We need to make sure, that the clockevent devices are resumed, before
the tick is resumed. The current resume logic does not guarantee this.

Add CLOCK_EVT_MODE_RESUME and call the set mode functions of the clock
event devices before resuming the tick / oneshot functionality.

Fixup the existing users.

Thanks to Nigel Cunningham for tracking down a long standing thinko,
which affected the jinxed VAIO.

[akpm@linux-foundation.org: xen build fix]
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix following section mismatch warning:
WARNING: vmlinux.o(.text+0x121e62): Section mismatch: reference to .init.text:__alloc_bootmem (between 'vgacon_startup' and 'vgacon_scrolldelta')

Browsing the code it seems that vgacon_scrollback_startup() is only called
during the init phase so the reference to the .init.text section is OK.

Teach modpost not to warn using ___init_refok.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Acked-by: N"Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Flush workqueue before releasing bioset and mopools in dm-crypt.  There can
be finished but not yet released request.

Call chain causing oops:
  run workqueue
    dec_pending
      bio_endio(...);
      	<remove device request - remove mempool>
      mempool_free(io, cc->io_pool);

This usually happens when cryptsetup create temporary
luks mapping in the beggining of crypt device activation.

When dm-core calls destructor crypt_dtr, no new request
are possible.
Signed-off-by: NMilan Broz <mbroz@redhat.com>
Cc: Chuck Ebbert <cebbert@redhat.com>
Cc: Patrick McHardy <kaber@trash.net>
Acked-by: NAlasdair G Kergon <agk@redhat.com>
Cc: Christophe Saout <christophe@saout.de>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

__free_page() wants a struct page, not a virtual address.
Signed-off-by: NAvi Kivity <avi@qumranet.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The existing sparc64 mini_rtc driver can handle CMOS based
rtcs trivially with just a few lines of code and the simplifies
things tremendously.

Tested on SB1500.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The current scheme works on static interpretation of text names, which
is wrong.

The output-device setting, for example, must be resolved via an alias
or similar to a full path name to the console device.

Paths also contain an optional set of 'options', which starts with a
colon at the end of the path.  The option area is used to specify
which of two serial ports ('a' or 'b') the path refers to when a
device node drives multiple ports.  'a' is assumed if the option
specification is missing.

This was caught by the UltraSPARC-T1 simulator.  The 'output-device'
property was set to 'ttya' and we didn't pick upon the fact that this
is an OBP alias set to '/virtual-devices/console'.  Instead we saw it
as the first serial console device, instead of the hypervisor console.

The infrastructure is now there to take advantage of this to resolve
the console correctly even in multi-head situations in fbcon too.

Thanks to Greg Onufer for the bug report.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

State struct was never freed.
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

The drivers reads the PCI subsystem ID into its state structure, but it's
never used anywhere.
Signed-off-by: NTrent Piepho <xyzzy@speakeasy.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

The patch adds checking of kthread_run return code and issues a message
if it fails.
Signed-off-by: NCyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

If v4l2_ctrl_next is called without the V4L2_CTRL_FLAG_NEXT_CTRL then it 
should check whether the passed control ID is valid and return 0 if it 
isn't. Otherwise a for-loop over the control IDs will never end.
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

The VBI DMA is handled in a special way and is marked with a bit.
However, that bit was set at the wrong time and could be cleared
by mistake if a PCM (or other) DMA request would arrive before the
VBI DMA was completed. So on completion of the VBI DMA the driver
no longer knew that that DMA transfer was for VBI data. And this
in turn caused havoc with the card's DMA engine.
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Driver prints banner including kernel version. Was a leftover from when 
the driver was standalone.
Signed-off-by: NAlexey Dobriyan <adobriyan@sw.ru>
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

I2C_ALGOBIT must also be selected when ivtv is selected.
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Turn off debugging of API commands that occur during encoding or decoding,
unless they are explicitly requested.
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

Parse error in ifdef or bad use of macro.
Signed-off-by: NYoann Padioleau <padator@wanadoo.fr>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>

From: Maynard Johnson <mpjohn@us.ibm.com>

This patch updates the existing arch/powerpc/oprofile/op_model_cell.c
to add in the SPU profiling capabilities.  In addition, a 'cell' subdirectory
was added to arch/powerpc/oprofile to hold Cell-specific SPU profiling code.
Exports spu_set_profile_private_kref and spu_get_profile_private_kref which
are used by OProfile to store private profile information in spufs data
structures.

