This patch avoids unnecessary dirty GPA logging to PML buffer in EPT violation
path by setting D-bit manually prior to the occurrence of the write from guest.

We only set D-bit manually in set_spte, and leave fast_page_fault path
unchanged, as fast_page_fault is very unlikely to happen in case of PML.

For the hva <-> pa change case, the spte is updated to either read-only (host
pte is read-only) or be dropped (host pte is writeable), and both cases will be
handled by above changes, therefore no change is necessary.
Signed-off-by: NKai Huang <kai.huang@linux.intel.com>
Reviewed-by: NXiao Guangrong <guangrong.xiao@linux.intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This patch adds new mmu layer functions to clear/set D-bit for memory slot, and
to write protect superpages for memory slot.

In case of PML, CPU logs the dirty GPA automatically to PML buffer when CPU
updates D-bit from 0 to 1, therefore we don't have to write protect 4K pages,
instead, we only need to clear D-bit in order to log that GPA.

For superpages, we still write protect it and let page fault code to handle
dirty page logging, as we still need to split superpage to 4K pages in PML.

As PML is always enabled during guest's lifetime, to eliminate unnecessary PML
GPA logging, we set D-bit manually for the slot with dirty logging disabled.
Signed-off-by: NKai Huang <kai.huang@linux.intel.com>
Reviewed-by: NXiao Guangrong <guangrong.xiao@linux.intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

We don't have to write protect guest memory for dirty logging if architecture
supports hardware dirty logging, such as PML on VMX, so rename it to be more
generic.
Signed-off-by: NKai Huang <kai.huang@linux.intel.com>
Reviewed-by: NXiao Guangrong <guangrong.xiao@linux.intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Indeed, any invalid memslots should be new->npages = 0,
new->base_gfn = 0 and new->flags = 0 at the same time.
Signed-off-by: NTiejun Chen <tiejun.chen@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

When assigning devices to large memory guests (>=128GB guest
memory in the failure case) the functions to create the
IOMMU page-tables for the whole guest might run for a very
long time. On non-preemptible kernels this might cause
Soft-Lockup warnings. Fix these by adding a cond_resched()
to the mapping and unmapping loops.
Signed-off-by: NJoerg Roedel <jroedel@suse.de>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

On long-mode, when far call that changes cs.l takes place, the stack size is
determined by the new mode.  For instance, if we go from 32-bit mode to 64-bit
mode, the stack-size if 64.  KVM uses the old stack size.

Fix it.
Signed-off-by: NNadav Amit <namit@cs.technion.ac.il>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

If we got a wraparound of 32-bit operand, and the limit is 0xffffffff, read and
writes should be successful. It just needs to be done in two segments.
Signed-off-by: NNadav Amit <namit@cs.technion.ac.il>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Unnecassary define was left after commit 7d882ffa ("KVM: x86: Revert
NoBigReal patch in the emulator").

Commit 39f062ff ("KVM: x86: Generate #UD when memory operand is required")
was missing undef.

Fix it.
Signed-off-by: NNadav Amit <namit@cs.technion.ac.il>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

ARPL and MOVSXD are encoded the same and their execution depends on the
execution mode.  The operand sizes of each instruction are different.
Currently, ARPL is detected too late, after the decoding was already done, and
therefore may result in spurious exception (instead of failed emulation).

Introduce a group to the emulator to handle instructions according to execution
mode (32/64 bits). Note: in order not to make changes that may affect
performance, the new ModeDual can only be applied to instructions with ModRM.
Signed-off-by: NNadav Amit <namit@cs.technion.ac.il>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The IRET instruction should clear NMI masking, but the current implementation
does not do so.
Signed-off-by: NNadav Amit <namit@cs.technion.ac.il>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Indeed, Intel SDM specifically states that for the RET instruction "In 64-bit
mode, the default operation size of this instruction is the stack-address size,
i.e. 64 bits."

However, experiments show this is not the case. Here is for example objdump of
small 64-bit asm:

  4004f1:	ca 14 00             	lret   $0x14
  4004f4:	48 cb                	lretq
  4004f6:	48 ca 14 00          	lretq  $0x14

Therefore, remove the Stack flag from far-ret instructions.
Signed-off-by: NNadav Amit <namit@cs.technion.ac.il>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Intel SDM says for CMPXCHG: "To simplify the interface to the processor’s bus,
the destination operand receives a write cycle without regard to the result of
the comparison.". This means the destination page should be dirtied.

