- 20 6月, 2018 29 次提交
-
-
由 Willem de Bruijn 提交于
The ipcm(6)_cookie field gso_size is set only in the udp path. The ip layer copies this to cork only if sk_type is SOCK_DGRAM. This check proved too permissive. Ping and l2tp sockets have the same type. Limit to sockets of type SOCK_DGRAM and protocol IPPROTO_UDP to exclude ping sockets. v1 -> v2 - remove irrelevant whitespace changes Fixes: bec1f6f6 ("udp: generate gso with UDP_SEGMENT") Reported-by: NMaciej Żenczykowski <maze@google.com> Signed-off-by: NWillem de Bruijn <willemb@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Bhadram Varka 提交于
HW does not support Half-duplex mode in multi-queue scenario. Fix it by not advertising the Half-Duplex mode if multi-queue enabled. Signed-off-by: NBhadram Varka <vbhadram@nvidia.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dinh Nguyen 提交于
The Stratix10 platform has an additional reset line, OCP(Open Core Protocol), that also needs to get deasserted for the stmmac ethernet controller to work. Thus we need to update the Kconfig to include ARCH_STRATIX10 in order to build dwmac-socfpga. Also, remove the redundant check for the reset controller pointer. The reset driver already checks for the pointer and returns 0 if the pointer is NULL. Signed-off-by: NDinh Nguyen <dinguyen@kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
After commit 88078d98 ("net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends"), sungem owners reported the infamous "eth0: hw csum failure" message. CHECKSUM_COMPLETE has in fact never worked for this driver, but this was masked by the fact that upper stacks had to strip the FCS, and therefore skb->ip_summed was set back to CHECKSUM_NONE before my recent change. Driver configures a number of bytes to skip when the chip computes the checksum, and for some reason only half of the Ethernet header was skipped. Then a second problem is that we should strip the FCS by default, unless the driver is updated to eventually support NETIF_F_RXFCS in the future. Finally, a driver should check if NETIF_F_RXCSUM feature is enabled or not, so that the admin can turn off rx checksum if wanted. Many thanks to Andreas Schwab and Mathieu Malaterre for their help in debugging this issue. Signed-off-by: NEric Dumazet <edumazet@google.com> Reported-by: NMeelis Roos <mroos@linux.ee> Reported-by: NMathieu Malaterre <malat@debian.org> Reported-by: NAndreas Schwab <schwab@linux-m68k.org> Tested-by: NAndreas Schwab <schwab@linux-m68k.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matteo Croce 提交于
net/bpfilter/bpfilter_umh is a binary file generated when bpfilter is enabled, add it to .gitignore to avoid committing it. Fixes: d2ba09c1 ("net: add skeleton of bpfilter kernel module") Signed-off-by: NMatteo Croce <mcroce@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matteo Croce 提交于
bpfilter Makefile assumes that the system locale is en_US, and the parsing of objdump output fails. Set LC_ALL=C and, while at it, rewrite the objdump parsing so it spawns only 2 processes instead of 7. Fixes: d2ba09c1 ("net: add skeleton of bpfilter kernel module") Signed-off-by: NMatteo Croce <mcroce@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Daniel Lezcano 提交于
The code does: if (hrtimer_active(&t)) hrtimer_cancel(&t); However, hrtimer_cancel() checks if the timer is active, so the test above is pointless. Signed-off-by: NDaniel Lezcano <daniel.lezcano@linaro.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Davide Caratti 提交于
in the following script # tc actions add action ife encode allow prio pass index 42 # tc actions replace action ife encode allow tcindex drop index 42 the action control should remain equal to 'pass', if the kernel failed to replace the TC action. Pospone the assignment of the action control, to ensure it is not overwritten in the error path of tcf_ife_init(). Fixes: ef6980b6 ("introduce IFE action") Signed-off-by: NDavide Caratti <dcaratti@redhat.com> Acked-by: NCong Wang <xiyou.wangcong@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Davide Caratti 提交于
