This patch makes sctp support ipv6 nonlocal bind by adding
sp->inet.freebind and net->ipv6.sysctl.ip_nonlocal_bind
check in sctp_v6_available as what sctp did to support
ipv4 nonlocal bind (commit cdac4e07).
Reported-by: NShijoe George <spanjikk@redhat.com>
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Acked-by: NMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Conflicts:
	drivers/net/ethernet/intel/i40e/i40e_main.c

Jeff Kirsher says:

====================
40GbE Intel Wired LAN Driver Updates 2016-07-22

This series contains updates to i40e and i40evf.

Heinrich Schuchardt found a possible null pointer being dereferenced in
i40e_debug_aq(), fixed the issue by doing the variable assignment after
we are sure the pointer is not null.

Avinash fixed an issue when link was down, we were not showing the
correct advertised link modes.

Mitch cleans up a useless initializer since the variable is assigned
right away.  Refactors the receive filter handling to properly track
filter adds and deletes so the driver will not lose filters during a
reset and up/down cycles.  Also added a tracking mechanism so that the
driver knows when to enter and leave promiscuous mode.

Catherine removes a device id which is not needed (or used).  Moves
a mutex lock since we need to lock the client list around the
i40e_client_release() call to prevent the release from interrupting
the client instances while they are being added.

Joshua adds Hyper-V specific VF device ids.

Amitoj Kaur Chawla cleans up a redundant memset() call before a memcpy().

Stefan Assmann adds the missing link advertise for some x710 NICs.

Tushar Dave fixes and issue found on SPARC, where a PF reset clears MAC
filters and if a platform-specific MAC address is used, the driver has
to explicitly write default MAC address to MAC filters otherwise all
incoming traffic destined to the default MAC address will be dropped
after reset.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch fixes the __output_custom() routine we currently use with
bpf_skb_copy(). I missed that when len is larger than the size of the
current handle, we can issue multiple invocations of copy_func, and
__output_custom() advances destination but also source buffer by the
written amount of bytes. When we have __output_custom(), this is actually
wrong since in that case the source buffer points to a non-linear object,
in our case an skb, which the copy_func helper is supposed to walk.
Therefore, since this is non-linear we thus need to pass the offset into
the helper, so that copy_func can use it for extracting the data from
the source object.

Therefore, adjust the callback signatures properly and pass offset
into the skb_header_pointer() invoked from bpf_skb_copy() callback. The
__DEFINE_OUTPUT_COPY_BODY() is adjusted to accommodate for two things:
i) to pass in whether we should advance source buffer or not; this is
a compile-time constant condition, ii) to pass in the offset for
__output_custom(), which we do with help of __VA_ARGS__, so everything
can stay inlined as is currently. Both changes allow for adapting the
__output_* fast-path helpers w/o extra overhead.

Fixes: 555c8a86 ("bpf: avoid stack copy and use skb ctx for event output")
Fixes: 7e3f977e ("perf, events: add non-linear data support for raw records")
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

gcc-4.9 and higher warn about the newly added NSCI code:

net/ncsi/ncsi-manage.c: In function 'ncsi_process_next_channel':
net/ncsi/ncsi-manage.c:1003:2: error: 'old_state' may be used uninitialized in this function [-Werror=maybe-uninitialized]

The warning is a false positive and therefore harmless, but it would be good to
avoid it anyway. I have determined that the barrier in the spin_unlock_irqsave()
is what confuses gcc to the point that it cannot track whether the variable
was unused or not.

This rearranges the code in a way that makes it obvious to gcc that old_state
is always initialized at the time of use, functionally this should not
change anything.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NGavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Varun Prakash says:

====================
common library for Chelsio drivers.

 This patch series adds common library module(libcxgb.ko)
 for Chelsio drivers to remove duplicate code.

 This series moves common iSCSI DDP Page Pod manager
 code from cxgb4.ko to libcxgb.ko, earlier this code
 was used by only cxgbit.ko now it is used by
 three Chelsio iSCSI drivers cxgb3i, cxgb4i, cxgbit.

