When ath6kl module was resumed while a scan was ongoing, for example during
suspend, the driver would crash in ar6k_cfg80211_scanComplete_event():

[26581.586440] Call Trace:
[26581.586440]  [<f99ffeda>] ? ar6k_cfg80211_scanComplete_event+0xaa/0xaa [ath6kl]
[26581.586440]  [<f9a0a020>] wmi_iterate_nodes+0xb/0xd [ath6kl]
[26581.586440]  [<f99ffe78>] ar6k_cfg80211_scanComplete_event+0x48/0xaa [ath6kl]
[26581.586440]  [<f9a038ae>] ar6000_close+0x77/0x7e [ath6kl]
[26581.586440]  [<c139c25d>] __dev_close_many+0x87/0xab
[26581.586440]  [<c139c30a>] dev_close_many+0x54/0xab
[26581.586440]  [<c139c437>] rollback_registered_many+0xa5/0x19e
[26581.586440]  [<c139c595>] rollback_registered+0x23/0x2f
[26581.586440]  [<c139c5ed>] unregister_netdevice_queue+0x4c/0x69
[26581.586440]  [<c139c6b2>] unregister_netdev+0x18/0x1f
[26581.586440]  [<f9a00d4c>] ar6000_destroy+0xf8/0x115 [ath6kl]
[26581.586440]  [<f9a0c765>] ar6k_cleanup_module+0x20/0x29 [ath6kl]
[26581.586440]  [<c1062843>] sys_delete_module+0x181/0x1d9
[26581.586440]  [<c105876b>] ? lock_release_holdtime+0x2b/0xcd
[26581.586440]  [<c10b55dc>] ? sys_munmap+0x3b/0x42
[26581.586440]  [<c14a99dc>] ? restore_all+0xf/0xf
[26581.586440]  [<c14aeb6c>] sysenter_do_call+0x12/0x32
[26581.586440] Code: 89 53 6c 75 07 89 d8 e8 c0 ff ff ff 89 f0 e8 2c f2 a9 c7 5b 5e 5d c3 55 89 e5 57 56 53 89 c3 83 ec 08 89 55 f0 8d 78 04 89 4d ec <8b> b0 b8 00 00 00 46 89 b0 b8 00 00 00 89 f8 e8 ae ed a9 c7 8b

Fix the function not to iterate nodes when the scan is aborted. The nodes
are already freed when the module is being unloaded. Patch "ath6kl: Fix a
kernel panic furing suspend/resume" tried to fix this already but it wasn't
enough as a pointer was still used even after the null check. This patch
removes the null check entirely as the wmi structure is not accessed anymore
during module unload.

Also fix a bug where the status was checked as a bitfield with '&' operator.
But it's not a bitfield, just a regular (enum like) value.
Signed-off-by: NKalle Valo <kvalo@qca.qualcomm.com>
Cc: stable <stable@kernel.org>  [3.0]
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Compile tested.
remove unnecessary code that matches this coccinelle pattern
	if (...)
		return ret;
	return ret;
Signed-off-by: NGreg Dietsche <Gregory.Dietsche@cuw.edu>
Acked-by: NFranky Lin <frankyl@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Change wl_cfg80211_suspend in fullmac to meet cfg80211 interface update.
Signed-off-by: NFranky Lin <frankyl@broadcom.com>
Reviewed-by: NRoland Vossen <rvossen@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Several source files in brcmsmac driver have checkpatch errors that
have been removed (see below).

ERROR: spaces required around that ':' (ctx:VxV)
+           (u8)NPHY_RSSI_SEL_TSSI_5G:(u8)NPHY_RSSI_SEL_TSSI_2G;
--
ERROR: code indent should use tabs where possible
+ ^Ierr = initvars_table(base, vp, vars, count);$
--
Signed-off-by: NArend van Spriel <arend@broadcom.com>
Reviewed-by: NRoland Vossen <rvossen@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The softmac source file main.c was passed through checkpatch to see
what issues against coding style are still present. This patch removes
the checkpatch errors listed below.