a recursive lock warning [1] can be observed with the following script, # $TC actions add action ife encode allow prio pass index 42 IFE type 0xED3E # $TC actions replace action ife encode allow tcindex pass index 42 in case the kernel was unable to run the last command (e.g. because of the impossibility to load 'act_meta_skbtcindex'). For a similar reason, the kernel can leak idr in the error path of tcf_ife_init(), because tcf_idr_release() is not called after successful idr reservation: # $TC actions add action ife encode allow tcindex index 47 IFE type 0xED3E RTNETLINK answers: No such file or directory We have an error talking to the kernel # $TC actions add action ife encode allow tcindex index 47 IFE type 0xED3E RTNETLINK answers: No space left on device We have an error talking to the kernel # $TC actions add action ife encode use mark 7 type 0xfefe pass index 47 IFE type 0xFEFE RTNETLINK answers: No space left on device We have an error talking to the kernel Since tcfa_lock is already taken when the action is being edited, a call to tcf_idr_release() wrongly makes tcf_idr_cleanup() take the same lock again. On the other hand, tcf_idr_release() needs to be called in the error path of tcf_ife_init(), to undo the last tcf_idr_create() invocation. Fix both problems in tcf_ife_init(). Since the cleanup() routine can now be called when ife->params is NULL, also add a NULL pointer check to avoid calling kfree_rcu(NULL, rcu). [1] ============================================ WARNING: possible recursive locking detected 4.17.0-rc4.kasan+ #417 Tainted: G E -------------------------------------------- tc/3932 is trying to acquire lock: 000000005097c9a6 (&(&p->tcfa_lock)->rlock){+...}, at: tcf_ife_cleanup+0x19/0x80 [act_ife] but task is already holding lock: 000000005097c9a6 (&(&p->tcfa_lock)->rlock){+...}, at: tcf_ife_init+0xf6d/0x13c0 [act_ife] other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&(&p->tcfa_lock)->rlock); lock(&(&p->tcfa_lock)->rlock); *** DEADLOCK *** May be due to missing lock nesting notation 2 locks held by tc/3932: #0: 000000007ca8e990 (rtnl_mutex){+.+.}, at: tcf_ife_init+0xf61/0x13c0 [act_ife] #1: 000000005097c9a6 (&(&p->tcfa_lock)->rlock){+...}, at: tcf_ife_init+0xf6d/0x13c0 [act_ife] stack backtrace: CPU: 3 PID: 3932 Comm: tc Tainted: G E 4.17.0-rc4.kasan+ #417 Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 Call Trace: dump_stack+0x9a/0xeb __lock_acquire+0xf43/0x34a0 ? debug_check_no_locks_freed+0x2b0/0x2b0 ? debug_check_no_locks_freed+0x2b0/0x2b0 ? debug_check_no_locks_freed+0x2b0/0x2b0 ? __mutex_lock+0x62f/0x1240 ? kvm_sched_clock_read+0x1a/0x30 ? sched_clock+0x5/0x10 ? sched_clock_cpu+0x18/0x170 ? find_held_lock+0x39/0x1d0 ? lock_acquire+0x10b/0x330 lock_acquire+0x10b/0x330 ? tcf_ife_cleanup+0x19/0x80 [act_ife] _raw_spin_lock_bh+0x38/0x70 ? tcf_ife_cleanup+0x19/0x80 [act_ife] tcf_ife_cleanup+0x19/0x80 [act_ife] __tcf_idr_release+0xff/0x350 tcf_ife_init+0xdde/0x13c0 [act_ife] ? ife_exit_net+0x290/0x290 [act_ife] ? __lock_is_held+0xb4/0x140 tcf_action_init_1+0x67b/0xad0 ? tcf_action_dump_old+0xa0/0xa0 ? sched_clock+0x5/0x10 ? sched_clock_cpu+0x18/0x170 ? kvm_sched_clock_read+0x1a/0x30 ? sched_clock+0x5/0x10 ? sched_clock_cpu+0x18/0x170 ? memset+0x1f/0x40 tcf_action_init+0x30f/0x590 ? tcf_action_init_1+0xad0/0xad0 ? memset+0x1f/0x40 tc_ctl_action+0x48e/0x5e0 ? mutex_lock_io_nested+0x1160/0x1160 ? tca_action_gd+0x990/0x990 ? sched_clock+0x5/0x10 ? find_held_lock+0x39/0x1d0 rtnetlink_rcv_msg+0x4da/0x990 ? validate_linkmsg+0x680/0x680 ? sched_clock_cpu+0x18/0x170 ? find_held_lock+0x39/0x1d0 netlink_rcv_skb+0x127/0x350 ? validate_linkmsg+0x680/0x680 ? netlink_ack+0x970/0x970 ? __kmalloc_node_track_caller+0x304/0x3a0 netlink_unicast+0x40f/0x5d0 ? netlink_attachskb+0x580/0x580 ? _copy_from_iter_full+0x187/0x760 ? import_iovec+0x90/0x390 netlink_sendmsg+0x67f/0xb50 ? netlink_unicast+0x5d0/0x5d0 ? copy_msghdr_from_user+0x206/0x340 ? netlink_unicast+0x5d0/0x5d0 sock_sendmsg+0xb3/0xf0 ___sys_sendmsg+0x60a/0x8b0 ? copy_msghdr_from_user+0x340/0x340 ? lock_downgrade+0x5e0/0x5e0 ? tty_write_lock+0x18/0x50 ? kvm_sched_clock_read+0x1a/0x30 ? sched_clock+0x5/0x10 ? sched_clock_cpu+0x18/0x170 ? find_held_lock+0x39/0x1d0 ? lock_downgrade+0x5e0/0x5e0 ? lock_acquire+0x10b/0x330 ? __audit_syscall_entry+0x316/0x690 ? current_kernel_time64+0x6b/0xd0 ? __fget_light+0x55/0x1f0 ? __sys_sendmsg+0xd2/0x170 __sys_sendmsg+0xd2/0x170 ? __ia32_sys_shutdown+0x70/0x70 ? syscall_trace_enter+0x57a/0xd60 ? rcu_read_lock_sched_held+0xdc/0x110 ? __bpf_trace_sys_enter+0x10/0x10 ? do_syscall_64+0x22/0x480 do_syscall_64+0xa5/0x480 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7fd646988ba0 RSP: 002b:00007fffc9fab3c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007fffc9fab4f0 RCX: 00007fd646988ba0 RDX: 0000000000000000 RSI: 00007fffc9fab440 RDI: 0000000000000003 RBP: 000000005b28c8b3 R08: 0000000000000002 R09: 0000000000000000 R10: 00007fffc9faae20 R11: 0000000000000246 R12: 0000000000000000 R13: 00007fffc9fab504 R14: 0000000000000001 R15: 000000000066c100 Fixes: 4e8c8615 ("net sched: net sched: ife action fix late binding") Fixes: ef6980b6 ("introduce IFE action") Signed-off-by: NDavide Caratti <dcaratti@redhat.com> Acked-by: NCong Wang <xiyou.wangcong@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Bartosz Golaszewski 提交于