 In future this module will have common connection
 management and hardware specific code that can
 be shared by multiple Chelsio drivers(cxgb4,
 csiostor, iw_cxgb4, cxgb4i, cxgbit).

 Please review.

 Thanks

-v3
- removed unused module init and exit functions.

-v2
- updated CONFIG_CHELSIO_LIB to an invisible option
- changed libcxgb.ko module license from GPL to Dual BSD/GPL
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix following sparse warnings
warning: symbol 'cxgb3i_ofld_init' was not declared. Should it be static?
warning: symbol 'cxgb4i_cplhandlers' was not declared. Should it be static?
warning: symbol 'cxgb4i_ofld_init' was not declared. Should it be static?
Signed-off-by: NVarun Prakash <varun@chelsio.com>
Reviewed-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Export cxgbi_ppm_release() to release
ppod manager and cxgbi_tagmask_set() to
set tag mask, they are used by cxgb3i, cxgb4i
and cxgbit.
Signed-off-by: NVarun Prakash <varun@chelsio.com>
Reviewed-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add iSCSI DDP support in cxgb3i driver
using common iSCSI DDP Page Pod Manager.
Signed-off-by: NVarun Prakash <varun@chelsio.com>
Reviewed-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add iSCSI DDP support in cxgb4i driver
using common iSCSI DDP Page Pod Manager.
Signed-off-by: NVarun Prakash <varun@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Remove old ddp code from cxgb3i,cxgb4i,libcxgbi.

Next two commits adds DDP support using
common iSCSI DDP Page Pod Manager.
Signed-off-by: NVarun Prakash <varun@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add common library module(libcxgb.ko) for
Chelsio drivers to remove duplicate code.

Code for iSCSI DDP Page Pod Manager is moved
from cxgb4.ko to libcxgb.ko. Earlier only cxgbit.ko
was using this code, now cxgb3i and cxgb4i will
also use common Page Pod manager code.

In future this module will have common connection
management and hardware specific code that can be
shared by multiple Chelsio drivers.
Signed-off-by: NVarun Prakash <varun@chelsio.com>
Reviewed-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Change the ageing_time type in br_set_ageing_time() from u32 to what it
is expected to be, i.e. a clock_t.
Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

br_stp_enable_bridge() does take the br->lock spinlock. Fix its wrongly
pasted comment and use the same as br_stp_disable_bridge().
Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Based on original work by Casey Leedom <leedom@chelsio.com>
Signed-off-by: NGanesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When using an IPoIB bond currently only active-backup mode is a valid
use case and this commit strengthens it.

Since commit 2ab82852 ("net/bonding: Enable bonding to enslave
netdevices not supporting set_mac_address()") was introduced till
4.7-rc1, IPoIB didn't support the set_mac_address ndo, and hence the
fail over mac policy always applied to IPoIB bonds.

With the introduction of commit 492a7e67 ("IB/IPoIB: Allow setting
the device address"), that doesn't hold and practically IPoIB bonds are
broken as of that. To fix it, lets go to fail over mac if the device
doesn't support the ndo OR this is IPoIB device.

As a by-product, this commit also prevents a stack corruption which
occurred when trying to copy 20 bytes (IPoIB) device address
to a sockaddr struct that has only 16 bytes of storage.
Signed-off-by: NMark Bloch <markb@mellanox.com>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Acked-by: NAndy Gospodarek <gospo@cumulusnetworks.com>
Signed-off-by: NJay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Jiri Pirko says:

====================
mlxsw: implement port mirroring offload

This patchset introduces tc matchall classifier and its offload
to Spectrum hardware. In combination with mirred action, defined port mirroring
setup is offloaded by mlxsw/spectrum driver.

