Minimum vertical pixel size alignment for input and output DMA and
the scaler depend on color format, rotation, the IP instance and revision.

Make vertical pixel size of format and crop better fit for each SoC
revision and the IP instance by adding min_vsize_align attribute to
the FIMC variant data structure. It's now common for the DMA engines
and the scaler.
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The "s5p-fimc-md" platform device platform_data is used to pass
attached camera sensor data. Not allowing device probe() to succeed
when it's null prevents using FIMC as a mem-to-mem device only.
Fix this by removing the platform_data check against null and
registering sensors only if platform_data is specified.
Also add logging of the information which /dev/video is assigned
to which device during probe().
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

When requested more than 2 buffers the buffer dequeue order was wrong
due to erroneous updating FIMC registers in every interrupt handler
call. This also fixes regression of resetting the output DMA buffer
pointer at wrong time, when some buffers are already queued in hardware.
The hardware is reset in the start_streaming callback in order to align
the H/W state with the software output buffer pointer (buf_index).

Additionally a simple write to S5P_CISCCTRL register is replaced with
a read/modification/write to make sure the scaler is not being disabled
in fimc_hw_set_scaler().
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

ST_LPM bit must not be initially set, so the first resume helper
call properly quiesce the device's operation.
Also fimc_runtime_suspend() at device remove is unneeded and
leads to unbalanced clock disable so remove it.
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Make sure the subdev pointer is cleared when the subdev object
has been freed.
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

After i2c_unregister_device() has been called the client object can already
be freed and thus using the client pointer may lead to dereferencing freed
memory. Avoid this by saving the adapter pointer for further use before
i2c_unregister_device() call.
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Fix x86 allyesconfig builds.  Builds fail due to a non-static variable
named 'debug' in drivers/staging/media/as102/.
Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net>
Cc: Pierrick Hascoet <pierrick.hascoet@abilis.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Now that we've created a /drivers/staging/media, put it together with
/drivers/media. Also, added there a missing entry for the Media API spec.
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Register to read should be written to register 0xfb and then
perform I2C read to get reg value.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Default IF for 6 MHz bandwidth is 3 MHz. Use that.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

AF9015 firmware does not like if it gets interrupted by I2C adapter
request on some critical phases. During normal operation I2C adapter
is used only 2nd demodulator and tuner on dual tuner devices.

Override demodulator callbacks and use mutex for limit access to
those "critical" paths to keep AF9015 happy.
Signed-off-by: NAntti Palosaari <crope@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Otherwise the fh changing the master control won't get the inactive state
change event for the slave controls.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Setting sev->fh to NULL causes problems for the del op added in the next
patch of this series, since this op needs a way to get to its own data
structures, and typically this will be done by using container_of on an
embedded v4l2_fh struct.

The reason the original code is setting sev->fh to NULL is to signal
to users of the event framework that the unsubscription has happened,
but since their is no shared lock between the event framework and users
of it, this is inherently racy, and it also turns out to be unnecessary
as long as both the event framework and the user of the framework do their
own locking properly and the user guarantees that it holds no references
to the subcribed_event structure after its del operation has been called.

This is best explained by looking at the only code currently checking for
sev->fh being set to NULL on unsubscribe, which is the v4l2-ctrls.c send_event
function. Here is the relevant code from v4l2-ctrls: send_event():

	if (sev->fh && (sev->fh != fh ||
			(sev->flags & V4L2_EVENT_SUB_FL_ALLOW_FEEDBACK)))
		v4l2_event_queue_fh(sev->fh, &ev);

Now lets say that v4l2_event_unsubscribe and v4l2-ctrls: send_event() race
on the same sev, then the following could happens:

1) send_event checks sev->fh, finds it is not NULL
<thread switch>
2) v4l2_event_unsubscribe sets sev->fh NULL
3) v4l2_event_unsubscribe calls v4l2_ctrls del_event function, this blocks
   as the thread calling send_event holds the ctrl_lock
<thread switch>
4) send_event calls v4l2_event_queue_fh(sev->fh, &ev) which not is equivalent
   to calling: v4l2_event_queue_fh(NULL, &ev)
5) oops, NULL pointer deref.

