- 11 2月, 2011 3 次提交
-
-
由 Anisse Astier 提交于
This netbook has a only one jack output and an internal mic. By default, mic and jack sense aren't working. Using lenovo-101e parameters makes both work. The device seems based on a Sharetronic Q70, so this should fix audio for this model too. Signed-off-by: NAnisse Astier <anisse@astier.eu> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 David Henningsson 提交于
According to the reporter, node 0x15 needs to be muted for subwoofer to stop sounding. This pin is marked as unused by BIOS, so fix that. BugLink: http://bugs.launchpad.net/bugs/715877 Cc: stable@kernel.org (2.6.37+) Reported-by: Hans Peter Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
When an empty string is passed to patch option, the driver should ignore it. Otherwise it gets an error by trying to load it. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 09 2月, 2011 1 次提交
-
-
由 Takashi Iwai 提交于
The commit 53d7d69d ALSA: hdmi - support infoframe for DisplayPort dropped the initialization of CA field accidentally. This resulted in only two-channel LPCM mode on Nvidia machines. Reference: kernel bug 28592 https://bugzilla.kernel.org/show_bug.cgi?id=28592Signed-off-by: NTakashi Iwai <tiwai@suse.de> Cc: <stable@kernel.org>
-
- 07 2月, 2011 1 次提交
-
-
由 Łukasz Wojniłowicz 提交于
Built-in sub-woofer can now be controlled by lfe slider instead of side slider on Acer Aspire 5930g Signed-off-by: NŁukasz Wojniłowicz <lukasz.wojnilowicz@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 03 2月, 2011 1 次提交
-
-
由 Takashi Iwai 提交于
The Conexant codec driver adds the jack arrays in init callback which may be called also in each PM resume. This results in the addition of new jack element at each time. The fix is to check whether the requested jack is already present in the array. Reference: Novell bug 668929 https://bugzilla.novell.com/show_bug.cgi?id=668929 Cc: <stable@kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 28 1月, 2011 1 次提交
-
-
由 David Henningsson 提交于
BugLink: http://bugs.launchpad.net/bugs/708521 This Edge 13 model has an internal mic at 0x1a and should therefore use the asus quirk. Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 26 1月, 2011 2 次提交
-
-
由 David Henningsson 提交于
BugLink: http://bugs.launchpad.net/bugs/707902 More Thinkpad machines with invalid SKU found, that disables automute between speakers and headphones on these machines. Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 David Henningsson 提交于
This typo caused the dmesg output of the supported bits of HDMI to be cut off early. Cc: stable@kernel.org Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 25 1月, 2011 1 次提交
-
-
由 Andy Robinson 提交于
Changed the Asus A52J quirk to use the asus model instead of the hp_laptop model, which fixes the external mic input. Added an Asus U50F quirk to use the asus model. For the cxt5066 codecs, added checking of the digital output pins to determine which digital output nodes to use instead of always using node 0x21, since some systems have node 0x12 connected to a SPDIF out jack. [A slight modification for better readability by tiwai] Signed-off-by: NAndy Robinson <ajr55555@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 23 1月, 2011 2 次提交
-
-
由 David Henningsson 提交于
BugLink: http://bugs.launchpad.net/bugs/701271 This new model, named "asus", is identical to the "hp_laptop" model, except for the location of the internal mic, which is at pin 0x1a. It is used for Asus K52JU and Lenovo G560. Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 David Henningsson 提交于
Four very similar procedures - one for each model - now refactored into one. This isn't all duplicated code, but a step in the right direction. Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 20 1月, 2011 4 次提交
-
-
由 Anisse Astier 提交于
Signed-off-by: NAnisse Astier <anisse@astier.eu> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 David Henningsson 提交于
BugLink: http://bugs.launchpad.net/bugs/705323 Thinkpad Edge 14 has one more SSID that suffers from disabled auto-mute. Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
sound/pci/hda/patch_realtek.c: In function ‘alc_apply_fixup’: sound/pci/hda/patch_realtek.c:1724:14: warning: unused variable ‘modelname’ snd_printdd() is evaluated only when CONFIG_SND_DEBUG_VERBOSE=y. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
It seems working well with model=hp-bpc. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 19 1月, 2011 1 次提交
-
-
由 Takashi Iwai 提交于
This reverts commit 03b7a1ab. This commit was mistakenly re-introduced. While the change is harmless (as ALC887 uses patch_alc888() now), we should get rid of any wrong code. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 18 1月, 2011 4 次提交
-
-
由 Vitaliy Kulikov 提交于
Fixes for HP 2011 notebooks: enable dock ports and disable BTL initialization in the driver. Signed-off-by: NVitaliy Kulikov <Vitaliy.Kulikov@idt.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Bankim Bhavsar 提交于
Add the new PCI ID 0x15ad and device ID 0x1977 for VMware HDAudio Controller. [changed to use AZX_DRIVER_GENERIC by tiwai] Signed-off-by: NBankim Bhavsar <bbhavsar@vmware.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Raymond Yau 提交于
