- 07 7月, 2011 6 次提交
-
-
由 Jean Delvare 提交于
There is a stray "undefined" string in the array, get rid of it. Signed-off-by: NJean Delvare <khali@linux-fr.org> Cc: "John W. Linville" <linville@tuxdriver.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
This adds the necessary mac80211 APIs to support GTK rekey offload, mirroring the functionality from cfg80211. Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
In certain circumstances, like WoWLAN scenarios, devices may implement (partial) GTK rekeying on the device to avoid waking up the host for it. In order to successfully go through GTK rekeying, the KEK, KCK and the replay counter are required. Add API to let the supplicant hand the parameters to the driver which may store it for future GTK rekey operations. Note that, of course, if GTK rekeying is done by the device, the EAP frame must not be passed up to userspace, instead a rekey event needs to be sent to let userspace update its replay counter. Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
When in suspend/wowlan, devices might implement crypto offload differently (more features), and might require reprogramming keys for the WoWLAN (as it is the case for Intel devices that use another uCode image). Thus allow the driver to iterate all keys in this context. Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Jon Mason 提交于
The PCIE capability offset is saved during PCI bus walking. It will remove an unnecessary search in the PCI configuration space if this value is referenced instead of reacquiring it. Signed-off-by: NJon Mason <jdmason@kudzu.us> Acked-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 06 7月, 2011 24 次提交
-
-
由 Sergei Shtylyov 提交于
The SSB code reads PCI subsystem IDs from the PCI configuration registers while they are already stored by the PCI subsystem in the 'subsystem_{vendor|device}' fields of 'struct pci_dev'... Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Sergei Shtylyov 提交于
The SSB code reads PCI revision ID from the PCI configuration register while it's already stored by the PCI subsystem in the 'revision' field of 'struct pci_dev'... Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Michael Büsch 提交于
This adds a memory barrier to ensure the writes to the ring memory are committed before the DMA ring pointer is updated. We do a similar thing on the TX side already. Signed-off-by: NMichael Buesch <m@bues.ch> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Aloisio Almeida Jr 提交于
Signed-off-by: NAloisio Almeida Jr <aloisio.almeida@openbossa.org> Signed-off-by: NLauro Ramos Venancio <lauro.venancio@openbossa.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Aloisio Almeida Jr 提交于
Signed-off-by: NLauro Ramos Venancio <lauro.venancio@openbossa.org> Signed-off-by: NAloisio Almeida Jr <aloisio.almeida@openbossa.org> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Lauro Ramos Venancio 提交于
This socket protocol is used to perform data exchange with NFC targets. Signed-off-by: NLauro Ramos Venancio <lauro.venancio@openbossa.org> Signed-off-by: NAloisio Almeida Jr <aloisio.almeida@openbossa.org> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Aloisio Almeida Jr 提交于
Signed-off-by: NLauro Ramos Venancio <lauro.venancio@openbossa.org> Signed-off-by: NAloisio Almeida Jr <aloisio.almeida@openbossa.org> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Lauro Ramos Venancio 提交于
The NFC generic netlink interface exports the NFC control operations to the user space. Signed-off-by: NLauro Ramos Venancio <lauro.venancio@openbossa.org> Signed-off-by: NAloisio Almeida Jr <aloisio.almeida@openbossa.org> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com> Reviewed-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Lauro Ramos Venancio 提交于
The NFC subsystem core is responsible for providing the device driver interface. It is also responsible for providing an interface to the control operations and data exchange. Signed-off-by: NLauro Ramos Venancio <lauro.venancio@openbossa.org> Signed-off-by: NAloisio Almeida Jr <aloisio.almeida@openbossa.org> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
If the driver can't support WoWLAN in the current state, this patch allows it to return 1 from the suspend callback to do the normal deconfiguration instead of using suspend/resume calls. Note that if it does this, resume won't be called. Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Sergei Shtylyov 提交于
The SSB code reads PCI revision ID register as 16-bit entity while the register is actually 8-bit only (the next 8 bits are the programming interface register). Fix the read and make the 'rev' field of 'struct ssb_boardinfo' 8-bit as well, to match the register size. Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Larry Finger 提交于
In routine rtl92de_hw_init(), there are two places where a failure is not handled correctly. Reported-by: NDan Carpenter <error27@gmail.com> Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Larry Finger 提交于