The commands used for creating mirror ports:

tc qdisc  add dev eth25 handle ffff: ingress
tc filter add dev eth25 parent ffff:            \
        matchall skip_sw                        \
        action mirred egress mirror             \
        dev eth27

tc qdisc add dev eth25 handle 1: root prio
tc filter add dev eth25 parent 1:               \
        matchall skip_sw                        \
        action mirred egress mirror             \
        dev eth27

These patches contain:
 - Resource query implementation
 - Hardware port mirorring support for spectrum.
 - Definition of the matchall traffic classifier.
 - General support for hw-offloading for that classifier.
 - Specific spectrum implementaion for matchall offloading.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch offloads port mirroring directives to hw using the matchall TC
with action mirror. It includes both the implementation of the
ndo_setup_tc function for the spectrum driver and the spectrum hardware
offload configuration code.

The hardware offload code is basically two new functions which are capable
of adding and removing a new mirror ports pair. It is done using the MPAT,
MPAR and SBIB registers:
 - A new Switch-Port Analyzer (SPAN) entry is added using MPAT to the 'to'
   port.
 - The 'to' port is bound to the SPAN entry using MPAR register.
 - In case of egress SPAN, the 'to' port gets a new internal shared
   buffer using SBIB register.

In addition, a new database was added to the mlxsw_sp struct to store all
the SPAN entries and their bound ports list. The number of supported SPAN
entries is determined by resource query.
Signed-off-by: NYotam Gigi <yotamg@mellanox.com>
Reviewed-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The helper function is_tcf_mirred_mirror helps finding whether an action
struct is of type mirred and is configured to be of type mirror.
Signed-off-by: NYotam Gigi <yotamg@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The MPAR register is used to bind ports to a SPAN entry (which was
created using MPAT register) and thus mirror their traffic (ingress /
egress) to a different port.
Signed-off-by: NYotam Gigi <yotamg@mellanox.com>
Reviewed-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The MPAT register is used to query and configure the Switch Port Analyzer
(SPAN) table. This register is used to configure a port as a mirror output
port, while after that a mirrored input port can be bound using MPAR
register.
Signed-off-by: NYotam Gigi <yotamg@mellanox.com>
Reviewed-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The SBIB register configures per port buffer for internal use. This
register is used to configure an egress mirror buffer on the egress port
which does the mirroring.
Signed-off-by: NYotam Gigi <yotamg@mellanox.com>
Reviewed-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Following the work that have been done on offloading classifiers like u32
and flower, now the match-all classifier hw offloading is possible. if
the interface supports tc offloading.

To control the offloading, two tc flags have been introduced: skip_sw and
skip_hw. Typical usage:

tc filter add dev eth25 parent ffff: 	\
	matchall skip_sw		\
	action mirred egress mirror	\
	dev eth27
Signed-off-by: NYotam Gigi <yotamg@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The matchall classifier matches every packet and allows the user to apply
actions on it. This filter is very useful in usecases where every packet
should be matched, for example, packet mirroring (SPAN) can be setup very
easily using that filter.
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NYotam Gigi <yotamg@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add max span resources to resources query.
Signed-off-by: NNogah Frankel <nogahf@mellanox.com>
Reviewed-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add resources query implementation. If exists, query the HW for its
builtin resources instead of having them as consts in the code.
Signed-off-by: NNogah Frankel <nogahf@mellanox.com>
Reviewed-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The firmware in several ZTE devices (at least the MF823/831/910
modems/mifis) use OS fingerprinting to determine which type of device to
export. In addition, these devices export a REST API which can be used to
control the type of device. So far, on Linux, the devices have been seen as
RNDIS or CDC Ether.

When CDC Ether is used, devices of the same type are, as with RNDIS,
exported with the same, bogus random MAC address. In addition, the devices
(at least on all firmware revisions I have found) use the bogus MAC when
sending traffic routed from external networks. And as a final feature, the
devices sometimes export the link state incorrectly. There are also
references online to several other ZTE devices displaying this behavior,
with several different PIDs and MAC addresses.

This patch tries to improve the handling of ZTE devices by doing the
following:

* Create a new driver_info-struct that is used by ZTE devices that do not
have an explicit entry in the product table. This struct is the same as the
default cdc_ether driver info, but a new bind- and an rx_fixup-function
have been added.

