- 04 2月, 2010 2 次提交
-
-
由 Krishna Kumar 提交于
a developer had complained of getting lots of warnings: "eth16 selects TX queue 98, but real number of TX queues is 64" http://www.mail-archive.com/e1000-devel@lists.sourceforge.net/msg02200.html As there was no follow up on that bug, I am submitting this patch assuming that the other return points will not return invalid txq's, and also that this fixes the bug (not tested). Signed-off-by: NKrishna Kumar <krkumar2@in.ibm.com> Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Acked-by: NPeter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Anton Blanchard 提交于
Commit e5a43549 (ixgbe: remove skb_dma_map/unmap calls from driver) looks to have introduced a bug in ixgbe_tx_map. If we get an error from a PCI DMA call, we loop backwards through count until it becomes -1 and return that. The caller of ixgbe_tx_map expects 0 on error, so return that instead. Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 1月, 2010 1 次提交
-
-
由 Jiri Pirko 提交于
This patch introduces three macros to work with uc list from net drivers. Signed-off-by: NJiri Pirko <jpirko@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 23 1月, 2010 4 次提交
-
-
由 Sridhar Samudrala 提交于
Found this problem when testing IPv6 from a KVM guest to a remote host via e1000e device on the host. The following patch fixes the check for IPv6 GSO packet in Intel ethernet drivers to use skb_is_gso_v6(). SKB_GSO_DODGY is also set when packets are forwarded from a guest. Signed-off-by: NSridhar Samudrala <sri@us.ibm.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Greg Rose 提交于
Inadequate coordination between the PF driver and the VF driver results in tx hangs in the VF driver when you perform certain actions that will lead to a re-init of the PF. Add feature to notify active VFs when the PF is about to re-initialize so that the VFs can take appropriate action. Signed-off-by: NGreg Rose <gregory.v.rose@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Greg Rose 提交于
The PF Reset Done bit should not be set in the extended control register until the PF has actually completed the bring up process. It is a mis- interpretation of the purpose of this bit to assume it should be set when the physical reset of the device is done. Instead it should be used to indicate to the VFs when the PF is ready to provide them with required services. This is not until after the PF is finished coming up and ready to process mailbox events. Signed-off-by: NGreg Rose <gregory.v.rose@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Greg Rose 提交于
When VFs are allocated (as indicated by adapter->num_vfs is non-zero) then the PF pool is no longer zero. Instead it will be the same as the number of VFs allocated. When setting the VLVF entry for the PF we need to use the correct pool otherwise the PF will get VLAN packets from the wire because the packet will pass VFTA filtering and the PF has the default pool, but it will not get VLAN packets from the VFs because it has not set the correct pool bit in the VLVF entry. Signed-off-by: NGreg Rose <gregory.v.rose@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 21 1月, 2010 1 次提交
-
-
由 Roel Kluin 提交于
The variable count and i are unsigned so the (<|>=)0 tests do not work. Signed-off-by: NRoel Kluin <roel.kluin@gmail.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 14 1月, 2010 2 次提交
-
-
由 Shannon Nelson 提交于
Signed-off-by: NShannon Nelson <shannon.nelson@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
This patch resolves issues seen when running netconsole and rebooting via reboot -f. The issue was due to the fact that we were attempting to perform interrupt actions when the q_vectors and rings had already been freed via the ixgbe_shutdown routines. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Acked-by: NMallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 1月, 2010 2 次提交
-
-
由 Greg Rose 提交于
Adds SR-IOV features supported by the 82599 controller to the main driver module. If the CONFIG_PCI_IOV kernel option is selected then the SR-IOV features are enabled. Use the max_vfs module option to allocate up to 63 virtual functions per physical port. Signed-off-by: NGreg Rose <gregory.v.rose@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Greg Rose 提交于
This patch adds register definitions, bit definitions and structures used by the driver to support SR-IOV features of the 82599 controller. Signed-off-by: NGreg Rose <gregory.v.rose@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 08 1月, 2010 2 次提交
-
-
由 Alexey Dobriyan 提交于
Use DEFINE_PCI_DEVICE_TABLE() so we get place PCI ids table into correct section in every case. Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 PJ Waskiewicz 提交于
tc is still throwing a warning that is could be used uninitialized. This fixes it, and properly formats the device ID checks for the use of this variable. Signed-off-by: NPeter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 24 12月, 2009 1 次提交