Fix it to by writing back the original value if cmpxchg failed.
Signed-off-by: NNadav Amit <namit@cs.technion.ac.il>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Merge tag 'kvm-s390-next-20150122' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into kvm-next

KVM: s390: fixes and features for kvm/next (3.20)

1. Generic
- sparse warning (make function static)
- optimize locking
- bugfixes for interrupt injection
- fix MVPG addressing modes

2. hrtimer/wakeup fun
A recent change can cause KVM hangs if adjtime is used in the host.
The hrtimer might wake up too early or too late. Too early is fatal
as vcpu_block will see that the wakeup condition is not met and
sleep again. This CPU might never wake up again.
This series addresses this problem. adjclock slowing down the host
clock will result in too late wakeups. This will require more work.
In addition to that we also change the hrtimer from REALTIME to
MONOTONIC to avoid similar problems with timedatectl set-time.

3. sigp rework
We will move all "slow" sigps to QEMU (protected with a capability that
can be enabled) to avoid several races between concurrent SIGP orders.

4. Optimize the shadow page table
Provide an interface to announce the maximum guest size. The kernel
will use that to make the pagetable 2,3,4 (or theoretically) 5 levels.

5. Provide an interface to set the guest TOD
We now use two vm attributes instead of two oneregs, as oneregs are
vcpu ioctl and we don't want to call them from other threads.

6. Protected key functions
The real HMC allows to enable/disable protected key CPACF functions.
Lets provide an implementation + an interface for QEMU to activate
this the protected key instructions.

Merge tag 'kvm-arm-for-3.20' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm-next

KVM/ARM changes for v3.20 including GICv3 emulation, dirty page logging, added
trace symbols, and adding an explicit VGIC init device control IOCTL.

Conflicts:
	arch/arm64/include/asm/kvm_arm.h
	arch/arm64/kvm/handle_exit.c

Setting inti->type again is unnecessary here, so let's
remove this.
Acked-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NJens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

When we convert interrupt data from struct kvm_s390_interrupt to
struct kvm_s390_irq we need to check the data in the input parameter
not the output parameter.
Acked-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NJens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

We have to delete the allocated interrupt info if __inject_vm() fails.

Otherwise user space can keep flooding kvm with floating interrupts and
provoke more and more memory leaks.
Reported-by: NDominik Dingel <dingel@linux.vnet.ibm.com>
Reviewed-by: NDominik Dingel <dingel@linux.vnet.ibm.com>
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org # v3.15+
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

Created new KVM device attributes for indicating whether the AES and
DES/TDES protected key functions are available for programs running
on the KVM guest.  The attributes are used to set up the controls in
the guest SIE block that specify whether programs running on the
guest will be given access to the protected key functions available
on the s390 hardware.
Signed-off-by: NTony Krowiak <akrowiak@linux.vnet.ibm.com>
Reviewed-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: NMichael Mueller <mimu@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
[split MSA4/protected key into two patches]

Provide controls for setting/getting the guest TOD clock based on the VM
attribute interface.

Provide TOD and TOD_HIGH vm attributes on s390 for managing guest Time Of
Day clock value.

TOD_HIGH is presently always set to 0. In the future it will contain a high
order expansion of the tod clock value after it overflows the 64-bits of
the TOD.
Signed-off-by: NJason J. Herne <jjherne@linux.vnet.ibm.com>
Reviewed-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

When injecting SIGP set prefix or a machine check, we trace
the values in our per-vcpu local_int data structure instead
of the parameters passed to the function.

Fix this by changing the trace statement to use the correct values.
Reviewed-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NJens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

Currently we are always setting the wrong bit in the
bitmap for pending emergency signals. Instead of using
emerg.code from the passed in irq parameter, we use the
value in our per-vcpu local_int structure, which is always zero.
That means all emergency signals will have address 0 as parameter.
If two CPUs send a SIGP to the same target, one might be lost.

Let's fix this by using the value from the parameter and
also trace the correct value.
Reviewed-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NJens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

The handler for MVPG partial execution interception does not take
the current CPU addressing mode into account yet, so addresses are
always treated as 64-bit addresses. For correct behaviour, we should
properly handle 24-bit and 31-bit addresses, too.