* In the new bind function, we check if we have read a random MAC from the
device. If we have, then we generate a new random MAC address. This will
ensure that all devices get a unique MAC.

* The rx_fixup-function replaces the destination MAC address in the skb
with that of the device. I have not seen a revision of these devices that
behaves correctly (i.e., sets the right destination MAC), so I chose not to
do any comparison with for example the known, bogus addresses.

* The MF823/MF832/MF910 sometimes export cdc carrier on twice on connect
(the correct behavior is off then on). Work around this by manually setting
carrier to off if an on-notification is received and the NOCARRIER-bit is
not set.

This change will affect all devices, but it should take care of similar
mistakes made by other manufacturers. I tried to think of/look/test for
problems/regressions that could be introduced by this behavior, but could
not find any. However, my familiarity with this code path is not that
great, so there could be something I have overlooked.

I have tested this patch with multiple revisions of all three devices, and
they behave as expected. In other words, they all got a valid, random MAC,
the correct operational state and I can receive/sent traffic without
problems. I also tested with some other cdc_ether devices I have and did
not find any problems/regressions caused by the two general changes.

v3->v4:
* Forgot to remove unused variables, sorry about that (thanks David
Miller).

v2->v3:
* I had forgot to remove the random MAC generation from usbnet_cdc_bind()
(thanks Oliver).
* Rework logic in the ZTE bind-function a bit.

v1->v2:
* Only generate random MAC for ZTE devices (thanks Oliver Neukum).
* Set random MAC and do RX fixup for all ZTE devices that do not have a
product-entry, as the bogus MAC have been seen on devices with several
different PIDs/MAC addresses. In other words, it seems to be the default
behavior of ZTE CDC Ether devices (thanks Lars Melin).
Signed-off-by: NKristian Evensen <kristian.evensen@gmail.com>
Acked-by: NOliver Neukum <oneukum@suse.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pablo Neira Ayuso says:

====================
Netfilter/IPVS updates for net-next

The following patchset contains Netfilter/IPVS updates for net-next,
they are:

1) Count pre-established connections as active in "least connection"
   schedulers such that pre-established connections to avoid overloading
   backend servers on peak demands, from Michal Kubecek via Simon Horman.

2) Address a race condition when resizing the conntrack table by caching
   the bucket size when fulling iterating over the hashtable in these
   three possible scenarios: 1) dump via /proc/net/nf_conntrack,
   2) unlinking userspace helper and 3) unlinking custom conntrack timeout.
   From Liping Zhang.

3) Revisit early_drop() path to perform lockless traversal on conntrack
   eviction under stress, use del_timer() as synchronization point to
   avoid two CPUs evicting the same entry, from Florian Westphal.

4) Move NAT hlist_head to nf_conn object, this simplifies the existing
   NAT extension and it doesn't increase size since recent patches to
   align nf_conn, from Florian.

5) Use rhashtable for the by-source NAT hashtable, also from Florian.

6) Don't allow --physdev-is-out from OUTPUT chain, just like
   --physdev-out is not either, from Hangbin Liu.

7) Automagically set on nf_conntrack counters if the user tries to
   match ct bytes/packets from nftables, from Liping Zhang.

8) Remove possible_net_t fields in nf_tables set objects since we just
   simply pass the net pointer to the backend set type implementations.

9) Fix possible off-by-one in h323, from Toby DiPasquale.

10) early_drop() may be called from ctnetlink patch, so we must hold
    rcu read size lock from them too, this amends Florian's patch #3
    coming in this batch, from Liping Zhang.

11) Use binary search to validate jump offset in x_tables, this
    addresses the O(n!) validation that was introduced recently
    resolve security issues with unpriviledge namespaces, from Florian.

12) Fix reference leak to connlabel in error path of nft_ct, from Zhang.