There are a number of loops to implement delays. These are replaced with single calls to mdelay(). The need for a fix was noted by Andrew Morton <akpm@linux-foundation.org>. Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Christian Lamparter 提交于
Signed-off-by: NChristian Lamparter <chunkeey@googlemail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Larry Finger 提交于
Tests of a boolean against "true" are not needed as non-zero is sufficient.. Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Mike McCormack 提交于
This should be unnecessary if synchronize_irq is used. Signed-off-by: NMike McCormack <mikem@ring3k.org> Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Larry Finger 提交于
Prepare rtl8192de for the removal of irq_enaqbled. Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Andrew Morton 提交于
ERROR: "__bad_udelay" [drivers/net/wireless/rtlwifi/rtl8192de/rtl8192de.ko] undefined! Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Christian Lamparter 提交于
mlme.c l.757 ieee80211_dynamic_ps_enable_work(11) variable dereferenced before check 'sdata' mesh_pathtbl.c l.650 mesh_path_del(20) double lock 'bottom_half' l.663 mesh_path_del(33) double unlock 'bottom_half' Signed-off-by: NChristian Lamparter <chunkeey@googlemail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Christian Lamparter 提交于
Signed-off-by: NChristian Lamparter <chunkeey@googlemail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Christian Lamparter 提交于
Signed-off-by: NChristian Lamparter <chunkeey@googlemail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Christian Lamparter 提交于
This patch imports all shared header changes from carl9170fw.git. * update copyright boilerplate * add some more strategic __aligned(4). * WoWLAN Signed-off-by: NChristian Lamparter <chunkeey@googlemail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Jesper Juhl 提交于
If the 'driver_initiated' function argument to __cfg80211_stop_sched_scan() is not 0 then we'll return an uninitialized 'err' from the function. Signed-off-by: NJesper Juhl <jj@chaosbits.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Yogesh Ashok Powar 提交于
Based on inputs from Johannes Berg <johannes@sipsolutions.net> from http://article.gmane.org/gmane.linux.kernel.wireless.general/68193 and http://article.gmane.org/gmane.linux.kernel.wireless.general/71702 In xmit path, devices that do full hardware crypto (including MMIC and ICV) need no tailroom. For such devices, tailroom reservation can be skipped if all the keys are programmed into the hardware (i.e software crypto is not used for any of the keys) and none of the keys wants software to generate Michael MIC and IV. v2: Added check for IV along with MMIC. Reported-by: NFabio Rossi <rossi.f@inwind.it> Tested-by: NFabio Rossi <rossi.f@inwind.it> Signed-off-by: NMohammed Shafi Shajakhan <mshajakhan@atheros.com> Cc: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> v3: Fixing races to avoid WARNING: at net/mac80211/wpa.c:397 ccmp_encrypt_skb+0xc4/0x1f0 Reported-by: NAndreas Hartmann <andihartmann@01019freenet.de> Tested-by: NAndreas Hartmann <andihartmann@01019freenet.de> v4: Added links with message ID Signed-off-by: NYogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 01 7月, 2011 10 次提交
-
-
由 Emmanuel Grumbach 提交于
Not needed since the driver split. Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
-
由 Wey-Yi Guy 提交于
All "agn" devices use the same hcmd functions, no need to call indirectly. remove hcmd_ops Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
-
由 Wey-Yi Guy 提交于
Call the 2-wire and advanced bt-coex function directly to avoid mistake Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
-
由 Wey-Yi Guy 提交于
Assign memory boundary for SCD context, tx status and translation table Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
-
由 Emmanuel Grumbach 提交于
These functions allocate all the Tx context. Only the simple tx_init is exported as API. Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
-
由 Emmanuel Grumbach 提交于
The transport layer ness to release all rx ressources. This function is an API for it. Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
-
由 Emmanuel Grumbach 提交于
The transport layer is responsible for all the queues, DMA rings etc... This is the beginning of the separation of all the code that is tighly related to HW design to the aforementioned transport layer. Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
-
由 Wey-Yi Guy 提交于
Add the parameter to disable stuck queue watchdog timer, different platforms might have different timing. Provide the option to disable the timer to prevent un-necessary firmware reload. Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
-
由 Wey-Yi Guy 提交于
135 series are WiFi/BT combo and require different uCode from 105 series. [A Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
-
由 Wey-Yi Guy 提交于
To make sure not having issues when adding new testmode commands or attributes in the future, re-define the enum. no functional changes Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
-