This patch reverts commit 3243ff2a ("net: ethernet: davinci_emac: Deduplicate bus_find_device() by name matching") and adds a comment which should stop anyone from reintroducing the same "fix" in the future. We can't use bus_find_device_by_name() here because the device name is not guaranteed to be 'davinci_mdio'. On some systems it can be 'davinci_mdio.0' so we need to use strncmp() against the first part of the string to correctly match it. Fixes: 3243ff2a ("net: ethernet: davinci_emac: Deduplicate bus_find_device() by name matching") Cc: stable@vger.kernel.org Signed-off-by: NBartosz Golaszewski <bgolaszewski@baylibre.com> Acked-by: NLukas Wunner <lukas@wunner.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Li RongQing 提交于
if dev_get_valid_name failed, propagate its return code and remove the setting err to ENODEV, it will be set to 0 again before dev_change_net_namespace exits. Signed-off-by: NLi RongQing <lirongqing@baidu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
In failure path, we overwrite err to what vnic_rq_disable() returns. In case it returns 0, enic_open() returns success in case of error. Reported-by: NBen Hutchings <ben.hutchings@codethink.co.uk> Fixes: e8588e26 ("enic: enable rq before updating rq descriptors") Signed-off-by: NGovindarajulu Varadarajan <gvaradar@cisco.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Ahern 提交于
Similar to 69678bcd ("udp: fix SO_BINDTODEVICE"), TCP socket lookups need to fail if dev_match is not true. Currently, a packet to a given port can match a socket bound to device when it should not. In the VRF case, this causes the lookup to hit a VRF socket and not a global socket resulting in a response trying to go through the VRF when it should not. Fixes: 3fa6f616 ("net: ipv4: add second dif to inet socket lookups") Fixes: 4297a0ef ("net: ipv6: add second dif to inet6 socket lookups") Reported-by: NLou Berger <lberger@labn.net> Diagnosed-by: NRenato Westphal <renato@opensourcerouting.org> Tested-by: NRenato Westphal <renato@opensourcerouting.org> Signed-off-by: NDavid Ahern <dsahern@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnd Bergmann 提交于
getnstimeofday64() is deprecated and getting replaced throughout the kernel with ktime_get_*() based helpers for a more consistent interface. The two functions do the exact same thing, so this is just a cosmetic change. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NRichard Cochran <richardcochran@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
syzbot reported use after free that is caused by fib6_info being freed without a proper RCU grace period. CPU: 0 PID: 1407 Comm: udevd Not tainted 4.17.0+ #39 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1b9/0x294 lib/dump_stack.c:113 print_address_description+0x6c/0x20b mm/kasan/report.c:256 kasan_report_error mm/kasan/report.c:354 [inline] kasan_report.cold.7+0x242/0x2fe mm/kasan/report.c:412 __asan_report_load8_noabort+0x14/0x20 mm/kasan/report.c:433 __read_once_size include/linux/compiler.h:188 [inline] find_rr_leaf net/ipv6/route.c:705 [inline] rt6_select net/ipv6/route.c:761 [inline] fib6_table_lookup+0x12b7/0x14d0 net/ipv6/route.c:1823 ip6_pol_route+0x1c2/0x1020 net/ipv6/route.c:1856 ip6_pol_route_output+0x54/0x70 net/ipv6/route.c:2082 fib6_rule_lookup+0x211/0x6d0 net/ipv6/fib6_rules.c:122 ip6_route_output_flags+0x2c5/0x350 net/ipv6/route.c:2110 ip6_route_output include/net/ip6_route.h:82 [inline] icmpv6_xrlim_allow net/ipv6/icmp.c:211 [inline] icmp6_send+0x147c/0x2da0 net/ipv6/icmp.c:535 icmpv6_send+0x17a/0x300 net/ipv6/ip6_icmp.c:43 ip6_link_failure+0xa5/0x790 net/ipv6/route.c:2244 dst_link_failure include/net/dst.h:427 [inline] ndisc_error_report+0xd1/0x1c0 net/ipv6/ndisc.c:695 neigh_invalidate+0x246/0x550 net/core/neighbour.c:892 neigh_timer_handler+0xaf9/0xde0 net/core/neighbour.c:978 call_timer_fn+0x230/0x940 kernel/time/timer.c:1326 expire_timers kernel/time/timer.c:1363 [inline] __run_timers+0x79e/0xc50 kernel/time/timer.c:1666 run_timer_softirq+0x4c/0x70 kernel/time/timer.c:1692 __do_softirq+0x2e0/0xaf5 kernel/softirq.c:284 invoke_softirq kernel/softirq.c:364 [inline] irq_exit+0x1d1/0x200 kernel/softirq.c:404 exiting_irq arch/x86/include/asm/apic.h:527 [inline] smp_apic_timer_interrupt+0x17e/0x710 arch/x86/kernel/apic/apic.c:1052 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:863 </IRQ> RIP: 0010:strlen+0x5e/0xa0 lib/string.c:482 Code: 