- 29 4月, 2011 1 次提交
-
-
由 Tejun Heo 提交于
__blkdev_get() doesn't rescan partitions if disk->fops->open() fails, which leads to ghost partition devices lingering after medimum removal is known to both the kernel and userland. The behavior also creates a subtle inconsistency where O_NONBLOCK open, which doesn't fail even if there's no medium, clears the ghots partitions, which is exploited to work around the problem from userland. Fix it by updating __blkdev_get() to issue partition rescan after -ENOMEDIA too. This was reported in the following bz. https://bugzilla.kernel.org/show_bug.cgi?id=13029 Stable: 2.6.38 Signed-off-by: NTejun Heo <tj@kernel.org> Reported-by: NDavid Zeuthen <zeuthen@gmail.com> Reported-by: NMartin Pitt <martin.pitt@ubuntu.com> Reported-by: NKay Sievers <kay.sievers@vrfy.org> Tested-by: NKay Sievers <kay.sievers@vrfy.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: stable@kernel.org Signed-off-by: NJens Axboe <jaxboe@fusionio.com>
-
- 22 4月, 2011 2 次提交
-
-
由 Tejun Heo 提交于
Disk event code automatically blocks events on excl write. This is primarily to avoid issuing polling commands while burning is in progress. This behavior doesn't fit other types of devices with removeable media where polling commands don't have adverse side effects and door locking usually doesn't exist. This patch introduces new genhd flag which controls the auto-blocking behavior and uses it to enable auto-blocking only on optical devices. Note for stable: 2.6.38 and later only Cc: stable@kernel.org Signed-off-by: NTejun Heo <tj@kernel.org> Reported-by: NKay Sievers <kay.sievers@vrfy.org> Signed-off-by: NJens Axboe <jaxboe@fusionio.com>
-
由 Tejun Heo 提交于
__blkdev_get() doesn't rescan partitions if disk->fops->open() fails, which leads to ghost partition devices lingering after medimum removal is known to both the kernel and userland. The behavior also creates a subtle inconsistency where O_NONBLOCK open, which doesn't fail even if there's no medium, clears the ghots partitions, which is exploited to work around the problem from userland. Fix it by updating __blkdev_get() to issue partition rescan after -ENOMEDIA too. This was reported in the following bz. https://bugzilla.kernel.org/show_bug.cgi?id=13029 Note for stable: 2.6.38 and later only Cc: stable@kernel.org Signed-off-by: NTejun Heo <tj@kernel.org> Reported-by: NDavid Zeuthen <zeuthen@gmail.com> Reported-by: NMartin Pitt <martin.pitt@ubuntu.com> Reported-by: NKay Sievers <kay.sievers@vrfy.org> Tested-by: NKay Sievers <kay.sievers@vrfy.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: NJens Axboe <jaxboe@fusionio.com>
-
- 31 3月, 2011 1 次提交
-
-
由 Lucas De Marchi 提交于
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: NLucas De Marchi <lucas.demarchi@profusion.mobi>
-
- 25 3月, 2011 2 次提交
-
-
由 Dave Chinner 提交于
Protect the inode writeback list with a new global lock inode_wb_list_lock and use it to protect the list manipulations and traversals. This lock replaces the inode_lock as the inodes on the list can be validity checked while holding the inode->i_lock and hence the inode_lock is no longer needed to protect the list. Signed-off-by: NDave Chinner <dchinner@redhat.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Dave Chinner 提交于
Protect inode state transitions and validity checks with the inode->i_lock. This enables us to make inode state transitions independently of the inode_lock and is the first step to peeling away the inode_lock from the code. This requires that __iget() is done atomically with i_state checks during list traversals so that we don't race with another thread marking the inode I_FREEING between the state check and grabbing the reference. Also remove the unlock_new_inode() memory barrier optimisation required to avoid taking the inode_lock when clearing I_NEW. Simplify the code by simply taking the inode->i_lock around the state change and wakeup. Because the wakeup is no longer tricky, remove the wake_up_inode() function and open code the wakeup where necessary. Signed-off-by: NDave Chinner <dchinner@redhat.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 19 3月, 2011 1 次提交
-
-
由 Dan Carpenter 提交于