Also incorporated several fixes from other patches (rrn).  Check pointer
returned from kzalloc.  Eliminated unnecessary cast.  Better error
handling and cleanup in the related area.  64-bit unsigned long parameter
was being demoted to 32-bit unsigned int and eventually promoted back to
unsigned long.
Signed-off-by: NCarl Love <carll@us.ibm.com>
Signed-off-by: NMaynard Johnson <mpjohn@us.ibm.com>
Signed-off-by: NBob Nelson <rrnelson@us.ibm.com>
Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com>
Acked-by: NPaul Mackerras <paulus@samba.org>

The same problem that was fixed for tpm_ascii_bios_measurements_open()
in commit 178554ae also occurs in
tpm_binary_bios measurements().  Thanks for noticing this Satyam!

I tested the attached patch to fix tpm_binary_bios_measurments as well.
Signed-off-by: NReiner Sailer <sailer@watson.ibm.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This is a merge of Peter Keilty's initial patch (which was
revived by Bob Picco) for this with Hidetoshi Seto's fixes
and scaling improvements.
Acked-by: NBob Picco <bob.picco@hp.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

The kvm mmu uses page->private on shadow page tables; so does slub, and
an oops result.  Fix by allocating regular pages for shadows instead of
using slub.
Tested-by: NS.Çağlar Onur <caglar@pardus.org.tr>
Signed-off-by: NAvi Kivity <avi@qumranet.com>

Allow real-mode emulation of rdmsr and wrmsr.  This allows smp Windows to
boot, presumably for its sipi trampoline.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

The memory slot management functions were oriented against vcpu 0, where
they should be kvm-wide.  This causes hangs starting X on guest smp.

Fix by making the functions (and resultant tail in the mmu) non-vcpu-specific.
Unfortunately this reduces the efficiency of the mmu object cache a bit.  We
may have to revisit this later.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

We need to distinguish between large page shadows which have the nx bit set
and those which don't.  The problem shows up when booting a newer smp Linux
kernel, where the trampoline page (which is in real mode, which uses the
same shadow pages as large pages) is using the same mapping as a kernel data
page, which is mapped using nx, causing kvm to spin on that page.
Signed-off-by: NAvi Kivity <avi@qumranet.com>

The controller has a bit indicating that one of the higher bits (the
error bits) are set. A previous bug caused this bit to be masked, but
since that bug has been fixed we have to clear it explicictly.
Signed-off-by: NPierre Ossman <drzeus@drzeus.cx>

This piece of code enable the system to be wake-up by a card insertion or removal.
Signed-off-by: NMarc Pignat <marc.pignat@hevs.ch>
Signed-off-by: NNicolas Ferre <nicolas.ferre@rfo.atmel.com>
Signed-off-by: NPierre Ossman <drzeus@drzeus.cx>

Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinux Torvalds <torvalds@linux-foundation.org>

Guests currently use the default scheduler clock: this means they
always use jiffies even if TSC is actually available.  It doesn't make
any noticeable difference here, but it's a better thing to do.

Also remove commented-out asm/sched-clock.h from -mm tree.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The sense of the IF bit is backwards in the host interrupt handling.

This means we always save "IF=1" on the stack when injecting an
interrupt.  It turns out this is almost always correct (unless the
guest is taking a page fault in an interrupt due to an unpopulated
vmalloc mapping), so went unnoticed.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Coverity found a memory leak in tpm_ascii_bios_measurements_open().

If "read_log(log)" fails, then we may leak 'log' and
'log->bios_event_log'.
Signed-off-by: NJesper Juhl <jesper.juhl@gmail.com>
Cc: Seiji Munetoh <munetoh@jp.ibm.com>
Cc: Stefan Berger <stefanb@us.ibm.com>
Cc: Reiner Sailer <sailer@watson.ibm.com>
Cc: Kylene Hall <kjhall@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>