- 04 10月, 2016 2 次提交
-
-
由 Ville Syrjälä 提交于
We have the drm_display_info for storing information about the sink, so let's move dvi_dual and max_tmds_clock in there. v2: Deal with superfluous code shuffling Document dvi_dual and max_tmds_clock too Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Christian König <christian.koenig@amd.com> (v1) Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1475070703-6435-5-git-send-email-ville.syrjala@linux.intel.com
-
由 Ville Syrjälä 提交于
We generally store clocks in kHz, so let's do that for the HDMI max TMDS clock value as well. Less surpising. v2: Deal with superfluous code shuffling Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Christian König <christian.koenig@amd.com> (v1) Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1475070703-6435-4-git-send-email-ville.syrjala@linux.intel.com
-
- 29 9月, 2016 2 次提交
-
-
由 Alex Deucher 提交于
We can't properly detect all hypervisors and we need this to properly tear down the hardware. Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
Used the wrong index to setup the phase shedding mask. Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
- 22 9月, 2016 3 次提交
-
-
由 Alex Deucher 提交于
On PX systems, if the platform supports hotplug events ATIF while the dGPU is powered down, handle the event and alert userspace. Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
Some ATPX laptops implement special circuitry to generate display hotplug events via ACPI when the dGPU is powered off. Check if this is supported. Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
Only needed on CIK+ due to the way pci reset is handled by the GPU. Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
- 20 9月, 2016 1 次提交
-
-
由 Alex Deucher 提交于
This is not necessary as pointed out by Lukas Wunner. This reverts commit 5e0b1617.
-
- 19 9月, 2016 1 次提交
-
-
由 David Herrmann 提交于
Rather than using "struct file*", use "struct drm_file*" as tag VM tag for BOs. This will pave the way for "struct drm_file*" without any "struct file*" back-pointer. Signed-off-by: NDavid Herrmann <dh.herrmann@gmail.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20160901124837.680-3-dh.herrmann@gmail.com
-
- 17 9月, 2016 1 次提交
-
-
由 Baoyou Xie 提交于
We get 2 warnings when building kernel with W=1: drivers/gpu/drm/radeon/radeon_device.c:1961:5: warning: no previous prototype for 'radeon_debugfs_init' [-Wmissing-prototypes] drivers/gpu/drm/radeon/radeon_device.c:1966:6: warning: no previous prototype for 'radeon_debugfs_cleanup' [-Wmissing-prototypes] In fact, these functions are dummy, but can be removed, so this patch removes them. Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NBaoyou Xie <baoyou.xie@linaro.org> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 15 9月, 2016 2 次提交
-
-
由 Masahiro Yamada 提交于
Remove unneeded variables and assignments. Reviewed-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: NSean Paul <seanpaul@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/1473863952-7658-3-git-send-email-yamada.masahiro@socionext.com
-
由 Alex Deucher 提交于
Ported from nouveau. v2: re-enable runtime autosuspend in the error case Acked-by: NEdward O'Callaghan <funfunctor@folklore1984.net> Reviewed-by: NMichel Dänzer <michel.daenzer@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 02 9月, 2016 5 次提交
-
-
由 Alex Deucher 提交于
Normally on shutdown or reboot we don't care about necessarily making sure the hw is in a good state because the system is about to be powered down or reset. However, after a shutdown or reboot in a VM, it's best to tear down the hw properly otherwise there can be problems with the next VM use. Reviewed-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NEdward O'Callaghan <funfunctor@folklore1984.net> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
Close was not handled correctly. Reviewed-by: NMichel Dänzer <michel.daenzer@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
Need to fix the error paths. Reviewed-by: NMichel Dänzer <michel.daenzer@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
Missed this case previously. No need to do anything if the device is already off. runtime pm will handle it. Acked-by: NMichel Dänzer <michel.daenzer@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
The sbios always powers up the dGPU on resume. Acked-by: NMichel Dänzer <michel.daenzer@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 25 8月, 2016 2 次提交
-
-
由 Alex Deucher 提交于
Replace packet2's with packet0 writes to UVD_NO_OP. The value written to UVD_NO_OP does not matter. Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
Writes to this register are the preferred way to do NOPs. Bump the driver version as well. Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 24 8月, 2016 2 次提交
-
-
由 Heinrich Schuchardt 提交于
In an if block for (running == 0) running cannot be non-zero. v2: agd: remove unused variable Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Heinrich Schuchardt 提交于
In an if block for (running == 0) running cannot be non-zero. v2: agd: remove unused variable Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NHeinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 20 8月, 2016 1 次提交
-
-
由 Christian König 提交于
This bug seems to be present for a very long time. Signed-off-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
- 18 8月, 2016 1 次提交
-
-
由 Christian König 提交于
Looks like some RV6xx have problems with that. bug: https://bugs.freedesktop.org/show_bug.cgi?id=97099Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
- 16 8月, 2016 1 次提交
-
-
由 Eric Engestrom 提交于