24 00 74 3b 48 bb 00 00 00 00 00 fc ff df 4c 89 e0 48 83 c0 01 48 89 c2 48 89 c1 48 c1 ea 03 83 e1 07 0f b6 14 1a 38 ca 7f 04 <84> d2 75 23 80 38 00 75 de 48 83 c4 08 4c 29 e0 5b 41 5c 5d c3 48 RSP: 0018:ffff8801af117850 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13 RAX: ffff880197f53bd0 RBX: dffffc0000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffffff81c5b06c RDI: ffff880197f53bc0 RBP: ffff8801af117868 R08: ffff88019a976540 R09: 0000000000000000 R10: ffff88019a976540 R11: 0000000000000000 R12: ffff880197f53bc0 R13: ffff880197f53bc0 R14: ffffffff899e4e90 R15: ffff8801d91c6a00 strlen include/linux/string.h:267 [inline] getname_kernel+0x24/0x370 fs/namei.c:218 open_exec+0x17/0x70 fs/exec.c:882 load_elf_binary+0x968/0x5610 fs/binfmt_elf.c:780 search_binary_handler+0x17d/0x570 fs/exec.c:1653 exec_binprm fs/exec.c:1695 [inline] __do_execve_file.isra.35+0x16fe/0x2710 fs/exec.c:1819 do_execveat_common fs/exec.c:1866 [inline] do_execve fs/exec.c:1883 [inline] __do_sys_execve fs/exec.c:1964 [inline] __se_sys_execve fs/exec.c:1959 [inline] __x64_sys_execve+0x8f/0xc0 fs/exec.c:1959 do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7f1576a46207 Code: 77 19 f4 48 89 d7 44 89 c0 0f 05 48 3d 00 f0 ff ff 76 e0 f7 d8 64 41 89 01 eb d8 f7 d8 64 41 89 01 eb df b8 3b 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 02 f3 c3 48 8b 15 00 8c 2d 00 f7 d8 64 89 02 RSP: 002b:00007ffff2784568 EFLAGS: 00000202 ORIG_RAX: 000000000000003b RAX: ffffffffffffffda RBX: 00000000ffffffff RCX: 00007f1576a46207 RDX: 0000000001215b10 RSI: 00007ffff2784660 RDI: 00007ffff2785670 RBP: 0000000000625500 R08: 000000000000589c R09: 000000000000589c R10: 0000000000000000 R11: 0000000000000202 R12: 0000000001215b10 R13: 0000000000000007 R14: 0000000001204250 R15: 0000000000000005 Allocated by task 12188: save_stack+0x43/0xd0 mm/kasan/kasan.c:448 set_track mm/kasan/kasan.c:460 [inline] kasan_kmalloc+0xc4/0xe0 mm/kasan/kasan.c:553 kmem_cache_alloc_trace+0x152/0x780 mm/slab.c:3620 kmalloc include/linux/slab.h:513 [inline] kzalloc include/linux/slab.h:706 [inline] fib6_info_alloc+0xbb/0x280 net/ipv6/ip6_fib.c:152 ip6_route_info_create+0x782/0x2b50 net/ipv6/route.c:3013 ip6_route_add+0x23/0xb0 net/ipv6/route.c:3154 ipv6_route_ioctl+0x5a5/0x760 net/ipv6/route.c:3660 inet6_ioctl+0x100/0x1f0 net/ipv6/af_inet6.c:546 sock_do_ioctl+0xe4/0x3e0 net/socket.c:973 sock_ioctl+0x30d/0x680 net/socket.c:1097 vfs_ioctl fs/ioctl.c:46 [inline] file_ioctl fs/ioctl.c:500 [inline] do_vfs_ioctl+0x1cf/0x16f0 fs/ioctl.c:684 ksys_ioctl+0xa9/0xd0 fs/ioctl.c:701 __do_sys_ioctl fs/ioctl.c:708 [inline] __se_sys_ioctl fs/ioctl.c:706 [inline] __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:706 do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 1402: save_stack+0x43/0xd0 mm/kasan/kasan.c:448 set_track mm/kasan/kasan.c:460 [inline] __kasan_slab_free+0x11a/0x170 mm/kasan/kasan.c:521 kasan_slab_free+0xe/0x10 mm/kasan/kasan.c:528 __cache_free mm/slab.c:3498 [inline] kfree+0xd9/0x260 mm/slab.c:3813 fib6_info_destroy+0x29b/0x350 net/ipv6/ip6_fib.c:207 fib6_info_release include/net/ip6_fib.h:286 [inline] __ip6_del_rt_siblings net/ipv6/route.c:3235 [inline] ip6_route_del+0x11c4/0x13b0 net/ipv6/route.c:3316 ipv6_route_ioctl+0x616/0x760 net/ipv6/route.c:3663 inet6_ioctl+0x100/0x1f0 net/ipv6/af_inet6.c:546 sock_do_ioctl+0xe4/0x3e0 net/socket.c:973 sock_ioctl+0x30d/0x680 net/socket.c:1097 vfs_ioctl fs/ioctl.c:46 [inline] file_ioctl fs/ioctl.c:500 [inline] do_vfs_ioctl+0x1cf/0x16f0 fs/ioctl.c:684 ksys_ioctl+0xa9/0xd0 fs/ioctl.c:701 __do_sys_ioctl fs/ioctl.c:708 [inline] __se_sys_ioctl fs/ioctl.c:706 [inline] __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:706 do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8801b5df2580 which belongs to the cache kmalloc-256 of size 256 The buggy address is located 8 bytes inside of 256-byte region [ffff8801b5df2580, ffff8801b5df2680) The buggy address belongs to the page: page:ffffea0006d77c80 count:1 mapcount:0 mapping:ffff8801da8007c0 index:0xffff8801b5df2e40 flags: 0x2fffc0000000100(slab) raw: 02fffc0000000100 ffffea0006c5cc48 ffffea0007363308 ffff8801da8007c0 raw: ffff8801b5df2e40 ffff8801b5df2080 0000000100000006 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8801b5df2480: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8801b5df2500: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc > ffff8801b5df2580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8801b5df2600: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8801b5df2680: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb Fixes: a64efe14 ("net/ipv6: introduce fib6_info struct and helpers") Signed-off-by: NEric Dumazet <edumazet@google.com> Cc: David Ahern <dsahern@gmail.com> Reported-by: syzbot+9e6d75e3edef427ee888@syzkaller.appspotmail.com Acked-by: NDavid Ahern <dsahern@gmail.com> Tested-by: NDavid Ahern <dsahern@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Liran Alon 提交于
