In some device trees of previous version, there were string "fsl,sec4.0".
To be backward compatible with device trees, we first check "fsl,sec-v4.0",
if it fails, then check for "fsl,sec4.0".
Signed-off-by: NShengzhou Liu <Shengzhou.Liu@freescale.com>

extended to include new hash and rng code, which was omitted from
the previous version of this patch during a rebase of the SDK
version.
Signed-off-by: NKim Phillips <kim.phillips@freescale.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

commit "crypto: caam - use non-irq versions of spinlocks for job rings"
made two bad assumptions:

(a) The caam_jr_enqueue lock isn't used in softirq context.
Not true: jr_enqueue can be interrupted by an incoming net
interrupt and the received packet may be sent for encryption,
via caam_jr_enqueue in softirq context, thereby inducing a
deadlock.

This is evidenced when running netperf over an IPSec tunnel
between two P4080's, with spinlock debugging turned on:

[  892.092569] BUG: spinlock lockup on CPU#7, netperf/10634, e8bf5f70
[  892.098747] Call Trace:
[  892.101197] [eff9fc10] [c00084c0] show_stack+0x48/0x15c (unreliable)
[  892.107563] [eff9fc50] [c0239c2c] do_raw_spin_lock+0x16c/0x174
[  892.113399] [eff9fc80] [c0596494] _raw_spin_lock+0x3c/0x50
[  892.118889] [eff9fc90] [c0445e74] caam_jr_enqueue+0xf8/0x250
[  892.124550] [eff9fcd0] [c044a644] aead_decrypt+0x6c/0xc8
[  892.129625] BUG: spinlock lockup on CPU#5, swapper/5/0, e8bf5f70
[  892.129629] Call Trace:
[  892.129637] [effa7c10] [c00084c0] show_stack+0x48/0x15c (unreliable)
[  892.129645] [effa7c50] [c0239c2c] do_raw_spin_lock+0x16c/0x174
[  892.129652] [effa7c80] [c0596494] _raw_spin_lock+0x3c/0x50
[  892.129660] [effa7c90] [c0445e74] caam_jr_enqueue+0xf8/0x250
[  892.129666] [effa7cd0] [c044a644] aead_decrypt+0x6c/0xc8
[  892.129674] [effa7d00] [c0509724] esp_input+0x178/0x334
[  892.129681] [effa7d50] [c0519778] xfrm_input+0x77c/0x818
[  892.129688] [effa7da0] [c050e344] xfrm4_rcv_encap+0x20/0x30
[  892.129697] [effa7db0] [c04b90c8] ip_local_deliver+0x190/0x408
[  892.129703] [effa7de0] [c04b966c] ip_rcv+0x32c/0x898
[  892.129709] [effa7e10] [c048b998] __netif_receive_skb+0x27c/0x4e8
[  892.129715] [effa7e80] [c048d744] netif_receive_skb+0x4c/0x13c
[  892.129726] [effa7eb0] [c03c28ac] _dpa_rx+0x1a8/0x354
[  892.129732] [effa7ef0] [c03c2ac4] ingress_rx_default_dqrr+0x6c/0x108
[  892.129742] [effa7f10] [c0467ae0] qman_poll_dqrr+0x170/0x1d4
[  892.129748] [effa7f40] [c03c153c] dpaa_eth_poll+0x20/0x94
[  892.129754] [effa7f60] [c048dbd0] net_rx_action+0x13c/0x1f4
[  892.129763] [effa7fa0] [c003d1b8] __do_softirq+0x108/0x1b0
