- 27 1月, 2013 1 次提交
-
-
由 Tom Herbert 提交于
Fix a reported compilation error where ia variable of type kuid_t was being set to zero. Eliminate two instances of setting tb->fastuid to zero. tb->fastuid is only used if tb->fastreuseport is set, so there should be no problem if tb->fastuid is not initialized (when tb->fastreuesport is zero). Signed-off-by: NTom Herbert <therbert@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 24 1月, 2013 5 次提交
-
-
由 Tom Herbert 提交于
Motivation for soreuseport would be something like a DNS server. An alternative would be to recv on the same socket from multiple threads. As in the case of TCP, the load across these threads tends to be disproportionate and we also see a lot of contection on the socket lock. Note that SO_REUSEADDR already allows multiple UDP sockets to bind to the same port, however there is no provision to prevent hijacking and nothing to distribute packets across all the sockets sharing the same bound port. This patch does not change the semantics of SO_REUSEADDR, but provides usable functionality of it for unicast. Signed-off-by: NTom Herbert <therbert@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tom Herbert 提交于
Motivation for soreuseport would be something like a web server binding to port 80 running with multiple threads, where each thread might have it's own listener socket. This could be done as an alternative to other models: 1) have one listener thread which dispatches completed connections to workers. 2) accept on a single listener socket from multiple threads. In case #1 the listener thread can easily become the bottleneck with high connection turn-over rate. In case #2, the proportion of connections accepted per thread tends to be uneven under high connection load (assuming simple event loop: while (1) { accept(); process() }, wakeup does not promote fairness among the sockets. We have seen the disproportion to be as high as 3:1 ratio between thread accepting most connections and the one accepting the fewest. With so_reusport the distribution is uniform. Signed-off-by: NTom Herbert <therbert@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tom Herbert 提交于
Allow multiple UDP sockets to bind to the same port. Motivation soreuseport would be something like a DNS server. An alternative would be to recv on the same socket from multiple threads. As in the case of TCP, the load across these threads tends to be disproportionate and we also see a lot of contection on the socketlock. Note that SO_REUSEADDR already allows multiple UDP sockets to bind to the same port, however there is no provision to prevent hijacking and nothing to distribute packets across all the sockets sharing the same bound port. This patch does not change the semantics of SO_REUSEADDR, but provides usable functionality of it for unicast. Signed-off-by: NTom Herbert <therbert@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tom Herbert 提交于
Allow multiple listener sockets to bind to the same port. Motivation for soresuseport would be something like a web server binding to port 80 running with multiple threads, where each thread might have it's own listener socket. This could be done as an alternative to other models: 1) have one listener thread which dispatches completed connections to workers. 2) accept on a single listener socket from multiple threads. In case #1 the listener thread can easily become the bottleneck with high connection turn-over rate. In case #2, the proportion of connections accepted per thread tends to be uneven under high connection load (assuming simple event loop: while (1) { accept(); process() }, wakeup does not promote fairness among the sockets. We have seen the disproportion to be as high as 3:1 ratio between thread accepting most connections and the one accepting the fewest. With so_reusport the distribution is uniform. Signed-off-by: NTom Herbert <therbert@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tom Herbert 提交于
Definitions and macros for implementing soreusport. Signed-off-by: NTom Herbert <therbert@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 23 1月, 2013 20 次提交
-
-
由 Pablo Neira Ayuso 提交于
In (f94161c1 netfilter: nf_conntrack: move initialization out of pernet operations), some ifdefs were missing for sysctl dependent code. Reported-by: Nkbuild test robot <fengguang.wu@intel.com> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Gao feng 提交于
Move the code that register/unregister l4proto to the module_init/exit context. Given that we have to modify some interfaces to accomodate these changes, it is a good time to use shorter function names for this using the nf_ct_* prefix instead of nf_conntrack_*, that is: nf_ct_l4proto_register nf_ct_l4proto_pernet_register nf_ct_l4proto_unregister nf_ct_l4proto_pernet_unregister We same many line breaks with it. Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Gao feng 提交于
Move the code that register/unregister l3proto to the module_init/exit context. Given that we have to modify some interfaces to accomodate these changes, it is a good time to use shorter function names for this using the nf_ct_* prefix instead of nf_conntrack_*, that is: nf_ct_l3proto_register nf_ct_l3proto_pernet_register nf_ct_l3proto_unregister nf_ct_l3proto_pernet_unregister We same many line breaks with it. Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Gao feng 提交于
Move the global initial codes to the module_init/exit context. Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Gao feng 提交于
Move the global initial codes to the module_init/exit context. Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Gao feng 提交于
Move the global initial codes to the module_init/exit context. Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Gao feng 提交于
Move the global initial codes to the module_init/exit context. Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Gao feng 提交于
Move the global initial codes to the module_init/exit context. Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Gao feng 提交于
Move the global initial codes to the module_init/exit context. Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Gao feng 提交于
Move the global initial codes to the module_init/exit context. Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Gao feng 提交于
Move the global initial codes to the module_init/exit context. Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Gao feng 提交于
