hctx->state could come in handy for bugs where the hardware queue gets
stuck in the stopped state, and hctx->flags is just useful to know.
Signed-off-by: NOmar Sandoval <osandov@fb.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

In preparation for putting blk-mq debugging information in debugfs,
create a directory tree mirroring the one in sysfs:

    # tree -d /sys/kernel/debug/block
    /sys/kernel/debug/block
    |-- nvme0n1
    |   `-- mq
    |       |-- 0
    |       |   `-- cpu0
    |       |-- 1
    |       |   `-- cpu1
    |       |-- 2
    |       |   `-- cpu2
    |       `-- 3
    |           `-- cpu3
    `-- vda
        `-- mq
            `-- 0
                |-- cpu0
                |-- cpu1
                |-- cpu2
                `-- cpu3

Also add the scaffolding for the actual files that will go in here,
either under the hardware queue or software queue directories.
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NOmar Sandoval <osandov@fb.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

We don't trigger this from the normal IO path, since we always use
blocking allocations from there. But Bart saw it testing multipath
dm, since that is a heavy user of atomic request allocations in
the map and clone path.
Reported-by: NBart Van Assche <bart.vanassche@sandisk.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

If we come in from blk_mq_alloc_requst() with NOWAIT set in flags,
we must ensure that we don't later overwrite that in
blk_mq_sched_get_request(). Initialize alloc_data->flags before
passing it in.
Reported-by: NBart Van Assche <bart.vanassche@sandisk.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

If we have a scheduler attached, we have two sets of tags. We don't
want to apply our active queue throttling for the scheduler side
of tags, that only applies to driver tags since that's the resource
we need to dispatch an IO.
Signed-off-by: NJens Axboe <axboe@fb.com>

The script "checkpatch.pl" pointed information out like the following.

ERROR: do not use assignment in if condition

Thus fix the affected source code place.
Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net>
Signed-off-by: NJens Axboe <axboe@fb.com>

The script "checkpatch.pl" pointed information out like the following.

ERROR: do not use assignment in if condition

Thus fix the affected source code places.
Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: NJens Axboe <axboe@fb.com>

KMSAN (KernelMemorySanitizer, a new error detection tool) reports use of
uninitialized memory in cfq_init_cfqq():

==================================================================
BUG: KMSAN: use of unitialized memory
...
Call Trace:
 [<     inline     >] __dump_stack lib/dump_stack.c:15
 [<ffffffff8202ac97>] dump_stack+0x157/0x1d0 lib/dump_stack.c:51
 [<ffffffff813e9b65>] kmsan_report+0x205/0x360 ??:?
 [<ffffffff813eabbb>] __msan_warning+0x5b/0xb0 ??:?
 [<     inline     >] cfq_init_cfqq block/cfq-iosched.c:3754
 [<ffffffff8201e110>] cfq_get_queue+0xc80/0x14d0 block/cfq-iosched.c:3857
...
origin:
 [<ffffffff8103ab37>] save_stack_trace+0x27/0x50 arch/x86/kernel/stacktrace.c:67
 [<ffffffff813e836b>] kmsan_internal_poison_shadow+0xab/0x150 ??:?
 [<ffffffff813e88ab>] kmsan_poison_slab+0xbb/0x120 ??:?
 [<     inline     >] allocate_slab mm/slub.c:1627
 [<ffffffff813e533f>] new_slab+0x3af/0x4b0 mm/slub.c:1641
 [<     inline     >] new_slab_objects mm/slub.c:2407
 [<ffffffff813e0ef3>] ___slab_alloc+0x323/0x4a0 mm/slub.c:2564
 [<     inline     >] __slab_alloc mm/slub.c:2606
 [<     inline     >] slab_alloc_node mm/slub.c:2669
 [<ffffffff813dfb42>] kmem_cache_alloc_node+0x1d2/0x1f0 mm/slub.c:2746
 [<ffffffff8201d90d>] cfq_get_queue+0x47d/0x14d0 block/cfq-iosched.c:3850
...
==================================================================
(the line numbers are relative to 4.8-rc6, but the bug persists
upstream)

The uninitialized struct cfq_queue is created by kmem_cache_alloc_node()
and then passed to cfq_init_cfqq(), which accesses cfqq->ioprio_class
before it's initialized.
Signed-off-by: NAlexander Potapenko <glider@google.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Add support for growing the tags associated with a hardware queue, for
the scheduler tags. Currently we only support resizing within the
limits of the original depth, change that so we can grow it as well by
allocating and replacing the existing scheduler tag set.

