- 14 11月, 2009 8 次提交
-
-
由 Alexander Duyck 提交于
This patch removes unused variables total_tx_bytes, total_tx_packets, total_rx_bytes, and total_rx_packets from the adapter struct. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
This patch does some refactoring work that I felt was needed after reviewing the changes recently submitted relating to the replacement of net_stats with netdev->stats. This patch essentially creates two different collections of stats. The first handles the adapter specific states and is stored in gstring_stats, and the second is for netdev specific stats and is stored in gstring_net_stats. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
This patch makes it so that nics such as 82576 and newer can support more hardware queues when there are more than 4 cpus by combining a tx/rx queue pair onto one interrupt so that 8 queue pairs can be supported and thus allow for more queues. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
Current code is quite large and making igb_probe difficult to read. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
Change the type for the ring size values to u16 and use min/max_t instead of min/max. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wan ZongShun 提交于
To fix the bug of checking on signed return value using unsigned statement. Thanks Roel Kluin for digging out it. Signed-off-by: NRoel Kluin <roel.kluin@gmail.com> Signed-off-by: NWan ZongShun <mcuos.com@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Both vlan and macvlan devices usually don't use a qdisc and immediately queue packets to the underlying device. Propagate transmission state of the underlying device to the upper layers so they can react on congestion and/or inform the sending process. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
Untested, no hardware Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 12 11月, 2009 12 次提交
-
-
由 Ben Dooks 提交于
Add support for Wake on LAN (WOL) reception and waking the device up from this signal via the ethtool interface. Currently we are only supporting the magic-packet variant of wakeup. WOL is enabled by specifying a second interrupt resource to the driver which indicates where the interrupt for the WOL is being signalled. This then enables the necessary ethtool calls to leave the device in a state to receive WOL frames when going into suspend. Signed-off-by: NBen Dooks <ben@simtec.co.uk> Signed-off-by: NSimtec Linux Team <linux@simtec.co.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ali Gholami Rudi 提交于
The values of r_idx and rx_ring are not used after the last time they are set in ixgbe_msix_clean_rx(), so they can be removed. Signed-off-by: NAli Gholami Rudi <ali@rudi.ir> Acked-by: NPeter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ron Mercer 提交于
Signed-off-by: NRon Mercer <ron.mercer@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ron Mercer 提交于
Change it to match qlge_xxx convention. Signed-off-by: NRon Mercer <ron.mercer@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ron Mercer 提交于
Force asic to known state at open(). Signed-off-by: NRon Mercer <ron.mercer@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ron Mercer 提交于
We do not need to change the frame routing to direct all frames to the management fifo during suspend. This is now done by the firmware. Signed-off-by: NRon Mercer <ron.mercer@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Anton Vorontsov 提交于
Before calling gfar_clean_tx_ring() the driver grabs an irqsave spinlock, and then tries to recycle skbs. But since skb_recycle_check() returns 0 with IRQs disabled, we'll never recycle any skbs. It appears that gfar_clean_tx_ring() and gfar_start_xmit() are mostly idependent and can work in parallel, except when they modify num_txbdfree. So we can drop the lock from most sections and thus fix the skb recycling. Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com> Acked-by: NKumar Gala <galak@kernel.crashing.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Anton Vorontsov 提交于
gfar_error() can arrive at the middle of gfar_start_xmit() processing, and so it can trigger transfers of BDs that we don't yet expect to be transmitted. Fix this by locking the tx queues in gfar_error(). Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com> Acked-by: NKumar Gala <galak@kernel.crashing.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Anton Vorontsov 提交于
We obviously want to write a modified 'temp' value back to the register, not the saved IRQ flags. Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com> Acked-by: NKumar Gala <galak@kernel.crashing.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Anton Vorontsov 提交于
commit fba4ed03 ("gianfar: Add Multiple Queue Support") introduced the following build failure: CC gianfar.o gianfar.c: In function 'gfar_restore': gianfar.c:1249: error: request for member 'napi' in something not a structure or union This patch fixes the issue. Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com> Acked-by: NKumar Gala <galak@kernel.crashing.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Anton Vorontsov 提交于
It is OK to poll with disabled IRQs, so remove the warning. Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com> Acked-by: NKumar Gala <galak@kernel.crashing.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 John W. Linville 提交于
