- 18 5月, 2009 27 次提交
-
-
由 Eric Dumazet 提交于
struct net_device trans_start field is a hot spot on SMP and high performance devices, particularly multi queues ones, because every transmitter dirties it. Is main use is tx watchdog and bonding alive checks. But as most devices dont use NETIF_F_LLTX, we have to lock a netdev_queue before calling their ndo_start_xmit(). So it makes sense to move trans_start from net_device to netdev_queue. Its update will occur on a already present (and in exclusive state) cache line, for free. We can do this transition smoothly. An old driver continue to update dev->trans_start, while an updated one updates txq->trans_start. Further patches could also put tx_bytes/tx_packets counters in netdev_queue to avoid dirtying dev->stats (vlan device comes to mind) Signed-off-by: NEric Dumazet <dada1@cosmosbay.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tilman Schmidt 提交于
The B channel data structure member rcvbytes was never set to anything else but zero, so drop it. Impact: cleanup Signed-off-by: NTilman Schmidt <tilman@imap.cc> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tilman Schmidt 提交于
Drop the kernel config option GIGASET_UNDOCREQ, permanently activating the code it controlled, as there have been no reports of problems caused by its activation but many problems caused by it being disabled. Also fix a few bad comments while we're at it. Impact: cleanup Signed-off-by: NTilman Schmidt <tilman@imap.cc> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tilman Schmidt 提交于
In preparation for porting to kernel CAPI subsystem, include the Gigaset driver's Kconfig directly from ISDN's instead of I4L's. Impact: Kconfig reorganisation, no functional change Signed-off-by: NTilman Schmidt <tilman@imap.cc> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tilman Schmidt 提交于
Mention handling of unregisteted DECT wireless datasets in README.gigaset. Signed-off-by: NTilman Schmidt <tilman@imap.cc> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tilman Schmidt 提交于
gigaset_register_to_LL() is expected to print a message and return 0 on failure. Make it do so consistently. Impact: error handling bugfix Signed-off-by: NTilman Schmidt <tilman@imap.cc> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tilman Schmidt 提交于
Don't generate the hex representation of the payload data if it isn't actually used afterwards. Impact: optimization Signed-off-by: NTilman Schmidt <tilman@imap.cc> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tilman Schmidt 提交于
Use pr_warning() / pr_err() instead of dev_warn() / dev_err() in two places where the dev pointer isn't guaranteed to be valid. Impact: error handling bugfix Signed-off-by: NTilman Schmidt <tilman@imap.cc> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tilman Schmidt 提交于
The separation of state tables for base and M10x has long been removed. Clean up remaining traces of it. Impact: cleanup Signed-off-by: NTilman Schmidt <tilman@imap.cc> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
When using bnx2 in a high transmit load, bnx2_tx_int() cost is pretty high. There are two reasons. One is an expensive call to bnx2_get_hw_tx_cons(bnapi) for each freed skb One is cpu stalls when accessing skb_is_gso(skb) / skb_shinfo(skb)->nr_frags because of two cache line misses. (One to get skb->end/head to compute skb_shinfo(skb), one to get is_gso/nr_frags) This patch : 1) avoids calling bnx2_get_hw_tx_cons(bnapi) too many times. 2) makes bnx2_start_xmit() cache is_gso & nr_frags into sw_tx_bd descriptor. This uses a litle bit more ram (256 longs per device on x86), but helps a lot. 3) uses a prefetch(&skb->end) to speedup dev_kfree_skb(), bringing cache line that will be needed in skb_release_data() result is 5 % bandwidth increase in benchmarks, involving UDP or TCP receive & transmits, when a cpu is dedicated to ksoftirqd for bnx2. bnx2_tx_int going from 3.33 % cpu to 0.5 % cpu in oprofile Note : skb_dma_unmap() still very expensive but this is for another patch, not related to bnx2 (2.9 % of cpu, while it does nothing on x86_32) Signed-off-by: NEric Dumazet <dada1@cosmosbay.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 John Dykstra 提交于
When TCP frees up write buffer space, avoid waking up tasks that have done a poll() or select() on the same socket specifying read-side events. This is an extension of a read-side patch by Eric Dumazet. Signed-off-by: NJohn Dykstra <john.dykstra1@gmail.com> Acked-by: NEric Dumazet <dada1@cosmosbay.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Rothwell 提交于
netdev->dev_addr changed from being an array to being a pointer, so we should not take its address for memcpy(). Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NJiri Pirko <jpirko@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yi Zou 提交于