This is similar to how we could increase the software queue depth with
the legacy IO stack and schedulers.
Signed-off-by: NJens Axboe <axboe@fb.com>
Reviewed-by: NOmar Sandoval <osandov@fb.com>

The run handler we register for the delayed work requires that the
queue be stopped, yet we leave that up to the caller. Let's move
it into blk_mq_delay_queue() itself, so that the API is sane.

This fixes a stall with SCSI, where it calls blk_mq_delay_queue()
without having stopped the queue. Hence the queue is never run.
Reported-by: NHannes Reinecke <hare@suse.com>
Fixes: 70f4db63 ("blk-mq: add blk_mq_delay_queue")
Signed-off-by: NJens Axboe <axboe@fb.com>

We used to pass in NULL for hctx for reserved tags, but we don't
do that anymore. Hence the check for whether hctx is NULL or not
is now redundant, kill it.
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Fixes: a642a158aec6 ("blk-mq-tag: cleanup the normal/reserved tag allocation")
Signed-off-by: NJens Axboe <axboe@fb.com>

We already checked that e is NULL, so no point in calling
elevator_put() to free it.
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Fixes: dc877dbd088f ("blk-mq-sched: add framework for MQ capable IO schedulers")
Signed-off-by: NJens Axboe <axboe@fb.com>

There's no potential harm in quiescing the queue, but it also doesn't
buy us anything. And we can't run the queue async for policy
deactivate, since we could be in the path of tearing the queue down.
If we schedule an async run of the queue at that time, we're racing
with queue teardown AFTER having we've already torn most of it down.
Reported-by: NOmar Sandoval <osandov@fb.com>
Fixes: 4d199c6f ("blk-cgroup: ensure that we clear the stop bit on quiesced queues")
Tested-by: NOmar Sandoval <osandov@fb.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

When we resize a struct sbitmap_queue, we update the wakeup batch size,
but we don't update the wait count in the struct sbq_wait_states. If we
resized down from a size which could use a bigger batch size, these
counts could be too large and cause us to miss necessary wakeups. To fix
this, update the wait counts when we resize (ensuring some careful
memory ordering so that it's safe w.r.t. concurrent clears).

This also fixes a theoretical issue where two threads could end up
bumping the wait count up by the batch size, which could also
potentially lead to hangs.
Reported-by: NMartin Raiber <martin@urbackup.org>
Fixes: e3a2b3f9 ("blk-mq: allow changing of queue depth through sysfs")
Fixes: 2971c35f ("blk-mq: bitmap tag: fix race on blk_mq_bitmap_tags::wake_cnt")
Signed-off-by: NOmar Sandoval <osandov@fb.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

We always do an atomic clear_bit() right before we call sbq_wake_up(),
so we can use smp_mb__after_atomic(). While we're here, comment the
memory barriers in here a little more.
Signed-off-by: NOmar Sandoval <osandov@fb.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

If we call blk_mq_quiesce_queue() on a queue, we must remember to
pair that with something that clears the stopped by on the
queues later on.
Signed-off-by: NJens Axboe <axboe@fb.com>

Add Kconfig entries to manage what devices get assigned an MQ
scheduler, and add a blk-mq flag for drivers to opt out of scheduling.
The latter is useful for admin type queues that still allocate a blk-mq
queue and tag set, but aren't use for normal IO.
Signed-off-by: NJens Axboe <axboe@fb.com>
Reviewed-by: NBart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: NOmar Sandoval <osandov@fb.com>

This is basically identical to deadline-iosched, except it registers
as a MQ capable scheduler. This is still a single queue design.
Signed-off-by: NJens Axboe <axboe@fb.com>
Reviewed-by: NBart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: NOmar Sandoval <osandov@fb.com>

This adds a set of hooks that intercepts the blk-mq path of
allocating/inserting/issuing/completing requests, allowing
us to develop a scheduler within that framework.

We reuse the existing elevator scheduler API on the registration
side, but augment that with the scheduler flagging support for
the blk-mq interfce, and with a separate set of ops hooks for MQ
devices.