-
-
由 Don Skidmore 提交于
This patch adds a pci_save_state() call in ixgbe_resume() after pci_restore_state(). A similar change was made in ixgbe_io_slot_reset() that accommodates pci_restore_state() new behavior. This change makes pci_restore_state() clear the saved_state flag This is necessary due to a resent kernel change to pci_restore_state() so that it now clears the saved_state flag of the device right after the device.s standard configuration registers have been poplulated with the previously saved values. Signed-off-by: NDon Skidmore <donald.c.skidmore@intel.com> Acked-by: NPeter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 16 12月, 2009 2 次提交
-
-
由 Gurucharan Shetty 提交于
When the 82598 is fed 802.1q packets, it chokes with an error of the form: ixgbe: eth0: ixgbe_tx_csum: partial checksum but proto=81! As the logic there was not smart enough to look into the vlan header to pick out the encapsulated protocol. There are times when we'd like to send these packets out without having to configure a vlan on the interface. Here we check for the vlan tag and allow the packet to go out with the correct hardware checksum. This patch is a clone of a previously submitted patch by Arthur Jones <ajones@riverbed.com> for igb (Commit - fa4a7ef3). Signed-off-by: NGurucharan Shetty <gshetty@riverbed.com> Signed-off-by: NArthur Jones <ajones@riverbed.com> Acked-by: NMallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mallikarjuna R Chilakala 提交于
Fix the restart_queue and non_eop_desc counters from being double-counted. They are cumulative in each ring, so we don't want to add them to the cumulative result in the adapter's master counter. Otherwise, the stats will be inaccurate Signed-off-by: NMallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com> Acked-by: NPeter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 09 12月, 2009 2 次提交
-
-
由 Don Skidmore 提交于
Signed-off-by: NDon Skidmore <donald.c.skidmore@intel.com> Acked-by: NPeter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Here is an updated version, because ixgbe_get_ethtool_stats() needs to call dev_get_stats() or "ethtool -S" wont give correct tx_bytes/tx_packets values. Several cpus can update netdev->stats.tx_bytes & netdev->stats.tx_packets in parallel. In this case, TX stats are under estimated and false sharing takes place. After a pktgen session sending exactly 200000000 packets : # ifconfig fiber0 | grep TX TX packets:198501982 errors:0 dropped:0 overruns:0 carrier:0 Multi queue devices should instead use txq->tx_bytes & txq->tx_packets in their xmit() method (appropriate txq lock already held by caller, no cache line miss), or use appropriate locking. After patch, same pktgen session gives : # ifconfig fiber0 | grep TX TX packets:200000000 errors:0 dropped:0 overruns:0 carrier:0 Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 12月, 2009 4 次提交
-
-
由 Jesse Brandeburg 提交于
when disabling interrupts, driver was writing with IO, this is no necessary because on ixgbe parts the hardware can "oneshot" disable and clear the interrupt. So on 82598/82599 use of EIAM should avoid one posted write per interrupt when in MSI-X mode. This should improve performance and seems to in my limited testing, reduce CPU utilization VERY slightly. Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Acked-by: NPeter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jesse Brandeburg 提交于
drop variables that had cache lines modified in simultaneous hot paths. keep some variables modified on hot paths but make their storage per queue. cache align DMA data buffer start addresses. cache align (padding) some structures that end within a cacheline. Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com> Acked-by: NPeter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yi Zou 提交于
This removes the Tx queue selection for FCoE traffic from ixgbe_xmit_frame() and does it in the ndo_select_queue() call, moving all Tx queue selection into a single routine. Signed-off-by: NYi Zou <yi.zou@intel.com> Acked-by: NPeter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yi Zou 提交于
Store the user priority for FCoE and use it directly for outgoing FCoE traffic when DCB is enabled. Signed-off-by: NYi Zou <yi.zou@intel.com> Acked-by: NPeter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 03 12月, 2009 1 次提交
-
-
由 Alexander Duyck 提交于
This patch removes skb_dma_map/unmap calls from the ixgbe driver due to the fact that the calls don't work with HW IOMMU enabled systems. The problem is that multiple mappings will give different results when HW IOMMU is enabled and the skb_dma_map/unmap calls only have one location to store mappings. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Acked-by: NPeter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 24 11月, 2009 3 次提交