"disk" is always NULL when we goto out. There was a check for this before, but it was removed in 69e02c59 "block: Don't check events while open is in progress". Signed-off-by: NDan Carpenter <error27@gmail.com> Acked-by: NTejun Heo <tj@kernel.org> Signed-off-by: NJens Axboe <axboe@carl>
-
- 10 3月, 2011 4 次提交
-
-
由 Jens Axboe 提交于
Code has been converted over to the new explicit on-stack plugging, and delay users have been converted to use the new API for that. So lets kill off the old plugging along with aops->sync_page(). Signed-off-by: NJens Axboe <jaxboe@fusionio.com>
-
由 Tejun Heo 提交于
Not all block drivers clear events immediately after reporting. Some do so in ->revalidate_disk() or other steps during ->open(). There is a slim chance event poll may happen between the clearing event check from check_disk_change() and the actual clearing of the events which would result in spurious events. Block event checks while block device open is in progress. There is no need to kick explicit event check afterwards as events are always checked during open. -v2: The original patch could have called disk_unblock_events() with an already released or %NULL @disk causing oops. Fixed by making sure references are put after disk_unblock_events() is called. It also makes the error path of __blkdev_get() a bit simpler. This problem was reported by Jens. Signed-off-by: NTejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Kay Sievers <kay.sievers@vrfy.org>
-
由 Tejun Heo 提交于
The block event mechanism currently always checks events when the device is being closed regardless of the open mode. The intention was to allow detection of EJECT_REQUEST when a device is closed whether disk event polling is enabled or not. This is unnecessary as, for devices of interest, events are checked from either userland or kernel and in the former case ->check_events() is performed on open of each poll attempt anyway. Furthermore, this unconditional event check on close makes the code susceptible to event loop if the block driver doesn't clear reported events correctly - an event triggers userland to open and close the device which in turn causes another event, rinse and repeat. Check events on close only if it was blocked by excl write open. Signed-off-by: NTejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Kay Sievers <kay.sievers@vrfy.org>
-
由 Tejun Heo 提交于
Currently, disk_unblock_events() implicitly kick event check if the block count reaches zero. This behavior is not described in the comment and hinders with future changes. Make the unblocker explicitly check events by calling disk_check_events() as necessary. This patch doesn't cause any behavior difference. Signed-off-by: NTejun Heo <tj@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Kay Sievers <kay.sievers@vrfy.org>
-
- 01 3月, 2011 1 次提交
-
-
由 Randy Dunlap 提交于
Fix new kernel-doc warning in fs/block_dev.c: Warning(fs/block_dev.c:937): No description found for parameter 'kill_dirty' Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 25 2月, 2011 1 次提交
-
-
由 Tejun Heo 提交于
The new implementation of bd_link_disk_holder() added by 49731baa (block: restore multiple bd_link_disk_holder() support) didn't get an extra reference for the holder_dir kobject of the slave bdev; however, bdev kills holder_dir on removal, not release, so if the slave bdev is removed while there are holder links, the holder_dir will be destroyed while there still are holder links, which leads to oops later when bd_unlink_disk_order() tries to remove those links. Make bd_link_disk_holder() grab an extra reference for the slave's holder_dir and put it in bd_unlink_disk_holder(). Signed-off-by: NTejun Heo <tj@kernel.org> Reported-by: N"Hawrylewicz Czarnowski, Przemyslaw" <przemyslaw.hawrylewicz.czarnowski@intel.com> Tested-by: N"Hawrylewicz Czarnowski, Przemyslaw" <przemyslaw.hawrylewicz.czarnowski@intel.com> Cc: Neil Brown <neilb@suse.de> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 24 2月, 2011 1 次提交
-
-
由 NeilBrown 提交于