ERROR: trailing whitespace
+^Imemcpy(wlc->default_bss->rateset.rates, rs.rates, $
--
ERROR: spaces required around that ':' (ctx:VxV)
+       pval = arg ? (int *)arg:NULL;
--
Signed-off-by: NArend van Spriel <arend@broadcom.com>
Reviewed-by: NRoland Vossen <rvossen@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

A checkpatch run was done over the complete source files to determine
how much coding style issues there are in the driver. This patch fixes
the checkpatch errors in fullmac driver brcmfmac listed below.

ERROR: do not initialise globals to 0 or NULL
+uint dhd_poll = false;
--
ERROR: do not use assignment in if condition
+       if (!ifp && !(ifp = kmalloc(sizeof(dhd_if_t), GFP_ATOMIC))) {
--
ERROR: do not use assignment in if condition
+       if (unlikely(!(wl_cfg80211_dev &&                               \
--
ERROR: do not initialise statics to 0 or NULL
+       static bool iscan_pass_abort = false;
--
Signed-off-by: NArend van Spriel <arend@broadcom.com>
Reviewed-by: NRoland Vossen <rvossen@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Code cleanup. Function renaming. Triggered by feedback comment from John
Linville, just like the other function renames that preceded this patch.
Signed-off-by: NRoland Vossen <rvossen@broadcom.com>
Reviewed-by: NArend van Spriel <arend@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Code cleanup. Renamed functions.
Signed-off-by: NRoland Vossen <rvossen@broadcom.com>
Reviewed-by: NArend van Spriel <arend@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Code cleanup.
Signed-off-by: NRoland Vossen <rvossen@broadcom.com>
Reported-by: NJulian Calaby <julian.calaby@gmail.com>
Reviewed-by: NArend van Spriel <arend@broadcom.com>
Reviewed-by: NFranky Lin <frankyl@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Code cleanup.
Signed-off-by: NRoland Vossen <rvossen@broadcom.com>
Reviewed-by: NArend van Spriel <arend@broadcom.com>
Reviewed-by: NFranky Lin <frankyl@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Code cleanup.
Signed-off-by: NRoland Vossen <rvossen@broadcom.com>
Reviewed-by: NArend van Spriel <arend@broadcom.com>
Reviewed-by: NFranky Lin <frankyl@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Issue with disconnect at the time of suspend is fixed by properly setting
connection status bits maintained by brcmfmac driver.
Signed-off-by: NSukesh Srikakula <sukeshs@broadcom.com>
Reviewed-by: NRoland Vossen <rvossen@broadcom.com>
Reviewed-by: NArend van Spriel <arend@broadcom.com>
Reviewed-by: NFranky Lin <frankyl@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Code cleanup. Removed one redundant include and reshuffled #include order as
to include Linux header files first.
Reported-by: Njulie Sullivan <kernelmail.jms@gmail.com>
Signed-off-by: NRoland Vossen <rvossen@broadcom.com>
Reviewed-by: NFranky Lin <frankyl@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Two fields were not used in the driver code so they have been removed
from struct si_info definition.
Signed-off-by: NArend van Spriel <arend@broadcom.com>
Reviewed-by: NRoland Vossen <rvossen@broadcom.com>
Reviewed-by: NFranky Lin <frankyl@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The device id is passed to ai_attach() and subsequent functions
without actually being used. It can be removed.
Signed-off-by: NArend van Spriel <arend@broadcom.com>
Reviewed-by: NRoland Vossen <rvossen@broadcom.com>
Reviewed-by: NFranky Lin <frankyl@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The function wlc_tbtt() has variable regs as parameter, but it is
not used. Parameter has been removed from the function.
Signed-off-by: NArend van Spriel <arend@broadcom.com>
Reviewed-by: NRoland Vossen <rvossen@broadcom.com>
Reviewed-by: NFranky Lin <frankyl@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This variable was declared and initialized but never used so it has
been removed.
Signed-off-by: NArend van Spriel <arend@broadcom.com>
Reviewed-by: NRoland Vossen <rvossen@broadcom.com>
Reviewed-by: NFranky Lin <frankyl@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The function ai_ispcie() is a static function that is currently being
called from the c sources in the driver. Side-effect of the keyword
is that warning will suppressed when this function is no longer used.
As there is no assembly code using this function, the keyword is removed.
Signed-off-by: NArend van Spriel <arend@broadcom.com>
Reviewed-by: NFranky Lin <frankyl@broadcom.com>
Reviewed-by: NRoland Vossen <rvossen@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Remove this debug only variable in fullmace driver to avoid compile
warning when BCMDBG is off
Signed-off-by: NFranky Lin <frankyl@broadcom.com>
Reviewed-by: NRoland Vossen <rvossen@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Code cleanup. Number of includes has been reduced by only including what
is necessary.
Signed-off-by: NRoland Vossen <rvossen@broadcom.com>
Reviewed-by: NArend van Spriel <arend@broadcom.com>
Reviewed-by: NFranky Lin <frankyl@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Code cleanup. Moved softmac specific definitions into brcmsmac/types.h
Removed unused definitions.
Signed-off-by: NRoland Vossen <rvossen@broadcom.com>
Reviewed-by: NArend van Spriel <arend@broadcom.com>
Reviewed-by: NFranky Lin <frankyl@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Code cleanup. Moved the typedefs to brcmsmac/types.h for source files that
only require opaque pointer definitions. Next patches will decrease the
number of #includes for each file.
Signed-off-by: NRoland Vossen <rvossen@broadcom.com>
Reviewed-by: NArend van Spriel <arend@broadcom.com>
Reviewed-by: NFranky Lin <frankyl@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This was done to resolve the conflicts that were in a number of files
due to changes done upstream with others done in the staging-next
branch.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Right now, bad things happen if you try to build these drivers for the
PPC platform as it seems that the code only has been tested and built on
the MIPS big endian platform.

