This patch adds a `vcpu_id' field in `struct vcpu', so we can
differentiate BSP and APs without pointer comparison or arithmetic.
Signed-off-by: NQing He <qing.he@intel.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

A guest context switch to an uncached cr3 can require allocation of
shadow pages, but we only recycle shadow pages in kvm_mmu_page_fault().

Move shadow page recycling to mmu_topup_memory_caches(), which is called
from both the page fault handler and from guest cr3 reload.
Signed-off-by: NAvi Kivity <avi@qumranet.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Allow real-mode emulation of rdmsr and wrmsr.  This allows smp Windows to
boot, presumably for its sipi trampoline.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

The memory slot management functions were oriented against vcpu 0, where
they should be kvm-wide.  This causes hangs starting X on guest smp.

Fix by making the functions (and resultant tail in the mmu) non-vcpu-specific.
Unfortunately this reduces the efficiency of the mmu object cache a bit.  We
may have to revisit this later.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

We need to distinguish between large page shadows which have the nx bit set
and those which don't.  The problem shows up when booting a newer smp Linux
kernel, where the trampoline page (which is in real mode, which uses the
same shadow pages as large pages) is using the same mapping as a kernel data
page, which is mapped using nx, causing kvm to spin on that page.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Useful for the PIC and PIT.
Signed-off-by: NYaozu (Eddie) Dong <eddie.dong@intel.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Signed-off-by: NGregory Haskins <ghaskins@novell.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

When a vcpu causes a shadow tlb entry to have reduced permissions, it
must also clear the tlb on remote vcpus.  We do that by:

- setting a bit on the vcpu that requests a tlb flush before the next entry
- if the vcpu is currently executing, we send an ipi to make sure it
  exits before we continue
Signed-off-by: NAvi Kivity <avi@qumranet.com>

That way, we don't need to loop for KVM_MAX_VCPUS for a single vcpu
vm.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

This has two use cases: the bios can't boot from disk, and guest smp
bootstrap.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Will soon have a thid user.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

As we don't support guest tlb shootdown yet, this is only reliable
for real-mode guests.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Switch guest paging context may require us to allocate memory, which
might fail.  Instead of wiring up error paths everywhere, make context
switching lazy and actually do the switch before the next guest entry,
where we can return an error if allocation fails.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Use slab caches instead of a simple custom list.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

KVM compilation fails for some .configs.  This fixes it.
Signed-off-by: NMarkus Rechberger <markus.rechberger@amd.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

MSR_EFER.LME/LMA bits are automatically save/restored by VMX
hardware, KVM only needs to save NX/SCE bits at time of heavy
weight VM Exit. But clearing NX bits in host envirnment may
cause system hang if the host page table is using EXB bits,
thus we leave NX bits as it is. If Host NX=1 and guest NX=0, we
can do guest page table EXB bits check before inserting a shadow
pte (though no guest is expecting to see this kind of gp fault).
If host NX=0, we present guest no Execute-Disable feature to guest,
thus no host NX=0, guest NX=1 combination.

This patch reduces raw vmexit time by ~27%.

Me: fix compile warnings on i386.
Signed-off-by: NYaozu (Eddie) Dong <eddie.dong@intel.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

In a lightweight exit (where we exit and reenter the guest without
scheduling or exiting to userspace in between), we don't need various
msrs on the host, and avoiding shuffling them around reduces raw exit
time by 8%.

i386 compile fix by Daniel Hecken <dh@bahntechnik.de>.
Signed-off-by: NYaozu (Eddie) Dong <eddie.dong@intel.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Simpifies things a bit.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

This allows fwait instructions to be trapped when the guest fpu is not
loaded.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Easier to keep track of where the fpu is this way.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

The lightweight vmexit path avoids saving and reloading certain host
state.  However in certain cases lightweight vmexit handling can schedule()
which requires reloading the host state.

So we store the host state in the vcpu structure, and reloaded it if we
relinquish the vcpu.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

This improves kbuild times by about 10%, bringing it within a respectable
25% of native.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Instead of calling two functions and repeating expensive checks, call one
function and provide it with before/after information.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Many msrs and the like will only be used by the host if we schedule() or
return to userspace.  Therefore, we avoid saving them if we handle the
exit within the kernel, and if a reschedule is not requested.

Based on a patch from Eddie Dong <eddie.dong@intel.com> with a couple of
fixes by me.
Signed-off-by: NYaozu(Eddie) Dong <eddie.dong@intel.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

The lazy fpu changes did not take into account that some vmexit handlers
can sleep.  Move loading the guest state into the inner loop so that it
can be reloaded if necessary, and move loading the host state into
vmx_vcpu_put() so it can be performed whenever we relinquish the vcpu.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

First thing mm.h does is including sched.h solely for can_do_mlock() inline
function which has "current" dereference inside. By dealing with can_do_mlock()
mm.h can be detached from sched.h which is good. See below, why.

