- 14 3月, 2006 2 次提交
-
-
由 Vojtech Pavlik 提交于
Fix bat_xl and err_xl logic causing atkbd to complain about 'unknown key 0x7f'. Noted by Ben LaHaise. Signed-off-by: NVojtech Pavlik <vojtech@suse.cz> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Eric Sesterhenn 提交于
Signed-off-by: NEric Sesterhenn <snakebyte@gmx.de> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 19 2月, 2006 1 次提交
-
-
由 Ingo Molnar 提交于
The conversion was generated via scripts, and the result was validated automatically via a script as well. Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 15 2月, 2006 1 次提交
-
-
由 Arthur Othieno 提交于
98kbd{,-io} and 98spkr all went out with PC98 subarch. Remove stale Makefile entries that remained. Signed-off-by: NArthur Othieno <apgo@patchbomb.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 10 1月, 2006 1 次提交
-
-
由 Paul Mundt 提交于
These haven't worked in some time, and we've dropped support for the bus from the SH tree until someone shows some interest in maintaining it. Signed-off-by: NPaul Mundt <lethal@linux-sh.org> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 09 1月, 2006 1 次提交
-
-
由 Russell King 提交于
Some ARM platforms have the ability to program the interrupt controller to detect various interrupt edges and/or levels. For some platforms, this is critical to setup correctly, particularly those which the setting is dependent on the device. Currently, ARM drivers do (eg) the following: err = request_irq(irq, ...); set_irq_type(irq, IRQT_RISING); However, if the interrupt has previously been programmed to be level sensitive (for whatever reason) then this will cause an interrupt storm. Hence, if we combine set_irq_type() with request_irq(), we can then safely set the type prior to unmasking the interrupt. The unfortunate problem is that in order to support this, these flags need to be visible outside of the ARM architecture - drivers such as smc91x need these flags and they're cross-architecture. Finally, the SA_TRIGGER_* flag passed to request_irq() should reflect the property that the device would like. The IRQ controller code should do its best to select the most appropriate supported mode. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 06 1月, 2006 1 次提交
-
-
由 Dmitry Torokhov 提交于
Call serio_reconnect() instead of serio_rescan() when detecting that a new keyboard was plugged in. This should help KVM uses losing custom keymap settings when switching between boxes. Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 20 11月, 2005 1 次提交
-
-
由 Dmitry Torokhov 提交于
Changing led state is pretty slow operation; when there are multiple requests coming at a high rate they may interfere with normal typing. Try optimize (skip) changing hardware state when multiple requests are coming back-to-back. Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 10 11月, 2005 1 次提交
-
-
由 Russell King 提交于
This allows us to eliminate the casts in the drivers, and eventually remove the use of the device_driver function pointer methods for platform device drivers. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk> Acked-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 03 11月, 2005 3 次提交
-
-
由 Jan-Benedict Glaw 提交于
* Hide debugging code into #ifdef, which allows to simplify the large switch statement * Update macros to not reference variables not given as arguments Signed-off-by: NJan-Benedict Glaw <jbglaw@lug-owl.de> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Pavel Machek 提交于
Signed-off-by: NPavel Machek <pavel@suse.cz> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Dmitry Torokhov 提交于
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 01 11月, 2005 1 次提交
-
-
由 Arthur Othieno 提交于
CONFIG_PC is left-over cruft after the introduction of CONFIG_X86_PC with the subarch split. Remove it, and fixup the remaining users to depend on CONFIG_X86_PC instead. Signed-off-by: NArthur Othieno <a.othieno@bluewin.ch> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 31 10月, 2005 1 次提交
-
-
由 Dmitry Torokhov 提交于
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 30 10月, 2005 2 次提交
-
-
由 Russell King 提交于
Convert everyone who uses platform_bus_type to include linux/platform_device.h. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk> Acked-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Al Viro 提交于
it's input_allocate_device(), not input_dev_allocate()... Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 29 10月, 2005 2 次提交
-
-
由 Russell King 提交于
In PM v1, all devices were called at SUSPEND_DISABLE level. Then all devices were called at SUSPEND_SAVE_STATE level, and finally SUSPEND_POWER_DOWN level. However, with PM v2, to maintain compatibility for platform devices, I arranged for the PM v2 suspend/resume callbacks to call the old PM v1 suspend/resume callbacks three times with each level in order so that existing drivers continued to work. Since this is obsolete infrastructure which is no longer necessary, we can remove it. Here's an (untested) patch to do exactly that. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Dmitry Torokhov 提交于
Input: convert drivers/input/keyboard to dynamic input_dev allocation This is required for input_dev sysfs integration Signed-off-by: NDmitry Torokhov <dtor@mail.ru> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 22 10月, 2005 3 次提交
-
-
由 Matthew Wilcox 提交于
