- 15 3月, 2006 19 次提交
-
-
由 Andrew Vasquez 提交于
Signed-off-by: NAndrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Mike Anderson 提交于
This patch moves the calling of target_destroy next to the list_del. This closed a race being seen while doing a device add on the aic7xxx. Signed-off-by: NMike Anderson <andmike@us.ibm.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Moore, Eric 提交于
version bump Signed-off-by: NEric Moore <Eric.Moore@lsil.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Moore, Eric 提交于
This adds support for hot adding and removing expanders, and its associated attached devices. When there is a change in topology, the fusion firmware sends the MPI_EVENT_SAS_DISCOVERY event to the driver. The driver will read firmware config pages to determine what changes took place, and refresh drivers view of the world stored in ioc->sas_topology. Here is the details of the action the driver does: (1) Expander Added : The mptsas_discovery_work workqueue is called. Config pages read, and ioc->sas_topology is refreshed. The sas_phy_add() is called for each phy of the expander. The expanders attached devices are added via sas_rphy_add(). Added end devices are handled within the MPT_ADD_DEVICE logic in mptsas_hotplug_work workqueue. (2) Expander Delete : The sas_rphy_delete() will be called for the top most compenent of the parent that the expander is attached to. The sas_rphy_delete call will delete all the children phys, rphys, and end devices. This is handled from mptsas_discovery_work workqueue. Signed-off-by: NEric Moore <Eric.Moore@lsil.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Moore, Eric 提交于
Suppport for exposing hidden raid components for sg interface. The sdev->no_uld_attach flag will set set accordingly. The sas module supports adding/removing raid volumes using online storage management application interface. This patch rely's on patch's provided to me by Christoph Hellwig, that exports device_reprobe. I will post those patch's on behalf of Christoph. Signed-off-by: NEric Moore <Eric.Moore@lsil.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Moore, Eric 提交于
Changelog: (1) fix memory leak: p->phy_info (2) initialize device_info and port_info data fields (3) initialize the hba firmware handle (4) initialize phy_id for attached phy_info data fields (5) initialize attached phy_info data fields Signed-off-by: NEric Moore <Eric.Moore@lsil.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Moore, Eric 提交于
exclosure should be enclosure Signed-off-by: NEric Moore <Eric.Moore@lsil.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Moore, Eric 提交于
Cleanup of mptsas firmware event handlers. Signed-off-by: NEric Moore <Eric.Moore@lsil.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Moore, Eric 提交于
It makes no sense in keeping the target_id and bus_id in the VirtDevice structure, when it can be obtained from the VirtTarget structure. In addition, this patch fix's couple compilation bugs in mptfc.c when MPT_DEBUG_FC is enabled. This provided by Micheal Reed. Signed-off-by: NEric Moore <Eric.Moore@lsil.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Moore, Eric 提交于
Patch previously provided from Adrian Bunk <bunk@stusta.de>, moving some functions to static. This is already in the -mm tree. Signed-off-by: NEric Moore <Eric.Moore@lsil.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Moore, Eric 提交于
Created a debug level MPT_DEBUG_VERBOSE_EVENTS. Moving some of the more vebose debug messages for firwmare events into new debug level. Also added some more firmware events descriptions. Signed-off-by: NEric Moore <Eric.Moore@lsil.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Moore, Eric 提交于
This header is provided to better understand loginfo codes returned by the mpt fusion firmware. Signed-off-by: NEric Moore <Eric.Moore@lsil.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 James Bottomley 提交于
Original from Christoph Hellwig and Eric Moore. This version exports the scsi_reprobe_device() function as an inline. Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Christoph Hellwig 提交于
Replace the eh_timed_out method usage with setting sdev->timeout in slave_configure. Also only use the extended timeout for raid volumes, physical devices shouldn't need it. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 James Bottomley 提交于
-
由 Moore, Eric 提交于
Adding support for exposing hidden raid components for sg interface. The sdev->no_uld_attach flag will set set accordingly. The sas module supports adding/removing raid volumes using online storage management application interface. This patch was provided to me by Christoph Hellwig. Signed-off-by: NEric Moore <Eric.Moore@lsil.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 James Bottomley 提交于
