This patch makes sure that QSFP+ modules use the SFP+ code path for
setting up link.
Signed-off-by: NEmil Tantilov <emil.s.tantilov@intel.com>
Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

This patch adds GB speed support for QSFP+ modules.
Autonegotiation is not supported with QSFP+. The user will have to set
the desired speed on both link partners using ethtool advertise setting.
Signed-off-by: NEmil Tantilov <emil.s.tantilov@intel.com>
Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

This patch fixes the read loop for the I2C data to account for the offset.

Also includes a whitespace cleanup and removes ret_val as it is not needed.

CC: Ben Hutchings <bhutchings@solarflare.com>
Reported-by: NBen Hutchings <bhutchings@solarflare.com>
Signed-off-by: NEmil Tantilov <emil.s.tantilov@intel.com>
Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com>
Reviewed-by: NBen Hutchings <bhutchings@solarflare.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Some minor log messages cleanup, changing the level one message is logged,
adding a bit of detail to another and put all the text on one line.
Signed-off-by: NDon Skidmore <donald.c.skidmore@intel.com>
Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

This patch initializes the msgbuf array to 0 in order to avoid using random
numbers from the memory as MAC address for the VF.
Signed-off-by: NEmil Tantilov <emil.s.tantilov@intel.com>
Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

This patch is a partial reverse of:
commit dfcc4615
Author: Jacob Keller <jacob.e.keller@intel.com>
Date: Thu Nov 8 07:07:08 2012 +0000

  ixgbe: ethtool ixgbe_diag_test cleanup

Specifically forcing the laser before the link check can lead to
inconsistent results because it does not guarantee that the link will be
negotiated correctly. Such is the case when dual speed SFP+ module is
connected to a gigabit link partner.
Signed-off-by: NEmil Tantilov <emil.s.tantilov@intel.com>
Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

We were transversing the tx_ring with IXGBE_NUM_RX_QUEUES.  Now this define
happens to have the correct value but this is misleading and a change later
could easily make this no longer true.  I updated it to netdev->num_tx_queues
like we use in ixgbe_get_strings().
Signed-off-by: NDon Skidmore <donald.c.skidmore@intel.com>
Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

This patch fixes the possible use of uninitialized memory by checking the
return value on eeprom reads. These issues were identified by static
analysis. In many cases error messages will be produced so that corrupted
eeprom issues will be more visible.
Signed-off-by: NMark Rustad <mark.d.rustad@intel.com>
Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

This patch fixes an issue with the 82599 adapter where it can potentially keep
link lights up when the adapter has gone down. The patch adds a function which
ensures link is disabled, and calls this function when the adapter transitions
to a down state.
Signed-off-by: NJacob Keller <jacob.e.keller@intel.com>
Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Included changes:
- set the protocol field in the skb structure according to the encapsulated
  payload
- make the gateway component send a uevent in case of "gw client mode"
  de-selection
- increment version number
- minor code rearrangement
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This function checks the upper bound but it doesn't check for negative
numbers:

	if (txq > QLCNIC_MAX_TX_RINGS) {

I've solved this by making "txq" a u32 type.  I chose that because
->tx_count in the ethtool_channels struct is a __u32.

This bug was added in aa4a1f7d ('qlcnic: Enable Tx queue changes using
ethtool for 82xx Series adapter.').
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Acked-by: NHimanshu Madhani <himanshu.madhani@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Wei Liu says:

====================
xen-netback: switch to NAPI + kthread 1:1 model

This series implements NAPI + kthread 1:1 model for Xen netback.

This model
 - provides better scheduling fairness among vifs
 - is prerequisite for implementing multiqueue for Xen network driver

The second patch has the real meat:
 - make use of NAPI to mitigate interrupt
 - kthreads are not bound to CPUs any more, so that we can take
   advantage of backend scheduler and trust it to do the right thing

Benchmark is done on a Dell T3400 workstation with 4 cores, running 4
DomUs. Netserver runs in Dom0. DomUs do netperf to Dom0 with
following command: /root/netperf -H Dom0 -fm -l120

IRQs are distributed to 4 cores by hand in the new model, while in the
old model vifs are automatically distributed to 4 kthreads.