This patch
a) removes unconditional inclusion of sched.h from mm.h
b) makes can_do_mlock() normal function in mm/mlock.c
c) exports can_do_mlock() to not break compilation
d) adds sched.h inclusions back to files that were getting it indirectly.
e) adds less bloated headers to some files (asm/signal.h, jiffies.h) that were
   getting them indirectly

Net result is:
a) mm.h users would get less code to open, read, preprocess, parse, ... if
   they don't need sched.h
b) sched.h stops being dependency for significant number of files:
   on x86_64 allmodconfig touching sched.h results in recompile of 4083 files,
   after patch it's only 3744 (-8.3%).

Cross-compile tested on

	all arm defconfigs, all mips defconfigs, all powerpc defconfigs,
	alpha alpha-up
	arm
	i386 i386-up i386-defconfig i386-allnoconfig
	ia64 ia64-up
	m68k
	mips
	parisc parisc-up
	powerpc powerpc-up
	s390 s390-up
	sparc sparc-up
	sparc64 sparc64-up
	um-x86_64
	x86_64 x86_64-up x86_64-defconfig x86_64-allnoconfig

as well as my two usual configs.
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When emulating an mmio read, we actually emulate twice: once to determine
the physical address of the mmio, and, after we've exited to userspace to
get the mmio value, we emulate again to place the value in the result
register and update any flags.

But we don't really need to enter the guest again for that, only to take
an immediate vmexit.  So, if we detect that we're doing an mmio read,
emulate a single instruction before entering the guest again.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Set all of the host mask bits for CR0 so that we can maintain a proper
shadow of CR0.  This exposes CR0.TS, paving the way for lazy fpu handling.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Avoid saving and restoring the guest fpu state on every exit.  This
shaves ~100 cycles off the guest/host switch.
Signed-off-by: NAnthony Liguori <aliguori@us.ibm.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Make the exit statistics per-vcpu instead of global.  This gives a 3.5%
boost when running one virtual machine per core on my two socket dual core
(4 cores total) machine.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Better leak detection, statistics, memory use, speed -- goodness all
around.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

With this, we can specify that accesses to one physical memory range will
be remapped to another.  This is useful for the vga window at 0xa0000 which
is used as a movable window into the (much larger) framebuffer.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Mapping a guest page to a host page is a common operation.  Currently,
one has first to find the memory slot where the page belongs (gfn_to_memslot),
then locate the page itself (gfn_to_page()).

This is clumsy, and also won't work well with memory aliases.  So simplify
gfn_to_page() not to require memory slot translation first, and instead do it
internally.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Functions that play around with the physical memory map
need a way to clear mappings to possibly nonexistent or
invalid memory.  Both the mmu cache and the processor tlb
are cleared.
Signed-off-by: NDor Laor <dor.laor@qumranet.com>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

When a vcpu is migrated from one cpu to another, its timestamp counter
may lose its monotonic property if the host has unsynced timestamp counters.
This can confuse the guest, sometimes to the point of refusing to boot.

As the rdtsc instruction is rather fast on AMD processors (7-10 cycles),
we can simply record the last host tsc when we drop the cpu, and adjust
the vcpu tsc offset when we detect that we've migrated to a different cpu.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

The kvm mmu keeps a shadow page for hugepage pdes; if several such pdes map
the same physical address, they share the same shadow page.  This is a fairly
common case (kernel mappings on i386 nonpae Linux, for example).

However, if the two pdes map the same memory but with different permissions, kvm
will happily use the cached shadow page.  If the access through the more
permissive pde will occur after the access to the strict pde, an endless pagefault
loop will be generated and the guest will make no progress.

Fix by making the access permissions part of the cache lookup key.

The fix allows Xen pae to boot on kvm and run guest domains.

Thanks to Jeremy Fitzhardinge for reporting the bug and testing the fix.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

set_cr0_no_modeswitch() was a hack to avoid corrupting segment registers.
As we now cache the protected mode values on entry to real mode, this
isn't an issue anymore, and it interferes with reboot (which usually _is_
a modeswitch).
Signed-off-by: NAvi Kivity <avi@qumranet.com>

The initial, noncaching, version of the kvm mmu flushed the all nonglobal
shadow page table translations (much like a native tlb flush).  The new
implementation flushes translations only when they change, rendering global
pte tracking superfluous.

This removes the unused tracking mechanism and storage space.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

The current string pio interface communicates using guest virtual addresses,
relying on userspace to translate addresses and to check permissions.  This
interface cannot fully support guest smp, as the check needs to take into
account two pages at one in case an unaligned string transfer straddles a
page boundary.

Change the interface not to communicate guest addresses at all; instead use
a buffer page (mmaped by userspace) and do transfers there.  The kernel
manages the virtual to physical translation and can perform the checks
atomically by taking the appropriate locks.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Allow a special signal mask to be used while executing in guest mode.  This
allows signals to be used to interrupt a vcpu without requiring signal
delivery to a userspace handler, which is quite expensive.  Userspace still
receives -EINTR and can get the signal via sigwait().
Signed-off-by: NAvi Kivity <avi@qumranet.com>