There are two cases when we call flush_disk. In one, the device has disappeared (check_disk_change) so any data will hold becomes irrelevant. In the oter, the device has changed size (check_disk_size_change) so data we hold may be irrelevant. In both cases it makes sense to discard any 'clean' buffers, so they will be read back from the device if needed. In the former case it makes sense to discard 'dirty' buffers as there will never be anywhere safe to write the data. In the second case it *does*not* make sense to discard dirty buffers as that will lead to file system corruption when you simply enlarge the containing devices. flush_disk calls __invalidate_devices. __invalidate_device calls both invalidate_inodes and invalidate_bdev. invalidate_inodes *does* discard I_DIRTY inodes and this does lead to fs corruption. invalidate_bev *does*not* discard dirty pages, but I don't really care about that at present. So this patch adds a flag to __invalidate_device (calling it __invalidate_device2) to indicate whether dirty buffers should be killed, and this is passed to invalidate_inodes which can choose to skip dirty inodes. flusk_disk then passes true from check_disk_change and false from check_disk_size_change. dm avoids tripping over this problem by calling i_size_write directly rathher than using check_disk_size_change. md does use check_disk_size_change and so is affected. This regression was introduced by commit 608aeef1 which causes check_disk_size_change to call flush_disk, so it is suitable for any kernel since 2.6.27. Cc: stable@kernel.org Acked-by: NJeff Moyer <jmoyer@redhat.com> Cc: Andrew Patterson <andrew.patterson@hp.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: NNeilBrown <neilb@suse.de>
-
- 17 2月, 2011 1 次提交
-
-
由 Chuck Ebbert 提交于
This reverts commit 75f1dc0d ("block: check bdev_read_only() from blkdev_get()"). That commit added stricter checking to make sure devices that were being used read-only were actually opened in that mode. It turns out that the change breaks a bunch of kernel code that opens block devices. Affected systems include dm, md, and the loop device. Because strict checking for read-only opens of block devices was not done before this, the code that opens the devices was opening them read-write even if they were being used read-only. Auditing all that code will take time, and new userspace packages for dm, mdadm, etc. will also be required. Signed-off-by: NChuck Ebbert <cebbert@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 15 1月, 2011 1 次提交
-
-
由 Tejun Heo 提交于
Commit e09b457b (block: simplify holder symlink handling) incorrectly assumed that there is only one link at maximum. dm may use multiple links and expects block layer to track reference count for each link, which is different from and unrelated to the exclusive device holder identified by @holder when the device is opened. Remove the single holder assumption and automatic removal of the link and revive the per-link reference count tracking. The code essentially behaves the same as before commit e09b457b sans the unnecessary kobject reference count dancing. While at it, note that this facility should not be used by anyone else than the current ones. Sysfs symlinks shouldn't be abused like this and the whole thing doesn't belong in the block layer at all. Signed-off-by: NTejun Heo <tj@kernel.org> Reported-by: NMilan Broz <mbroz@redhat.com> Cc: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Cc: Neil Brown <neilb@suse.de> Cc: linux-raid@vger.kernel.org Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: NJens Axboe <jaxboe@fusionio.com>
-
- 13 1月, 2011 1 次提交
-
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 07 1月, 2011 1 次提交
-
-
由 Nick Piggin 提交于
RCU free the struct inode. This will allow: - Subsequent store-free path walking patch. The inode must be consulted for permissions when walking, so an RCU inode reference is a must. - sb_inode_list_lock to be moved inside i_lock because sb list walkers who want to take i_lock no longer need to take sb_inode_list_lock to walk the list in the first place. This will simplify and optimize locking. - Could remove some nested trylock loops in dcache code - Could potentially simplify things a bit in VM land. Do not need to take the page lock to follow page->mapping. The downsides of this is the performance cost of using RCU. In a simple creat/unlink microbenchmark, performance drops by about 10% due to inability to reuse cache-hot slab objects. As iterations increase and RCU freeing starts kicking over, this increases to about 20%. In cases where inode lifetimes are longer (ie. many inodes may be allocated during the average life span of a single inode), a lot of this cache reuse is not applicable, so the regression caused by this patch is smaller. The cache-hot regression could largely be avoided by using SLAB_DESTROY_BY_RCU, however this adds some complexity to list walking and store-free path walking, so I prefer to implement this at a later date, if it is shown to be a win in real situations. I haven't found a regression in any non-micro benchmark so I doubt it will be a problem. Signed-off-by: NNick Piggin <npiggin@kernel.dk>