This adds FCoE related statistics to 82599, including number Rx-ed and Tx-ed FCoE packets, number of Rx-ed and Tx-ed FCoE packets in dwords, number of bad Fiber Channel CRCs detected in FCoE packets, and number of FCoE packets dropped on the Rx side. Signed-off-by: NYi Zou <yi.zou@intel.com> Acked-by: NPeter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yi Zou 提交于
This patch implements the FCoE Rx side offload feature in ixgbe_main.c to 82599 using the Rx offload infrastructure code added in the previous patch. The large receive offload by Direct Data Placement (DDP) for FCoE is achieved by implementing the ndo_fcoe_ddp_setup and ndo_fcoe_ddp_done in net_device_ops via netdev. It is up to the ULD, i.e., fcoe and libfc to query and setup large receive offload accordingly through the corresponding netdev upon creating fcoe instances. Signed-off-by: NYi Zou <yi.zou@intel.com> Acked-by: NPeter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yi Zou 提交于
This adds infrastructure code for FCoE Rx side offload feature to 82599, which provides large receive offload for FCoE by Direct Data Placement (DDP). The ixgbe_fcoe_ddp_get() and ixgbe_fcoe_ddp_put() pair corresponds to the netdev support to FCoE by the function pointers provided in net_device_ops as ndo_fcoe_ddp_setup and ndo_fcoe_ddp_done. The implementation of these in ixgbe is shown in the next patch. Signed-off-by: NYi Zou <yi.zou@intel.com> Signed-off-by: NChris Leech <christopher.leech@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yi Zou 提交于
This patch implements the FCoE Tx side offload features in ixgbe_main.c to 82599 using the Tx offload infrastructure code added in the previous patch. This is achieved by the calling the FCoE Sequence Offload (FSO) function ixgbe_fso() on the transmit path of ixgbe. This patch also includes an EEPROM check to make sure the NIC we're loading on is an offload-enabled SKU. Signed-off-by: NYi Zou <yi.zou@intel.com> Signed-off-by: NPeter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yi Zou 提交于
This adds infrastructure code for FCoE Tx side offload feature to 82599, including Fiber Channel CRC calculation, auto insertion of the start of frame (SOF) and end of frame (EOF) of FCoE packets, and large send by FCoE Sequence Offload (FSO). Signed-off-by: NYi Zou <yi.zou@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yi Zou 提交于
This adds the FCoE feature code ixgbe_fcoe.c to 82599. For a start, this patch only adds ixgbe_configure_fcoe() to configure related register for FCoE to 82599. In patches that follow, I will be adding more functions to ixgbe_fcoe.c to add support of FCoE offload features to 82599. Signed-off-by: NYi Zou <yi.zou@intel.com> Acked-by: NPeter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yi Zou 提交于
This adds the FCoE feature header ixgbe_fcoe.h to 82599. This header includes the defines and structures required by the ixgbe driver to support various offload features in 82599 for Fiber Channel over Ethernet (FCoE). These offloads features include Fiber Channel CRC calculation, FCoE SOF/EOF auto insertion, FCoE Sequence Offload (FSO) for large send, and Direct Data Placement (DDP) for large receive. Signed-off-by: NYi Zou <yi.zou@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yi Zou 提交于
This adds FCoE related register defines to 82599. Signed-off-by: NYi Zou <yi.zou@intel.com> Acked-by: NPeter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Emil Medve 提交于
PPC_MULTIPLATFORM was killed in commit 28794d34 but this stale occurrence was hiding the mv643xx_eth driver in some cases (e.g. Pegasos II) Signed-off-by: NEmil Medve <Emilian.Medve@Freescale.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
Missed part of "&" removal. Signed-off-by: NJiri Pirko <jpirko@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andrew Morton 提交于
i386 allmodconfig: drivers/net/82596.c: In function 'init_rx_bufs': drivers/net/82596.c:544: warning: cast to pointer from integer of different size drivers/net/82596.c:545: warning: cast to pointer from integer of different size drivers/net/82596.c:548: warning: cast to pointer from integer of different size drivers/net/82596.c:557: warning: cast to pointer from integer of different size drivers/net/82596.c:565: warning: cast to pointer from integer of different size drivers/net/82596.c:569: warning: cast to pointer from integer of different size drivers/net/82596.c:575: warning: cast to pointer from integer of different size drivers/net/82596.c: In function 'rebuild_rx_bufs': drivers/net/82596.c:606: warning: cast to pointer from integer of different size drivers/net/82596.c:608: warning: cast to pointer from integer of different size drivers/net/82596.c: In function 'init_i596_mem': drivers/net/82596.c:680: warning: cast to pointer from integer of different size drivers/net/82596.c:681: warning: cast to pointer from integer of different size drivers/net/82596.c: In function 'i596_rx': drivers/net/82596.c:818: warning: cast to pointer from integer of different size drivers/net/82596.c: In function 'i596_add_cmd': drivers/net/82596.c:975: warning: cast to pointer from integer of different size drivers/net/82596.c:979: warning: cast to pointer from integer of different size drivers/net/82596.c: In function 'i596_start_xmit': drivers/net/82596.c:1088: warning: cast to pointer from integer of different size drivers/net/82596.c:1099: warning: cast to pointer from integer of different size drivers/net/82596.c: In function 'i596_interrupt': drivers/net/82596.c:1404: warning: cast to pointer from integer of different size (ugh) Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mike Travis 提交于