Signed-off-by: NEric Engestrom <eric.engestrom@imgtec.com> Reviewed-by: NJani Nikula <jani.nikula@intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
- 15 8月, 2016 1 次提交
-
-
由 Eric Engestrom 提交于
Signed-off-by: NEric Engestrom <eric@engestrom.ch> [danvet: Clarify that the returned pointer must be freed with kfree().] Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-
- 12 8月, 2016 3 次提交
-
-
由 Daniel Vetter 提交于
Seems to at least compile fine, only change needed was to use the fb_set_suspend helper. Cc: alexander.deucher@amd.com Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1470847958-28465-5-git-send-email-daniel.vetter@ffwll.ch
-
由 Daniel Vetter 提交于
Everyone who uses the fbdev emulation helpers doesn't need to include fb.h directly. Remove it. Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1470847958-28465-3-git-send-email-daniel.vetter@ffwll.ch
-
由 Daniel Vetter 提交于
Lots of drivers don't properly compile without this when CONFIG_FB=n. It's kinda a hack, but since CONFIG_FB doesn't stub any fucntions when it's disabled I think it makes sense to add it to drm_fb_helper.h. Long term we probably need to rethink all the logic to unload firmware framebuffer drivers, at least if we want to be able to move away from CONFIG_FB and fbcon. v2: Unfortunately just stubbing out remove_conflicting_framebuffers in drm_fb_helper.h upset gcc about static vs. non-static declarations, so a new wrapper it needs to be. Means more churn :( Cc: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Cc: Noralf Trønnes <noralf@tronnes.org> Cc: tomi.valkeinen@ti.com Cc: dh.herrmann@gmail.com Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1470847958-28465-2-git-send-email-daniel.vetter@ffwll.ch
-
- 11 8月, 2016 3 次提交
-
-
由 Michel Dänzer 提交于
With the previous change, it's safe to let page flips take effect anytime during a vertical blank period. This can avoid delaying a flip by a frame in some cases where we get to radeon_flip_work_func -> adev->mode_info.funcs->page_flip during a vertical blank period. Acked-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NMichel Dänzer <michel.daenzer@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Michel Dänzer 提交于
Now we can program a flip during a vertical blank period, if it's the one targeted by the flip (or a later one). This allows simplifying radeon_flip_work_func considerably. Acked-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NMichel Dänzer <michel.daenzer@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Wolfram Sang 提交于
The core will do this for us now. Signed-off-by: NWolfram Sang <wsa-dev@sang-engineering.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 09 8月, 2016 3 次提交
-
-
由 Alex Deucher 提交于
This reverts commit bdfb7604. Now that d3cold is upstream, there is no more need for this workaround.
-
由 Lyude 提交于
When this code was written, we didn't retry DP aux transactions on any error, which required retrying important transactions like this in individual drivers. Since that's no longer the case, retrying here is not necessary. As well, we retry any aux transaction on any error 32 times. 7 * 32 = 224, which means this loop causes us to retry grabbing the dpcd 224 times. This is definitely far more then we actually need to do. Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NLyude <cpaul@redhat.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Lyude 提交于
Since it's normal for DRM to retry our aux transaction helpers multiple times in a row, up to 32 times for each attempted transaction, we're making a lot of noise that is no longer necessary now that DRM will just print the return code we give it. Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NLyude <cpaul@redhat.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 08 8月, 2016 3 次提交
-
-
由 Michel Dänzer 提交于
Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NMichel Dänzer <michel.daenzer@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Michel Dänzer 提交于
Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NMichel Dänzer <michel.daenzer@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Michel Dänzer 提交于
Fixes hangs under memory pressure, e.g. running the piglit test tex3d-maxsize concurrently with other tests. Fixes: 17d33bc9 ("drm/ttm: drop waiting for idle in ttm_bo_evict.") Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NMichel Dänzer <michel.daenzer@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 06 8月, 2016 1 次提交
-
-
由 Michel Dänzer 提交于
Fixes hangs under memory pressure, e.g. running the piglit test tex3d-maxsize concurrently with other tests. Fixes: 17d33bc9 ("drm/ttm: drop waiting for idle in ttm_bo_evict.") Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NMichel Dänzer <michel.daenzer@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 30 7月, 2016 2 次提交
-
-
由 Bhaktipriya Shridhar 提交于
alloc_workqueue replaces deprecated create_singlethread_workqueue(). Each hardware CRTC has a single flip work queue. When a radeon_flip_work_func item is queued, it needs to be executed ASAP because even a slight delay may cause the flip to be delayed by one refresh cycle. Hence, a dedicated workqueue with WQ_HIGHPRI set, has been used here since a delay can cause the outcome to miss the refresh cycle. Since there are only a fixed number of work items, explicit concurrency limit is unnecessary here. Reviewed-by: NChristian König <christian.koenig@amd.com> Acked-by: NTejun Heo <tj@kernel.org> Signed-off-by: NBhaktipriya Shridhar <bhaktipriya96@gmail.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Markus Elfring 提交于
The drm_gem_object_unreference_unlocked() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-