We split driver and scheduler tags, so we can run the scheduling
independently of device queue depth.
Signed-off-by: NJens Axboe <axboe@fb.com>
Reviewed-by: NBart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: NOmar Sandoval <osandov@fb.com>

This is in preparation for having two sets of tags available. For
that we need a static index, and a dynamically assignable one.
Signed-off-by: NJens Axboe <axboe@fb.com>
Reviewed-by: NOmar Sandoval <osandov@fb.com>

No functional change in this patch, just in preparation for having
two types of tags available to the block layer for a single request.
Signed-off-by: NJens Axboe <axboe@fb.com>
Reviewed-by: NOmar Sandoval <osandov@fb.com>

Prep patch for adding an extra tag map for scheduler requests.
Signed-off-by: NJens Axboe <axboe@fb.com>
Reviewed-by: NBart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: NOmar Sandoval <osandov@fb.com>

This is in preparation for having another tag set available. Cleanup
the parameters, and allow passing in of tags for blk_mq_put_tag().
Signed-off-by: NJens Axboe <axboe@fb.com>
[hch: even more cleanups]
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NOmar Sandoval <osandov@fb.com>

Signed-off-by: NJens Axboe <axboe@fb.com>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: NOmar Sandoval <osandov@fb.com>

It's only used in blk-mq, kill it from the main exported header
and kill the symbol export as well.
Signed-off-by: NJens Axboe <axboe@fb.com>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: NBart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NOmar Sandoval <osandov@fb.com>

We want to use it outside of blk-core.c.
Signed-off-by: NJens Axboe <axboe@fb.com>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: NBart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NOmar Sandoval <osandov@fb.com>

Prep patch for adding MQ ops as well, since doing anon unions with
named initializers doesn't work on older compilers.
Signed-off-by: NJens Axboe <axboe@fb.com>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: NBart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: NOmar Sandoval <osandov@fb.com>

If a GUID Partition Table claims to have more than 2**25 entries, the
calculation of the partition table size in alloc_read_gpt_entries() will
overflow a 32-bit integer and not enough space will be allocated for the
table.

Nothing seems to get written out of bounds, but later efi_partition() will
read up to 32768 bytes from a 128 byte buffer, possibly OOPSing or exposing
information to /proc/partitions and uevents.

The problem exists on both 64-bit and 32-bit platforms.

Fix the overflow and also print a meaningful debug message if the table
size is too large.
Signed-off-by: NAlden Tondettar <alden.tondettar@gmail.com>
Acked-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NJens Axboe <axboe@fb.com>

The old maintainers email is bouncing and I've rewritten most of this
driver in the recent months.  Also add linux-block to the mailinglist
and remove the old tree, I will send patches through the linux-block
tree.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fb.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

We never change it, make that clear.
Signed-off-by: NJens Axboe <axboe@fb.com>
Reviewed-by: NBart Van Assche <bart.vanassche@sandisk.com>

If the last bvec of the 1st bio and the 1st bvec of the next
bio are physically contigious, and the latter can be merged
to last segment of the 1st bio, we should think they don't
violate sg gap(or virt boundary) limit.

Both Vitaly and Dexuan reported lots of unmergeable small bios
are observed when running mkfs on Hyper-V virtual storage, and
performance becomes quite low. This patch fixes that performance
issue.

The same issue should exist on NVMe, since it sets virt boundary too.
Reported-by: NVitaly Kuznetsov <vkuznets@redhat.com>
Reported-by: NDexuan Cui <decui@microsoft.com>
Tested-by: NDexuan Cui <decui@microsoft.com>
Cc: Keith Busch <keith.busch@intel.com>
Signed-off-by: NMing Lei <ming.lei@canonical.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

The raw_cmd_copyin() function does a kmalloc() with GFP_USER, although the
allocated structure is obviously not mapped to userspace, just copied from/to.
In this case GFP_KERNEL is more appropriate, so let's use it, although in the
current implementation this does not manifest as any error.
Reported-by: NMatthew Wilcox <mawilcox@linuxonhyperv.com>
Signed-off-by: NVlastimil Babka <vbabka@suse.cz>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Pull USB fixes from Greg KH:
 "Here are a bunch of USB fixes for 4.10-rc3. Yeah, it's a lot, an
  artifact of the holiday break I think.

