- 19 3月, 2010 4 次提交
-
-
由 FUJITA Tomonori 提交于
The description says: Cause IO segments sent to a device for DMA to be merged virtually by the IOMMU when they happen to have been allocated contiguously. This doesn't add pressure to the IOMMU allocator. However, some drivers don't support getting large merged segments coming back from *_map_sg(). Most drivers don't have this problem; it is safe to say Y here. It's out of date. Long ago, drivers didn't have a way to tell IOMMUs about their segment length limit (that is, the maximum segment length that they can handle). So IOMMUs merged as many segments as possible and gave too large segments to drivers. dma_get_max_seg_size() was introduced to solve the above problem. Device drives can use the API to tell IOMMU about the maximum segment length that they can handle. In addition, the default limit (64K) should be safe for everyone. So this config option seems to be unnecessary. Note that this config option just enables users to disable the virtual merging by default. Users can still disable the virtual merging by the boot parameter. Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 FUJITA Tomonori 提交于
powerpc initializes swiotlb before parsing the kernel boot options so swiotlb options (e.g. specifying the swiotlb buffer size) are ignored. Any time before freeing bootmem works for swiotlb so this patch moves powerpc's swiotlb initialization after parsing the kernel boot options, mem_init (as x86 does). Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Tested-by: NBecky Bruce <beckyb@kernel.crashing.org> Tested-by: NAlbert Herranz <albert_herranz@yahoo.es> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Márton Németh 提交于
When printk() is disabled (CONFIG_PRINTK) at menu item General setup -> Configure standard kernel features (for small systems) -> Enable support for printk then there should be no printk() calls at all. Signed-off-by: NMárton Németh <nm127@freemail.hu> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Nathan Lynch 提交于
The powerpc implementations of syscall_get_error and syscall_set_return_value should use CCR0:S0 (0x10000000) for testing and setting syscall error status. Fortunately these APIs don't seem to be used at the moment. Signed-off-by: NNathan Lynch <ntl@pobox.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 18 3月, 2010 1 次提交
-
-
由 Grant Likely 提交于
mpc52xx_gpt_wdt_setup is defined as 0, which causes the following build failure with gcc 4.5, since it's built with -Werror. arch/powerpc/platforms/52xx/mpc52xx_gpt.c:761:3: error: statement with no effect Changing it to a static inline fixes the problem. Reported-by: NJeff Mahoney <jeffm@suse.com> Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
- 17 3月, 2010 2 次提交
-
-
由 Kumar Gala 提交于
We shouldn't be always setting 'M' in the TLB entry since its reasonable for somethings to be mapped non-coherent. The PTE should have 'M' set properly. Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Kumar Gala 提交于
e500v1/v2 based chips will treat any reserved field being set in an opcode as illegal. Thus always setting the hint in the opcode is a bad idea. Anton should be kept away from the powerpc opcode map. Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
- 13 3月, 2010 7 次提交
-
-
由 FUJITA Tomonori 提交于
This converts powerpc to use the generic pci_set_dma_mask and pci_set_consistent_dma_mask (drivers/pci/pci.c). The generic pci_set_dma_mask does what powerpc's pci_set_dma_mask does. Unlike powerpc's pci_set_consistent_dma_mask, the gneric pci_set_consistent_dma_mask sets only coherent_dma_mask. It doesn't work for powerpc? pci_set_consistent_dma_mask API should set only coherent_dma_mask? Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Greg KH <greg@kroah.com> Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 FUJITA Tomonori 提交于
All the architectures properly set NEED_DMA_MAP_STATE now so we can safely add linux/pci-dma.h to linux/pci.h and remove the linux/pci-dma.h inclusion in arch's asm/pci.h Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: NArnd Bergmann <arnd@arndb.de> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 FUJITA Tomonori 提交于
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Christoph Hellwig 提交于