* New model
%Cpu0  :  0.5 us, 20.3 sy,  0.0 ni, 28.9 id,  0.0 wa,  0.0 hi, 24.4 si, 25.9 st
%Cpu1  :  0.5 us, 17.8 sy,  0.0 ni, 28.8 id,  0.0 wa,  0.0 hi, 27.7 si, 25.1 st
%Cpu2  :  0.5 us, 18.8 sy,  0.0 ni, 30.7 id,  0.0 wa,  0.0 hi, 22.9 si, 27.1 st
%Cpu3  :  0.0 us, 20.1 sy,  0.0 ni, 30.4 id,  0.0 wa,  0.0 hi, 22.7 si, 26.8 st
Throughputs: 2027.89 2025.95 2018.57 2016.23 aggregated: 8088.64

* Old model
%Cpu0  :  0.5 us, 68.8 sy,  0.0 ni, 16.1 id,  0.5 wa,  0.0 hi,  2.8 si, 11.5 st
%Cpu1  :  0.4 us, 45.1 sy,  0.0 ni, 31.1 id,  0.4 wa,  0.0 hi,  2.1 si, 20.9 st
%Cpu2  :  0.9 us, 44.8 sy,  0.0 ni, 30.9 id,  0.0 wa,  0.0 hi,  1.3 si, 22.2 st
%Cpu3  :  0.8 us, 46.4 sy,  0.0 ni, 28.3 id,  1.3 wa,  0.0 hi,  2.1 si, 21.1 st
Throughputs: 1899.14 2280.43 1963.33 1893.47 aggregated: 8036.37

We can see that the impact is mainly on CPU usage. The new model moves
processing from kthread to NAPI (software interrupt).
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As we move to 1:1 model and melt xen_netbk and xenvif together, it would
be better to use single prefix for all functions in xen-netback.
Signed-off-by: NWei Liu <wei.liu2@citrix.com>
Acked-by: NIan Campbell <ian.campbell@citrix.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch implements 1:1 model netback. NAPI and kthread are utilized
to do the weight-lifting job:

- NAPI is used for guest side TX (host side RX)
- kthread is used for guest side RX (host side TX)

Xenvif and xen_netbk are made into one structure to reduce code size.

This model provides better scheduling fairness among vifs. It is also
prerequisite for implementing multiqueue for Xen netback.
Signed-off-by: NWei Liu <wei.liu2@citrix.com>
Acked-by: NIan Campbell <ian.campbell@citrix.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The data flow from DomU to DomU on the same host in current copying
scheme with tracking facility:

       copy
DomU --------> Dom0          DomU
 |                            ^
 |____________________________|
             copy

The page in Dom0 is a page with valid MFN. So we can always copy from
page Dom0, thus removing the need for a tracking facility.

       copy           copy
DomU --------> Dom0 -------> DomU

Simple iperf test shows no performance regression (obviously we copy
twice either way):

  W/  tracking: ~5.3Gb/s
  W/o tracking: ~5.4Gb/s
Signed-off-by: NWei Liu <wei.liu2@citrix.com>
Acked-by: NIan Campbell <ian.campbell@citrix.com>
Acked-by: NMatt Wilson <msw@amazon.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Whenever the GW client mode is deselected, a DEL event has
to be sent in order to tell userspace that the current
gateway has been lost. Send the uevent on state change only
if a gateway was currently selected.
Reported-by: NMarek Lindner <lindner_marek@yahoo.de>
Signed-off-by: NAntonio Quartulli <antonio@open-mesh.com>
Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de>

Signed-off-by: NSimon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: NAntonio Quartulli <ordex@autistici.org>

Signed-off-by: NAntonio Quartulli <ordex@autistici.org>

The skb priority field may help the wireless driver to choose the right
queue (e.g. WMM queues). This should be set in batman-adv, as this
information is only available here.