-
- 17 12月, 2010 1 次提交
-
-
由 Tejun Heo 提交于
Currently, media presence polling for removeable block devices is done from userland. There are several issues with this. * Polling is done by periodically opening the device. For SCSI devices, the command sequence generated by such action involves a few different commands including TEST_UNIT_READY. This behavior, while perfectly legal, is different from Windows which only issues single command, GET_EVENT_STATUS_NOTIFICATION. Unfortunately, some ATAPI devices lock up after being periodically queried such command sequences. * There is no reliable and unintrusive way for a userland program to tell whether the target device is safe for media presence polling. For example, polling for media presence during an on-going burning session can make it fail. The polling program can avoid this by opening the device with O_EXCL but then it risks making a valid exclusive user of the device fail w/ -EBUSY. * Userland polling is unnecessarily heavy and in-kernel implementation is lighter and better coordinated (workqueue, timer slack). This patch implements framework for in-kernel disk event handling, which includes media presence polling. * bdops->check_events() is added, which supercedes ->media_changed(). It should check whether there's any pending event and return if so. Currently, two events are defined - DISK_EVENT_MEDIA_CHANGE and DISK_EVENT_EJECT_REQUEST. ->check_events() is guaranteed not to be called parallelly. * gendisk->events and ->async_events are added. These should be initialized by block driver before passing the device to add_disk(). The former contains the mask of all supported events and the latter the mask of all events which the device can report without polling. /sys/block/*/events[_async] export these to userland. * Kernel parameter block.events_dfl_poll_msecs controls the system polling interval (default is 0 which means disable) and /sys/block/*/events_poll_msecs control polling intervals for individual devices (default is -1 meaning use system setting). Note that if a device can report all supported events asynchronously and its polling interval isn't explicitly set, the device won't be polled regardless of the system polling interval. * If a device is opened exclusively with write access, event checking is automatically disabled until all write exclusive accesses are released. * There are event 'clearing' events. For example, both of currently defined events are cleared after the device has been successfully opened. This information is passed to ->check_events() callback using @clearing argument as a hint. * Event checking is always performed from system_nrt_wq and timer slack is set to 25% for polling. * Nothing changes for drivers which implement ->media_changed() but not ->check_events(). Going forward, all drivers will be converted to ->check_events() and ->media_change() will be dropped. Signed-off-by: NTejun Heo <tj@kernel.org> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: Jan Kara <jack@suse.cz> Signed-off-by: NJens Axboe <jaxboe@fusionio.com>
-
- 18 11月, 2010 1 次提交
-
-
由 Arnd Bergmann 提交于
The big kernel lock has been removed from all these files at some point, leaving only the #include. Remove this too as a cleanup. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 13 11月, 2010 5 次提交
-
-
由 Tejun Heo 提交于