So disable it on the PPC32 and PPC64 platforms for now, hopefully this
will be resolved in the future as I'm sure someone will want to use
these chips with that platform someday.
Reported-by: NStephen Rothwell <sfr@canb.auug.org.au>
Cc: Henry Ptasinski <henryp@broadcom.com>
Cc: Brett Rudley <brudley@broadcom.com>
Cc: Roland Vossen <rvossen@broadcom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

* 'staging-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6:
  staging: iio: max517: Fix iio_info changes
  Staging: mei: fix debug code
  Staging: cx23885: fix include of altera.h
  staging: iio: error case memory leak fix
  staging: ath6kl: Fix a kernel panic during suspend/resume
  staging: gma500: get control from firmware framebuffer if conflicts
  staging: gma500: Skip bogus LVDS VBT mode and check for LVDS before adding backlight
  staging: usbip: bugfix prevent driver unbind
  staging: iio: industrialio-trigger: set iio_poll_func private_data
  staging: rts_pstor: use bitwise operator instead of logical one
  staging: fix ath6kl build when CFG80211 is not enabled
  staging: brcm80211: fix for 'multiple definition of wl_msg_level' build err
  staging: fix olpc_dcon build, needs BACKLIGHT_CLASS_DEVICE
  Staging: remove STAGING_EXCLUDE_BUILD option
  Staging: altera: move .h file to proper place

Merge branch 'stable/xen-swiotlb.bugfix' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb-2.6

* 'stable/xen-swiotlb.bugfix' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb-2.6:
  swiotlb: Export swioltb_nr_tbl and utilize it as appropiate.

Merge branch 'stable/broadcom.ibft-bugfixes' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/ibft-2.6

* 'stable/broadcom.ibft-bugfixes' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/ibft-2.6:
  iscsi_ibft: iscsi_ibft_find unused variable i

* 'unicore32' of git://git.kernel.org/pub/scm/linux/kernel/git/epip/linux-2.6-unicore32:
  unicore32: using generic-y format for one line asm-generic files
  unicore32: change PERCPU to PERCPU_SECTION
  unicore32: add KBUILD_DEFCONFIG with unicore32_defconfig (old debug_defconfig)
  unicore32: change zImage physical address, though it's PIC codes
  unicore32: move rtc-puv3.c to drivers/rtc directory

RFC 5952 (http://tools.ietf.org/html/rfc5952) mandates that 2 or more
consecutive 0's are required before using :: compression.