I may have botched my merge conflict resolution instructions for Dave... Signed-off-by: NJohn W. Linville <linville@tuxdriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 11月, 2009 20 次提交
-
-
由 Ben Hutchings 提交于
Some usbnet drivers update link state while others do not due to hardware limitations. Add a flag to distinguish those that do, and set the link down initially for their devices. This is intended to fix this bug: http://bugs.debian.org/444043Signed-off-by: NBen Hutchings <ben@decadent.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Marin Mitov 提交于
Use DMA_BIT_MASK(44) instead of deprecated DMA_44BIT_MASK Signed-off-by: NMarin Mitov <mitov@issp.bas.bg> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eilon Greenstein 提交于
Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eilon Greenstein 提交于
Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eilon Greenstein 提交于
Failing to allocate MSI-X vectors is not an error and should not be printed as such Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eilon Greenstein 提交于
Making sure that whenever the FW/HW is configured for GSO, it is also configured to CSUM offload Signed-off-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ben Hutchings 提交于
Signed-off-by: NBen Hutchings <ben@decadent.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ben Hutchings 提交于
Signed-off-by: NBen Hutchings <ben@decadent.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ben Hutchings 提交于
Signed-off-by: NBen Hutchings <ben@decadent.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ben Hutchings 提交于
Signed-off-by: NBen Hutchings <ben@decadent.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ben Hutchings 提交于
Replace run-time string formatting with preprocessor string manipulation. Signed-off-by: NBen Hutchings <ben@decadent.org.uk> Acked-by: NDivy Le Ray <divy@chelsio.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ben Hutchings 提交于
Replace run-time string formatting with preprocessor string manipulation. Signed-off-by: NBen Hutchings <ben@decadent.org.uk> Acked-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ben Hutchings 提交于
Signed-off-by: NBen Hutchings <ben@decadent.org.uk> Acked-by: NSascha Hauer <s.hauer@pengutronix.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wey-Yi Guy 提交于
Turn on RTS/CTS for HT to prevent uCode TX fifo underrun This is fix for http://bugzilla.intellinuxwireless.org/show_bug.cgi?id=2103Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Tested-by: NJiajia Zheng <jiajia.zheng@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Cc: stable@kernel.org Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Wey-Yi Guy 提交于
When 802.11g was introduced, we had RTS/CTS and CTS-to-Self protection mechanisms. In an HT Beacon, HT stations use the "Operating Mode" field in the HT Information Element to determine whether or not to use protection. The Operating Mode field has 4 possible settings: 0-3: Mode 0: If all stations in the BSS are 20/40 MHz HT capable, or if the BSS is 20/40 MHz capable, or if all stations in the BSS are 20 MHz HT stations in a 20 MHz BSS Mode 1: used if there are non-HT stations or APs using the primary or secondary channels Mode 2: if only HT stations are associated in the BSS and at least one 20 MHz HT station is associated. Mode 3: used if one or more non-HT stations are associated in the BSS. When in operating modes 1 or 3, and the Use_Protection field is 1 in the Beacon's ERP IE, all HT transmissions must be protected using RTS/CTS or CTS-to-Self. By default, CTS-to-self is the preferred protection mechanism for less overhead and higher throughput; but using the full RTS/CTS will better protect the inner exchange from interference, especially in highly-congested environment. For 6000 series WIFI NIC, RTS/CTS protection mechanism is the recommended choice for HT traffic based on the HW design. Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com> Cc: stable@kernel.org Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Bing Zhao 提交于
Configuration of wake-on-lan for unicast, multicast, broadcast, physical activity was not working. Kernel panic issue was there when user tries to disable WOL. Fixed them. Signed-off-by: NAmitkumar Karwar <akarwar@marvell.com> Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Bing Zhao 提交于
Signed-off-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Larry Finger 提交于
Due to a missing header include, sparse generates the following warnings: CHECK drivers/net/wireless/rtl818x/rtl8187_rfkill.c warning: symbol 'rtl8187_rfkill_init' was not declared. Should it be static? warning: symbol 'rtl8187_rfkill_poll' was not declared. Should it be static? warning: symbol 'rtl8187_rfkill_exit' was not declared. Should it be static? Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Bob Copeland 提交于
Setup the GPIOs for the BenQ Joybook netbook. Signed-off-by: NBob Copeland <me@bobcopeland.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Bob Copeland 提交于
Add GPIO configuration for the Compaq CQ60 laptop Reported-by: NDavid Dreggors <ddreggors@jumptv.com> Signed-off-by: NBob Copeland <me@bobcopeland.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-