nf_conntrack initialization and cleanup codes happens in pernet operations function. This task should be done in module_init/exit. We can't use init_net to identify if it's the right time to initialize or cleanup since we cannot make assumption on the order netns are created/destroyed. Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Cong Wang 提交于
Fengguang reported: net/core/netpoll.c: In function 'netpoll_setup': net/core/netpoll.c:1049:6: warning: 'err' may be used uninitialized in this function [-Wmaybe-uninitialized] in !CONFIG_IPV6 case, we may error out without initializing 'err'. Reported-by: NFengguang Wu <fengguang.wu@intel.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: NCong Wang <amwang@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Cong Wang 提交于
It is declared in: include/net/ip6_route.h:187:int ip6_fragment(struct sk_buff *skb, int (*output)(struct sk_buff *)); and net/ip6_route.h is already included. Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: NCong Wang <amwang@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 YOSHIFUJI Hideaki / 吉藤英明 提交于
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 YOSHIFUJI Hideaki / 吉藤英明 提交于
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 YOSHIFUJI Hideaki / 吉藤英明 提交于
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 YOSHIFUJI Hideaki / 吉藤英明 提交于
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 YOSHIFUJI Hideaki / 吉藤英明 提交于
Since we have removed NCE (Neighbour Cache Entry) reference from routing entries, the only refcnt holders of an NCE are its timer (if running) and its owner table, in usual cases. As a result, neigh_periodic_work() purges NCEs over and over again even for gateways. It does not make sense to purge entries, if number of them is very small, so keep them. The minimum number of entries to keep is specified by gc_thresh1. Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nicolas Dichtel 提交于
mfc_mcastgrp and mfc_origin are __be32, thus we need to convert INADDR_ANY. Because INADDR_ANY is 0, this patch just fix sparse warnings. Reported-by: NFengguang Wu <fengguang.wu@intel.com> Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 22 1月, 2013 14 次提交
-
-
由 YOSHIFUJI Hideaki / 吉藤英明 提交于
Commit 2152caea ("ipv6: Do not depend on rt->n in rt6_probe().") introduce a bug to try to update "updated" time in neighbour structure. Update the "updated" time only if neighbour is available. Bug was found by Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Fainelli 提交于
This patch changes dsa_switch_setup() to ensure that at least one valid valid port name is specified and will bail out with an error in case we walked the maximum number of port with a valid port name found. Signed-off-by: NFlorian Fainelli <florian@openwrt.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Fainelli 提交于
The slave MII bus registered by the DSA code is using the parent MII bus as part of its name (ds->master_mii_bus_id), in case the parent MII bus name is already 16 characters long (such as d0072004.mdio-mi) we will get the following WARN_ON in dsa_switch_setup() when calling mdiobus_register(): [ 79.088782] ------------[ cut here ]------------ [ 79.093448] WARNING: at fs/sysfs/dir.c:536 sysfs_add_one+0x80/0xa0() [ 79.099831] sysfs: cannot create duplicate filename '/class/mdio_bus/d0072004.mdio-mi' This is a genuine warning, because the DSA slave MII bus will also be named d0072004.mdio-mi, and since MII_BUS_ID_SIZE is 17 characters long (with null-terminator) the following will truncate the slave MII bus id: snprintf(ds->slave_mii_bus->id, MII_BUS_ID_SIZE, "%s-%d:%.2x", ds->master_mii_bus->id, ds->pd->sw_addr); Fix this by using dsa-<switch index->:<sw_add> which is guaranteed to be unique. Signed-off-by: NFlorian Fainelli <florian@openwrt.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Cong Wang 提交于
__skb_tx_hash() and __skb_get_rxhash() are all for calculating hash value based by some fields in skb, mostly used for selecting queues by device drivers. Meanwhile, net/core/dev.c is bloating. Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stefan Hajnoczi 提交于
When we set mac address, software mac address in system and hardware mac address all need to be updated. Current eth_mac_addr() doesn't allow callers to implement error handling nicely. This patch split eth_mac_addr() to prepare part and real commit part, then we can prepare first, and try to change hardware address, then do the real commit if hardware address is set successfully. Signed-off-by: NStefan Hajnoczi <stefanha@gmail.com> Signed-off-by: NAmos Kong <akong@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nicolas Dichtel 提交于
This patch add the support of proxy multicast, ie being able to build a static multicast tree. It adds the support of (*,*) and (*,G) entries. The user should define an (*,*) entry which is not used for real forwarding. This entry defines the upstream in iif and contains all interfaces from the static tree in its oifs. It will be used to forward packet upstream when they come from an interface belonging to the static tree. Hence, the user should define (*,G) entries to build its static tree. Note that upstream interface must be part of oifs: packets are sent to all oifs interfaces except the input interface. This ensures to always join the whole static tree, even if the packet is not coming from the upstream interface. Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: NDavid L Stevens <dlstevens@us.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 YOSHIFUJI Hideaki / 吉藤英明 提交于
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 YOSHIFUJI Hideaki / 吉藤英明 提交于
Construct NS/NA/RS message directly using C99 compound literals. Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 YOSHIFUJI Hideaki / 吉藤英明 提交于
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 YOSHIFUJI Hideaki / 吉藤英明 提交于
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 YOSHIFUJI Hideaki / 吉藤英明 提交于
Reuse dst if one is attached with skb. Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 YOSHIFUJI Hideaki / 吉藤英明 提交于
skb_transport_header() (thus icmp6_hdr()) is available here, use it. Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 YOSHIFUJI Hideaki / 吉藤英明 提交于
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 YOSHIFUJI Hideaki / 吉藤英明 提交于
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-