Impact: new API

Add a helper function that takes two cpumask's, and's them and then
returns the apicid of the result.  This removes a need in io_apic.c
that uses a temporary cpumask to hold (mask & cfg->domain).
Signed-off-by: NMike Travis <travis@sgi.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Impact: cleanup, change parameter passing

  * Change genapic interfaces to accept cpumask_t pointers where possible.

  * Modify external callers to use cpumask_t pointers in function calls.

  * Create new send_IPI_mask_allbutself which is the same as the
    send_IPI_mask functions but removes smp_processor_id() from list.
    This removes another common need for a temporary cpumask_t variable.

  * Functions that used a temp cpumask_t variable for:

	cpumask_t allbutme = cpu_online_map;

	cpu_clear(smp_processor_id(), allbutme);
	if (!cpus_empty(allbutme))
		...

    become:

	if (!cpus_equal(cpu_online_map, cpumask_of_cpu(cpu)))
		...

  * Other minor code optimizations (like using cpus_clear instead of
    CPU_MASK_NONE, etc.)

Applies to linux-2.6.tip/master.
Signed-off-by: NMike Travis <travis@sgi.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Acked-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

__FUNCTION__ is gcc-specific, use __func__
Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

so we can merge io_apic_32.c and io_apic_64.c

v2: Use cpu_online_map as target cpus for bigsmp, just like 64-bit is doing.

Also remove some unused TARGET_CPUS macro.

v3: need to check if desc is null in smp_irq_move_cleanup

also migration needs to reset vector too, so copy __target_IO_APIC_irq
from 64bit.

(the duplication will go away once the two files are unified.)
Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NYinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

x86 kernels on IBM Summit based systems will only online 1 CPU because the
phys_cpu_present_map is not set up correctly. Patch below applied to
2.6.26-git10.
Signed-off-by: NChris McDermott <lcm@linux.vnet.ibm.com>
Tested-by: NTim Pepper <lnxninga@linux.vnet.ibm.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This patch is the result of an automatic script that consolidates the
format of all the headers in include/asm-x86/.

The format:

1. No leading underscore. Names with leading underscores are reserved.
2. Pathname components are separated by two underscores. So we can
   distinguish between mm_types.h and mm/types.h.
3. Everything except letters and numbers are turned into single
   underscores.
Signed-off-by: NVegard Nossum <vegard.nossum@gmail.com>

Use alternatives to select the workaround for the 11AP Pentium erratum
for the affected steppings on the fly rather than build time.  Remove the
X86_GOOD_APIC configuration option and replace all the calls to
apic_write_around() with plain apic_write(), protecting accesses to the
ESR as appropriate due to the 3AP Pentium erratum.  Remove
apic_read_around() and all its invocations altogether as not needed.
Remove apic_write_atomic() and all its implementing backends.  The use of
ASM_OUTPUT2() is not strictly needed for input constraints, but I have
used it for readability's sake.

I had the feeling no one else was brave enough to do it, so I went ahead
and here it is.  Verified by checking the generated assembly and tested
with both a 32-bit and a 64-bit configuration, also with the 11AP
"feature" forced on and verified with gdb on /proc/kcore to work as
expected (as an 11AP machines are quite hard to get hands on these days).
Some script complained about the use of "volatile", but apic_write() needs
it for the same reason and is effectively a replacement for writel(), so I
have disregarded it.

I am not sure what the policy wrt defconfig files is, they are generated
and there is risk of a conflict resulting from an unrelated change, so I
have left changes to them out.  The option will get removed from them at
the next run.

Some testing with machines other than mine will be needed to avoid some
stupid mistake, but despite its volume, the change is not really that
intrusive, so I am fairly confident that because it works for me, it will
everywhere.
Signed-off-by: NMaciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NAlexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This mapping already exists in x86_64, just provide it for
i386
Signed-off-by: NGlauber Costa <gcosta@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Bring the mpspec variants into sync to prepare merging and
paravirt support.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Move the headers to include/asm-x86 and fixup the
header install make rules
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Default to physical mode on hotplug CPU kernels.  Furher simplify and clean up
the APIC initialization code.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndi Kleen <ak@suse.de>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Andi Kleen <ak@suse.de>
Cc: "Li, Shaohua" <shaohua.li@intel.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>

Fix

arch/i386/mach-generic/built-in.o: In function `apicid_to_node':
summit.c:(.text+0x2f): undefined reference to `apicid_2_node'

with CONFIG_GENERICH_ARCH and !CONFIG_SMP
Signed-off-by: NAndi Kleen <ak@suse.de>

This allows numaq to properly align cpus to their given node during
boot.  Pass logical apicid to apicid_to_node and allow the summit
sub-arch to use physical apicid (hard_smp_processor_id()).

Tested against numaq and summit based systems with no issues.
Signed-off-by: NKeith Mannthey <kmannth@us.ibm.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Convert the i386 summit subarch apicid_to_node to use node information
provided by the SRAT.  It was discussed a little on LKML a few weeks ago
and was seen as an acceptable fix.  The current way of obtaining the nodeid

 static inline int apicid_to_node(int logical_apicid)
 {
   return logical_apicid >> 5;
 }

is just not correct for all summit systems/bios.  Assuming the apicid
matches the Linux node number require a leap of faith that the bios mapped
out the apicids a set way.  Modern summit HW (IBM x460) does not layout its
bios in the manner for various reasons and is unable to boot i386 numa.

The best way to get the correct apicid to node information is from the SRAT
table during boot.  It lays out what apicid belongs to what node.  I use
this information to create a table for use at run time.
Signed-off-by: NKeith Mannthey <kmannth@us.ibm.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

There are some machines around (large xSeries or Unisys ES7000) that
need physical IO-APIC destination mode to access all of their IO
devices. This currently doesn't work in UP kernels as used in
distribution installers.

This patch allows to compile even UP kernels as GENERICARCH which
allows to use physical or clustered APIC mode.
Signed-off-by: NAndi Kleen <ak@suse.de>

Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

This patch is per Andi's request to remove NO_IOAPIC_CHECK from genapic and
use heuristics to prevent unique I/O APIC ID check for systems that don't
need it.  The patch disables unique I/O APIC ID check for Xeon-based and
other platforms that don't use serial APIC bus for interrupt delivery.
Andi stated that AMD systems don't need unique IO_APIC_IDs either.
Signed-off-by: NNatalie Protasevich <Natalie.Protasevich@unisys.com>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!