This removes a lot of code that is never built in to the driver.

The size of the built code after this patch is identical to before it.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This removes a lot of code that is never built in to the driver.

The size of the built code after this patch is identical to before it.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch removes -fhard-float and the software float helpers. In-kernel
floating point is not allowed.
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This removes a number of unused functions.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This removes a number of static and extern warnings that sparse
complains about.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This wireless driver should work for the Realtek 8192 PCI devices.

It comes directly from Realtek and has been tested to work on at least
one laptop in the wild.

Cc: Anthony Wong <awong1@novell.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

* cache coherency protocol fix
 * proper timeout handling
 * implement dump/del all config group command
 	(Signed-off-by: Pierpaolo Giacomin <yrz@anche.no>)
Signed-off-by: NEvgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

mac80211 already does flush_workqueue() at stop/start and
suspend\resume.
(fix build error)
Signed-off-by: NAlexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

For ui_DelayTime to be less than 1 and greater than 1023 is logically
impossible.
Signed-off-by: NRoel Kluin <roel.kluin@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Cc: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

usb_buffer_map_sg() may return -1, check this directly.
Signed-off-by: NRoel Kluin <roel.kluin@gmail.com>
Reviewed-by: NJiri Slaby <jirislaby@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

On TI DA850/OMAP-L138 EVM, HD44780 (24x2) LCD panel is being
used[1], but it is interfaced through the SoC specific LCD
interface and not through parallel port. A parallel port
driver has been developed which interfaces to the panel driver
through the SoC specific LCD interface.

Basically, both the serial and parallel interfaces supported
by the panel driver do not suit the specific interface SoC is
supporting so, a new interface type has been introduced.

Ideally the panel driver should be de-coupled from parallel
and serial port related items but this patch is something
that can be merged in the meantime.

[1]Specification of the character LCD interface on TI DA850/OMAP-L138:
http://www.ti.com/litv/pdf/sprufm0a.
Signed-off-by: NSudhakar Rajashekhara <sudhakar.raj@ti.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Go to a u32 and masks
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This isn't actually used properly anyway
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

We don't need it, we have a perfectly good set of debug tools. For this pass
keep a few debug printks around which are "should not happen" items
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Kill off the loopback type in the driver
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Kill off the MSI structure
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

We have two trivial IRQ routines, a single statement and a real function -
relocate them. While we are at it kill the trivial to sort out soft reset
and slv bits in the same areas of code.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

We only read eeprom id 0, in byte mode - so the rest can go away
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

bOverrideAddress is write only so kill it rather than fix it
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

No point having a file just for that
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Adapter was cleared by netdev allocation so any zero defaults do not need
writing.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Prune this back as most of it isn't relevant or used
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

One writer, of a constant, one user .. it can go.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Switch this to a Linux like naming as it occurs all over.
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

They are all in the pcidev anyway plus are not used by the code
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Most are unused, one is used and can be replaced with the definition
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>