Attached a patch which add a new model to support multi-streaming playback for ad1988. playback another stereo stream through the front panel headphone on device 2 while playback through the speakers connected to rear panel on device 0 at the same time. Tested with ad1988a rev2 codec on asus P5B-V motherboard. Signed-off-by: NRaymond Yau <superquad.vortex2@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 14 1月, 2011 4 次提交
-
-
由 Takashi Iwai 提交于
The commit ad09fc9d didn't cover the case for Intel and Nvidia HDMIs, where hdmi_pcm_open() is called. Put the hw_constraint there, too. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
In hdmi_pcm_open(), the evaluated PCM hw parameters are stored in hinfo, but these aren't properly set back to the current runtime record since these have been set beforehand in azx_pcm_open(). This patch fixes the behavior. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
It looks like that HDMI codecs don't support the odd number of channels although HD-audio spec doesn't have the restriction. Add the hw_constraint to limit to only the even number of channels. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 13 1月, 2011 6 次提交
-
-
由 Takashi Iwai 提交于
In some cases, the fix-up is required in the init callback to be called both at the first initialization and at the resume. The new action type ALC_FIXUP_ACT_INIT is used for this case. So far, only ALC275_FIXUP_SONY_HWEQ uses this. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Instead of keeping various data types in a single record, put the type field and keep a single value in each entry, but allows chaining multiple fixup entries. This allows more flexible data management (see ALC275_FIXUP_SONY_HWEQ for example). Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
This should be applied also only once as a part of the initialization. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
The amp-override is necessary only once at initialization time. Also fixed a coding style issue. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
... and a minor cleanup. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
When only one mic is available and it's an analog mic, the current IDT/STAC parser may give an Oops. Reference: bko#25692 https://bugzilla.kernel.org/show_bug.cgi?id=25692Signed-off-by: NTakashi Iwai <tiwai@suse.de> Cc: <stable@kernel.org>
-
- 12 1月, 2011 7 次提交
-
-
由 Takashi Iwai 提交于
With GPIO2-fixup, another fixup for NID 0x19 was missing because the fixup is applied only once. Add the corresponding verb to the entry. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Cc: <stable@kernel.org>
-
由 Kailang Yang 提交于
SONY VAIO ALC275 default BIOS verb set the hardware EQ to disable. Enable it when driver is loading. Signed-off-by: NKailang Yang <kailang@realtek.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Kailang Yang 提交于
Lenovo NB 0x9e54 use the external AMP in an inverted manner. Set EAPD to low will enable the AMP. Signed-off-by: NKailang Yang <kailang@realtek.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
The proper initializatio of NID 0x15 EAPD is missing in the quirk for Acer 4930G. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Nitin Daga 提交于
Added hardware constraint in patch_hdmi.c to disable channels 4/6 which are not supported by some older NVIDIA GPUs. Signed-off-by: NNitin Daga <ndaga@nvidia.com> Acked-By: NStephen Warren <swarren@nvidia.com> Cc: <stable@kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
The dynamic PCM restriction based on ELD information may lead to the problem in some cases, e.g. when the receiver is turned off. Then it may send a TV HDMI default such as channels = 2. Since it's still plugged, the driver doesn't know whether it's the right configuration for future use. Now, when an app opens the device at this moment, then turn on the receiver, the app still sends channels=2. The right solution is to implement some kind of notification and automatic re-open mechanism. But, this is a goal far ahead. This patch provides a workaround for such a case by providing a new module option static_hdmi_pcm for snd-hda-codec-hdmi module. When this is set to true, the driver doesn't change PCM parameters per ELD information. For users who need the static configuration like the scenario above, set this to true. The parameter can be changed dynamically via sysfs, too. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Cc: <stable@kernel.org>
-
由 Takashi Iwai 提交于
When unplugged, we shouldn't refer to ELD information for PCM open any more. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Cc: <stable@kernel.org>
-
- 10 1月, 2011 2 次提交
-
-
由 Takashi Iwai 提交于
So far, Realtek auto-parser assumed that the multiple pins are only for line-outs, and assigned the channel names like Front, Surround, etc for the multiple outputs. But, there are devices that have multiple headphones, and these can be better controlled with the corresponding control-name like "Headphone" with indicies. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
When multiple headphone pins are defined without line-out pins, the driver takes them as primary outputs. But it forgot to set line_out_type to HP by assuming there is some rest of HP pins. This results in some mis-handling of these pins for Realtek codec parser. It takes as if these are pure line-out jacks. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Cc: <stable@kernel.org>
-