This patch add dvo detection for the Chrontel 7010B on some old hardware.

References: https://bugzilla.kernel.org/show_bug.cgi?id=55101
Signed-off-by: Braggle <braggle at free.fr>
[danvet: Fix up whitespace mangling.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Allows us to rip out a few fragile checks (which are duplicated in the
hw state readout now, too). Also prepares us a bit for more than one
panel/pfit.
Reviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

No more need to guard the write with a power well check on Haswell now
that we have proper pfit state readout: We can simply only clear the
pfit if it's actually on.

This removes some duplication of knowledge between the haswell pfit
disable and pfit state readout code about.

While at it extract a little helper for this.
Reviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Pfit state readout is a bit ugly on gen2/3 due to the intermingling
with the lvds state, but alas.

Also note that since state is always cleared to zero we can
unconditonally compare all the state and completely neglect the actual
platform we're running on.

v2: Properly check for the pfit power domain on haswell.

v3: Don't check pgm_ratios on gen4+, they're auto-computed by the hw.

v4: Properly clear the lvds border bits, upset the state checker a
bit.

v5: Unconditionally read out panel dither settings on gen2/3.
Reviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This should prevent mode set failures on LPT.
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: NDamien Lespiau <damien.lespiau@intel.com>
[danvet: Pimp the w/a tag to fit into Damien's new scheme.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

There was a race between Rodrigo writing those patches and me
formalizing the addition of platform tags. This patches fixes it.
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Somehow this has been forgotten in

commit 1974cad0
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Mon Nov 26 17:22:09 2012 +0100

    drm/i915: move is_dual_link_lvds to intel_lvds.c
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Up to now, we were using a static table to match the clock frequency
with a (r2,n2,p) triplet. Despite this table being big, it's by no mean
comprehensive and we had to fall back to the closest frequency when the
requested TMDS clock wasn't in the table.

This patch computes (r2,n2,p) dynamically and get rid of The Big Table.

v2: Replace the floating point constant 1e6 by 1000000

Bugzilla: http://bugs.freedesktop.org/show_bug.cgi?id=58497Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> (v1)
Tested-by: Paulo Zanoni <paulo.r.zanoni@intel.com> (v1)
[danvet: s/        /^T/]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Display register 46500h bit 23 must be set to 1b for the entire time that
Frame Buffer Compression is enabled.

v2: Ville suggested to enable it back when disabling fbc to avoid wasting
    power.

v3: RMW to preserve other bits (by Ville)
v4: Fix from Ville: sed &/| at RMW
v5: Too far on sed.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@gmail.com>
[danvet: Insert missing space that checkpatch spotted.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Display register 420B0h bit 22 must be set to 1b for the entire time that
Frame Buffer Compression is enabled.
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This patch introduce Frame Buffer Compression (FBC) support for HSW.
FBC is tied to primary plane A in HSW.

v2: Ville pointed out docs say FBC must be disabled before disabling
    the plane on HSW.
v3: Really enabling it by default at HSW.
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@gmail.com>
Tested-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Display register 42020h bit 9 must be set to 1b for the entire time that
Frame Buffer Compression is enabled.

v2: RMW to preserve other bits (by Ville)
v3: Fix from Ville: sed &/| at RMW
v4: Too far on sed.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Display register 42000h bit 22 must be set to 1b for the entire time that
Frame Buffer Compression is enabled.
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This patch introduce Frame Buffer Compression (FBC) support for IVB,
without enabling it by default.
It adds a new function gen7_enable_fbc to avoid getting
ironlake_enable_fbc messed with many IS_IVYBRIDGE checks.

v2: Fixes from Ville.
     	*  Fix Plane. FBC is tied to primary plane A in HSW
    	*  Fix DPFC initial write to avoid let trash on the register.
v3: Checking for bad plane on intel_update_fbc() as Chris suggested.
v4: Ville pointed out that according to BSpec FBC_CTL bits 0:3 must be 0.
v5: Up to v4 this work was entirely focused on Haswell. However Ville
    noticed I could reuse the FBC work done for HSW and get FBC for free
    at Ivybridge. So it makes more sense enable FBC for IVB first.
    FBC for HSW comming on next patches. We are just not enabling it by
    default on IVB.
v6: Fix confused commit name (by Matt Turner).
v7: Remove gtt_offset shift since it is page aligned byte offset (by Ville).

Cc: Matt Turner <mattst88@gmail.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

drm_i915_private is getting bigger and bigger when adding new vbt stuff.
So, the better way of getting drm_i915_private organized is to create
a special structure for vbt stuff.

v2: Basically conflicts fixes
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We need to track this correctly. While at it shovel the boolean
to track whether the sdvo is in tv mode or not into pipe_config.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=36997Tested-by: NPierre Assal <pierre.assal@verint.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=63609Tested-by: Ncancan,feng <cancan.feng@intel.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

More ugly stuff gone for good! The big special case left now is
lvds (which is indeed really special).
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This seems to be an impressive piece of copy&pasta lore. I've
checked all docs and on most platforms these bits are all MBZ, with
the exception of the SDVO pixel multiplier on gen3. On gen4 that
moved to a special DPLL_MD registers.

No indication whatsoever that we actually need this for native
TV-out support. I suspect this started as a hack when we didn't
yet have proper pixel multiplier support in place for SDVO TV, but
then got stuck in a life of its own.

Just rip it out.
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

TV-out uses the same reference clock as everyone else. The only
difference seems to be in the slightly different CB tuning limit.