Since MVPG is defined to work with logical addresses, we can simply
use guest_translate_address() to achieve the required behaviour
(since DAT is disabled here, guest_translate_address() skips the MMU
translation and only translates the address via kvm_s390_logical_to_effective()
and kvm_s390_real_to_abs(), which is exactly what we want here).
Signed-off-by: NThomas Huth <thuth@linux.vnet.ibm.com>
Acked-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

The kvm mutex was (probably) used to protect against cpu hotplug.
The current code no longer needs to protect against that, as we only
rely on CPU data structures that are guaranteed to be available
if we can access the CPU. (e.g. vcpu_create will put the cpu
in the array AFTER the cpu is ready).
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Acked-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: NJens Freimann <jfrei@linux.vnet.ibm.com>

Most SIGP orders are handled partially in kernel and partially in
user space. In order to:
- Get a correct SIGP SET PREFIX handler that informs user space
- Avoid race conditions between concurrently executed SIGP orders
- Serialize SIGP orders per VCPU

We need to handle all "slow" SIGP orders in user space. The remaining
ones to be handled completely in kernel are:
- SENSE
- SENSE RUNNING
- EXTERNAL CALL
- EMERGENCY SIGNAL
- CONDITIONAL EMERGENCY SIGNAL
According to the PoP, they have to be fast. They can be executed
without conflicting to the actions of other pending/concurrently
executing orders (e.g. STOP vs. START).

This patch introduces a new capability that will - when enabled -
forward all but the mentioned SIGP orders to user space. The
instruction counters in the kernel are still updated.
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

We need a way to clear the async pfault queue from user space (e.g.
for resets and SIGP SET ARCHITECTURE).

This patch simply clears the queue as soon as user space sets the
invalid pfault token. The definition of the invalid token is moved
to uapi.
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Acked-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

Only one external call may be pending at a vcpu at a time. For this
reason, we have to detect whether the SIGP externcal call interpretation
facility is available. If so, all external calls have to be injected
using this mechanism.

SIGP EXTERNAL CALL orders have to return whether another external
call is already pending. This check was missing until now.

SIGP SENSE hasn't returned yet in all conditions whether an external
call was pending.

If a SIGP EXTERNAL CALL irq is to be injected and one is already
pending, -EBUSY is returned.
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

This patch introduces the infrastructure to check whether the SIGP
Interpretation Facility is installed on all VCPUs in the configuration.
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Acked-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

This patch cleanes up the the SIGP SET PREFIX code.

A SIGP SET PREFIX irq may only be injected if the target vcpu is
stopped. Let's move the checking code into the injection code and
return -EBUSY if the target vcpu is not stopped.
Reviewed-by: NJens Freimann <jfrei@linux.vnet.ibm.com>
Acked-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

As a SIGP STOP is an interrupt with the least priority, it may only result
in stop of the vcpu when no other interrupts are left pending.

To detect whether a non-stop irq is pending, we need a way to mask out
stop irqs from the general kvm_cpu_has_interrupt() function. For this
reason, the existing function (with an outdated name) is replaced by
kvm_s390_vcpu_has_irq() which allows to mask out pending stop irqs.
Acked-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

This patch removes the famous action_bits and moves the handling of
SIGP STOP AND STORE STATUS directly into the SIGP STOP interrupt.

The new local interrupt infrastructure is used to track pending stop
requests.

STOP irqs are the only irqs that don't get actively delivered. They
remain pending until the stop function is executed (=stop intercept).

If another STOP irq is already pending, -EBUSY will now be returned
(needed for the SIGP handling code).

Migration of pending SIGP STOP (AND STORE STATUS) orders should now
be supported out of the box.
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Acked-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

In order to get rid of the action_flags and to properly migrate pending SIGP
STOP irqs triggered e.g. by SIGP STOP AND STORE STATUS, we need to remember
whether to store the status when stopping.

For this reason, a new parameter (flags) for the SIGP STOP irq is introduced.
These flags further define details of the requested STOP and can be easily
migrated.
Reviewed-by: NThomas Huth <thuth@linux.vnet.ibm.com>
Acked-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

Patch 0759d068 ("KVM: s390: cleanup handle_wait by reusing
kvm_vcpu_block") changed the way pending guest clock comparator
interrupts are detected. It was assumed that as soon as the hrtimer
wakes up, the condition for the guest ckc is satisfied.