After recent blkdev_get() modifications, open_by_devnum() and open_bdev_exclusive() are simple wrappers around blkdev_get(). Replace them with blkdev_get_by_dev() and blkdev_get_by_path(). blkdev_get_by_dev() is identical to open_by_devnum(). blkdev_get_by_path() is slightly different in that it doesn't automatically add %FMODE_EXCL to @mode. All users are converted. Most conversions are mechanical and don't introduce any behavior difference. There are several exceptions. * btrfs now sets FMODE_EXCL in btrfs_device->mode, so there's no reason to OR it explicitly on blkdev_put(). * gfs2, nilfs2 and the generic mount_bdev() now set FMODE_EXCL in sb->s_mode. * With the above changes, sb->s_mode now always should contain FMODE_EXCL. WARN_ON_ONCE() added to kill_block_super() to detect errors. The new blkdev_get_*() functions are with proper docbook comments. While at it, add function description to blkdev_get() too. Signed-off-by: NTejun Heo <tj@kernel.org> Cc: Philipp Reisner <philipp.reisner@linbit.com> Cc: Neil Brown <neilb@suse.de> Cc: Mike Snitzer <snitzer@redhat.com> Cc: Joern Engel <joern@lazybastard.org> Cc: Chris Mason <chris.mason@oracle.com> Cc: Jan Kara <jack@suse.cz> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: KONISHI Ryusuke <konishi.ryusuke@lab.ntt.co.jp> Cc: reiserfs-devel@vger.kernel.org Cc: xfs-masters@oss.sgi.com Cc: Alexander Viro <viro@zeniv.linux.org.uk>
-
由 Tejun Heo 提交于
bdev read-only status can be queried using bdev_read_only() and may change while the device is being opened. Enforce it by checking it from blkdev_get() after open succeeds. This makes bdev_read_only() check in open_bdev_exclusive() and fsg_lun_open() unnecessary. Drop them. Signed-off-by: NTejun Heo <tj@kernel.org> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: linux-usb@vger.kernel.org
-
由 Tejun Heo 提交于
With claim/release rolled into blkdev_get/put(), there's no reason to keep bd_abort/finish_claim(), __bd_claim() and bd_release() as separate functions. It only makes the code difficult to follow. Collapse them into blkdev_get/put(). This will ease future changes around claim/release. Signed-off-by: NTejun Heo <tj@kernel.org>
-
由 Tejun Heo 提交于
Over time, block layer has accumulated a set of APIs dealing with bdev open, close, claim and release. * blkdev_get/put() are the primary open and close functions. * bd_claim/release() deal with exclusive open. * open/close_bdev_exclusive() are combination of open and claim and the other way around, respectively. * bd_link/unlink_disk_holder() to create and remove holder/slave symlinks. * open_by_devnum() wraps bdget() + blkdev_get(). The interface is a bit confusing and the decoupling of open and claim makes it impossible to properly guarantee exclusive access as in-kernel open + claim sequence can disturb the existing exclusive open even before the block layer knows the current open if for another exclusive access. Reorganize the interface such that, * blkdev_get() is extended to include exclusive access management. @holder argument is added and, if is @FMODE_EXCL specified, it will gain exclusive access atomically w.r.t. other exclusive accesses. * blkdev_put() is similarly extended. It now takes @mode argument and if @FMODE_EXCL is set, it releases an exclusive access. Also, when the last exclusive claim is released, the holder/slave symlinks are removed automatically. * bd_claim/release() and close_bdev_exclusive() are no longer necessary and either made static or removed. * bd_link_disk_holder() remains the same but bd_unlink_disk_holder() is no longer necessary and removed. * open_bdev_exclusive() becomes a simple wrapper around lookup_bdev() and blkdev_get(). It also has an unexpected extra bdev_read_only() test which probably should be moved into blkdev_get(). * open_by_devnum() is modified to take @holder argument and pass it to blkdev_get(). Most of bdev open/close operations are unified into blkdev_get/put() and most exclusive accesses are tested atomically at the open time (as it should). This cleans up code and removes some, both valid and invalid, but unnecessary all the same, corner cases. open_bdev_exclusive() and open_by_devnum() can use further cleanup - rename to blkdev_get_by_path() and blkdev_get_by_devt() and drop special features. Well, let's leave them for another day. Most conversions are straight-forward. drbd conversion is a bit more involved as there was some reordering, but the logic should stay the same. Signed-off-by: NTejun Heo <tj@kernel.org> Acked-by: NNeil Brown <neilb@suse.de> Acked-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Acked-by: NMike Snitzer <snitzer@redhat.com> Acked-by: NPhilipp Reisner <philipp.reisner@linbit.com> Cc: Peter Osterlund <petero2@telia.