Sync both unicast and multicast lists instead of unicast twice. Fixes: cfc80d9a ("net: Introduce net_failover driver") Reviewed-by: NJoao Martins <joao.m.martins@oracle.com> Signed-off-by: NLiran Alon <liran.alon@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Xin Long 提交于
Similar to the fixes on team and bonding, this restores the ability to set an ipvlan device's mtu to anything higher than 1500. Fixes: 91572088 ("net: use core MTU range checking in core net infra") Signed-off-by: NXin Long <lucien.xin@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stefan Agner 提交于
The array bpq_eth_addr is only used to get the size of an address, whereas the bcast_addr is used to set the broadcast address. This leads to a warning when using clang: drivers/net/hamradio/bpqether.c:94:13: warning: variable 'bpq_eth_addr' is not needed and will not be emitted [-Wunneeded-internal-declaration] static char bpq_eth_addr[6]; ^ Remove both variables and use the common eth_broadcast_addr to set the broadcast address. Signed-off-by: NStefan Agner <stefan@agner.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
lockdep spotted that we are using rfs_h.lock in enic_get_rxnfc() without initializing. rfs_h.lock is initialized in enic_open(). But ethtool_ops can be called when interface is down. Move enic_rfs_flw_tbl_init to enic_probe. INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. CPU: 18 PID: 1189 Comm: ethtool Not tainted 4.17.0-rc7-devel+ #27 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-20171110_100015-anatol 04/01/2014 Call Trace: dump_stack+0x85/0xc0 register_lock_class+0x550/0x560 ? __handle_mm_fault+0xa8b/0x1100 __lock_acquire+0x81/0x670 lock_acquire+0xb9/0x1e0 ? enic_get_rxnfc+0x139/0x2b0 [enic] _raw_spin_lock_bh+0x38/0x80 ? enic_get_rxnfc+0x139/0x2b0 [enic] enic_get_rxnfc+0x139/0x2b0 [enic] ethtool_get_rxnfc+0x8d/0x1c0 dev_ethtool+0x16c8/0x2400 ? __mutex_lock+0x64d/0xa00 ? dev_load+0x6a/0x150 dev_ioctl+0x253/0x4b0 sock_do_ioctl+0x9a/0x130 sock_ioctl+0x1af/0x350 do_vfs_ioctl+0x8e/0x670 ? syscall_trace_enter+0x1e2/0x380 ksys_ioctl+0x60/0x90 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x5a/0x170 entry_SYSCALL_64_after_hwframe+0x49/0xbe Signed-off-by: NGovindarajulu Varadarajan <gvaradar@cisco.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Joel Stanley says: ==================== Slience NCSI logging v2: Fix indent issue and commit message based on Joe's feedback Add Sam's acks Here are three changes to silence unnecessary warnings in the ncsi code. The final patch adds Sam as the maintainer for NCSI. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joel Stanley 提交于
Sam has been handing the maintenance of NCSI for a number release cycles now. Acked-by: NSamuel Mendoza-Jonas <sam@mendozajonas.com> Signed-off-by: NJoel Stanley <joel@jms.id.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joel Stanley 提交于
This moves all of the netdev_printk(KERN_DEBUG, ...) messages over to netdev_dbg. As Joe explains: > netdev_dbg is not included in object code unless > DEBUG is defined or CONFIG_DYNAMIC_DEBUG is set. > And then, it is not emitted into the log unless > DEBUG is set or this specific netdev_dbg is enabled > via the dynamic debug control file. Which is what we're after in this case. Acked-by: NSamuel Mendoza-Jonas <sam@mendozajonas.com> Signed-off-by: NJoel Stanley <joel@jms.id.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joel Stanley 提交于
This does not provide useful information. As the ncsi maintainer said: > either we get a channel or broadcom has gone out to lunch Acked-by: NSamuel Mendoza-Jonas <sam@mendozajonas.com> Signed-off-by: NJoel Stanley <joel@jms.id.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joel Stanley 提交于