13) Three updates for nft_log: Fix log prefix leak in error path. Bail
    out on loglevel larger than debug in nft_log and set on the new
    NF_LOG_F_COPY_LEN flag when snaplen is specified. Again from Zhang.

14) Allow to filter rule dumps in nf_tables based on table and chain
    names.

15) Simplify connlabel to always use 128 bits to store labels and
    get rid of unused function in xt_connlabel, from Florian.

16) Replace set_expect_timeout() by mod_timer() from the h323 conntrack
    helper, by Gao Feng.

17) Put back x_tables module reference in nft_compat on error, from
    Liping Zhang.

18) Add a reference count to the x_tables extensions cache in
    nft_compat, so we can remove them when unused and avoid a crash
    if the extensions are rmmod, again from Zhang.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Just several instances of overlapping changes.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We "cache" the loaded match/target modules and reuse them, but when the
modules are removed, we still point to them. Then we may end up with
invalid memory references when using iptables-compat to add rules later.

Input the following commands will reproduce the kernel crash:
  # iptables-compat -A INPUT -j LOG
  # iptables-compat -D INPUT -j LOG
  # rmmod xt_LOG
  # iptables-compat -A INPUT -j LOG
  BUG: unable to handle kernel paging request at ffffffffa05a9010
  IP: [<ffffffff813f783e>] strcmp+0xe/0x30
  Call Trace:
  [<ffffffffa05acc43>] nft_target_select_ops+0x83/0x1f0 [nft_compat]
  [<ffffffffa058a177>] nf_tables_expr_parse+0x147/0x1f0 [nf_tables]
  [<ffffffffa058e541>] nf_tables_newrule+0x301/0x810 [nf_tables]
  [<ffffffff8141ca00>] ? nla_parse+0x20/0x100
  [<ffffffffa057fa8f>] nfnetlink_rcv+0x33f/0x53d [nfnetlink]
  [<ffffffffa057f94b>] ? nfnetlink_rcv+0x1fb/0x53d [nfnetlink]
  [<ffffffff817116b8>] netlink_unicast+0x178/0x220
  [<ffffffff81711a5b>] netlink_sendmsg+0x2fb/0x3a0
  [<ffffffff816b7fc8>] sock_sendmsg+0x38/0x50
  [<ffffffff816b8a7e>] ___sys_sendmsg+0x28e/0x2a0
  [<ffffffff816bcb7e>] ? release_sock+0x1e/0xb0
  [<ffffffff81804ac5>] ? _raw_spin_unlock_bh+0x35/0x40
  [<ffffffff816bcbe2>] ? release_sock+0x82/0xb0
  [<ffffffff816b93d4>] __sys_sendmsg+0x54/0x90
  [<ffffffff816b9422>] SyS_sendmsg+0x12/0x20
  [<ffffffff81805172>] entry_SYSCALL_64_fastpath+0x1a/0xa9

So when nobody use the related match/target module, there's no need to
"cache" it. And nft_[match|target]_release are useless anymore, remove
them.
Signed-off-by: NLiping Zhang <liping.zhang@spreadtrum.com>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

If the user specify the invalid NFTA_MATCH_INFO/NFTA_TARGET_INFO attr
or memory alloc fail, we should call module_put to the related match
or target. Otherwise, we cannot remove the module even nobody use it.
Signed-off-by: NLiping Zhang <liping.zhang@spreadtrum.com>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Simplify the code without any side effect. The set_expect_timeout is
used to modify the timer expired time.  It tries to delete timer, and
add it again.  So we could use mod_timer directly.
Signed-off-by: NGao Feng <fgao@ikuai8.com>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Pull networking fixes from David Miller:

 1) Fix memory leak in nftables, from Liping Zhang.

 2) Need to check result of vlan_insert_tag() in batman-adv otherwise we
    risk NULL skb derefs, from Sven Eckelmann.

 3) Check for dev_alloc_skb() failures in cfg80211, from Gregory
    Greenman.

 4) Handle properly when we have ppp_unregister_channel() happening in
    parallel with ppp_connect_channel(), from WANG Cong.

