- 19 1月, 2010 1 次提交
-
-
由 Mike Frysinger 提交于
This driver tweaks VR_CTL, so pull in the header for the bit defines. Also switch to the new define name as the old one has gone away. Signed-off-by: NMike Frysinger <vapier@gentoo.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 12月, 2009 1 次提交
-
-
由 Joe Perches 提交于
Only files where David Miller is the primary git-signer. wireless, wimax, ixgbe, etc are not modified. Compile tested x86 allyesconfig only Not all files compiled (not x86 compatible) Added a few > 80 column lines, which I ignored. Existing checkpatch complaints ignored. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 9月, 2009 1 次提交
-
-
由 Stephen Hemminger 提交于
No need to put ethtool_ops in data, they should be const. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 06 7月, 2009 1 次提交
-
-
由 Patrick McHardy 提交于
This patch is the result of an automatic spatch transformation to convert all ndo_start_xmit() return values of 0 to NETDEV_TX_OK. Some occurences are missed by the automatic conversion, those will be handled in a seperate patch. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 30 5月, 2009 4 次提交
-
-
由 Graf Yang 提交于
When we register the MII bus to the platfrom bus, the Distributed Switch Architecture can hook in transparently. Signed-off-by: NGraf Yang <graf.yang@analog.com> Signed-off-by: NMike Frysinger <vapier@gentoo.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Hennerich 提交于
- Remove dead long delay - Use proper defines - Remove broken implementation of the TX DMA Data Alignment TXDWA feature Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com> Signed-off-by: NMike Frysinger <vapier@gentoo.org> Signed-off-by: NBryan Wu <cooloney@kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sonic Zhang 提交于
Writes to the DMA descriptors may sit in the internal Blackfin data buffers and not actually be available when the DMA engine goes to fetch them. This does not typically happen, but when dealing with short/fast packets such as UDP and polling KGDB, this occurs much more frequently. Same goes for heavy loads as seen by netperf tests or large scp transfers. So force the buffers to drain with SSYNC otherwise we get random malformed packets. Signed-off-by: NSonic Zhang <sonic.zhang@analog.com> Signed-off-by: NMike Frysinger <vapier@gentoo.org> Signed-off-by: NBryan Wu <cooloney@kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Hennerich 提交于
The IRQ used by the Blackfin EMAC is internal to the peripheral and cannot be used to generate any other interrupt, so there is no point in marking it as IRQF_SHARED. Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com> Signed-off-by: NMike Frysinger <vapier@gentoo.org> Signed-off-by: NBryan Wu <cooloney@kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 27 5月, 2009 1 次提交
-
-
由 Mike Frysinger 提交于
The previous commit "convert to net_device_ops" broke the Blackfin MAC driver as it declared the new structure before the function it used: CC drivers/net/bfin_mac.o drivers/net/bfin_mac.c:984: error: ‘bfin_mac_close’ undeclared here (not in a function) make[1]: *** [drivers/net/bfin_mac.o] Error 1 Signed-off-by: NMike Frysinger <vapier@gentoo.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 15 4月, 2009 1 次提交
-
-
由 Alexander Beregalov 提交于
Signed-off-by: NAlexander Beregalov <a.beregalov@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 25 3月, 2009 1 次提交
-
-
由 Kay Sievers 提交于
Cc: davem@davemloft.net Cc: netdev@vger.kernel.org Acked-by: NGreg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NKay Sievers <kay.sievers@vrfy.org>
-
- 27 1月, 2009 1 次提交
-
-
由 Kay Sievers 提交于
Signed-off-by: NKay Sievers <kay.sievers@vrfy.org> Acked-by: NGreg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 11月, 2008 1 次提交
-
-
由 David S. Miller 提交于
The generic packet receive code takes care of setting netdev->last_rx when necessary, for the sake of the bonding ARP monitor. Drivers need not do it any more. Some cases had to be skipped over because the drivers were making use of the ->last_rx value themselves. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 13 10月, 2008 1 次提交
-
-
由 Adrian Bunk 提交于