In normal operation we see this series of messages as the host drives the network device: ftgmac100 1e660000.ethernet eth0: NCSI: LSC AEN - channel 0 state down ftgmac100 1e660000.ethernet eth0: NCSI: suspending channel 0 ftgmac100 1e660000.ethernet eth0: NCSI: configuring channel 0 ftgmac100 1e660000.ethernet eth0: NCSI: channel 0 link down after config ftgmac100 1e660000.ethernet eth0: NCSI interface down ftgmac100 1e660000.ethernet eth0: NCSI: LSC AEN - channel 0 state up ftgmac100 1e660000.ethernet eth0: NCSI: configuring channel 0 ftgmac100 1e660000.ethernet eth0: NCSI interface up ftgmac100 1e660000.ethernet eth0: NCSI: LSC AEN - channel 0 state down ftgmac100 1e660000.ethernet eth0: NCSI: suspending channel 0 ftgmac100 1e660000.ethernet eth0: NCSI: configuring channel 0 ftgmac100 1e660000.ethernet eth0: NCSI: channel 0 link down after config ftgmac100 1e660000.ethernet eth0: NCSI interface down ftgmac100 1e660000.ethernet eth0: NCSI: LSC AEN - channel 0 state up ftgmac100 1e660000.ethernet eth0: NCSI: configuring channel 0 ftgmac100 1e660000.ethernet eth0: NCSI interface up This makes all of these messages netdev_dbg. They are still useful to debug eg. misbehaving network device firmware, but we do not need them filling up the kernel logs in normal operation. Acked-by: NSamuel Mendoza-Jonas <sam@mendozajonas.com> Signed-off-by: NJoel Stanley <joel@jms.id.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Daniel Borkmann 提交于
Using skb_reserve(skb, I40E_SKB_PAD + (xdp->data - xdp->data_hard_start)) is clearly wrong since I40E_SKB_PAD already points to the offset where the original xdp->data was sitting since xdp->data_hard_start is defined as xdp->data - i40e_rx_offset(rx_ring) where latter offsets to I40E_SKB_PAD when build skb is used. However, also before cc5b114d ("bpf, i40e: add meta data support") this seems broken since bpf_xdp_adjust_head() helper could have been used to alter headroom and enlarge / shrink the frame and with that the assumption that the xdp->data remains unchanged does not hold and would push a bogus packet to upper stack. ixgbe got this right in 92470808 ("ixgbe: add XDP support for pass and drop actions"). In any case, fix it by removing the I40E_SKB_PAD from both skb_reserve() and truesize calculation. Fixes: cc5b114d ("bpf, i40e: add meta data support") Fixes: 0c8493d9 ("i40e: add XDP support for pass and drop actions") Reported-by: NKeith Busch <keith.busch@linux.intel.com> Reported-by: NToshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net> Cc: Björn Töpel <bjorn.topel@intel.com> Cc: John Fastabend <john.fastabend@gmail.com> Tested-by: NKeith Busch <keith.busch@linux.intel.com> Acked-by: NJohn Fastabend <john.fastabend@gmail.com> Acked-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Sudarsana Reddy Kalluru says: ==================== qed*: Fix series. The patch series fixes few issues in the qed/qede drivers. Please consider applying this series to "net". ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sudarsana Reddy Kalluru 提交于
Do not advertise DCBX_LLD_MANAGED capability i.e., do not allow external agent to manage the dcbx/lldp negotiation. MFW acts as lldp agent for qed* devices, and no other lldp agent is allowed to coexist with mfw. Also updated a debug print, to not to display the redundant info. Fixes: a1d8d8a5 ("qed: Add dcbnl support.") Signed-off-by: NSudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: NAriel Elior <ariel.elior@cavium.com> Signed-off-by: NMichal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sudarsana Reddy Kalluru 提交于
Avoid calling a SIMD fastpath handler if it is NULL. The check is needed to handle an unlikely scenario where unsolicited interrupt is destined to a PF in INTa mode. Fixes: fe56b9e6 ("qed: Add module with basic common support") Signed-off-by: NSudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: NAriel Elior <ariel.elior@cavium.com> Signed-off-by: NMichal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sudarsana Reddy Kalluru 提交于
Memory for packet buffers need to be freed in the error paths as there is no consumer (e.g., upper layer) for such packets and that memory will never get freed. The issue was uncovered when port was attacked with flood of isatap packets, these are multicast packets hence were directed at all the PFs. For foce PF, this meant they were routed to the ll2 module which in turn drops such packets. Fixes: 0a7fb11c ("qed: Add Light L2 support") Signed-off-by: NSudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: NAriel Elior <ariel.elior@cavium.com> Signed-off-by: NMichal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 6月, 2018 4 次提交
-
-
由 Konstantin Khlebnikov 提交于
When blackhole is used on top of classful qdisc like hfsc it breaks qlen and backlog counters because packets are disappear without notice. In HFSC non-zero qlen while all classes are inactive triggers warning: WARNING: ... at net/sched/sch_hfsc.c:1393 hfsc_dequeue+0xba4/0xe90 [sch_hfsc] and schedules watchdog work endlessly. This patch return __NET_XMIT_BYPASS in addition to NET_XMIT_SUCCESS, this flag tells upper layer: this packet is gone and isn't queued. Signed-off-by: NKonstantin Khlebnikov <khlebnikov@yandex-team.ru> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
