In keeping with the notion that all tools should be simple for
all to use. I've changed ktest.pl to ask for mandatory options
instead of just failing. It will append (or create) the options
the user types in, onto the config file.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

During the config_bisect, in case of failure, it is nice to have
the last good and bad .configs that were used. This would let
us restart the config_bisect from those configs.

Copy the last good config into the output dir as config_good,
and the last bad config as config_bad.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The run_ssh handles the ssh variable $SSH_COMMAND, which was not
being used by the run_command in reboot_to function.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Added the options STOP_AFTER_SUCCESS and STOP_AFTER_FAILURE to
allow the user to give a time (in seconds) to stop the monitor
after a stack trace or login has been detected. Sometimes the
kernel constantly prints out to the console and this may cause
the test to run indefinitely.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

When we store failures, we create a directory that has the build_type
in it. For useconfig, it also contains the name path of the config
file it uses. This unfortunately gets its own directory on failure.
Parse off the directory name when creating the directory to store
the failures.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

By using the "use_config" for minconfig and addconfig we risk
trying to copy itself to itself, which will cause an unexpected failure.

Use a different name instead.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Added documentation for SSH_EXEC, SCP_TO_TARGET, REBOOT,
and CONFIG_BISECT and friends.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Add a compare script that makes sure that all the options in
sample.conf are used in ktest.pl, and all the options in
ktest.pl are described in sample.conf.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Added the ability to do a config_bisect. It starts with a bad
config and does the following loop.

	Enable half the configs.
	if none of the configs to check are not enabled
	 (caused by missing dependencies) enable the other half.
	Run the test
	if the test passes, remove the configs from the check
	  but enabled them for further tests (to satisfy
	  dependencies).
	else
	  Remove any config that was not enabled, as we have found
	  a new config that can cause a failure.
	loop till we have only one config left.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Updated to version 0.2.

Now have SSH_EXEC options.

Also added some cleanups for keeping track of success and
reading the config file.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Have a easy way to parse the log file for success or failure.

 KTEST RESULT: ...
Suggested-by: NTim Bird <tim.bird@am.sony.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Allow a test case in the config file to undefine a default
value by specifying the option and equal sign but not assigning
it a value:

  OPTION =
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

To help prevent typos, use $output_config as the reference to
"$outputdir/.config".
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

If no LOG_FILE option is set, then write what would be logged to
that file to standard output.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Running the command "yes ''" through the make oldconfig may enable
things we do not want enabled. If something is default enabled, the
yes command with '' as an argument will enable it.

Use oldnoconfig, which runs everything as if 'no' was used.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Change the config to use TEST_START where the options after a
TEST_START automatically get the [] as it is read and they do
not need to exist in the config file;

TEST_START
MIN_CONFIG = myconfig

is the same as

MIN_CONFIG[1] = myconfig

The benefit is that you no longer need to keep track of test numbers
with tests.

Also process the commit ids that are passed to the options
to get the actually SHA1 so it is no longer relative to the branch.
Ie, saying HEAD will get the current SHA1 and then that will
be used, and will work even if another branch is checked out.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Added the options POWEROFF_AFTER_HALT to handle boxes that do not
really shut off after a halt is called.

Added POWERCYCLE_AFTER_REBOOT to force a power cycle for boxes that
don't reboot but get stuck during the reboot.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Add a POST_INSTALL option that runs after the build and install
but before rebooting to the test kernel. This alls the user to
run a script that will install an initrd (or anything else that may
be special) before booting.

An environment variable KERNEL_VERSION is set.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Added sample.conf as a nice document to show new users.

Use a %default hash to separate out the options that are default
and allow us to complain about options being set twice.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

It is much better to keep the monitor running throughout a
test than to constantly start and stop it. Some console readers
will show everything that has happened before when opening the
console, and by opening it several times, causes the old content to
be read multiple times in a single test.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Add option to continue after a test fails.

Add option to reset the log at start of running ktest.

Update default timeout to 2 minutes.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Added the ability to do a reverse bisect.

Better logging of running commands.

Added the copyright statement.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Added patchcheck functionality. It will checkout a given SHA1
and test that commit and all commits to another given SHA1.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Better reading of the console.

Added running a script to do testing after build succeeds.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Added bisecting, modules, logging of the output.
Banners that show success.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

REBOOT_ON_ERROR to reboot the box on error

BUILD_OPTIONS to add options to the make build (like -j40)

Added "useconfig:<config>".
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Added dodie function to have a bit more control over die calls.

BUILD_NOCLEAN to not run make mrproper or remove .config.

POWEROFF_ON_{SUCCESS,ERROR} to turn off the power after tests.

Skip backtrace calls that were done by the backtrace tests.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Originally named autotest.pl, but renamed to ktest.pl now because
the autotest name is used by other projects.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>