Commit 2e888103 (phylib: add mdiobus_{read,write}) causes the following compile error: <-- snip --> ... CC drivers/net/bfin_mac.o drivers/net/bfin_mac.c:272: error: conflicting types for 'mdiobus_read' include/linux/phy.h:130: error: previous declaration of 'mdiobus_read' was here drivers/net/bfin_mac.c:287: error: conflicting types for 'mdiobus_write' include/linux/phy.h:131: error: previous declaration of 'mdiobus_write' was here make[3]: *** [drivers/net/bfin_mac.o] Error 1 <-- snip --> This patch prefixes the driver functions with bfin_ Signed-off-by: NAdrian Bunk <bunk@kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 09 10月, 2008 1 次提交
-
-
由 Lennert Buytenhek 提交于
This patch introduces mdiobus_alloc() and mdiobus_free(), and makes all mdio bus drivers use these functions to allocate their struct mii_bus'es dynamically. Signed-off-by: NLennert Buytenhek <buytenh@marvell.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net> Acked-by: NAndy Fleming <afleming@freescale.com>
-
- 25 9月, 2008 1 次提交
-
-
由 Harvey Harrison 提交于
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
- 30 7月, 2008 4 次提交
-
-
由 Stephen Hemminger 提交于
skb->dev is set by eth_type_trans already. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Michael Hennerich 提交于
Reprogram MAC address after resume from Suspend Mem (Blackfin Hibernate looses all CORE and SYSTEM register content) Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com> Signed-off-by: NBryan Wu <cooloney@kernel.org> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Bryan Wu 提交于
Signed-off-by: NBryan Wu <cooloney@kernel.org> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Mike Frysinger 提交于
Signed-off-by: NMike Frysinger <vapier.adi@gmail.com> Signed-off-by: NBryan Wu <cooloney@kernel.org> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
- 23 7月, 2008 1 次提交
-
-
由 Anton Vorontsov 提交于
The drivers were touching net queue before it has been started, so without this patch, the drivers will potentially WARN at net/core/dev.c:1328. I don't have the hardware for the drivers below, so this patch is untested, and thus should be carefully peer reviewed. tc35815.c au1000_eth.c bfin_mac.c macb.c ^ The four drivers are using phylib, they're calling netif_start_queue() in open() callback. So trivially remove netif_tx_schedule_all(). Phylib will handle netif_carrier_*(). cpmac.c fec_mpc52xx.c fs_enet/fs_enet-main.c sh_eth.c ^ The same as above, but these were also needlessly calling netif_carrier_*() functions. So removed queue calls and also remove carrier calls, since phylib will handle it. fs_enet-main.c also didn't call netif_start_queue() at open(), this is fixed now. Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 7月, 2008 1 次提交
-
-
由 David S. Miller 提交于
They logically all want to trigger a schedule for all device TX queues. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 22 5月, 2008 1 次提交
-
-
由 Huang Weiyi 提交于
Signed-off-by: NHuang Weiyi <weiyi.huang@gmail.com> Signed-off-by: NBryan Wu <cooloney@kernel.org> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
- 29 4月, 2008 2 次提交
-
-
由 Bryan Wu 提交于
Signed-off-by: NBryan Wu <cooloney@kernel.org> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Bryan Wu 提交于
- replace specific "bf537" function or data structure name to "bfin_mac" - cleanup bfin_mac_probe with error checking - punt set_pin_mux function, call peripheral request/free list functions directly Signed-off-by: NBryan Wu <cooloney@kernel.org> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
- 25 4月, 2008 1 次提交
-
-
由 Kay Sievers 提交于
Since 43cc71ee, the platform modalias is prefixed with "platform:". Add MODULE_ALIAS() to the hotpluggable network platform drivers, to re-enable auto loading. NOTE: didn't change drivers/net/fs_enet/fs_enet-main.c "old binding" support. That looks problematic in the first place (it even uses the ancient "struct device_driver" binding scheme for platform_bus!) and I suspect it will vanish soonish when arch/powerpc rules the world. Also, drivers/net/ne.c would have needed more thought to sort out. [akpm@linux-foundation.org: fix sgiseeq.c] [dbrownell@users.sourceforge.net: more drivers, registration fixes] Signed-off-by: NKay Sievers <kay.sievers@vrfy.org> Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Cc: Scott Wood <scottwood@freescale.com> Cc: Vitaly Bordug <vitb@kernel.crashing.org> Cc: Dale Farnsworth <dale@farnsworth.org> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Andrew Victor <andrew@sanpeople.com> Cc: Bryan Wu <bryan.wu@analog.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