This patch adds support for IPv4/IPv6 DS fields and VLAN PCP. Note that
only VLAN PCP is used if a VLAN header is present. Also initially set
TC_PRIO_CONTROL only for self-generated packets, and keep the priority
set by higher layers.
Signed-off-by: NSimon Wunderlich <simon@open-mesh.com>
Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de>
Signed-off-by: NAntonio Quartulli <ordex@autistici.org>

Jesse Gross says:

====================
A number of significant new features and optimizations for net-next/3.12.
Highlights are:
 * "Megaflows", an optimization that allows userspace to specify which
   flow fields were used to compute the results of the flow lookup.
   This allows for a major reduction in flow setups (the major
   performance bottleneck in Open vSwitch) without reducing flexibility.
 * Converting netlink dump operations to use RCU, allowing for
   additional parallelism in userspace.
 * Matching and modifying SCTP protocol fields.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pablo Neira Ayuso says:

====================
The following patchset contains Netfilter updates for your net-next tree,
they are:

* The new SYNPROXY target for iptables, including IPv4 and IPv6 support,
  from Patrick McHardy.

* nf_defrag_ipv6.o should be only linked to nf_defrag_ipv6.ko, from
  Nathan Hintz.

* Fix an old bug in REJECT, which replies with wrong MAC source address
  from the bridge, by Phil Oester.

* Fix uninitialized helper variable in the expectation support over
  nfnetlink_queue, from Florian Westphal.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Ben Hutchings says:

====================
More refactoring and cleanup, particularly around filter management.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

net/netfilter/nf_conntrack_netlink.c: In function 'ctnetlink_nfqueue_attach_expect':
'helper' may be used uninitialized in this function

It was only initialized in if CTA_EXPECT_HELP_NAME attribute was
present, it must be NULL otherwise.

Problem added recently in bd077937
(netfilter: nfnetlink_queue: allow to attach expectations to conntracks).
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Add an IPv6 version of the SYNPROXY target. The main differences to the
IPv4 version is routing and IP header construction.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Tested-by: NMartin Topholm <mph@one.com>
Signed-off-by: NJesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Extract the local TCP stack independant parts of tcp_v6_init_sequence()
and cookie_v6_check() and export them for use by the upcoming IPv6 SYNPROXY
target.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Tested-by: NMartin Topholm <mph@one.com>
Signed-off-by: NJesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Add a SYNPROXY for netfilter. The code is split into two parts, the synproxy
core with common functions and an address family specific target.

The SYNPROXY receives the connection request from the client, responds with
a SYN/ACK containing a SYN cookie and announcing a zero window and checks
whether the final ACK from the client contains a valid cookie.

It then establishes a connection to the original destination and, if
successful, sends a window update to the client with the window size
announced by the server.

Support for timestamps, SACK, window scaling and MSS options can be
statically configured as target parameters if the features of the server
are known. If timestamps are used, the timestamp value sent back to
the client in the SYN/ACK will be different from the real timestamp of
the server. In order to now break PAWS, the timestamps are translated in
the direction server->client.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Tested-by: NMartin Topholm <mph@one.com>
Signed-off-by: NJesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Extract the local TCP stack independant parts of tcp_v4_init_sequence()
and cookie_v4_check() and export them for use by the upcoming SYNPROXY
target.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Tested-by: NMartin Topholm <mph@one.com>
Signed-off-by: NJesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Split out sequence number adjustments from NAT and move them to the conntrack
core to make them usable for SYN proxying. The sequence number adjustment
information is moved to a seperate extend. The extend is added to new
conntracks when a NAT mapping is set up for a connection using a helper.