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Jan Kara <jack@suse.cz> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <joel.becker@oracle.com> Cc: Alex Elder <aelder@sgi.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: dm-devel@redhat.com Cc: drbd-dev@lists.linbit.com Cc: Leo Chen <leochen@broadcom.com> Cc: Scott Branden <sbranden@broadcom.com> Cc: Chris Mason <chris.mason@oracle.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Dave Kleikamp <shaggy@linux.vnet.ibm.com> Cc: Joern Engel <joern@logfs.org> Cc: reiserfs-devel@vger.kernel.org Cc: Alexander Viro <viro@zeniv.linux.org.uk>
-
由 Tejun Heo 提交于
Code to manage symlinks in /sys/block/*/{holders|slaves} are overly complex with multiple holder considerations, redundant extra references to all involved kobjects, unused generic kobject holder support and unnecessary mixup with bd_claim/release functionalities. Strip it down to what's necessary (single gendisk holder) and make it use a separate interface. This is a step for cleaning up bd_claim/release. This patch makes dm-table slightly more complex but it will be simplified again with further changes. Signed-off-by: NTejun Heo <tj@kernel.org> Acked-by: NNeil Brown <neilb@suse.de> Acked-by: NMike Snitzer <snitzer@redhat.com> Cc: dm-devel@redhat.com
-
- 29 10月, 2010 1 次提交
-
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 26 10月, 2010 3 次提交
-
-
由 Nick Piggin 提交于
The use of the same inode list structure (inode->i_list) for two different list constructs with different lifecycles and purposes makes it impossible to separate the locking of the different operations. Therefore, to enable the separation of the locking of the writeback and reclaim lists, split the inode->i_list into two separate lists dedicated to their specific tracking functions. Signed-off-by: NNick Piggin <npiggin@suse.de> Signed-off-by: NDave Chinner <dchinner@redhat.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Dave Chinner 提交于
bdev inodes can remain dirty even after their last close. Hence the BDI associated with the bdev->inode gets modified duringthe last close to point to the default BDI. However, the bdev inode still needs to be moved to the dirty lists of the new BDI, otherwise it will corrupt the writeback list is was left on. Add a new function bdev_inode_switch_bdi() to move all the bdi state from the old bdi to the new one safely. This is only a temporary measure until the bdev inode<->bdi lifecycle problems are sorted out. Signed-off-by: NDave Chinner <dchinner@redhat.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Clones an existing reference to inode; caller must already hold one. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 17 9月, 2010 1 次提交
-
-
由 Christoph Hellwig 提交于
All the blkdev_issue_* helpers can only sanely be used for synchronous caller. To issue cache flushes or barriers asynchronously the caller needs to set up a bio by itself with a completion callback to move the asynchronous state machine ahead. So drop the BLKDEV_IFL_WAIT flag that is always specified when calling blkdev_issue_* and also remove the now unused flags argument to blkdev_issue_flush and blkdev_issue_zeroout. For blkdev_issue_discard we need to keep it for the secure discard flag, which gains a more descriptive name and loses the bitops vs flag confusion. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NJens Axboe <jaxboe@fusionio.com>
-
- 11 8月, 2010 1 次提交
-
-
由 Chris Wright 提交于
The cgroup device whitelist code gets confused when trying to grant permission to a disk partition that is not currently open. Part of blkdev_open() includes __blkdev_get() on the whole disk. Basically, the only ways to reliably allow a cgroup access to a partition on a block device when using the whitelist are to 1) also give it access to the whole block device or 2) make sure the partition is already open in a different context. The patch avoids the cgroup check for the whole disk case when opening a partition. Addresses https://bugzilla.redhat.com/show_bug.cgi?id=589662Signed-off-by: NChris Wright <chrisw@sous-sol.org> Acked-by: NSerge E. Hallyn <serue@us.ibm.com> Tested-by: NSerge E. Hallyn <serue@us.ibm.com> Reported-by: NVivek Goyal <vgoyal@redhat.com> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Christoph Hellwig <hch@infradead.org> Cc: "Daniel P. Berrange" <berrange@redhat.com> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 10 8月, 2010 3 次提交