Note that PLL_REF_INPUT_TVCLKINBC is a reserved value on ilk+. Also
strictly speaking we don't support native TV-out on ilk+, hence all
that code is dead. But Bspec still contains some residual mentions of
native TV-out on some pch-split platforms, so I've figured it doesn't
hurt to keep the code around a bit longer (e.g. in the cb tune
function).

v2: Improve the commit message as Jani suggested in his review.
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We have a very nice infrastructure for this now!

Note that the multifunction sdvo support is pretty neatly broken: We
completely ignore userspace's request for which connector to wire up
with the encoder and just use whatever the last detect callback has
seen.

Not something I'll fix in this patch, but unfortunately something
which is also broken in the DDI code ...

v2: Don't call sdvo_tv_clock twice.
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Signed-off-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

There are no more users for these, so remove them.
Signed-off-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

is_pch_edp() will be removed by the next patch, so replace it by a check
for the port and device type.
Signed-off-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

is_pch_edp() will be removed in a follow-up patch, so replace it
with a check for the port and VBT info (for port-D eDP).

Also make things a bit clearer by using a switch on the ports.

v2:
- make the comment about not setting the conder type for DP clearer
  (Ville)
Signed-off-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

On ILK-IVB the CPU side eDP is always on port-A.

Also reduce somewhat the debug verbosity.

v2:
- reduce debug verbosity
Signed-off-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

On HSW the CPU side eDP is always on port-A, the PCH side eDP is always
on port-D.
Signed-off-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Signed-off-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Works pretty well actually.
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

In some cases, we may not need GTT address space allocated to a stolen
object, so allow passing -1 to the preallocated function to indicate as
much.

v2: remove BUG_ON(gtt_offset & 4095) now that -1 is allowed (Ville)
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

But we need to get the right stolen base and make pre-allocated objects
for BIOS stuff so we don't clobber it.  If the BIOS hasn't allocated a
power context, we allocate one here too, from stolen space as required
by the docs.

v2: fix stolen to phys if ladder (Ben)
    keep BIOS reserved space out of allocator altogether (Ben)
v3: fix mask of stolen base (Ben)
v4: clean up preallocated object on unload (Ben)
    don't zero reg on unload (Jesse)
    fix mask harder (Jesse)
v5: use unref for freeing stolen bits (Chris)
    move alloc/free to intel_pm.c (Chris)
v6: NULL pctx at disable time so error paths work (Ben)
v7: use correct PCI device for config read (Jesse)
Reviewed-by: NBen Widawsky <benjamin.widawsky@intel.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

If the calculated FBC watermark is no good, we simply disable FBC
watermarks. But we fail to re-enable them later if the calculated
watermark becomes good again. Fix that, but remember to leave FBC
watermarks disabled on ILK since that's required by some workarounds.

v2: Fix checkpatch complaint
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

For the device to enter D3 we should enable PCH clock gating.

v2:
- use HAS_PCH_LPT instead of IS_HASWELL (Ville, Paolo)
- rename lpt_allow_clock_gating to lpt_suspend_hw (Paolo)
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

commit 142e2398
Author: Egbert Eich <eich@suse.de>
Date:   Thu Apr 11 15:57:57 2013 +0200

    drm/i915: Add bit field to record which pins have received HPD events (v3)

added a bit field for hotplug event tracking. There ended up being three
different v3 of the patch: [1], [2], and [3]. Apparently [1] was the
correct one, but some frankenstein combination of the three got
committed, which reversed the logic for setting the hotplug bits and
misplaced a continue statement, skipping the hotplug irq storm handling
altogether.

This lead to broken hotplug detection, bisected to
commit 321a1b30
Author: Egbert Eich <eich@suse.de>
Date:   Thu Apr 11 16:00:26 2013 +0200

    drm/i915: Only reprobe display on encoder which has received an HPD event (v2)

which uses the incorrectly set hotplug event bits.

Fix the mess.

[1] http://mid.gmane.org/1366112220-7638-6-git-send-email-eich@suse.de
[2] http://mid.gmane.org/1365688677-13682-1-git-send-email-eich@suse.de
[3] http://mid.gmane.org/1365688996-13874-1-git-send-email-eich@suse.deSigned-off-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We did not mention the workaround name when implementing those. This
should help us track what we already implement.
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We already have the same check on intel_enable_ddi. This patch
prevents "unclaimed register" messages when the power well is
disabled.

V2: Reset intel_crtc->eld_vld to false after the mode_set function.
V3: Add both "type != INTEL_OUTPUT_EDP" requested.
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This fixes "unclaimed register" messages when the power well is
disabled and there's a GPU hang.

v2: Use the new intel_display_power_enabled().
v3: Use the new domains for intel_display_power_enabled().
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

In the error state function we read the registers without checking if
the power well is on, so after doing this we have to clear the
FPGA_DBG_RM_NOCLAIM bit to prevent the next I915_WRITE from detecting
it and printing an error message.

The first version of this patch was checking for the power well state
and then avoiding reading registers that were off, but the reviewers
requested to just read the registers any way and then later clear the
FPGA_DBG_RM_NOCLAIM bit.
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We need to dump these registers if we want to properly interpret the
others.
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This should replace intel_using_power_well. The idea is that we're
adding the requested power domain as an argument, so this might enable
the code to look less platform-specific and also allows us to easily
add new domains in case we need.

v2: Add more domains to enum intel_display_power_domain
v3: Even more domains requested
Requested-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>