-
-
由 Alexander Duyck 提交于
There appears to be a stray setting of the VFE bit when registering vlans. This should not be done as vlan filtering should be enabled any time the interface is not in promiscous mode Signed-off-by: NMallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com> Acked-by: NPeter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mallikarjuna R Chilakala 提交于
While configuring rscctl use rx buffer length from rx ring structure instead of passing rx_buf_len to ixgbe_configure_rscctl Signed-off-by: NMallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mallikarjuna R Chilakala 提交于
Divide 82599 HWRSC counters into aggregated and flushed to count number of packets getting coalesced per TCP connection. Signed-off-by: NMallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com> Acked-by: NPeter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 21 11月, 2009 1 次提交
-
-
由 Jaswinder Singh Rajput 提交于
tc is required by CONFIG_IXGBE_DCB. This also fixes compilation warning: drivers/net/ixgbe/ixgbe_main.c: In function ‘ixgbe_tx_is_paused’: drivers/net/ixgbe/ixgbe_main.c:245: warning: unused variable ‘tc’ Signed-off-by: NJaswinder Singh Rajput <jaswinderrajput@gmail.com> Acked-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 19 11月, 2009 1 次提交
-
-
由 Joe Perches 提交于
Not as fancy as coccinelle. Checkpatch errors ignored. Compile tested allyesconfig x86, not all files compiled. grep -rPl --include=*.[ch] "\brequest_irq\s*\([^,\)]+,\s*\&" drivers/net | while read file ; do \ perl -i -e 'local $/; while (<>) { s@(\brequest_irq\s*\([^,\)]+,\s*)\&@\1@g ; print ; }' $file ;\ done Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 11月, 2009 1 次提交
-
-
由 Breno Leitao 提交于
After commmit 4b77b0a2 EEH breaks after the second error, since it calls pci_restore_state() but it returns 0, since pci->state_saved is false. So, this patch just call pci_save_state() after pci_restore_state(). Signed-off-by: NBreno Leitao <leitao@linux.vnet.ibm.com> Acked-by: NPeter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 14 11月, 2009 2 次提交
-
-
由 PJ Waskiewicz 提交于
This patch pairs similar-numbered Rx and Tx queues onto a single MSI-X vector. For example, Tx queue 0 and Rx queue 0's interrupt with be ethX-RxTx-0. This allows for more efficient cleanup, since fewer interrupts will be firing during device operation. It also helps with a cleaner CPU affinity for IRQ affinity. Signed-off-by: NPeter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nelson, Shannon 提交于
Signed-off-by: NShannon Nelson <shannon.nelson@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 12 11月, 2009 1 次提交
-
-
由 Ali Gholami Rudi 提交于
The values of r_idx and rx_ring are not used after the last time they are set in ixgbe_msix_clean_rx(), so they can be removed. Signed-off-by: NAli Gholami Rudi <ali@rudi.ir> Acked-by: NPeter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 07 11月, 2009 3 次提交
-
-
由 Don Skidmore 提交于
When ioatdma was loaded we we were unable to transmit traffic. We weren't using the correct registers in ixgbe_update_tx_dca for 82599 systems. Likewise in ixgbe_configure_tx() we weren't disabling the arbiter before modifying MTQC. Signed-off-by: NDon Skidmore <donald.c.skidmore@intel.com> Acked-by: NPeter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yi Zou 提交于
When DCB is enabled, the ixgbe_check_tx_hang() should check the corresponding TC's TXOFF in TFCS based on the TC that the tx ring belongs to. Adds a function to map from the tx_ring hw reg_idx to the correspodning TC and read TFCS accordingly. Signed-off-by: NYi Zou <yi.zou@intel.com> Acked-by: NPeter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yi Zou 提交于
The 32k gso_max_size when DCB is enabled is for 82598 only, not for 82599. Signed-off-by: NYi Zou <yi.zou@intel.com> Acked-by: NPeter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 10月, 2009 1 次提交
-
-
由 Yi Zou 提交于
Implements the netdev_ops.ndo_fcoe_get_wwn in 82599 if it finds valid prefix for the World Wide Node Name (WWNN) or World Wide Port Name (WWPN), as well as valid SAN MAC address. Signed-off-by: NYi Zou <yi.zou@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 14 10月, 2009 1 次提交
-
-
由 Eric Dumazet 提交于
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 09 10月, 2009 1 次提交
-
-
由 Don Skidmore 提交于
This patch will add the device ID for the 82599-based Ethernet Express Module X520-P2 SFI card. Signed-off-by: NDon Skidmore <donald.c.skidmore@intel.com> Acked-by: NPeter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 08 10月, 2009 1 次提交
-
-
由 Ajit Khaparde 提交于
Since net_device has an instance of net_device_stats, we can remove the instance of this from the private adapter structure. Signed-off-by: NAjit Khaparde <ajitk@serverengines.com> Acked-by: NPeter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-