This is however only true as long as adjclock() doesn't speed
up the monotonic clock. Reason is that the hrtimer is based on
CLOCK_MONOTONIC, the guest clock comparator detection is based
on the raw TOD clock. If CLOCK_MONOTONIC runs faster than the
TOD clock, the hrtimer wakes the target VCPU up too early and
the target VCPU will not detect any pending interrupts, therefore
going back to sleep. It will never be woken up again because the
hrtimer has finished. The VCPU is stuck.

As a quick fix, we have to forward the hrtimer until the guest
clock comparator is really due, to guarantee properly timed wake
ups.

As the hrtimer callback might be triggered on another cpu, we
have to make sure that the timer is really stopped and not currently
executing the callback on another cpu. This can happen if the vcpu
thread is scheduled onto another physical cpu, but the timer base
is not migrated. So lets use hrtimer_cancel instead of try_to_cancel.

A proper fix might be to introduce a RAW based hrtimer.
Reported-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Cc: stable@vger.kernel.org
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Acked-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

The hrtimer that handles the wait with enabled timer interrupts
should not be disturbed by changes of the host time.

This patch changes our hrtimer to be based on a monotonic clock.
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Acked-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Cc: stable@vger.kernel.org
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

We sometimes get an underflow for the sleep duration, which most
likely won't result in the short sleep time we wanted.

So let's check for sleep duration underflows and directly continue
to run the guest if we get one.
Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Acked-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

With commit c6c956b8 ("KVM: s390/mm: support gmap page tables with less
than 5 levels") we are able to define a limit for the guest memory size.

As we round up the guest size in respect to the levels of page tables
we get to guest limits of: 2048 MB, 4096 GB, 8192 TB and 16384 PB.
We currently limit the guest size to 16 TB, which means we end up
creating a page table structure supporting guest sizes up to 8192 TB.

This patch introduces an interface that allows userspace to tune
this limit. This may bring performance improvements for small guests.
Signed-off-by: NDominik Dingel <dingel@linux.vnet.ibm.com>
Acked-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

As we will allow in a later patch to recreate gmaps with new limits,
we need to make sure that vcpus get their reference for that gmap
after they increased the online_vcpu counter, so there is no possible race.

While we are doing this, we also can simplify the vcpu_init function, by
moving ucontrol specifics to an own function.
That way we also start now setting the kvm_valid_regs for the ucontrol path.
Reviewed-by: NJens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Acked-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NDominik Dingel <dingel@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

sparse rightfully complains about
warning: symbol '__inject_extcall' was not declared. Should it be static?
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

The return value of kvm_arch_vcpu_postcreate is not checked in its
caller.  This is okay, because only x86 provides vcpu_postcreate right
now and it could only fail if vcpu_load failed.  But that is not
possible during KVM_CREATE_VCPU (kvm_arch_vcpu_load is void, too), so
just get rid of the unchecked return value.
Signed-off-by: NDominik Dingel <dingel@linux.vnet.ibm.com>
Acked-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

Merge branch 'arm64/common-esr-macros' of git://git.kernel.org/pub/scm/linux/kernel/git/mark/linux into kvm-next

ESR_ELx definitions clean-up from Mark Rutland.

* 'arm64/common-esr-macros' of git://git.kernel.org/pub/scm/linux/kernel/git/mark/linux:
  arm64: kvm: decode ESR_ELx.EC when reporting exceptions
  arm64: kvm: remove ESR_EL2_* macros
  arm64: remove ESR_EL1_* macros
  arm64: kvm: move to ESR_ELx macros
  arm64: decode ESR_ELx.EC when reporting exceptions
  arm64: move to ESR_ELx macros
  arm64: introduce common ESR_ELx_* definitions

This is required by the patch "arm/arm64: KVM: add tracing support for
arm64 exit handler" in Christoffer's pull request.

The dirty patch logging series introduced both
HAVE_KVM_ARCH_DIRTY_LOG_PROTECT and KVM_GENERIC_DIRTYLOG_READ_PROTECT
config symbols, but only KVM_GENERIC_DIRTYLOG_READ_PROTECT is used.
Just remove the unused one.

(The config symbol was renamed during the development of the patch
series and the old name just creeped in by accident.()
Reported-by: NPaul Bolle <pebolle@tiscali.nl>
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>