Now again without setting sev->fh to NULL in v4l2_event_unsubscribe and
without the (now senseless since always true) sev->fh != NULL check in

1) send_event is about to call v4l2_event_queue_fh(sev->fh, &ev)
<thread switch>
2) v4l2_event_unsubscribe removes sev->list from the fh->subscribed list
<thread switch>
3) send_event calls v4l2_event_queue_fh(sev->fh, &ev)
4) v4l2_event_queue_fh blocks on the fh_lock spinlock
<thread switch>
5) v4l2_event_unsubscribe unlocks the fh_lock spinlock
6) v4l2_event_unsubscribe calls v4l2_ctrls del_event function, this blocks
   as the thread calling send_event holds the ctrl_lock
<thread switch>
8) v4l2_event_queue_fh takes the fh_lock
7) v4l2_event_queue_fh calls v4l2_event_subscribed, does not find it since
   sev->list has been removed from fh->subscribed already -> does nothing
9) v4l2_event_queue_fh releases the fh_lock
10) the caller of send_event releases the ctrl lock (mutex)
<thread switch>
11) v4l2_ctrls del_event takes the ctrl lock
12) v4l2_ctrls del_event removes sev->node from the ev_subs list
13) v4l2_ctrls del_event releases the ctrl lock
14) v4l2_event_unsubscribe frees the sev, to which no references are being
    held anymore
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The kev pointers inside the pending events queue (the available queue) of the
fh point to data inside the sev, unsubscribing frees the sev, thus making these
pointers point to freed memory!

This patch fixes these dangling pointers in the available queue by removing
all matching pending events on unsubscription.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Add a maintainer for s5p-mfc driver.
Signed-off-by: NJeongtae Park <jtp.park@samsung.com>
Acked-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Acked-by: NKamil Debski <k.debski@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

MFC uses the multi-plane API, but it reported single-plane
when querying capabilities.
Signed-off-by: NKamil Debski <k.debski@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Queued list was not reset on REQBUFS(0) call. This caused to enqueue a
freed buffer to the driver.
Reported-by: NAngela Wan <angela.j.wan@gmail.com>
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

v4l2_planes[plane].length field was not initialized for userptr buffers.
This patch fixes this issue.
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
CC: Pawel Osciak <pawel@osciak.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

__buffer_in_use() might be called for empty/uninitialized buffer in the
following scenario: REQBUF(n, USER_PTR), QUERYBUF(). This patch fixes
kernel ops in such case.
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
CC: Pawel Osciak <pawel@osciak.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

fix build warning:
	variable ‘ret’ set but not used in function ‘mxl111sf_i2c_readagain’
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

mxl111sf_idac_config was incorrectly returning val instead of ret
Signed-off-by: NMichael Krufky <mkrufky@linuxtv.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Currently it is also being checked for non BITMAP type menu controls,
breaking the logitech LED control menu added by uvcdynctrl, as well as
potentially breaking the powerline frequency menu.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

If the said config optio is not set, the compiler will spill out many
warnings about statements with no effect, such as:

Casting the zero to void will cure the warning.
Signed-off-by: NTimo Kokkonen <kaapeli@itanic.dy.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Support for single ITE 9135 device.

Only single devices have been tested.  Dual ITE 9135 devices
should work, but have not been tested.

TODOs
support for ver 2 chip
config for other tuner types.
rework of firmware file.
Signed-off-by: NMalcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Hi,

This is a little patch to support Terratec G1 (based on Terratec Grabby).

It works perfectly on my pc (Ubuntu 11.04 / Kernel 2.6.38).

Best regards,
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

If "i" is 2 then when we call cx25821_video_mux() we'd end up going
past the end of the cx25821_boards[dev->board]->input[].

The INPUT() macro obfuscates what's going on in that function so it's
a bit hard to follow.  And as Mauro points out the hard coded 2 is
not very helpful.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The Kconfig symbol RADIO_TEA5764_XTAL is unused. The code does use a
RADIO_TEA5764_XTAL macro, but does that rather peculiar. But there seems
to be a way to keep both. (The easiest way out would be to rip out both
the Kconfig symbol and the macro.)

Note there's also a module parameter 'use_xtal' to influence all this.
Signed-off-by: NPaul Bolle <pebolle@tiscali.nl>
Acked-by: NRandy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: NVaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The crop rectangle takes the preview engine internal cropping
requirements into account. The smallest allowable margins are 14 columns
and 8 rows when reading from memory, and 18 columns and 8 rows when
processing data on the fly from the CCDC.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The macros that define the minimum/maximum input and output sizes are
defined in seperate files and have no consistent naming. In preparation
for preview engine cropping support, move them all to isppreview.c and
rename them to PREV_{MIN|MAX}_{IN|OUT}_{WIDTH|HEIGHT}*.

Remove unused and/or unneeded local variables that store the maximum
output width.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The horizontal averager isn't used and will get in the way when
implementing cropping support on the input pad. Remove it, it can be
added back later if needed.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Set the media_device::hw_revision field to the ISP revision number.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: NSakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Trivial arithmetics clean up.
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Make sure all modules init functions clean up after themselves in case
of error.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reported-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Mutexes must be destroyed with mutex_destroy(). Add missing calls in the
modules cleanup handlers.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Group all init/cleanup functions together to make the code more
readable.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The media_entity_cleanup() function belong to the module cleanup
handlers, not the entity registration handlers. Move it there.

Create a omap3isp_video_cleanup() function to cleanup the video node
entity, and call it from the module cleanup handlers.

Rename omap3isp_stat_free() to omap3isp_stat_cleanup().
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>