Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 01 3月, 2010 1 次提交
  3. 14 2月, 2010 1 次提交
  5. 02 2月, 2010 1 次提交
    • L
      tracing: Fix circular dead lock in stack trace · 4f48f8b7
      由 Lai Jiangshan 提交于 
      When we cat <debugfs>/tracing/stack_trace, we may cause circular lock:
sys_read()
  t_start()
     arch_spin_lock(&max_stack_lock);

  t_show()
     seq_printf(), vsnprintf() .... /* they are all trace-able,
       when they are traced, max_stack_lock may be required again. */

The following script can trigger this circular dead lock very easy:
#!/bin/bash

echo 1 > /proc/sys/kernel/stack_tracer_enabled

mount -t debugfs xxx /mnt > /dev/null 2>&1

(
# make check_stack() zealous to require max_stack_lock
for ((; ;))
{
	echo 1 > /mnt/tracing/stack_max_size
}
) &

for ((; ;))
{
	cat /mnt/tracing/stack_trace > /dev/null
}

To fix this bug, we increase the percpu trace_active before
require the lock.
Reported-by: NLi Zefan <lizf@cn.fujitsu.com>
Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com>
LKML-Reference: <4B67D4F9.9080905@cn.fujitsu.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
      4f48f8b7
  7. 27 1月, 2010 3 次提交
    • M
      tracing/documentation: Cover new frame pointer semantics · 03688970
      由 Mike Frysinger 提交于 
      Update the graph tracer examples to cover the new frame pointer semantics
(in terms of passing it along).  Move the HAVE_FUNCTION_GRAPH_FP_TEST docs
out of the Kconfig, into the right place, and expand on the details.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
LKML-Reference: <1264165967-18938-1-git-send-email-vapier@gentoo.org>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
      03688970
    • S
      ring-buffer: Check for end of page in iterator · 3c05d748
      由 Steven Rostedt 提交于 
      If the iterator comes to an empty page for some reason, or if
the page is emptied by a consuming read. The iterator code currently
does not check if the iterator is pass the contents, and may
return a false entry.

This patch adds a check to the ring buffer iterator to test if the
current page has been completely read and sets the iterator to the
next page if necessary.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
      3c05d748
    • S
      ring-buffer: Check if ring buffer iterator has stale data · 492a74f4
      由 Steven Rostedt 提交于 
      Usually reads of the ring buffer is performed by a single task.
There are two types of reads from the ring buffer.

One is a consuming read which will consume the entry that was read
and the next read will be the entry that follows.

The other is an iterator that will let the user read the contents of
the ring buffer without modifying it. When an iterator is allocated,
writes to the ring buffer are disabled to protect the iterator.

The problem exists when consuming reads happen while an iterator is
allocated. Specifically, the kind of read that swaps out an entire
page (used by splice) and replaces it with a new read. If the iterator
is on the page that is swapped out, then the next read may read
from this swapped out page and return garbage.

This patch adds a check when reading the iterator to make sure that
the iterator contents are still valid. If a consuming read has taken
place, the iterator is reset.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
      492a74f4
  9. 26 1月, 2010 1 次提交
    • S
      tracing: Prevent kernel oops with corrupted buffer · 74bf4076
      由 Steven Rostedt 提交于 
      If the contents of the ftrace ring buffer gets corrupted and the trace
file is read, it could create a kernel oops (usualy just killing the user
task thread). This is caused by the checking of the pid in the buffer.
If the pid is negative, it still references the cmdline cache array,
which could point to an invalid address.

The simple fix is to test for negative PIDs.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
      74bf4076
  11. 15 1月, 2010 6 次提交
  13. 07 1月, 2010 2 次提交
    • S
      ring-buffer: Add rb_list_head() wrapper around new reader page next field · 0e1ff5d7
      由 Steven Rostedt 提交于 
      If the very unlikely case happens where the writer moves the head by one
between where the head page is read and where the new reader page
is assigned _and_ the writer then writes and wraps the entire ring buffer
so that the head page is back to what was originally read as the head page,
the page to be swapped will have a corrupted next pointer.

Simple solution is to wrap the assignment of the next pointer with a
rb_list_head().
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
      0e1ff5d7
    • D
      ring-buffer: Wrap a list.next reference with rb_list_head() · 5ded3dc6
      由 David Sharp 提交于 
      This reference at the end of rb_get_reader_page() was causing off-by-one
writes to the prev pointer of the page after the reader page when that
page is the head page, and therefore the reader page has the RB_PAGE_HEAD
flag in its list.next pointer. This eventually results in a GPF in a
subsequent call to rb_set_head_page() (usually from rb_get_reader_page())
when that prev pointer is dereferenced. The dereferenced register would
characteristically have an address that appears shifted left by one byte
(eg, ffxxxxxxxxxxxxyy instead of ffffxxxxxxxxxxxx) due to being written at
an address one byte too high.
Signed-off-by: NDavid Sharp <dhsharp@google.com>
LKML-Reference: <1262826727-9090-1-git-send-email-dhsharp@google.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
      5ded3dc6
  15. 30 12月, 2009 6 次提交
  17. 28 12月, 2009 1 次提交
  19. 22 12月, 2009 1 次提交
  21. 17 12月, 2009 2 次提交
    • F
      perf events, x86/stacktrace: Make stack walking optional · 61c1917f
      由 Frederic Weisbecker 提交于 
      The current print_context_stack helper that does the stack
walking job is good for usual stacktraces as it walks through
all the stack and reports even addresses that look unreliable,
which is nice when we don't have frame pointers for example.

But we have users like perf that only require reliable
stacktraces, and those may want a more adapted stack walker, so
lets make this function a callback in stacktrace_ops that users
can tune for their needs.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1261024834-5336-1-git-send-regression-fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      61c1917f
    • M
      kprobe-tracer: Check new event/group name · 6f3cf440
      由 Masami Hiramatsu 提交于 
      Check new event/group name is same syntax as a C symbol. In other
words, checking the name is as like as other tracepoint events.

This can prevent user to create an event with useless name (e.g.
foo|bar, foo*bar).
Signed-off-by: NMasami Hiramatsu <mhiramat@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Jason Baron <jbaron@redhat.com>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: systemtap <systemtap@sources.redhat.com>
Cc: DLE <dle-develop@lists.sourceforge.net>
LKML-Reference: <20091216222408.14459.68790.stgit@dhcp-100-2-132.bos.redhat.com>
[ v2: minor cleanups ]
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      6f3cf440
  23. 16 12月, 2009 1 次提交
  25. 15 12月, 2009 4 次提交
  27. 14 12月, 2009 10 次提交