This breaks the build as this header is not meant to be used in this way. ./include/linux/unaligned/access_ok.h:8:28: error: redefinition of ‘get_unaligned_le16’ static __always_inline u16 get_unaligned_le16(const void *p) ^~~~~~~~~~~~~~~~~~ In file included from drivers/bluetooth/hci_nokia.c:32: ./include/linux/unaligned/le_struct.h:7:19: note: previous definition of ‘get_unaligned_le16’ was here static inline u16 get_unaligned_le16(const void *p) Use asm/unaligned.h instead. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Woodhouse 提交于
ATM accounts for in-flight TX packets in sk_wmem_alloc of the VCC on which they are to be sent. But it doesn't take ownership of those packets from the sock (if any) which originally owned them. They should remain owned by their actual sender until they've left the box. There's a hack in pskb_expand_head() to avoid adjusting skb->truesize for certain skbs, precisely to avoid messing up sk_wmem_alloc accounting. Ideally that hack would cover the ATM use case too, but it doesn't — skbs which aren't owned by any sock, for example PPP control frames, still get their truesize adjusted when the low-level ATM driver adds headroom. This has always been an issue, it seems. The truesize of a packet increases, and sk_wmem_alloc on the VCC goes negative. But this wasn't for normal traffic, only for control frames. So I think we just got away with it, and we probably needed to send 2GiB of LCP echo frames before the misaccounting would ever have caused a problem and caused atm_may_send() to start refusing packets. Commit 14afee4b ("net: convert sock.sk_wmem_alloc from atomic_t to refcount_t") did exactly what it was intended to do, and turned this mostly-theoretical problem into a real one, causing PPPoATM to fail immediately as sk_wmem_alloc underflows and atm_may_send() *immediately* starts refusing to allow new packets. The least intrusive solution to this problem is to stash the value of skb->truesize that was accounted to the VCC, in a new member of the ATM_SKB(skb) structure. Then in atm_pop_raw() subtract precisely that value instead of the then-current value of skb->truesize. Fixes: 158f323b ("net: adjust skb->truesize in pskb_expand_head()") Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org> Tested-by: NKevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf由 David S. Miller 提交于
Daniel Borkmann says: ==================== pull-request: bpf 2018-06-16 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) Fix a panic in devmap handling in generic XDP where return type of __devmap_lookup_elem() got changed recently but generic XDP code missed the related update, from Toshiaki. 2) Fix a freeze when BPF progs are loaded that include BPF to BPF calls when JIT is enabled where we would later bail out via error path w/o dropping kallsyms, and another one to silence syzkaller splats from locking prog read-only, from Daniel. 3) Fix a bug in test_offloads.py BPF selftest which must not assume that the underlying system have no BPF progs loaded prior to test, and one in bpftool to fix accuracy of program load time, from Jakub. 4) Fix a bug in bpftool's probe for availability of the bpf(2) BPF_TASK_FD_QUERY subcommand, from Yonghong. 5) Fix a regression in AF_XDP's XDP_SKB receive path where queue id check got erroneously removed, from Björn. 6) Fix missing state cleanup in BPF's xfrm tunnel test, from William. 7) Check tunnel type more accurately in BPF's tunnel collect metadata kselftest, from Jian. 8) Fix missing Kconfig fragments for BPF kselftests, from Anders. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 16 6月, 2018 7 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs由 Linus Torvalds 提交于
Pull AFS updates from Al Viro: "Assorted AFS stuff - ended up in vfs.git since most of that consists of David's AFS-related followups to Christoph's procfs series" * 'afs-proc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: afs: Optimise callback breaking by not repeating volume lookup afs: Display manually added cells in dynamic root mount afs: Enable IPv6 DNS lookups afs: Show all of a server's addresses in /proc/fs/afs/servers afs: Handle CONFIG_PROC_FS=n proc: Make inline name size calculation automatic afs: Implement network namespacing afs: Mark afs_net::ws_cell as __rcu and set using rcu functions afs: Fix a Sparse warning in xdr_decode_AFSFetchStatus() proc: Add a way to make network proc files writable afs: Rearrange fs/afs/proc.c to remove remaining predeclarations. afs: Rearrange fs/afs/proc.c to move the show routines up afs: Rearrange fs/afs/proc.c by moving fops and open functions down afs: Move /proc management functions to the end of the file
