提交 · 9685a3609d7f15297987c511c323b43693317960 · openeuler / raspberrypi-kernel

08 3月, 2011 29 次提交

G
MX1: Add structure, registration functions for framebuffer and rename LCDC INT · 9685a360
由 Gwenhael Goavec-Merou 提交于 3月 02, 2011
```
Signed-off-by: NGwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
```
9685a360

ARM: mx5/mx53_evk: Fix IOMUX for UART3 · 54c4bd65

由 Fabio Estevam 提交于 3月 02, 2011

On mx53_evk board only RX/TX pins are used on UART3.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

54c4bd65

ARM: mx5/mx53_smd: Fix IOMUX for UART2 · d79c01b0

由 Fabio Estevam 提交于 3月 02, 2011

On mx53_smd board only RX/TX pins are used on UART2.
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

d79c01b0

ARM: mx3/mx35_3ds: Use MX35 USB OTG Erratum · 1a46cce8

由 Fabio Estevam 提交于 3月 02, 2011

Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

1a46cce8

arm: mxs: add irq_chip-name for GPIO IRQs · 761b6d1a

由 Wolfram Sang 提交于 3月 01, 2011

Reported-by: NAlexander Stein <alexander.stein@systec-electronic.com>
Signed-off-by: NWolfram Sang <w.sang@pengutronix.de>
Acked-by: NShawn Guo <shawn.guo@freescale.com>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

761b6d1a

S
ARM i.MX23/28: Add framebuffer device support · 2e8fd696
由 Sascha Hauer 提交于 1月 14, 2011
```
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
Cc: Shawn Guo <shawn.guo@freescale.com>
```
2e8fd696

video: Add i.MX23/28 framebuffer driver · f0a523b5

由 Sascha Hauer 提交于 1月 14, 2011

changes since v2:

- use v3 and v4 for specifying the ip version instead of i.MX23/28.
  This is a better namespace when future versions are added.
- rename mach/fb.h to mach/mxsfb.h

changes since v1:
- Add a LCDC_ prefix to the register names.
- use set/clear registers where appropriate
- protect call to mxsfb_disable_controller() in mxsfb_remove()
  with a (host->enabled) as suggested by Lothar Wassmann
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
Acked-by: NShawn Guo <shawn.guo@freescale.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: linux-fbdev@vger.kernel.org

f0a523b5

ARM: mxc91231/iomux: allow pin_list to be const · 8d8eb177

由 Uwe Kleine-König 提交于 3月 02, 2011

While at it remove some useless consts from unsigned int arguments.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

8d8eb177

ARM: iomux-imx31: allow pin_list to be const · 10a3c45c

由 Uwe Kleine-König 提交于 3月 02, 2011

This fixes the following warning in a mx3_defconfig build:

arch/arm/mach-mx3/mach-bug.c: In function 'bug_board_init':
arch/arm/mach-mx3/mach-bug.c:47: warning: passing argument 1 of 'mxc_iomux_setup_multiple_pins' discards qualifiers from pointer target type

While at it remove some useless consts from unsigned int arguments.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

10a3c45c

ARM: mx53_smd: Add I2C support · 20930238

由 Fabio Estevam 提交于 3月 01, 2011

Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

20930238

ARM: mx25_3ds: Add I2C support · ff864521

由 Fabio Estevam 提交于 3月 01, 2011

Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

ff864521

ARM: mx27_3ds: Add I2C support · 5885f036

由 Fabio Estevam 提交于 3月 01, 2011

Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

5885f036

ARM: mx31_3ds: Add I2C support · 3d943024

由 Fabio Estevam 提交于 3月 01, 2011

Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

3d943024

ARM: mx35_3ds: Add I2C support · 352cd9a0

由 Fabio Estevam 提交于 3月 01, 2011

Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

352cd9a0

ARM: Add SSI and aic3204 code to Visstrim_M10 boards. · a5e2051b

由 Javier Martin 提交于 3月 01, 2011

Visstrim_M10 boards have an TI tlv320aic3204 codec
attached to SSI1.
Signed-off-by: NJavier Martin <javier.martin@vista-silicon.com>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

a5e2051b

ARM: mx3/cpuimx35: fix build failure · 3fc6b609

由 Uwe Kleine-König 提交于 3月 01, 2011

It seems vim's autocompletion played tricks on me without me noticing.
This was intruduced in
	97976e22 (ARM: mx3: use .init_early to initialize cpu type, reset address and iomuxer)
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

3fc6b609

ARM: imx53_loco: add esdhc device support · 772edeae

由 Richard Zhu 提交于 2月 28, 2011

Signed-off-by: NRichard Zhao <richard.zhao@freescale.com>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

772edeae

ARM: imx51/53: add sdhc3/4 clock · 35921902

由 Richard Zhu 提交于 2月 28, 2011

Signed-off-by: NRichard Zhao <richard.zhao@freescale.com>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

35921902

arm: mxs: tx28: add i2c bus and connected RTC · a77dd2aa

由 Wolfram Sang 提交于 2月 28, 2011

Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NWolfram Sang <w.sang@pengutronix.de>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

a77dd2aa

arm: mxs: add i2c-devices for mx28 · 30feed37

由 Wolfram Sang 提交于 2月 28, 2011

Signed-off-by: NWolfram Sang <w.sang@pengutronix.de>
Acked-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