While in theory user_enable_single_step/user_disable_single_step/ user_enable_blockstep could also be provided as an inline or macro there's no good reason to do so, and having the prototype in one places keeps code size and confusion down. Roland said: The original thought there was that user_enable_single_step() et al might well be only an instruction or three on a sane machine (as if we have any of those!), and since there is only one call site inlining would be beneficial. But I agree that there is no strong reason to care about inlining it. As to the arch changes, there is only one thought I'd add to the record. It was always my thinking that for an arch where PTRACE_SINGLESTEP does text-modifying breakpoint insertion, user_enable_single_step() should not be provided. That is, arch_has_single_step()=>true means that there is an arch facility with "pure" semantics that does not have any unexpected side effects. Inserting a breakpoint might do very unexpected strange things in multi-threaded situations. Aside from that, it is a peculiar side effect that user_{enable,disable}_single_step() should cause COW de-sharing of text pages and so forth. For PTRACE_SINGLESTEP, all these peculiarities are the status quo ante for that arch, so having arch_ptrace() itself do those is one thing. But for building other things in the future, it is nicer to have a uniform "pure" semantics that arch-independent code can expect. OTOH, all such arch issues are really up to the arch maintainer. As of today, there is nothing but ptrace using user_enable_single_step() et al so it's a distinction without a practical difference. If/when there are other facilities that use user_enable_single_step() and might care, the affected arch's can revisit the question when someone cares about the quality of the arch support for said new facility. Signed-off-by: NChristoph Hellwig <hch@lst.de> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Roland McGrath <roland@redhat.com> Acked-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Christoph Hellwig 提交于
Add generic implementations of the old and really old uname system calls. Note that sh only implements sys_olduname but not sys_oldolduname, but I'm not going to bother with another ifdef for that special case. m32r implemented an old uname but never wired it up, so kill it, too. Signed-off-by: NChristoph Hellwig <hch@lst.de> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Jeff Dike <jdike@addtoit.com> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: James Morris <jmorris@namei.org> Cc: Andreas Schwab <schwab@linux-m68k.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Christoph Hellwig 提交于
On an architecture that supports 32-bit compat we need to override the reported machine in uname with the 32-bit value. Instead of doing this separately in every architecture introduce a COMPAT_UTS_MACHINE define in <asm/compat.h> and apply it directly in sys_newuname(). Signed-off-by: NChristoph Hellwig <hch@lst.de> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Jeff Dike <jdike@addtoit.com> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: James Morris <jmorris@namei.org> Cc: Andreas Schwab <schwab@linux-m68k.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Christoph Hellwig 提交于
Add a generic implementation of the ipc demultiplexer syscall. Except for s390 and sparc64 all implementations of the sys_ipc are nearly identical. There are slight differences in the types of the parameters, where mips and powerpc as the only 64-bit architectures with sys_ipc use unsigned long for the "third" argument as it gets casted to a pointer later, while it traditionally is an "int" like most other paramters. frv goes even further and uses unsigned long for all parameters execept for "ptr" which is a pointer type everywhere. The change from int to unsigned long for "third" and back to "int" for the others on frv should be fine due to the in-register calling conventions for syscalls (we already had a similar issue with the generic sys_ptrace), but I'd prefer to have the arch maintainers looks over this in details. Except for that h8300, m68k and m68knommu lack an impplementation of the semtimedop sub call which this patch adds, and various architectures have gets used - at least on i386 it seems superflous as the compat code on x86-64 and ia64 doesn't even bother to implement it. [akpm@linux-foundation.org: add sys_ipc to sys_ni.c] Signed-off-by: NChristoph Hellwig <hch@lst.de> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Jeff Dike <jdike@addtoit.com> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Reviewed-by: NH. Peter Anvin <hpa@zytor.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: James Morris <jmorris@namei.org> Cc: Andreas Schwab <schwab@linux-m68k.org> Acked-by: NJesper Nilsson <jesper.nilsson@axis.com> Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk> Acked-by: NDavid Howells <dhowells@redhat.com> Acked-by: NKyle McMartin <kyle@mcmartin.ca> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 11 3月, 2010 2 次提交