Change error message when alloc_cpumask_var fails. Repairs "cpumask: convert drivers/net/sfc". Signed-off-by: NMike Travis <travis@sgi.com> Acked-by: NBen Hutchings <bhutchings@solarflare.com> Acked-by: NDavid S. Miller <davem@davemloft.net> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Li Zefan 提交于
We can remove this lock here, since we are in cgroup write handler and thus the cgrp is guaranteed to be valid, and no lock is needed when writing a u32 variable. Signed-off-by: NLi Zefan <lizf@cn.fujitsuc.com> Acked-by: NPaul Menage <menage@google.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
Patch fixes issues with dev->dev_addr changing from array to pointer. Hopefully there are no others. Signed-off-by: NJiri Pirko <jpirko@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rami Rosen 提交于
Signed-off-by: NRami Rosen <ramirose@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 10 5月, 2009 8 次提交
-
-
由 David Woodhouse 提交于
This patch adds three attribute files in /sys/class/net/$dev/ for tun devices; allowing userspace to obtain the information which TUNGETIFF offers, and more, but without having to attach to the device in question (which may not be possible if it's in use). It also fixes a bug which has been present in the TUNGETIFF ioctl since its inception, where it would never set IFF_TUN or IFF_TAP according to the device type. (Look carefully at the code which I remove from tun_get_iff() and how the new tun_flags() helper is subtly different). Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Richard Genoud 提交于
ETH_P_SLOW is already defined in include/linux/if_ether.h. There's no need to define BOND_ETH_P_LACPDU in drivers/net/bonding/bond_3ad.h Signed-off-by: NRichard Genoud <richard.genoud@gmail.com> Signed-off-by: NJiri Pirko <jpirko@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
Add missed checking of dev_addr_init return value in alloc_netdev_mq. Signed-off-by: NJiri Pirko <jpirko@redhat.com> net/core/dev.c | 15 ++++++++++++--- 1 files changed, 12 insertions(+), 3 deletions(-) Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Steven Whitehouse 提交于
Signed-off-by: NSteven Whitehouse <swhiteho@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dhananjay Phadke 提交于
Remove unnecessary length parameter since it's always 4 bytes. Signed-off-by: NDhananjay Phadke <dhananjay@netxen.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dhananjay Phadke 提交于
This board doesn't suppot msi-x well due to msi-x table mapping (hardware) issue. Signed-off-by: NDhananjay Phadke <dhananjay@netxen.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dhananjay Phadke 提交于
o Fix the order of irq and hardware context teardown. Also synchronize the interrupt in dev close() before releasing tx buffers. o Fix possible msi-x vector leak if available vectors are less than requested. o Request multiple msix vectors only if hardware supports multiple rx queues. Signed-off-by: NDhananjay Phadke <dhananjay@netxen.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dhananjay Phadke 提交于
Store msi target status register offset in adapter struct. This avoids contention on msi_tgt_status table from interrupt hadlers of different pci function. Signed-off-by: NDhananjay Phadke <dhananjay@netxen.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 09 5月, 2009 4 次提交
-
-
由 John Dykstra 提交于
Commit ead2ceb0 ("Network Drop Monitor: Adding kfree_skb_clean for non-drops and modifying end-of-line points for skbs") established new conventions for identifying dropped packets. Align skb_kill_datagram() with these conventions so that packets that get dropped just before the copy to userspace are properly tracked. Signed-off-by: NJohn Dykstra <john.dykstra1@gmail.com> Acked-by: NNeil Horman <nhorman@tuxdriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stanislaw Gruszka 提交于
Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com> Acked-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stanislaw Gruszka 提交于
Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com> Acked-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 08 5月, 2009 1 次提交
-
-
由 David S. Miller 提交于
Conflicts: include/net/tcp.h
-