Conflicts:
	drivers/hid/hid-core.c

Conflicts:
	drivers/hid/hid-core.c

CONFIG_HID_WACOM must depend on CONFIG_LEDS_CLASS, otherwise
CONFIG_NEW_LEDS may be disabled.
Signed-off-by: NDavid Rientjes <rientjes@google.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Extend Waltop barrel button fix to all models: ignore reported pressure when a
barrel button is pressed, because it is rarely correct. Report zero pressure in
such cases instead.
Signed-off-by: NNikolai Kondrashov <spbnick@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Set the hid drvdata prior to invoking hid_add_device() as hid_add_device()
expects this state to be set. This bug was introduced in the recent hid
changes that were made in 07d9ab4f ("HID: hid-hyperv: Do not use
hid_parse_report() directly").
Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com>
Reviewed-by: NHaiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This patch unifies speed setting for both supported tablets. Functionality
of "wacom_poke" (used only by Graphire) is now in "wacom_set_features".
Reporting speed for both tablets can be changed by somethinkg like:

echo 1 > /sys/class/bluetooth/hci0/hci0:1/{device No}/speed

Accepted values:
0 - low speed,
1 - high speed.

The way of changing reporting speed is the same for Graphire and Intuos4 WL.
Signed-off-by: NPrzemo Firszt <przemo@firszt.eu>
Acked-by: NPing Cheng <pingc@wacom.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Add option to change reporting speed for Intuos4 WL. The option is only
internal to the module, but it will be extended to allow control over sysfs,
as it is already implemented for Graphire.
Signed-off-by: NPrzemo Firszt <przemo@firszt.eu>
Acked-by: NPing Cheng <pingc@wacom.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

That check is valid only for Wacom Graphire, as the device raports always
start with 0x03. Intuos4 WL high-speed raports begin with 0x04, so
the check would be filtering out valid reports.
Signed-off-by: NPrzemo Firszt <przemo@firszt.eu>
Acked-by: NPing Cheng <pingc@wacom.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Add support for UC-Logic Wireless Tablet TWHL850.
It is known to be sold as Genius MousePen M508W.

This tablet has a bug in the default (compatibility) mode which is used in this
driver: frame button assignments are mixed up. This is to be fixed with a driver
supporting the vendor-specific protocol.
Signed-off-by: NNikolai Kondrashov <spbnick@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Put a comment that clarifies the condition that handles both signed
and unsigned case for logical min/max in hid_add_field().
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

When logical maximum is 0xffffffff, the parser fails even if
logical minimum is more than 0.

By HID specification this is a valid combination.
Signed-off-by: Nsrinivas pandruvada <srinivas.pandruvada@intel.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

On big-endian systems (e.g., Apple PowerBook), trying to use a
logitech wireless mouse with the Logitech Unifying Receiver does not
work with v3.2 and later kernels.  The device doesn't show up in
/dev/input.  Older kernels work fine.

That is because the new hid-logitech-dj driver claims the device.  The
device arrival notification appears:

	20 00 41 02 00 00 00 00 00 00 00 00 00 00 00

and we read the report_types bitfield (02 00 00 00) to find out what
kind of device it is.  Unfortunately the driver only reads the first 8
bits and treats that value as a 32-bit little-endian number, so on a
powerpc the report type seems to be 0x02000000 and is not recognized.

Even on little-endian machines, connecting a media center remote
control (report type 00 01 00 00) with this driver loaded would
presumably fail for the same reason.

Fix both problems by using get_unaligned_le32() to read all four
bytes, which is a little clearer anyway.  After this change, the
wireless mouse works on Hugo's PowerBook again.

Based on a patch by Nestor Lopez Casado.
Addresses http://bugs.debian.org/671292Reported-by: NHugo Osvaldo Barrera <hugo@osvaldobarrera.com.ar>
Inspired-by: NNestor Lopez Casado <nlopezcasad@logitech.com>
Signed-off-by: NJonathan Nieder <jrnieder@gmail.com>
Signed-off-by: NNestor Lopez Casado <nlopezcasad@logitech.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Add sysfs attribute to control LED selector on Wacom Intuos4. There are 4
different LEDs on the tablet and they can be turned on by something like:

echo 50 > /sys/class/leds/(device # here)\:selector\:1/brightness

Only one can be lit at a time. The brightness range is 0 to 127. This patch
also contains short ABI description.
Signed-off-by: NPrzemo Firszt <przemo@firszt.eu>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

The previous implementation introduced a randomness in the splitting
of the different touches reported by the device. This version is more
robust as we don't rely on hi->input->absbit, but on our own structure.

