Signed-off-by: NJesper Nilsson <jesper.nilsson@axis.com>

Depending on eth, eth_mido and geth fields in wr_hwprot, don't set
corresponding pins on gpio port b to gpio mode. This avoids
re-resetting the ethernet PHY should this already have been done.
Signed-off-by: NJesper Nilsson <jesper.nilsson@axis.com>

Signed-off-by: NJesper Nilsson <jesper.nilsson@axis.com>

Signed-off-by: NJesper Nilsson <jesper.nilsson@axis.com>

Signed-off-by: NJesper Nilsson <jesper.nilsson@axis.com>

Move the old one to mach-fs and replace with a new one that
only include the correct one for the machine architecture.
Signed-off-by: NJesper Nilsson <jesper.nilsson@axis.com>

Signed-off-by: NJesper Nilsson <jesper.nilsson@axis.com>

Move the old one to mach-fs and replace with a new one that
only include the correct one for the machine architecture.
Signed-off-by: NJesper Nilsson <jesper.nilsson@axis.com>

Signed-off-by: NJesper Nilsson <jesper.nilsson@axis.com>

Signed-off-by: NJesper Nilsson <jesper.nilsson@axis.com>

Rename to aputs.
Also, simplify code by moving some common code out to macros.
Signed-off-by: NJesper Nilsson <jesper.nilsson@axis.com>

Signed-off-by: NJesper Nilsson <jesper.nilsson@axis.com>

Signed-off-by: NJesper Nilsson <jesper.nilsson@axis.com>

Also, make DDR latency configurable.
Signed-off-by: NJesper Nilsson <jesper.nilsson@axis.com>

Signed-off-by: NJesper Nilsson <jesper.nilsson@axis.com>

Signed-off-by: NJesper Nilsson <jesper.nilsson@axis.com>

Signed-off-by: NJesper Nilsson <jesper.nilsson@axis.com>

Signed-off-by: NJesper Nilsson <jesper.nilsson@axis.com>

Register number was incorrect in syscalls
that go via the restartblock (e.g, poll).
Signed-off-by: NEdgar Iglesias <Edgar.Iglesias@axis.com>
Signed-off-by: NJesper Nilsson <jesper.nilsson@axis.com>

Add standard i2d-devices.
Signed-off-by: NJesper Nilsson <jesper.nilsson@axis.com>

Signed-off-by: NJesper Nilsson <jesper.nilsson@axis.com>

Paths were not correct and pack_hex_byte() takes two arguments.
Signed-off-by: NJesper Nilsson <jesper.nilsson@axis.com>

Signed-off-by: NJesper Nilsson <jesper.nilsson@axis.com>

Signed-off-by: NJesper Nilsson <jesper.nilsson@axis.com>

Is after __bss_start, not __vmlinux_end
Signed-off-by: NJesper Nilsson <jesper.nilsson@axis.com>

Signed-off-by: NJesper Nilsson <jesper.nilsson@axis.com>

Signed-off-by: NEdgar Iglesias <Edgar.Iglesias@axis.com>
Signed-off-by: NJesper Nilsson <jesper.nilsson@axis.com>

Brings down the CPI from ~1.5 to ~1.1.
Signed-off-by: NEdgar Iglesias <Edgar.Iglesias@axis.com>
Signed-off-by: NJesper Nilsson <jesper.nilsson@axis.com>

Signed-off-by: NEdgar Iglesias <Edgar.Iglesias@axis.com>
Signed-off-by: NJesper Nilsson <jesper.nilsson@axis.com>

The romfs should land after __init_end
Signed-off-by: NJesper Nilsson <jesper.nilsson@axis.com>

Signed-off-by: NJesper Nilsson <jesper.nilsson@axis.com>

Signed-off-by: NJesper Nilsson <jesper.nilsson@axis.com>

Signed-off-by: NJesper Nilsson <jesper.nilsson@axis.com>

We don't need to take the BKL here.
Also fixes compile error after last commit (smp_lock.h was not included)
Signed-off-by: NJesper Nilsson <jesper.nilsson@axis.com>

copy_to_user()/copy_from_user() must not be used with spinlocks held.
Move locks inside each case so we have better control of when the locks
are held.

Also, since we use spinlocks, we don't need to hold the BKL, so remove it.
Reported-by: NKulikov Vasiliy <segooon@gmail.com>
Signed-off-by: NJesper Nilsson <jesper.nilsson@axis.com>

Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NJesper Nilsson <jesper.nilsson@axis.com>

All these files use the big kernel lock in a trivial
way to serialize their private file operations,
typically resulting from an earlier semi-automatic
pushdown from VFS.

None of these drivers appears to want to lock against
other code, and they all use the BKL as the top-level
lock in their file operations, meaning that there
is no lock-order inversion problem.

Consequently, we can remove the BKL completely,
replacing it with a per-file mutex in every case.
Using a scripted approach means we can avoid
typos.

file=$1
name=$2
if grep -q lock_kernel ${file} ; then
    if grep -q 'include.*linux.mutex.h' ${file} ; then
            sed -i '/include.*<linux\/smp_lock.h>/d' ${file}
    else
            sed -i 's/include.*<linux\/smp_lock.h>.*$/include <linux\/mutex.h>/g' ${file}
    fi
    sed -i ${file} \
        -e "/^#include.*linux.mutex.h/,$ {
                1,/^\(static\|int\|long\)/ {
                     /^\(static\|int\|long\)/istatic DEFINE_MUTEX(${name}_mutex);

} }"  \
    -e "s/\(un\)*lock_kernel\>[ ]*()/mutex_\1lock(\&${name}_mutex)/g" \
    -e '/[      ]*cycle_kernel_lock();/d'
else
    sed -i -e '/include.*\<smp_lock.h\>/d' ${file}  \
                -e '/cycle_kernel_lock()/d'
fi
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NJesper Nilsson <jesper.nilsson@axis.com>

From: Frederic Weisbecker <fweisbec@gmail.com>

Pushdown the bkl to the remaining drivers using the
deprecated .ioctl.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NJesper Nilsson <jesper.nilsson@axis.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Kacur <jkacur@redhat.com>

As explained in commit 1c0fe6e3, we want to call the architecture independent
oom killer when getting an unexplained OOM from handle_mm_fault, rather than
simply killing current.
Signed-off-by: NNick Piggin <npiggin@suse.de>
Acked-by: NDavid Rientjes <rientjes@google.com>
Signed-off-by: NJesper Nilsson <jesper.nilsson@axis.com>
Signed-off-by: NMikael Starvik <starvik@axis.com>

GENERIC_TIME was not functional for CRIS, giving random backward
time jumps.

For CRISv32 implement a new clocksource using the free running counter
and ditch the arch_gettimeoffset.

The random time jumps still existed, but turned out to be the write_seqlock
which was missing around our do_timer() call.

So switch over to GENERIC_TIME using the clocksource for CRISv32.

CRISv10 doesn't have the free running counter needed for the
clocksource trick, but we can still use GENERIC_TIME with
arch_gettimeoffset.

Unfortunately, there were problems in using the prescaler register
to timer0 for the gettimeoffset calculation, so it is now ignored,
making our resolution worse by the tune of 40usec (0.4%) worst case.

At the same time, clean up some formatting and use NSEC_PER_SEC
instead of 1000000000.
Signed-off-by: NJesper Nilsson <jesper.nilsson@axis.com>