This patch makes expanders appear as labelled objects with properties in the SAS tree. I've also modified the phy code to make expander phys appear labelled by host number, expander number and phy index. So, for my current config, you see something like this in sysfs: /sys/class/scsi_host/host1/device/phy-1:4/expander-1:0/phy-1-0:12/rphy-1:0-12/target1:0:1 And the expander properties are: jejb@sparkweed> cd /sys/class/sas_expander/expander-1\:0/ jejb@sparkweed> for f in *; do echo -n $f ": "; cat $f; done component_id : 29024 component_revision_id : 4 component_vendor_id : VITESSE device : cat: device: Is a directory level : 0 product_id : VSC7160 Eval Brd product_rev : 4 uevent : cat: uevent: Permission denied vendor_id : VITESSE Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Maneesh Soni 提交于
lapic_shutdown() re-enables interrupts which is un-desirable for panic case, so use local_irq_save() and local_irq_restore() to keep the irqs disabled for kexec on panic case, and close a possible race window while kdump shutdown as shown in this stack trace -- BUG: spinlock lockup on CPU#1, bash/4396, c52781a0 [<c01c1870>] _raw_spin_lock+0xb7/0xd2 [<c029e148>] _spin_lock+0x6/0x8 [<c011b33f>] scheduler_tick+0xe7/0x328 [<c0128a7c>] update_process_times+0x51/0x5d [<c0114592>] smp_apic_timer_interrupt+0x4f/0x58 [<c01141ff>] lapic_shutdown+0x76/0x7e [<c0104d7c>] apic_timer_interrupt+0x1c/0x30 [<c01141ff>] lapic_shutdown+0x76/0x7e [<c0116659>] machine_crash_shutdown+0x83/0xaa [<c013cc36>] crash_kexec+0xc1/0xe3 [<c029e148>] _spin_lock+0x6/0x8 [<c013cc22>] crash_kexec+0xad/0xe3 [<c0215280>] __handle_sysrq+0x84/0xfd [<c018d937>] write_sysrq_trigger+0x2c/0x35 [<c015e47b>] vfs_write+0xa2/0x13b [<c015ea73>] sys_write+0x3b/0x64 [<c0103c69>] syscall_call+0x7/0xb Signed-off-by: NManeesh Soni <maneesh@in.ibm.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Linus Torvalds 提交于
This reverts commit c33d4568. Andrew Clayton and Hugh Dickins report that it's broken for them and causes strange page table and slab corruption, and spontaneous reboots. Let's get it right next time. Cc: Andrew Clayton <andrew@rootshell.co.uk> Cc: Hugh Dickins <hugh@veritas.com> Cc: Andi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 14 3月, 2006 11 次提交
-
-
由 Dave Peterson 提交于
- Disable the EDAC sysfs code. The sysfs interface that EDAC presents to user space needs more thought, and is likely to change substantially. Therefore disable it for now so users don't start depending on it in its current form. - Disable the default behavior of calling panic() when an uncorrectible error is detected (since for now, there is no sysfs interface that allows the user to configure this behavior). Signed-off-by: NDavid S. Peterson <dsp@llnl.gov> Cc: Greg KH <greg@kroah.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Trond Myklebust 提交于
In theory, NLM specs assure us that the server will only reply LCK_GRANTED or LCK_DENIED_GRACE_PERIOD to our NLM_UNLOCK request. In practice, we should not assume this to be the case, and the code will currently Oops if we do. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Trond Myklebust 提交于
In rpc_wake_up() and rpc_wake_up_status(), it is possible for the call to __rpc_wake_up_task() to fail if another thread happens to be calling rpc_wake_up_task() on the same rpc_task. Problem noticed by Bruno Faccini. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Trond Myklebust 提交于
It turns out that nfs4_proc_get_root() may return raw NFSv4 errors instead of mapping them to kernel errors. Problem spotted by Neil Horman <nhorman@tuxdriver.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Adrian Bunk 提交于
The Coverity checker spotted this possible NULL pointer dereference in rpc_new_client(). Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Trond Myklebust 提交于
Based on an original patch by Mike O'Connor and Greg Banks of SGI. Mike states: A normal user can panic an NFS client and cause a local DoS with 'judicious'(?) use of O_DIRECT. Any O_DIRECT write to an NFS file where the user buffer starts with a valid mapped page and contains an unmapped page, will crash in this way. I haven't followed the code, but O_DIRECT reads with similar user buffers will probably also crash albeit in different ways. Details: when nfs_get_user_pages() calls get_user_pages(), it detects and correctly handles get_user_pages() returning an error, which happens if the first page covered by the user buffer's address range is unmapped. However, if the first page is mapped but some subsequent page isn't, get_user_pages() will return a positive number which is less than the number of pages requested (this behaviour is sort of analagous to a short write() call and appears to be intentional). nfs_get_user_pages() doesn't detect this and hands off the array of pages (whose last few elements are random rubbish from the newly allocated array memory) to it's caller, whence they go to nfs_direct_write_seg(), which then totally ignores the nr_pages it's given, and calculates its own idea of how many pages are in the array from the user buffer length. Needless to say, when it comes to transmit those uninitialised page* pointers, we see a crash in the network stack. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 GOTO Masanori 提交于