 5) Fix DCCP deadlock, from Eric Dumazet.

 6) Bail out properly in UDP if sk_filter() truncates the packet to be
    smaller than even the space that the protocol headers need.  From
    Michal Kubecek.

 7) Similarly for rose, dccp, and sctp, from Willem de Bruijn.

 8) Make TCP challenge ACKs less predictable, from Eric Dumazet.

 9) Fix infinite loop in bgmac_dma_tx_add() from Florian Fainelli.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (65 commits)
  packet: propagate sock_cmsg_send() error
  net/mlx5e: Fix del vxlan port command buffer memset
  packet: fix second argument of sock_tx_timestamp()
  net: switchdev: change ageing_time type to clock_t
  Update maintainer for EHEA driver.
  net/mlx4_en: Add resilience in low memory systems
  net/mlx4_en: Move filters cleanup to a proper location
  sctp: load transport header after sk_filter
  net/sched/sch_htb: clamp xstats tokens to fit into 32-bit int
  net: cavium: liquidio: Avoid dma_unmap_single on uninitialized ndata
  net: nb8800: Fix SKB leak in nb8800_receive()
  et131x: Fix logical vs bitwise check in et131x_tx_timeout()
  vlan: use a valid default mtu value for vlan over macsec
  net: bgmac: Fix infinite loop in bgmac_dma_tx_add()
  mlxsw: spectrum: Prevent invalid ingress buffer mapping
  mlxsw: spectrum: Prevent overwrite of DCB capability fields
  mlxsw: spectrum: Don't emit errors when PFC is disabled
  mlxsw: spectrum: Indicate support for autonegotiation
  mlxsw: spectrum: Force link training according to admin state
  r8152: add MODULE_VERSION
  ...

Pull overlayfs fixes from Miklos Szeredi:
 "This contains a fix for a potential crash/corruption issue and another
  where the suid/sgid bits weren't cleared on write"

* 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
  ovl: verify upper dentry in ovl_remove_and_whiteout()
  ovl: Copy up underlying inode's ->i_mode to overlay inode
  ovl: handle ATTR_KILL*

Merge misc fixes from Andrew Morton:
 "Five fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  pps: do not crash when failed to register
  tools/vm/slabinfo: fix an unintentional printf
  testing/radix-tree: fix a macro expansion bug
  radix-tree: fix radix_tree_iter_retry() for tagged iterators.
  mm: memcontrol: fix cgroup creation failure after many small jobs

Pull intel kabylake drm fixes from Dave Airlie:
 "As mentioned Intel has gathered all the Kabylake fixes from -next,
  which we've enabled in 4.7 for the first time, these are pretty much
  limited in scope to only affects kabylake, which is hw that isn't
  shipping yet.  So I'm mostly okay with it going in now.

  If we don't land this, it might be a good idea to disable kabylake
  support in 4.7 before we ship"

* tag 'drm-fixes-for-v4.7-rc8-intel-kbl' of git://people.freedesktop.org/~airlied/linux: (28 commits)
  drm/i915/kbl: Introduce the first official DMC for Kabylake.
  drm/i915: Introduce Kabypoint PCH for Kabylake H/DT.
  drm/i915/gen9: implement WaConextSwitchWithConcurrentTLBInvalidate
  drm/i915/gen9: Add WaFbcHighMemBwCorruptionAvoidance
  drm/i195/fbc: Add WaFbcNukeOnHostModify
  drm/i915/gen9: Add WaFbcWakeMemOn
  drm/i915/gen9: Add WaFbcTurnOffFbcWatermark
  drm/i915/kbl: Add WaClearSlmSpaceAtContextSwitch
  drm/i915/gen9: Add WaEnableChickenDCPR
  drm/i915/kbl: Add WaDisableSbeCacheDispatchPortSharing
  drm/i915/kbl: Add WaDisableGafsUnitClkGating
  drm/i915/kbl: Add WaForGAMHang
  drm/i915: Add WaInsertDummyPushConstP for bxt and kbl
  drm/i915/kbl: Add WaDisableDynamicCreditSharing
  drm/i915/kbl: Add WaDisableGamClockGating
  drm/i915/gen9: Enable must set chicken bits in config0 reg
  drm/i915/kbl: Add WaDisableLSQCROPERFforOCL
  drm/i915/kbl: Add WaDisableSDEUnitClockGating
  drm/i915/kbl: Add WaDisableFenceDestinationToSLM for A0
  drm/i915/kbl: Add WaEnableGapsTsvCreditFix
  ...