- 17 4月, 2008 1 次提交
-
-
由 Andy Fleming 提交于
Having the id field be an int was making more complex bus topologies excessively difficult. For now, just convert it to a string, and change all instances of "bus->id = val" to snprintf(id, MII_BUS_ID_LEN, "%x", val). Signed-off-by: NAndy Fleming <afleming@freescale.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
- 29 3月, 2008 1 次提交
-
-
由 Mike Frysinger 提交于
Signed-off-by: NMike Frysinger <vapier.adi@gmail.com> Signed-off-by: NBryan Wu <cooloney@kernel.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 03 2月, 2008 8 次提交
-
-
由 Bryan Wu 提交于
Signed-off-by: NKalle Pokki <kalle.pokki@eke.com> Signed-off-by: NBryan Wu <bryan.wu@analog.com> Signed-off-by: NJeff Garzik <jeff@garzik.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexey Demin 提交于
It prevents overwritting new data from DMA. Signed-off-by: NAlexey Demin <bf53x@ya.ru> Signed-off-by: NBryan Wu <bryan.wu@analog.com> Signed-off-by: NJeff Garzik <jeff@garzik.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vitja Makarov 提交于
This patch puts phy in power-down mode when interface is down. Also we should think about energy detect power-down mode, that will decrease power consumption when no link. Signed-off-by: NVitja Makarov <vitja.makarov@gmail.com> Signed-off-by: NBryan Wu <bryan.wu@analog.com> Signed-off-by: NJeff Garzik <jeff@garzik.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Hennerich 提交于
Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com> Signed-off-by: NBryan Wu <bryan.wu@analog.com> Signed-off-by: NJeff Garzik <jeff@garzik.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mike Frysinger 提交于
EMAC driver: use simpler comment headers and strip out information that is maintained in the scm's log Signed-off-by: NMike Frysinger <michael.frysinger@analog.com> Signed-off-by: NBryan Wu <bryan.wu@analog.com> Signed-off-by: NJeff Garzik <jeff@garzik.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Aidan Williams 提交于
The bf537 Ethernet MAC driver in the 2007R1.1-RC3 kernel (and the current kernel) do not implement multicast hash filtering. This is a performance problem if you have lots of multicast on your network. This patch plugs the right bits into the multicast hash registers. Signed-off-by: NAidan Williams <aidan@nicta.com.au> Signed-off-by: NBryan Wu <bryan.wu@analog.com> Signed-off-by: NJeff Garzik <jeff@garzik.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Bryan Wu 提交于
Signed-off-by: NBryan Wu <bryan.wu@analog.com> Signed-off-by: NJeff Garzik <jeff@garzik.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Bryan Wu 提交于
Signed-off-by: NBryan Wu <bryan.wu@analog.com> Signed-off-by: NJeff Garzik <jeff@garzik.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 24 11月, 2007 1 次提交
-
-
由 Vitja Makarov 提交于
https://blackfin.uclinux.org/gf/project/uclinux-dist/forum/?action=ForumBrowse&forum_id=39&thread_id=23114&_forum_action=ForumMessageBrowse Today I was dealing with the same problem, on my custom bf537 board, and bfin_mac driver. I found that the problem is in setting ip_summed flag of skbuff structure, Signed-off-by: NVitja Makarov <vitja.makarov@gmail.com> Signed-off-by: NSonic Zhang <sonic.zhang@analog.com> Signed-off-by: NBryan Wu <bryan.wu@analog.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 15 11月, 2007 1 次提交
-
-
由 Mike Frysinger 提交于
Blackfin arch: change get_bf537_ether_addr() to bfin_get_ether_addr() since this is not BF537 specific and to better match other Blackfin-specific conventions Signed-off-by: NMike Frysinger <michael.frysinger@analog.com> Signed-off-by: NBryan Wu <bryan.wu@analog.com>
-
- 31 10月, 2007 1 次提交
-
-
由 Michael Hennerich 提交于
Fix Ethernet communication bug(dupliated and lost packets) in RMII PHY mode- dont call mac_disable and mac_enable during 10/100 REFCLK changes - mac_enable screws up the DMA descriptor chain Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com> Signed-off-by: NBryan Wu <bryan.wu@analog.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 11 10月, 2007 1 次提交
-
-
由 Bryan Wu 提交于
- add MDIO functions and register mdio bus - add phy abstraction layer (PAL) functions and use PAL API - test on STAMP537 board Signed-off-by: NBryan Wu <bryan.wu@analog.com> Acked-by: NJeff Garzik <jeff@garzik.org> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-