This also prepares hid-multitouch to better support Win8 devices.

[Jiri Kosina <jkosina@suse.cz>: fix build]
Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@enac.fr>
Acked-by: NHenrik Rydberg <rydberg@euromail.se>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

We incorrectly parse incoming IR data. The extra byte contains the upper
bits and not the lower bits of the x/y coordinates. User-space expects
absolute position data from us so this patch does not break existing
applications. On the contrary, it extends the virtual view and fixes
garbage reports for margin areas of the virtual screen.

Cc: stable@kernel.org
Reported-by: NPeter Bukovsky <bukovsky.peter@gmail.com>
Signed-off-by: NDavid Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Tile is reported to input subsystem as reported by the device without
any modifications. It means that tilt X/Y range is 0 to 127 and it's
not centered on zero.
Signed-off-by: NPrzemo Firszt <przemo@firszt.eu>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Baanto device entry needs to be altered in the same way other device
entries have been changed in 2c2110e9 ("HID: hid-multitouch: Only match
MT interfaces").
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

I am merging multitouch branch into device-groups so that support
for Baanto device can be adjusted accordingly to the new autoloading
patches.
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

All known hid-multitouch devices currently match any device group.
However, some devices present interfaces belonging to different groups,
resulting in a race between the hid-generic and hid-multitouch modules.
This patch narrows the MT device list to match only HID_GROUP_MULTITOUCH,
which solves the problem.

As an exception, the USB_DEVICE_ID_CYPRESS_TRUETOUCH panel is not
modified, in order to suppress the unwanted extra interfaces of the
device.
Reported-by: NBenjamin Tissoires <benjamin.tissoires@gmail.com>
Signed-off-by: NHenrik Rydberg <rydberg@euromail.se>
Reviewed-by: NBenjamin Tissoires <benjamin.tissoires@enac.fr>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Move the hid drivers of the bus drivers to a common generic hid
driver, and make it a proper module. This ought to simplify device
handling moving forward.

Cc: Gustavo Padovan <gustavo@padovan.org>
Signed-off-by: NHenrik Rydberg <rydberg@euromail.se>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Switch the driver over to device group handling.  By adding the
HID_GROUP_MULTITOUCH group to hid-core, hid-generic will no longer
match multitouch devices.  By adding the HID_GROUP_MULTITOUCH entry to
the device list, hid-multitouch will match all unknown multitouch
devices, and udev will automatically load the module.

Since HID_QUIRK_MULTITOUCH never gets set, the special quirks handling
can be removed.  Since all HID MT devices have HID_DG_CONTACTID, they
can be removed from the hid_have_special_driver list.

With this patch, the unknown device ids are no longer NULL, so the code
is modified to check for the generic entry instead.
Signed-off-by: NHenrik Rydberg <rydberg@euromail.se>
Acked-by: NBenjamin Tissoires <benjamin.tissoires@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Devices that do not have a special driver are handled by the generic
driver. This patch does the same thing using device groups; Instead of
forcing a particular driver, the appropriate driver is picked up by
udev. As a consequence, one can now move a device from generic to
specific handling by a simple rebind. By adding a new device id to the
generic driver, the same thing can be done in reverse.
Signed-off-by: NHenrik Rydberg <rydberg@euromail.se>
Acked-by: NBenjamin Tissoires <benjamin.tissoires@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Most HID drivers do not need to know what bus driver is in use.
A generic group driver can drive any hid device, and the device
list should not need to be duplicated for each new bus.

This patch adds wildcard matching to the HID bus, simplifying device
list handling for group drivers.
Signed-off-by: NHenrik Rydberg <rydberg@euromail.se>
Acked-by: NBenjamin Tissoires <benjamin.tissoires@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

In order to allow the report descriptor to influence the hid device
properties, one needs to parse the descriptor early, without reference
to any driver. Scan the descriptor for group information during device
add, before the device has been broadcast to userland. The device
modalias will contain group information which can be used to
differentiate between modules. For starters, just handle the generic
group.
Signed-off-by: NHenrik Rydberg <rydberg@euromail.se>
Acked-by: NBenjamin Tissoires <benjamin.tissoires@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

HID devices are only partially presented to userland.  Hotplugged
devices emit events containing a modalias based on the basic bus,
vendor and product entities. However, in practise a hid device can
depend on details such as a single usb interface or a particular item
in a report descriptor.