Pull drm fixes from Dave Airlie:
 "Two i915 regression fixes.

  Intel have submitted some Kabylake fixes I'll send separately, since
  this is the first kernel with kabylake support and they don't go much
  outside that area I think they should be fine"

* tag 'drm-fixes-for-v4.7-rc8-intel' of git://people.freedesktop.org/~airlied/linux:
  drm/i915: add missing condition for committing planes on crtc
  drm/i915: Treat eDP as always connected, again

Pull m68k upddates from Geert Uytterhoeven:
 - assorted spelling fixes
 - defconfig updates

* tag 'm68k-for-v4.8-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k/defconfig: Update defconfigs for v4.7-rc2
  m68k: Assorted spelling fixes

Pull ARM SoC fixes from Olof Johansson:
 "A handful of fixes before final release:

  Marvell Armada:
   - One to fix a typo in the devicetree specifying memory ranges for
     the crypto engine
   - Two to deal with marking PCI and device-memory as strongly ordered
     to avoid hardware deadlocks, in particular when enabling above
     crypto driver.
   - Compile fix for PM

  Allwinner:
   - DT clock fixes to deal with u-boot-enabled framebuffer (simplefb).
   - Make R8 (C.H.I.P. SoC) inherit system compatibility from A13 to
     make clocks register proper.

  Tegra:
   - Fix SD card voltage setting on the Tegra3 Beaver dev board

  Misc:
   - Two maintainers updates for STM32 and STi platforms"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: tegra: beaver: Allow SD card voltage to be changed
  MAINTAINERS: update STi maintainer list
  MAINTAINERS: update STM32 maintainers list
  ARM: mvebu: compile pm code conditionally
  ARM: dts: sun7i: Fix pll3x2 and pll7x2 not having a parent clock
  ARM: dts: sunxi: Add pll3 to simplefb nodes clocks lists
  ARM: dts: armada-38x: fix MBUS_ID for crypto SRAM on Armada 385 Linksys
  ARM: mvebu: map PCI I/O regions strongly ordered
  ARM: mvebu: fix HW I/O coherency related deadlocks
  ARM: sunxi/dt: make the CHIP inherit from allwinner,sun5i-a13

Pull crypto fixes from Herbert Xu:
 "This fixes a sporadic build failure in the qat driver as well as a
  memory corruption bug in rsa-pkcs1pad"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: rsa-pkcs1pad - fix rsa-pkcs1pad request struct
  crypto: qat - make qat_asym_algs.o depend on asn1 headers

Pull key handling fixes from James Morris:
 "Quoting David Howells:

  Here are three miscellaneous fixes:

  (1) Fix a panic in some debugging code in PKCS#7.  This can only
      happen by explicitly inserting a #define DEBUG into the code.

  (2) Fix the calculation of the digest length in the PE file parser.
      This causes a failure where there should be a success.

  (3) Fix the case where an X.509 cert can be added as an asymmetric key
      to a trusted keyring with no trust restriction if no AKID is
      supplied.

  Bugs (1) and (2) aren't particularly problematic, but (3) allows a
  security check to be bypassed.  Happily, this is a recent regression
  and never made it into a released kernel"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  KEYS: Fix for erroneous trust of incorrectly signed X.509 certs
  pefile: Fix the failure of calculation for digest
  PKCS#7: Fix panic when referring to the empty AKID when DEBUG defined