-
-
由 Peter Zijlstra 提交于
Fix: arch/powerpc/kernel/perf_event.c:1334: error: 'power_pmu_notifier' undeclared (first use in this function) arch/powerpc/kernel/perf_event.c:1334: error: (Each undeclared identifier is reported only once arch/powerpc/kernel/perf_event.c:1334: error: for each function it appears in.) arch/powerpc/kernel/perf_event.c:1334: error: implicit declaration of function 'power_pmu_notifier' arch/powerpc/kernel/perf_event.c:1334: error: implicit declaration of function 'register_cpu_notifier' Due to commit 3f6da390 (perf: Rework and fix the arch CPU-hotplug hooks). Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Grant Likely 提交于
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
- 10 3月, 2010 2 次提交
-
-
由 Peter Zijlstra 提交于
Remove the hw_perf_event_*() hotplug hooks in favour of per PMU hotplug notifiers. This has the advantage of reducing the static weak interface as well as exposing all hotplug actions to the PMU. Use this to fix x86 hotplug usage where we did things in ONLINE which should have been done in UP_PREPARE or STARTING. Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mundt <lethal@linux-sh.org> Cc: paulus@samba.org Cc: eranian@google.com Cc: robert.richter@amd.com Cc: fweisbec@gmail.com Cc: Arnaldo Carvalho de Melo <acme@infradead.org> LKML-Reference: <20100305154128.736225361@chello.nl> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Peter Zijlstra 提交于
This makes it easier to extend perf_sample_data and fixes a bug on arm and sparc, which failed to set ->raw to NULL, which can cause crashes when combined with PERF_SAMPLE_RAW. It also optimizes PowerPC and tracepoint, because the struct initialization is forced to zero out the whole structure. Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: NJean Pihet <jpihet@mvista.com> Reviewed-by: NFrederic Weisbecker <fweisbec@gmail.com> Acked-by: NDavid S. Miller <davem@davemloft.net> Cc: Jamie Iles <jamie.iles@picochip.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Stephane Eranian <eranian@google.com> Cc: stable@kernel.org LKML-Reference: <20100304140100.315416040@chello.nl> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 09 3月, 2010 8 次提交
-
-
由 Dave Kleikamp 提交于
Another fix for the extended ptrace patches in the -next tree. The handling of breakpoints and watchpoints is inconsistent. When a breakpoint or watchpoint is hit, the interrupt handler is clearing the proper bits in the dbcr* registers, but leaving the dac* and iac* registers alone. The ptrace code to delete the break/watchpoints checks the dac* and iac* registers for zero to determine if they are enabled. Instead, they should check the dbcr* bits. Signed-off-by: NDave Kleikamp <shaggy@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Vaidyanathan Srinivasan 提交于
Remove debug printks in pseries_mach_cpu_die(). These are noisy at runtime. Traceevents can be added to instrument this section of code. The following KERN_INFO printks are removed: cpu 62 (hwid 62) returned from cede. Decrementer value = b2802fff Timebase value = 2fa8f95035f4a cpu 62 (hwid 62) got prodded to go online cpu 58 (hwid 58) ceding for offline with hint 2 Signed-off-by: NVaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Cc: Gautham R Shenoy <ego@in.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Vaidyanathan Srinivasan 提交于
Rearrange condition checks for better code readability and prevention of possible race conditions when preferred_offline_state can potentially change during the execution of pseries_mach_cpu_die(). The patch will make pseries_mach_cpu_die() put cpu in one of the consistent states and not hit the run over BUG() Signed-off-by: NVaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Cc: Gautham R Shenoy <ego@in.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Vaidyanathan Srinivasan 提交于
Cpu hotplug (offline) without dlpar operation will place cpu in cede state and the extended_cede_processor() function will return when resumed. Kernel stack pointer needs to be reset before start_secondary() is called to continue the online operation. Added new function start_secondary_resume() to do the above steps. Signed-off-by: NVaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Cc: Gautham R Shenoy <ego@in.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Mark Nelson 提交于