This patch adds a device group to the hid device id, and broadcasts it
using uevent and the device modalias.  The module alias generation is
modified to match. As a consequence, a device with a non-zero group
will be processed by the corresponding group driver instead of by the
generic hid driver.
Signed-off-by: NHenrik Rydberg <rydberg@euromail.se>
Acked-by: NBenjamin Tissoires <benjamin.tissoires@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

The low-level driver can read the report descriptor, but it cannot
determine driver-specific changes to it. The hid core can fixup
and parse the report descriptor during driver attach, but does
not have direct access to the descriptor when doing so.

To be able to handle attach/detach of hid drivers properly,
a semantic change to hid_parse_report() is needed. This function has
been used in two ways, both as descriptor reader in the ll drivers and
as a parsor in the probe of the drivers. This patch splits the usage
by introducing hid_open_report(), and modifies the hid_parse() macro
to call hid_open_report() instead. The only usage of hid_parse_report()
is then to read and store the device descriptor. As a consequence, we
can handle the report fixups automatically inside the hid core.
Signed-off-by: NHenrik Rydberg <rydberg@euromail.se>
Tested-by: NNikolai Kondrashov <spbnick@gmail.com>
Tested-by: NBenjamin Tissoires <benjamin.tissoires@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

The current code allows several consecutive calls to hid_parse_report(),
which may have happened to work before, but would cause a memory leak
and generally be incorrect. This patch collects all the reports
before sending them once.

Cc: Nestor Lopez Casado <nlopezcasad@logitech.com>
Tested-by: Benjamin Tissoires <benjamin.tissoires@gmail.com
Signed-off-by: NHenrik Rydberg <rydberg@euromail.se>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Upcoming changes will split the semantics of hid_parse_report()
and hid_parse(), so make sure drivers use hid_parse() in probe().
Signed-off-by: NHenrik Rydberg <rydberg@euromail.se>
Acked-by: NK. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Commit b6787242 ("HID: hidraw: add proper error handling to raw event
reporting") forgot to update the static inline version of
hidraw_report_event() for the case when CONFIG_HIDRAW is unset. Fix that
up.
Reported-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

If kmemdup() in hidraw_report_event() fails, we are not propagating
this fact properly.

Let hidraw_report_event() and hid_report_raw_event() return an error
value to the caller.
Reported-by: NOliver Neukum <oneukum@suse.de>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Everytime a HID device is opened, a new hiddev_list is allocated with
kzalloc. This requires 64KB of physically contiguous memory, which could
easily push a heavily loaded system over the edge.

Allocating the same amount of memory with vmalloc shouldn't be nearly as
demanding, so let's do that instead. The memory isn't used for DMA and
doesn't look particularly performance sensitive, so this should be safe.
Signed-off-by: NHavard Skinnemoen <hskinnemoen@google.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

HID_BATTERY_STRENGTH is missing both help text and description text.
Reported-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

'out' label will be unused of CONFIG_LEDS_CLASS is unset.
Move it into conditional block.
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Updated comments to say that this driver now supports all Logitech
gaming wheels, and not just the WiiWheel.
Signed-off-by: NSimon Wood <simon@mungewell.org>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This patch adds supports for controlling the LED 'tachometer' on
the G27 wheel, via the LED subsystem.

The 5 LEDs are arranged from right (1=grn, 2=grn, 3=yel, 4=yel, 5=red)
and 'mirrored' to the left (10 LEDs in total).
Signed-off-by: NSimon Wood <simon@mungewell.org>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Signed-off-by: NAlexey Kaminsky <me@akaminsky.net>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Pull HID fixes from Jiri Kosina:
 "Fix for one particular device (bluetooth Tivo Slide) and change of
  'default y' -> 'default n' for CONFIG_HID_BATTERY_STRENGTH which I
  overlooked in the initial merge of the battery support"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  HID: default HID_BATTERY_STRENGTH to no
  HID: tivo: fix support for bluetooth version of tivo Slide

Pull m68k arch fixes from Greg Ungerer:
 "This contains four fixes for 3.4.  Two fix and clean up compilation
  for the nommu 68x328 CPU targets.  The other two fix the platform
  definition and multi-function pin setup of the second eth interface
  on the ColdFire 5275 SoC."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68knommu: make sure 2nd FEC eth interface pins are enabled on 5275 ColdFire
  m68knommu: fix id number for second eth device on 5275 ColdFire
  m68knommu: move and fix the 68VZ328 platform bootlogo.h
  m68knommu: remove the unused bootlogo.h processing for 68EZ328 and 68VZ328

Reported-by: NTvrtko Ursulin <tvrtko.ursulin@onelan.co.uk>
Tested-by: NTvrtko Ursulin <tvrtko.ursulin@onelan.co.uk>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>