As a side effect, this saves 24 bytes per connection with NAT in the common
case that a connection does not have a helper assigned.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Tested-by: NMartin Topholm <mph@one.com>
Signed-off-by: NJesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

'nf_defrag_ipv6' is built as a separate module; it shouldn't be
included in the 'nf_conntrack_ipv6' module as well.
Signed-off-by: NNathan Hintz <nlhintz@hotmail.com>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

As reported by Casper Gripenberg, in a bridged setup, using ip[6]t_REJECT
with the tcp-reset option sends out reset packets with the src MAC address
of the local bridge interface, instead of the MAC address of the intended
destination.  This causes some routers/firewalls to drop the reset packet
as it appears to be spoofed.  Fix this by bypassing ip[6]_local_out and
setting the MAC of the sender in the tcp reset packet.

This closes netfilter bugzilla #531.
Signed-off-by: NPhil Oester <kernel@linuxace.com>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

Make sure the sw_flow_key structure and valid mask boundaries are always
machine word aligned. Optimize the flow compare and mask operations
using machine word size operations. This patch improves throughput on
average by 15% when CPU is the bottleneck of forwarding packets.

This patch is inspired by ideas and code from a patch submitted by Peter
Klausler titled "replace memcmp() with specialized comparator".
However, The original patch only optimizes for architectures
support unaligned machine word access. This patch optimizes for all
architectures.
Signed-off-by: NAndy Zhou <azhou@nicira.com>
Signed-off-by: NJesse Gross <jesse@nicira.com>

Steven (cc-ed) noticed an imbalance in semaphore put/get for
82573-based NICs. Don't we need something like the following
(untested) patch?
Signed-off-by: NSteven La <sla@riverbed.com>
Acked-by: NArthur Kepner <akepner@riverbed.com>
Tested-by: NAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Updates the documentation to the Intel wired LAN drivers.
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Tested-by: NAaron Brown <aaron.f.brown@intel.com>
Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch updates the firmware to address the thermal notification issue
Signed-off-by: NRasesh Mody <rmody@brocade.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds support for virtual IOMMU to the vmxnet3 module.  We
switch to DMA consistent mappings for anything we pass to the device.
There were a few places where we already did this, but using pci_blah();
these have been fixed to use dma_blah(), along with all new occurrences
where we've replaced kmalloc() and friends.

Also fix two small bugs:
1) use after free of rq->buf_info in vmxnet3_rq_destroy()
2) a cpu_to_le32() that should have been a cpu_to_le64()
Acked-by: NGeorge Zhang <georgezhang@vmware.com>
Acked-by: NAditya Sarwade <asarwade@vmware.com>
Signed-off-by: NAndy King <acking@vmware.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Support is provided only for combined channels. When SR-IOV is not
enabled, BE3 supports upto 16 channels and Lancer-R/SH-R support upto
32 channels.
Signed-off-by: NSathya Perla <sathya.perla@emulex.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

1) Move be_cmd_if_create() above queue create routines to allow
   TXQ creation (that requires if_handle) to be clubbed with TX-CQ creation.
2) Consolidate all queue create routines into be_setup_queues()
Signed-off-by: NSathya Perla <sathya.perla@emulex.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently the IF_CREATE FW cmd is issued only *after* MCCQ is created as
it was coded to only use MCCQ. By fixing this, cmd_if_create() can be
called before MCCQ is created and the same routine for VF provisioning
can be called after.
This allows for consolidating all the queue create routines by moving
the be_cmd_if_create() call above all queue create calls in be_setup().
Signed-off-by: NSathya Perla <sathya.perla@emulex.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

1) use be_resources{} struct to query/store HW resource limits
2) The HW queue/resource limits for BE2/BE3 chips are mostly called out
   in driver as constants.  Code to handle this is scattered across various
   places in be_setup(). Consolidate this code into BEx_get_resources().
   For Lancer-R, Skyhawk-R, these limits are queried from FW.
Signed-off-by: NSathya Perla <sathya.perla@emulex.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

1) Parse PCIe descriptor for max-VFs supported by HW
2) Cleanup NIC descriptor parsing in get_func/profile_config() routines
3) Use common struct definitions for v0 and v1 versions of GET_FUNC_CONFIG
Signed-off-by: NVasundhara Volam <vasundhara.volam@emulex.com>
Signed-off-by: NSathya Perla <sathya.perla@emulex.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>