Now that we properly keep track of the CPPR value (since 49bd3647, "powerpc/pseries: Track previous CPPR values to correctly EOI interrupts") we can pass it to the H_XIRR hcall. This is needed because the Partition Adjunct Option of new versions of pHyp extend the H_XIRR hcall to include the CPPR as an input parameter. Earlier versions not supporting this option just disregard the extra input parameter, so this doesn't cause any problems for existing systems. The Partition Adjunct Option is required for future systems that will support SR-IOV capable devices. Signed-off-by: NMark Nelson <markn@au1.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Dave Kleikamp 提交于
powerpc/booke: Fix a couple typos in the advanced ptrace code Found and fixed a couple typos in the advanced ptrace patches. (These patches are currently in benh's next tree.) Signed-off-by: NDave Kleikamp <shaggy@linux.vnet.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: linuxppc-dev list <Linuxppc-dev@ozlabs.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Adam Lackorzynski 提交于
Compiling 2.6.33 with SMP enabled and HOTPLUG_CPU disabled gives me the following link errors: LD init/built-in.o LD .tmp_vmlinux1 arch/powerpc/platforms/built-in.o: In function `.smp_xics_setup_cpu': smp.c:(.devinit.text+0x88): undefined reference to `.set_cpu_current_state' smp.c:(.devinit.text+0x94): undefined reference to `.set_default_offline_state' arch/powerpc/platforms/built-in.o: In function `.smp_pSeries_kick_cpu': smp.c:(.devinit.text+0x13c): undefined reference to `.set_preferred_offline_state' smp.c:(.devinit.text+0x148): undefined reference to `.get_cpu_current_state' smp.c:(.devinit.text+0x1a8): undefined reference to `.get_cpu_current_state' make: *** [.tmp_vmlinux1] Error 1 The following change fixes that for me and seems to work as expected. Signed-off-by: NAdam Lackorzynski <adam@os.inf.tu-dresden.de> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Michael Ellerman 提交于
On 64-bit kernels we currently have a 512 byte struct paca_struct for each cpu (usually just called "the paca"). Currently they are statically allocated, which means a kernel built for a large number of cpus will waste a lot of space if it's booted on a machine with few cpus. We can avoid that by only allocating the number of pacas we need at boot. However this is complicated by the fact that we need to access the paca before we know how many cpus there are in the system. The solution is to dynamically allocate enough space for NR_CPUS pacas, but then later in boot when we know how many cpus we have, we free any unused pacas. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 08 3月, 2010 1 次提交
-
-
由 Emese Revfy 提交于
Constify struct sysfs_ops. This is part of the ops structure constification effort started by Arjan van de Ven et al. Benefits of this constification: * prevents modification of data that is shared (referenced) by many other structure instances at runtime * detects/prevents accidental (but not intentional) modification attempts on archs that enforce read-only kernel data at runtime * potentially better optimized code as the compiler can assume that the const data cannot be changed * the compiler/linker move const data into .rodata and therefore exclude them from false sharing Signed-off-by: NEmese Revfy <re.emese@gmail.com> Acked-by: NDavid Teigland <teigland@redhat.com> Acked-by: NMatt Domsch <Matt_Domsch@dell.com> Acked-by: NMaciej Sosnowski <maciej.sosnowski@intel.com> Acked-by: NHans J. Koch <hjk@linutronix.de> Acked-by: NPekka Enberg <penberg@cs.helsinki.fi> Acked-by: NJens Axboe <jens.axboe@oracle.com> Acked-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 07 3月, 2010 2 次提交
-
-
由 Wim Van Sebroeck 提交于
make the watchdog_info struct const where possible. Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
-
由 H Hartley Sweeten 提交于
The macro any_online_node() is prone to producing sparse warnings due to the local symbol 'node'. Since all the in-tree users are really requesting the first online node (the mask argument is either NODE_MASK_ALL or node_online_map) just use the first_online_node macro and remove the any_online_node macro since there are no users. Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: NDavid Rientjes <rientjes@google.com> Reviewed-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Lee Schermerhorn <lee.schermerhorn@hp.com> Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Dave Hansen <dave@linux.vnet.ibm.com> Cc: Milton Miller <miltonm@bga.com> Cc: Nathan Fontenot <nfont@austin.ibm.com> Cc: Geoff Levand <geoffrey.levand@am.sony.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: J. Bruce Fields <bfields@fieldses.org> Cc: Neil Brown <neilb@suse.de> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: David S. Miller <davem@davemloft.net> Cc: Benny Halevy <bhalevy@panasas.com> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Ricardo Labiaga <Ricardo.Labiaga@netapp.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 05 3月, 2010 8 次提交