This patch fixes alternate signal stack corruption among cloned threads with CLONE_SIGHAND (and CLONE_VM) for linux-2.6.16-rc6. The value of alternate signal stack is currently inherited after a call of clone(... CLONE_SIGHAND | CLONE_VM). But if sigaltstack is set by a parent thread, and then if multiple cloned child threads (+ parent threads) call signal handler at the same time, some threads may be conflicted - because they share to use the same alternative signal stack region. Finally they get sigsegv. It's an undesirable race condition. Note that child threads created from NPTL pthread_create() also hit this conflict when the parent thread uses sigaltstack, without my patch. To fix this problem, this patch clears the child threads' sigaltstack information like exec(). This behavior follows the SUSv3 specification. In SUSv3, pthread_create() says "The alternate stack shall not be inherited (when new threads are initialized)". It means that sigaltstack should be cleared when sigaltstack memory space is shared by cloned threads with CLONE_SIGHAND. Note that I chose "if (clone_flags & CLONE_SIGHAND)" line because: - If clone_flags line is not existed, fork() does not inherit sigaltstack. - CLONE_VM is another choice, but vfork() does not inherit sigaltstack. - CLONE_SIGHAND implies CLONE_VM, and it looks suitable. - CLONE_THREAD is another candidate, and includes CLONE_SIGHAND + CLONE_VM, but this flag has a bit different semantics. I decided to use CLONE_SIGHAND. [ Changed to test for CLONE_VM && !CLONE_VFORK after discussion --Linus ] Signed-off-by: NGOTO Masanori <gotom@sanori.org> Cc: Roland McGrath <roland@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Acked-by: NLinus Torvalds <torvalds@osdl.org> Cc: Ulrich Drepper <drepper@redhat.com> Cc: Jakub Jelinek <jakub@redhat.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Benjamin Herrenschmidt 提交于
Report AC Power present in /proc/pmu/info if there is no battery. Signed-off-by: NOlaf Hering <olh@suse.de> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>, Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Michael Hunold 提交于
The behaviour of the all-in-one Video4Linux tuner driver apparently changed. It now wants to know the tv standard, otherwise it refuses to tune. Restore tuning functionality in my driver for the "Multimedia eXtension Board". The all-in-one tuner driver apparently changed its behaviour. Signed-off-by: NMichael Hunold <hunold@linuxtv.org> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 David Brownell 提交于
Fix a bug in the block-erase optimization for Dataflash; it was using block erase even for smaller segments that need page erase. That wouldn't matter for JFFS2, which never erases less than one block (sometimes several blocks), but for other callers it might. Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Acked-by: NDavid Woodhouse <dwmw2@infradead.org> Acked-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Herbert Xu 提交于
When we link a socket into the hash table, we need to make sure that we set the num/port fields so that it shows us with a non-zero port value in proc/netlink and on the wire. This code and comment is copied over from the IPv4 stack as is. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
- 13 3月, 2006 10 次提交
-
-
由 James Smart 提交于
This moves the eh_timed_out functionality from the scsi_host_template to the transport_template. Given that this is now a transport function, the EH_RESET_TIMER case no longer caps the timer reschedulings. The transport guarantees that this is not an infinite condition. Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Andi Kleen 提交于
EM64T CPUs have somewhat weird error reporting for non canonical RIPs in SYSRET. We can't handle any exceptions there because the exception handler would end up running on the user stack which is unsafe. To avoid problems any code that might end up with a user touched pt_regs should return using int_ret_from_syscall. int_ret_from_syscall ends up using IRET, which allows safe exceptions. Cc: Ernie Petrides <petrides@redhat.com> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Patrick McHardy 提交于
The check is wrong and lets NULL-ptrs slip through since !IS_ERR(NULL) is true. Coverity #190 Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
When ufo_append_data fails err is uninitialized, but returned back. Strangely gcc doesn't notice it. Coverity #901 and #902 Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Covertiy #547 Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
The skb given to netlink_cmsg_recv_pktinfo is already freed, move it up a few lines. Coverity #948 Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
tmp_hdr is not freed when ipv6_clear_mutable_options fails. Coverity #650 Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
The skb is allocated by the function, so it needs to be freed instead of trimmed on overrun. Coverity #614 Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Fix NULL-ptr dereference when a config message for a non-existant queue containing only an NFQA_CFG_PARAMS attribute is received. Coverity #433 Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Linus Torvalds 提交于
* 'upstream-fixes' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: [PATCH] ahci: fix NULL pointer dereference detected by Coverity
-