  Lots of gadget and the usual XHCI fixups for reported issues (one day
  that driver will calm down...) Also included are a bunch of usb-serial
  driver fixes, and for good measure, a number of much-reported MUSB
  driver issues have finally been resolved.

  All of these have been in linux-next with no reported issues"

* tag 'usb-4.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (72 commits)
  USB: fix problems with duplicate endpoint addresses
  usb: ohci-at91: use descriptor-based gpio APIs correctly
  usb: storage: unusual_uas: Add JMicron JMS56x to unusual device
  usb: hub: Move hub_port_disable() to fix warning if PM is disabled
  usb: musb: blackfin: add bfin_fifo_offset in bfin_ops
  usb: musb: fix compilation warning on unused function
  usb: musb: Fix trying to free already-free IRQ 4
  usb: musb: dsps: implement clear_ep_rxintr() callback
  usb: musb: core: add clear_ep_rxintr() to musb_platform_ops
  USB: serial: ti_usb_3410_5052: fix NULL-deref at open
  USB: serial: spcp8x5: fix NULL-deref at open
  USB: serial: quatech2: fix sleep-while-atomic in close
  USB: serial: pl2303: fix NULL-deref at open
  USB: serial: oti6858: fix NULL-deref at open
  USB: serial: omninet: fix NULL-derefs at open and disconnect
  USB: serial: mos7840: fix misleading interrupt-URB comment
  USB: serial: mos7840: remove unused write URB
  USB: serial: mos7840: fix NULL-deref at open
  USB: serial: mos7720: remove obsolete port initialisation
  USB: serial: mos7720: fix parallel probe
  ...

Pull char/misc fixes from Greg KH:
 "Here are a few small char/misc driver fixes for 4.10-rc3.

  Two MEI driver fixes, and three NVMEM patches for reported issues, and
  a new Hyper-V driver MAINTAINER update. Nothing major at all, all have
  been in linux-next with no reported issues"

* tag 'char-misc-4.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  hyper-v: Add myself as additional MAINTAINER
  nvmem: fix nvmem_cell_read() return type doc
  nvmem: imx-ocotp: Fix wrong register size
  nvmem: qfprom: Allow single byte accesses for read/write
  mei: move write cb to completion on credentials failures
  mei: bus: fix mei_cldev_enable KDoc

Pull staging/IIO fixes from Greg KH:
 "Here are some staging and IIO driver fixes for 4.10-rc3.

  Most of these are minor IIO fixes of reported issues, along with one
  network driver fix to resolve an issue. And a MAINTAINERS update with
  a new mailing list. All of these, except the MAINTAINERS file update,
  have been in linux-next with no reported issues (the MAINTAINERS patch
  happened on Friday...)"

* tag 'staging-4.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  MAINTAINERS: add greybus subsystem mailing list
  staging: octeon: Call SET_NETDEV_DEV()
  iio: accel: st_accel: fix LIS3LV02 reading and scaling
  iio: common: st_sensors: fix channel data parsing
  iio: max44000: correct value in illuminance_integration_time_available
  iio: adc: TI_AM335X_ADC should depend on HAS_DMA
  iio: bmi160: Fix time needed to sleep after command execution
  iio: 104-quad-8: Fix active level mismatch for the preset enable option
  iio: 104-quad-8: Fix off-by-one errors when addressing IOR
  iio: 104-quad-8: Fix index control configuration

Several people report seeing warnings about inconsistent radix tree
nodes followed by crashes in the workingset code, which all looked like
use-after-free access from the shadow node shrinker.

Dave Jones managed to reproduce the issue with a debug patch applied,
which confirmed that the radix tree shrinking indeed frees shadow nodes
while they are still linked to the shadow LRU:

  WARNING: CPU: 2 PID: 53 at lib/radix-tree.c:643 delete_node+0x1e4/0x200
  CPU: 2 PID: 53 Comm: kswapd0 Not tainted 4.10.0-rc2-think+ #3
  Call Trace:
     delete_node+0x1e4/0x200
     __radix_tree_delete_node+0xd/0x10
     shadow_lru_isolate+0xe6/0x220
     __list_lru_walk_one.isra.4+0x9b/0x190
     list_lru_walk_one+0x23/0x30
     scan_shadow_nodes+0x2e/0x40
     shrink_slab.part.44+0x23d/0x5d0
     shrink_node+0x22c/0x330
     kswapd+0x392/0x8f0

This is the WARN_ON_ONCE(!list_empty(&node->private_list)) placed in the
inlined radix_tree_shrink().