-
-
由 Scott Wood 提交于
This implements perf_event support for the Freescale embedded performance monitor, based on the existing perf_event.c that supports server/classic chips. Some limitations: - Performance monitor interrupts are regular EE interrupts, and thus you can't profile places with interrupts disabled. We may want to implement soft IRQ-disabling, with perfmon interrupts exempted and treated as NMIs. - When trying to schedule multiple event groups at once, and using restricted events, situations could arise where scheduling fails even though it would be possible. Consider three groups, each with two events. One group has restricted events, the others don't. The two non-restricted groups are scheduled, then one is removed, which happens to occupy the two counters that can't do restricted events. The remaining non-restricted group will not be moved to the non-restricted-capable counters to make room if the restricted group tries to be scheduled. Signed-off-by: NScott Wood <scottwood@freescale.com> Acked-by: NPaul Mackerras <paulus@samba.org> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Scott Wood 提交于
It's also useful for software events, as well as future support for other types of hardware counters. Signed-off-by: NScott Wood <scottwood@freescale.com> Acked-by: NPaul Mackerras <paulus@samba.org> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Andrea Gelmini 提交于
arch/powerpc/sysdev/cpm2_pic.h:6: ERROR: "(foo*)" should be "(foo *)" Signed-off-by: NAndrea Gelmini <andrea.gelmini@gelma.net> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Martyn Welch 提交于
This patch renames GE Fanuc boards following the split-up of the GE Fanuc joint venture. These boards are now made by GE Intelligent platorms. Signed-off-by: NMartyn Welch <martyn.welch@gefanuc.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Anton Vorontsov 提交于
Interrupt controllers' hooks are executed in the atomic context, so they are not permitted to sleep (with RT kernels non-raw spinlocks are sleepable). So, gef_pic_lock has to be a real (non-sleepable) spinlock. Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com> Acked-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Anton Vorontsov 提交于
Interrupt controllers' hooks are executed in the atomic context, so they are not permitted to sleep (with RT kernels non-raw spinlocks are sleepable). So, qe_ic_lock has to be a real (non-sleepable) spinlock. Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com> Acked-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Anton Vorontsov 提交于
Interrupt controllers' hooks are executed in the atomic context, so they are not permitted to sleep (with RT kernels non-raw spinlocks are sleepable). So, pci_pic_lock has to be a real (non-sleepable) spinlock. Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com> Acked-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Anton Vorontsov 提交于
Interrupt controllers' hooks are executed in the atomic context, so they are not permitted to sleep (with RT kernels non-raw spinlocks are sleepable). So, socrates_fpga_pic_lock has to be a real (non-sleepable) spinlock. Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com> Acked-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
- 01 3月, 2010 3 次提交
-
-
由 Liu Yu 提交于
Old method prematurely sets ESR and DEAR. Move this part after we decide to inject interrupt, which is more like hardware behave. Signed-off-by: NLiu Yu <yu.liu@freescale.com> Acked-by: NHollis Blanchard <hollis@penguinppc.org> Acked-by: NAlexander Graf <agraf@suse.de> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Liu Yu 提交于
commit 55fb1027c1cf9797dbdeab48180da530e81b1c39 doesn't update tlbcfg correctly. Fix it. And since guest OS likes 'fixed' hardware, initialize tlbcfg everytime when guest access is useless. So move this part to init code. Signed-off-by: NLiu Yu <yu.liu@freescale.com> Acked-by: NAlexander Graf <agraf@suse.de> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Liu Yu 提交于
commit 513579e3 change the way we emulate PVR/PIR, which left PVR/PIR uninitialized on E500, and make guest puzzled. Signed-off-by: NLiu Yu <yu.liu@freescale.com> Acked-by: NAlexander Graf <agraf@suse.de> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-