[  892.129769] [effa7ff0] [c000df58] call_do_softirq+0x14/0x24
[  892.129775] [ebacfe70] [c0004868] do_softirq+0xd8/0x104
[  892.129780] [ebacfe90] [c003d5a4] irq_exit+0xb8/0xd8
[  892.129786] [ebacfea0] [c0004498] do_IRQ+0xa4/0x1b0
[  892.129792] [ebacfed0] [c000fad8] ret_from_except+0x0/0x18
[  892.129798] [ebacff90] [c0009010] cpu_idle+0x94/0xf0
[  892.129804] [ebacffb0] [c059ff88] start_secondary+0x42c/0x430
[  892.129809] [ebacfff0] [c0001e28] __secondary_start+0x30/0x84
[  892.281474]
[  892.282959] [eff9fd00] [c0509724] esp_input+0x178/0x334
[  892.288186] [eff9fd50] [c0519778] xfrm_input+0x77c/0x818
[  892.293499] [eff9fda0] [c050e344] xfrm4_rcv_encap+0x20/0x30
[  892.299074] [eff9fdb0] [c04b90c8] ip_local_deliver+0x190/0x408
[  892.304907] [eff9fde0] [c04b966c] ip_rcv+0x32c/0x898
[  892.309872] [eff9fe10] [c048b998] __netif_receive_skb+0x27c/0x4e8
[  892.315966] [eff9fe80] [c048d744] netif_receive_skb+0x4c/0x13c
[  892.321803] [eff9feb0] [c03c28ac] _dpa_rx+0x1a8/0x354
[  892.326855] [eff9fef0] [c03c2ac4] ingress_rx_default_dqrr+0x6c/0x108
[  892.333212] [eff9ff10] [c0467ae0] qman_poll_dqrr+0x170/0x1d4
[  892.338872] [eff9ff40] [c03c153c] dpaa_eth_poll+0x20/0x94
[  892.344271] [eff9ff60] [c048dbd0] net_rx_action+0x13c/0x1f4
[  892.349846] [eff9ffa0] [c003d1b8] __do_softirq+0x108/0x1b0
[  892.355338] [eff9fff0] [c000df58] call_do_softirq+0x14/0x24
[  892.360910] [e7169950] [c0004868] do_softirq+0xd8/0x104
[  892.366135] [e7169970] [c003d5a4] irq_exit+0xb8/0xd8
[  892.371101] [e7169980] [c0004498] do_IRQ+0xa4/0x1b0
[  892.375979] [e71699b0] [c000fad8] ret_from_except+0x0/0x18
[  892.381466] [e7169a70] [c0445e74] caam_jr_enqueue+0xf8/0x250
[  892.387127] [e7169ab0] [c044ad4c] aead_givencrypt+0x6ac/0xa70
[  892.392873] [e7169b20] [c050a0b8] esp_output+0x2b4/0x570
[  892.398186] [e7169b80] [c0519b9c] xfrm_output_resume+0x248/0x7c0
[  892.404194] [e7169bb0] [c050e89c] xfrm4_output_finish+0x18/0x28
[  892.410113] [e7169bc0] [c050e8f4] xfrm4_output+0x48/0x98
[  892.415427] [e7169bd0] [c04beac0] ip_local_out+0x48/0x98
[  892.420740] [e7169be0] [c04bec7c] ip_queue_xmit+0x16c/0x490
[  892.426314] [e7169c10] [c04d6128] tcp_transmit_skb+0x35c/0x9a4
[  892.432147] [e7169c70] [c04d6f98] tcp_write_xmit+0x200/0xa04
[  892.437808] [e7169cc0] [c04c8ccc] tcp_sendmsg+0x994/0xcec
[  892.443213] [e7169d40] [c04eebfc] inet_sendmsg+0xd0/0x164
[  892.448617] [e7169d70] [c04792f8] sock_sendmsg+0x8c/0xbc
[  892.453931] [e7169e40] [c047aecc] sys_sendto+0xc0/0xfc
[  892.459069] [e7169f10] [c047b934] sys_socketcall+0x110/0x25c
[  892.464729] [e7169f40] [c000f480] ret_from_syscall+0x0/0x3c