-
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Christoph Hellwig 提交于
Move the call to vmtruncate to get rid of accessive blocks to the callers in preparation of the new truncate sequence and rename the non-truncating version to block_write_begin. While we're at it also remove several unused arguments to block_write_begin. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Christoph Hellwig 提交于
Move the call to vmtruncate to get rid of accessive blocks to the callers in prepearation of the new truncate calling sequence. This was only done for DIO_LOCKING filesystems, so the __blockdev_direct_IO_newtrunc variant was not needed anyway. Get rid of blockdev_direct_IO_no_locking and its _newtrunc variant while at it as just opencoding the two additional paramters is shorted than the name suffix. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 08 8月, 2010 1 次提交
-
-
由 Arnd Bergmann 提交于
The open and release block_device_operations are currently called with the BKL held. In order to change that, we must first make sure that all drivers that currently rely on this have no regressions. This blindly pushes the BKL into all .open and .release operations for all block drivers to prepare for the next step. The drivers can subsequently replace the BKL with their own locks or remove it completely when it can be shown that it is not needed. The functions blkdev_get and blkdev_put are the only remaining users of the big kernel lock in the block layer, besides a few uses in the ioctl code, none of which need to serialize with blkdev_{get,put}. Most of these two functions is also under the protection of bdev->bd_mutex, including the actual calls to ->open and ->release, and the common code does not access any global data structures that need the BKL. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NJens Axboe <jaxboe@fusionio.com>
-
- 05 8月, 2010 1 次提交
-
-
由 Tejun Heo 提交于
bd_prepare_to_claim() incorrectly allowed multiple attempts for exclusive open to progress in parallel if the attempting holders are identical. This triggered BUG_ON() as reported in the following bug. https://bugzilla.kernel.org/show_bug.cgi?id=16393 __bd_abort_claiming() is used to finish claiming blocks and doesn't work if multiple openers are inside a claiming block. Allowing multiple parallel open attempts to continue doesn't gain anything as those are serialized down in the call chain anyway. Fix it by always allowing only single open attempt in a claiming block. This problem can easily be reproduced by adding a delay after bd_prepare_to_claim() and attempting to mount two partitions of a disk. stable: only applicable to v2.6.35 Signed-off-by: NTejun Heo <tj@kernel.org> Reported-by: NMarkus Trippelsdorf <markus@trippelsdorf.de> Cc: stable@kernel.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 11 6月, 2010 3 次提交
-
-
由 Jens Axboe 提交于
We do the same BUG_ON() just a line later when calling into __bd_abort_claiming(). Reported-by: NTejun Heo <tj@kernel.org> Signed-off-by: NJens Axboe <jaxboe@fusionio.com>
-
由 Nick Piggin 提交于
I don't like the subtle multi-context code in bd_claim (ie. detects where it has been called based on bd_claiming). It seems clearer to just require a new function to finish a 2-part claim. Also improve commentary in bd_start_claiming as to how it should be used. Signed-off-by: NNick Piggin <npiggin@suse.de> Acked-by: NTejun Heo <tj@kernel.org> Signed-off-by: NJens Axboe <jaxboe@fusionio.com>
-
由 Nick Piggin 提交于
bd_start_claiming has an unbalanced module_put introduced in 6b4517a7. Signed-off-by: NNick Piggin <npiggin@suse.de> Acked-by: NTejun Heo <tj@kernel.org> Signed-off-by: NJens Axboe <jaxboe@fusionio.com>
-
- 28 5月, 2010 1 次提交
-
-
由 Nick Piggin 提交于
Convert simple filesystems: ramfs, configfs, sysfs, block_dev to new truncate sequence. Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: NNick Piggin <npiggin@suse.de> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-