Update drivers to new input layer changes. Signed-off-by: NHelge Deller <deller@parisc-linux.org> Signed-off-by: NMatthew Wilcox <willy@parisc-linux.org> Reorder code in gscps2_interrupt() and only enable ports when opened. This fixes issues with hangs booting an SMP kernel on my C360. Previously serio_interrupt() could be called before the lock in struct serio was initialised. Signed-off-by: NRichard Hirst <rhirst@parisc-linux.org> Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>
-
由 Matthew Wilcox 提交于
Convert pa_dev->hpa from an unsigned long to a struct resource. Signed-off-by: NMatthew Wilcox <willy@parisc-linux.org> Fix up users of ->hpa to use ->hpa.start instead. Signed-off-by: NMatthew Wilcox <willy@parisc-linux.org> Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>
-
由 Matthew Wilcox 提交于
Make /sys/bus/parisc/drivers look better by cleaning up parisc_driver names. Signed-off-by: NMatthew Wilcox <willy@parisc-linux.org> Signed-off-by: NKyle McMartin <kyle@parisc-linux.org>
-
- 15 10月, 2005 1 次提交
-
-
由 Pavel Machek 提交于
This fixes depenencies of collie keyboard. Signed-off-by: NPavel Machek <pavel@suse.cz> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 14 10月, 2005 1 次提交
-
-
由 Richard Purdie 提交于
Patch from Richard Purdie Correct the right shift key entry in the spitz keyboard driver. Signed-off-by: NRichard Purdie <rpurdie@rpsys.net> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 13 9月, 2005 1 次提交
-
-
由 Richard Purdie 提交于
Add a input driver for the keyboard found on the Zaurus Cxx00 series (Spitz, Akita, Borzoi). Its based on corgikbd but there are enough subtle differences to justify a separate driver. Signed-Off-by: NRichard Purdie <rpurdie@rpsys.net> Cc: Vojtech Pavlik <vojtech@suse.cz> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 08 9月, 2005 5 次提交
-
-
由 Richard Purdie 提交于
The corgi keyboard has need of a switch event type with slightly type to the input system as recommended by the input maintainer. Signed-off-by: NRichard Purdie <rpurdie@rpsys.net> Cc: Vojtech Pavlik <vojtech@suse.cz> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Richard Purdie 提交于
The input system handles key state tracking so there's no need for the driver to do so as well. Also tidy up some comment formatting and remove a now unneeded function. Signed-off-by: NRichard Purdie <rpurdie@rpsys.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Richard Purdie 提交于
Add some power management code to the corgi keyboard driver so that only one power event gets reported within any reasonable time frame and the driver doesn't enter an infinte loop due to key repeat. Signed-off-by: NRichard Purdie <rpurdie@rpsys.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Richard Purdie 提交于
Fix a couple of compile errors in the corgi keyboard driver. Signed-off-by: NRichard Purdie <rpurdie@rpsys.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Pekka Enberg 提交于
This patch converts kcalloc(1, ...) calls to use the new kzalloc() function. Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi> Cc: Vojtech Pavlik <vojtech@suse.cz> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 05 9月, 2005 2 次提交
-
-
由 Vojtech Pavlik 提交于
Map an unmarked key at 'Esc' position to KEY_MACRO Signed-off-by: NVojtech Pavlik <vojtech@suse.cz> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Vojtech Pavlik 提交于
Extend bat_xl handling to do err_xl handling, so that keyboards using 0x7f scancode for regular keys can work. Signed-off-by: NVojtech Pavlik <vojtech@suse.cz> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
- 21 6月, 2005 1 次提交
-
-
由 Yani Ioannou 提交于
[PATCH] Driver Core: drivers/i2c/chips/w83781d.c - drivers/s390/block/dcssblk.c: update device attribute callbacks Signed-off-by: NYani Ioannou <yani.ioannou@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 08 6月, 2005 1 次提交
-
-
由 Vojtech Pavlik 提交于
This patch disables the scroll feature on AT keyboards by default, because it causes the numbers of mouse devices to shift, breaking user setups. Signed-off-by: NVojtech Pavlik <vojtech@suse.cz> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 29 5月, 2005 5 次提交
-
-
由 Dmitry Torokhov 提交于
functions as they are not doing anything. Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Dmitry Torokhov 提交于
Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Richard Purdie 提交于
as function keys instead of special keys. Signed-off-by: NRichard Purdie <rpurdie@rpsys.net> Signed-off-by: NVojtech Pavlik <vojtech@suse.cz> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Vojtech Pavlik 提交于
Signed-off-by: NVojtech Pavlik <vojtech@suse.cz> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Vojtech Pavlik 提交于
Signed-off-by: NVojtech Pavlik <vojtech@suse.cz> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 17 5月, 2005 1 次提交
-
-
由 Adrian Bunk 提交于
This patch fixes two possible off by one errors found by the Coverity checker (look at the period[i] and delay[j] in the two first unchanged lines). Signed-off-by: NAdrian Bunk <bunk@stusta.de> Cc: Vojtech Pavlik <vojtech@suse.cz> Cc: Dmitry Torokhov <dtor_core@ameritech.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 01 5月, 2005 1 次提交
-
-
由 Paul E. McKenney 提交于
This patch changes calls to synchronize_kernel(), deprecated in the earlier "Deprecate synchronize_kernel, GPL replacement" patch to instead call the new synchronize_rcu() and synchronize_sched() APIs. Signed-off-by: NPaul E. McKenney <paulmck@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-