So there are totally 2^3 = 8 conditions to handle. This patch addressed this problem and makes sure every condition works correctly. This patch also merges the device suspend and resume handlers with the mac_start and mac_stop code since they are basically doing the same thing. Signed-off-by: NZhu Yi <yi.zhu@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Zhu Yi 提交于
This patch moves the firmware loading (read firmware from disk and load it into the device SRAM) from pci_probe time to the first network interface open time. There are two reasons for doing this: 1. To support kernel buildin iwlwifi drivers. Because kernel initializes network devices subsystem before hard disk and SATA subsystem, it is impossible to get the firmware image from hard disk in the PCI probe handler. Thus delaying the firmware loading into the network interface open time is the way to go. Note, we only read the firmware image from hard disk the first time the interface is open. After this is succeeded, we cache the firmware image into the host memory. This is a performance gain when user open and close the interface multiple times and is necessary for device suspend and resume. 2. For better power saving. When the iwlwifi modules are loaded (or buildin the kernel) but the wireless network interface is not being used, it is a good practice the wireless device consumes as less power as possible. Unloading the firmware from the wireless device and unregister the driver's interrupt handler in the network interface close handler provides users a way to achieve this. User space network configuration tools (i.e NetworkManager) can also contribute here when it detects a wired cable is connected and close the wireless interface automatically. This patch also includes the pci_save/restore_state() fixed by Ian Schram upon the first version. Signed-off-by: NZhu Yi <yi.zhu@intel.com> Signed-off-by: NIan Schram <ischram@telenet.be> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Ben Cahill 提交于
Document scan command. Signed-off-by: NBen Cahill <ben.m.cahill@intel.com> Signed-off-by: NZhu Yi <yi.zhu@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Tomas Winkler 提交于
This patch removes iwl4965_tx_cmd function and splits its content to iwl4965_hw_build_tx_cmd_rate, iwl4965_build_tx_cmd_basic, and iwl4965_tl_get_stats function. The latest one will be deprecated when traffic load will move to rate scale module. Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NZhu Yi <yi.zhu@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Tomas Winkler 提交于
This patch moves iwl4965_get_dma_hi_address function to iwl-headers.h as iwl_get_dma_hi_address. This function will be used in more chipsets than only 4965. Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NZhu Yi <yi.zhu@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Tomas Winkler 提交于
This function removes redundant code in iwl4965_tx_cmd function, leftovers of previous design. Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NZhu Yi <yi.zhu@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Michael Buesch 提交于
This adds code and table data for channel switching on NPHYs. Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Michael Buesch 提交于
This adds some code to init the 2055 radio. This patch adds two files "tables_nphy.h" and "tables_nphy.c" Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Michael Buesch 提交于
Add boardflags-high. Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Michael Buesch 提交于
Add the register definitions for the Broadcom 2055 N-radio. Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Helge Deller 提交于
Convert optional struct size checks to non-optional compile-time checks. Furthermore BUILD_BUG_ON() which will be optimized away by the compiler. Signed-off-by: NHelge Deller <deller@gmx.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Michael Buesch 提交于
This patch adds support for new firmware. Old firmware is still supported until July 2008. To get new firmware, go to ftp://ftp.linksys.com/opensourcecode/wrt150nv11/1.51.3/ and download the tarball. We don't have a smaller tarball, yet. That will be fixed later. You can extract firmware out of the "wl_ap.o" file contained in this tarball using latest fwcutter. You must pass the option --unsupported to fwcutter. Fwcutter-010 with official support for a new firmware image will be released soon. Signed-off-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-