Update ip6_compressed_string to match the RFC and update the http
reference as well.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Unconditionally changing the address limit to USER_DS and not restoring
it to its old value in the error path is wrong because it prevents us
using kernel memory on repeated calls to this function.  This, in fact,
breaks the fallback of hard coded paths to the init program from being
ever successful if the first candidate fails to load.

With this patch applied switching to USER_DS is delayed until the point
of no return is reached which makes it possible to have a multi-arch
rootfs with one arch specific init binary for each of the (hard coded)
probed paths.

Since the address limit is already set to USER_DS when start_thread()
will be invoked, this redundancy can be safely removed.
Signed-off-by: NMathias Krause <minipli@googlemail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: stable@kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

On some arches the function virt_to_bus() wasn't being pulled in due to
include chains being different.  So, as we are explicitly calling this
function, explicitly include the proper header file so all will build
properly.
Reported-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Not all arches have PAGE_KERNEL_NOCACHE, so use the "normal" PAGE_KERNEL
on those that do not have it.
Reported-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

struct iio_info introduced a bug where the second channel of a MAX518 can't be
used. This commit fixes the typo (using max518 instead of the max517 struct).
Signed-off-by: NRoland Stigge <stigge@antcom.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

! has higher precedence than !=.  H_RDY is 8 and since neither 0 nor
1 are equal to 8 the original condition was always true.
Signed-off-by: NDan Carpenter <error27@gmail.com>
Acked-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

int i is only needed if CONFIG_ACPI is set
so move it within a new ifdef so kernels without ACPI
don't allocate space for nothing. Fixes warning too.
Signed-off-by: NConnor Hansen <cmdkhh@gmail.com>
Signed-off-by: NPeter Jones <pjones@redhat.com>
[v2: Fixed warning when CONFIG_ACPI was defined]
Signed-off-by: NKonrad Rzeszutek Wilk <konrad@kernel.org>

The patch adds one-line asm-generic files in arch/unicore32/include/asm/Kbuild
Also, remove the old implementation in arch/unicore32/Makefile
see commit from Sam Ravnborg <d8ecc5cd>
  kbuild: asm-generic support
Signed-off-by: NGuan Xuetao <gxt@mprc.pku.edu.cn>
Acked-by: NArnd Bergmann <arnd@arndb.de>

The patch changes PERCPU to PERCPU_SECTION
see commit from Tejun Heo <0415b00d>
  percpu: Always align percpu output section to PAGE_SIZE
Signed-off-by: NGuan Xuetao <gxt@mprc.pku.edu.cn>
Acked-by: NTejun Heo <tj@kernel.org>

Rename debug_defconfig to unicore32_defconfig, which is a minimal config for
PKUnity-v3 (130nm) SoC board.
Also, add KBUILD_DEFCONFIG to use 'make defconfig'.
Signed-off-by: NGuan Xuetao <gxt@mprc.pku.edu.cn>
Acked-by: NArnd Bergmann <arnd@arndb.de>

U-boot will load the kernel image to 48M physical memory address.
The patch changes it to the correct address, though it's PIC codes.
Signed-off-by: NGuan Xuetao <gxt@mprc.pku.edu.cn>
Acked-by: NArnd Bergmann <arnd@arndb.de>

The patch moves rtc driver for PKUnity-v3 SoC from arch/unicore32/kernel/
to drivers/rtc/, with renaming it to rtc-puv3.c.
Also, Kconfig, Makefile, and MAINTAINERS are modified correspondingly.
Signed-off-by: NGuan Xuetao <gxt@mprc.pku.edu.cn>
Acked-by: NArnd Bergmann <arnd@arndb.de>