The problem is with 14b46879 ("mm: workingset: move shadow entry
tracking to radix tree exceptional tracking"), which passes an update
callback into the radix tree to link and unlink shadow leaf nodes when
tree entries change, but forgot to pass the callback when reclaiming a
shadow node.

While the reclaimed shadow node itself is unlinked by the shrinker, its
deletion from the tree can cause the left-most leaf node in the tree to
be shrunk.  If that happens to be a shadow node as well, we don't unlink
it from the LRU as we should.

Consider this tree, where the s are shadow entries:

       root->rnode
            |
       [0       n]
        |       |
     [s    ] [sssss]

Now the shadow node shrinker reclaims the rightmost leaf node through
the shadow node LRU:

       root->rnode
            |
       [0        ]
        |
    [s     ]

Because the parent of the deleted node is the first level below the
root and has only one child in the left-most slot, the intermediate
level is shrunk and the node containing the single shadow is put in
its place:

       root->rnode
            |
       [s        ]

The shrinker again sees a single left-most slot in a first level node
and thus decides to store the shadow in root->rnode directly and free
the node - which is a leaf node on the shadow node LRU.

  root->rnode
       |
       s

Without the update callback, the freed node remains on the shadow LRU,
where it causes later shrinker runs to crash.

Pass the node updater callback into __radix_tree_delete_node() in case
the deletion causes the left-most branch in the tree to collapse too.

Also add warnings when linked nodes are freed right away, rather than
wait for the use-after-free when the list is scanned much later.

Fixes: 14b46879 ("mm: workingset: move shadow entry tracking to radix tree exceptional tracking")
Reported-by: NDave Chinner <david@fromorbit.com>
Reported-by: NHugh Dickins <hughd@google.com>
Reported-by: NAndrea Arcangeli <aarcange@redhat.com>
Reported-and-tested-by: NDave Jones <davej@codemonkey.org.uk>
Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Chris Leech <cleech@redhat.com>
Cc: Lee Duncan <lduncan@suse.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Matthew Wilcox <mawilcox@linuxonhyperv.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

4.10-rc loadtest (even on x86, and even without THPCache) fails with
"fork: Cannot allocate memory" or some such; and /proc/meminfo shows
PageTables growing.

Commit 953c66c2 ("mm: THP page cache support for ppc64") that got
merged in rc1 removed the freeing of an unused preallocated pagetable
after do_fault_around() has called map_pages().

This is usually a good optimization, so that the followup doesn't have
to reallocate one; but it's not sufficient to shift the freeing into
alloc_set_pte(), since there are failure cases (most commonly
VM_FAULT_RETRY) which never reach finish_fault().

Check and free it at the outer level in do_fault(), then we don't need
to worry in alloc_set_pte(), and can restore that to how it was (I
cannot find any reason to pte_free() under lock as it was doing).

And fix a separate pagetable leak, or crash, introduced by the same
change, that could only show up on some ppc64: why does do_set_pmd()'s
failure case attempt to withdraw a pagetable when it never deposited
one, at the same time overwriting (so leaking) the vmf->prealloc_pte?
Residue of an earlier implementation, perhaps? Delete it.

Fixes: 953c66c2 ("mm: THP page cache support for ppc64")
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Michael Neuling <mikey@neuling.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NHugh Dickins <hughd@google.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull kbuild fix from Michal Marek:
 "The asm-prototypes.h file added in the last merge window results in
  invalid code with CONFIG_KMEMCHECK=y. The net result is that genksyms
  segfaults.

  This pull request fixes the header, the genksyms fix is in my kbuild
  branch for 4.11"

* 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  asm-prototypes: Clear any CPP defines before declaring the functions

The Greybus driver subsystem has a mailing list, so list it in the
MAINTAINERS file so that people know to send patches there as well.
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: NJohan Hovold <johan@kernel.org>
Reviewed-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>