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs由 Linus Torvalds 提交于
Pull compat updates from Al Viro: "Some biarch patches - getting rid of assorted (mis)uses of compat_alloc_user_space(). Not much in that area this cycle..." * 'work.compat' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: orangefs: simplify compat ioctl handling signalfd: lift sigmask copyin and size checks to callers of do_signalfd4() vmsplice(): lift importing iovec into vmsplice(2) and compat counterpart
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs由 Linus Torvalds 提交于
Pull aio fixes from Al Viro: "Assorted AIO followups and fixes" * 'work.aio' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: eventpoll: switch to ->poll_mask aio: only return events requested in poll_mask() for IOCB_CMD_POLL eventfd: only return events requested in poll_mask() aio: mark __aio_sigset::sigmask const
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: 1) Various netfilter fixlets from Pablo and the netfilter team. 2) Fix regression in IPVS caused by lack of PMTU exceptions on local routes in ipv6, from Julian Anastasov. 3) Check pskb_trim_rcsum for failure in DSA, from Zhouyang Jia. 4) Don't crash on poll in TLS, from Daniel Borkmann. 5) Revert SO_REUSE{ADDR,PORT} change, it regresses various things including Avahi mDNS. From Bart Van Assche. 6) Missing of_node_put in qcom/emac driver, from Yue Haibing. 7) We lack checking of the TCP checking in one special case during SYN receive, from Frank van der Linden. 8) Fix module init error paths of mac80211 hwsim, from Johannes Berg. 9) Handle 802.1ad properly in stmmac driver, from Elad Nachman. 10) Must grab HW caps before doing quirk checks in stmmac driver, from Jose Abreu. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (81 commits) net: stmmac: Run HWIF Quirks after getting HW caps neighbour: skip NTF_EXT_LEARNED entries during forced gc net: cxgb3: add error handling for sysfs_create_group tls: fix waitall behavior in tls_sw_recvmsg tls: fix use-after-free in tls_push_record l2tp: filter out non-PPP sessions in pppol2tp_tunnel_ioctl() l2tp: reject creation of non-PPP sessions on L2TPv2 tunnels mlxsw: spectrum_switchdev: Fix port_vlan refcounting mlxsw: spectrum_router: Align with new route replace logic mlxsw: spectrum_router: Allow appending to dev-only routes ipv6: Only emit append events for appended routes stmmac: added support for 802.1ad vlan stripping cfg80211: fix rcu in cfg80211_unregister_wdev mac80211: Move up init of TXQs mac80211_hwsim: fix module init error paths cfg80211: initialize sinfo in cfg80211_get_station nl80211: fix some kernel doc tag mistakes hv_netvsc: Fix the variable sizes in ipsecv2 and rsc offload rds: avoid unenecessary cong_update in loop transport l2tp: clean up stale tunnel or session in pppol2tp_connect's error path ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux由 Linus Torvalds 提交于
Pull module updates from Jessica Yu: "Minor code cleanup and also allow sig_enforce param to be shown in sysfs with CONFIG_MODULE_SIG_FORCE" * tag 'modules-for-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux: module: Allow to always show the status of modsign module: Do not access sig_enforce directly
-
git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml由 Linus Torvalds 提交于
Pull uml updates from Richard Weinberger: "Minor updates for UML: - fixes for our new vector network driver by Anton - initcall cleanup by Alexander - We have a new mailinglist, sourceforge.net sucks" * 'for-linus-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml: um: Fix raw interface options um: Fix initialization of vector queues um: remove uml initcalls um: Update mailing list address
-
由 Toshiaki Makita 提交于
Commit 67f29e07 ("bpf: devmap introduce dev_map_enqueue") changed the return value type of __devmap_lookup_elem() from struct net_device * to struct bpf_dtab_netdev * but forgot to modify generic XDP code accordingly. Thus generic XDP incorrectly used struct bpf_dtab_netdev where struct net_device is expected, then skb->dev was set to invalid value. v2: - Fix compiler warning without CONFIG_BPF_SYSCALL. Fixes: 67f29e07 ("bpf: devmap introduce dev_map_enqueue") Signed-off-by: NToshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Acked-by: NYonghong Song <yhs@fb.com> Acked-by: NJesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
-