30feed37

MX1: Add registration functions for SPI. · 19373c04

由 Gwenhael Goavec-Merou 提交于 2月 23, 2011

Signed-off-by: NGwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

19373c04

MX1: Add data structure for SPI · 13f40686

由 Gwenhael Goavec-Merou 提交于 2月 23, 2011

Signed-off-by: NGwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

13f40686

MX1: Register clock for SPI2 · e893f7cb

由 Gwenhael Goavec-Merou 提交于 2月 23, 2011

Signed-off-by: NGwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

e893f7cb

MX1: Rename SPI interrupt name and base address. · 40b2747b

由 Gwenhael Goavec-Merou 提交于 2月 23, 2011

Signed-off-by: NGwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

40b2747b

ARM: imx35: fix trivial copy/paste error · 4dbbaa69

由 Ryan Lortie 提交于 2月 26, 2011

Change imx31_add_imx_keypad() to imx35_add_imx_keypad() in
mach-mx3/devices-imx35.h.
Signed-off-by: NRyan Lortie <desrt@desrt.ca>
Acked-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

4dbbaa69

ARM: imx35: fix ATA_DATA3 pad control address · d058b649

由 Ryan Lortie 提交于 2月 26, 2011

According to the "i.MX35 (MCIMX35) Multimedia Applications Processor
Reference Manual" the correct address for the pad control register
IOMUXC_SW_PAD_CTL_PAD_ATA_DATA3 is 0x06ec, not 0x6e8.
Signed-off-by: NRyan Lortie <desrt@desrt.ca>
Acked-by: NMarc Reilly <marc@cpdesign.com.au>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

d058b649

i.MX25: add sdma clock definitions · 20fcd4aa

由 Eric Bénard 提交于 2月 25, 2011

Signed-off-by: NEric Bénard <eric@eukrea.com>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

20fcd4aa

ARM: mxs: Initial support for Ka-Ro TX28 · 1cb59f9f

由 Lothar Waßmann 提交于 12月 10, 2010

Based on code created by Lothar Waßmann, Sascha Hauer, Wolfram Sang and
me.
Signed-off-by: NLothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: NWolfram Sang <w.sang@pengutronix.de>
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

1cb59f9f

ARM: mxs: Add missing EXPORT_SYMBOL for mxs_reset_block · ccb24d50

由 Sascha Hauer 提交于 2月 16, 2011

It is used for example in the i2c driver which can be compiled modular.
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

ccb24d50

01 3月, 2011 10 次提交

ARM: mxs: Add pwm clocks and device registration · 2301dfa7

由 Sascha Hauer 提交于 1月 25, 2011

Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

2301dfa7

ARM: mxc: add a dma mask to fec devices · 78159566

由 Uwe Kleine-König 提交于 1月 19, 2011

This is not strictly necessary but the right thing to do.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

78159566

ARM: mxs: add a dma mask to fec devices · f4b5d2b0

由 Lothar Waßmann 提交于 12月 15, 2010

This is not strictly necessary but the right thing to do.
Signed-off-by: NLothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

f4b5d2b0

ARM: mxc: free dma_mask in error path · c762b293

由 Uwe Kleine-König 提交于 2月 18, 2011

This fixes a small memory leak that was only hit in very unlikely error
paths
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

c762b293

ARM: mxs: free dma_mask in error path · 84082d66

由 Lothar Waßmann 提交于 12月 15, 2010

This fixes a small memory leak that was only hit in very unlikely error
paths.
Signed-off-by: NLothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>

84082d66

E
cpuimx51sd: mcp2515 supports up to 10MHz SPI clock · 8c3f2d7a
由 Eric Bénard 提交于 2月 25, 2011
```
Signed-off-by: NEric Bénard <eric@eukrea.com>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
```
8c3f2d7a

cpuimx51sd: fix tsc2007 · 33d3487f

由 Eric Bénard 提交于 2月 25, 2011

- wrong MUX was set before for IRQ
- get_pendown_state is no more needed
Signed-off-by: NEric Bénard <eric@eukrea.com>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

33d3487f

cpuimx51sd: add cpufreq support · b1372146

由 Eric Bénard 提交于 2月 25, 2011

Signed-off-by: NEric Bénard <eric@eukrea.com>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

b1372146

eukrea-tlv320: add MBIMXSD51 support · 2c4066cc

由 Eric Bénard 提交于 2月 25, 2011

Signed-off-by: NEric Bénard <eric@eukrea.com>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

2c4066cc

arm: mach-mx3: use IMX_GPIO_NR instead of hard-coded values · d4abe933

由 Wolfram Sang 提交于 2月 23, 2011

The latter are error-prone because the bank number is one less than one
would read in the documentation.
Signed-off-by: NWolfram Sang <w.sang@pengutronix.de>
Acked-by: NEric Benard <eric@eukrea.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

d4abe933

28 2月, 2011 1 次提交

mx31: add support for the bugbase 1.3 from buglabs · ea7ee4ca

由 Denis 'GNUtoo' Carikli 提交于 2月 18, 2011

Note that the hardware schematics and documentations can be obtained
here: http://www.bugcommunity.com/wiki/index.php/BUGbaseSigned-off-by: NDenis 'GNUtoo' Carikli <GNUtoo@no-log.org>
Acked-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

ea7ee4ca