(b) since the caam_jr_dequeue lock is only used in bh context,
then semantically it should use _bh spin_lock types.  spin_lock_bh
semantics are to disable back-halves, and used when a lock is shared
between softirq (bh) context and process and/or h/w IRQ context.
Since the lock is only used within softirq context, and this tasklet
is atomic, there is no need to do the additional work to disable
back halves.

This patch adds back-half disabling protection to caam_jr_enqueue
spin_locks to fix (a), and drops it from caam_jr_dequeue to fix (b).
Signed-off-by: NKim Phillips <kim.phillips@freescale.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Initialization of cra_list is currently mixed, most ciphers initialize this
field and most shashes do not. Initialization however is not needed at all
since cra_list is initialized/overwritten in __crypto_register_alg() with
list_add(). Therefore perform cleanup to remove all unneeded initializations
of this field in 'crypto/drivers/'.

Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: linux-geode@lists.infradead.org
Cc: Michal Ludvig <michal@logix.cz>
Cc: Dmitry Kasatkin <dmitry.kasatkin@nokia.com>
Cc: Varun Wadekar <vwadekar@nvidia.com>
Cc: Eric Bénard <eric@eukrea.com>
Signed-off-by: NJussi Kivilinna <jussi.kivilinna@mbnet.fi>
Acked-by: NKent Yoder <key@linux.vnet.ibm.com>
Acked-by: NVladimir Zapolskiy <vladimir_zapolskiy@mentor.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The clk patches added code to get and enable clocks in the
respective driver probe functions.  If the probe function failed
for some reason after enabling the clock, the clock was not
disabled again in many cases.
Signed-off-by: NSimon Baatz <gmbnomis@gmail.com>
Signed-off-by: NAndrew Lumm <andrew@lunn.ch>

With the changes in the random tree, IRQF_SAMPLE_RANDOM is now a
no-op; interrupt randomness is now collected unconditionally in a very
low-overhead fashion; see commit 775f4b29.  The IRQF_SAMPLE_RANDOM
flag was scheduled to be removed in 2009 on the
feature-removal-schedule, so this patch is preparation for the final
removal of this flag.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
Acked-by: NHerbert Xu <herbert@gondor.apana.org.au>

With this, now all combinations of
CBC: AES, 3DES-EDE
with
HMAC: SHA-1, SHA-224, SHA-256, SHA-384, SHA-512
are supported.
Signed-off-by: NHoria Geanta <horia.geanta@freescale.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch exports the talitos_submit function so that on
need basis same can be used by other entities.
Signed-off-by: NSandeep Malik <Sandeep.Malik@freescale.com>
Signed-off-by: NKim Phillips <kim.phillips@freescale.com>
Signed-off-by: NHoria Geanta <horia.geanta@freescale.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch moves the talitos structure definitions from c file to its
header file so that the same can be shared on need basis.
Signed-off-by: NSandeep Malik <Sandeep.Malik@freescale.com>
Signed-off-by: NKim Phillips <kim.phillips@freescale.com>
Signed-off-by: NHoria Geanta <horia.geanta@freescale.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Signed-off-by: NNicolas Royer <nicolas@eukrea.com>
Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: NEric Bénard <eric@eukrea.com>
Tested-by: NEric Bénard <eric@eukrea.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Signed-off-by: NNicolas Royer <nicolas@eukrea.com>
Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: NEric Bénard <eric@eukrea.com>
Tested-by: NEric Bénard <eric@eukrea.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Signed-off-by: NNicolas Royer <nicolas@eukrea.com>
Acked-by: NNicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: NEric Bénard <eric@eukrea.com>
Tested-by: NEric Bénard <eric@eukrea.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch adds support for retrieving and printing of
SEC ERA information. It is useful for knowing beforehand
what features exist from the SEC point of view on a
certain SoC. Only era-s 1 to 4 are currently supported;
other eras will appear as unknown.
Signed-off-by: NAlex Porosanu <alexandru.porosanu@freescale.com>

- rebased onto current cryptodev master
- made caam_eras static
Signed-off-by: NKim Phillips <kim.phillips@freescale.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The caam job rings (input/output job ring) are allocated using
dma_map_single(). These job rings can be visualized as the ring
buffers in which the jobs are en-queued/de-queued. The s/w enqueues
the jobs in input job ring which h/w dequeues and after processing
it copies the jobs in output job ring. Software then de-queues the
job from output ring. Using dma_map/unmap_single() is not preferred
way to allocate memory for this type of requirements because this
adds un-necessary complexity.

Example, if bounce buffer (SWIOTLB) will get used then to make any
change visible in this memory to other processing unit requires
dmap_unmap_single() or dma_sync_single_for_cpu/device(). The
dma_unmap_single() can not be used as this will free the bounce
buffer, this will require changing the job rings on running system
and I seriously doubt that it will be not possible or very complex
to implement. Also using dma_sync_single_for_cpu/device() will also
add unnecessary complexity.

The simple and preferred way is using dma_alloc_coherent() for these
type of memory requirements.

This resolves the Linux boot crash issue when "swiotlb=force" is set
in bootargs on systems which have memory more than 4G.
Signed-off-by: NBharat Bhushan <bharat.bhushan@freescale.com>
Acked-by: NKim Phillips <kim.phillips@freescale.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Make the ux500 crypto driver define its PM callbacks through
struct dev_pm_ops objects rather than by using legacy PM hooks
in struct platform_driver.
Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>

there is no noticeable benefit for multiple cores to process one
job ring's output ring: in fact, we can benefit from cache effects
of having the back-half stay on the core that receives a particular
ring's interrupts, and further relax general contention and the
locking involved with reading outring_used, since tasklets run
atomically.
Signed-off-by: NKim Phillips <kim.phillips@freescale.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Memory barriers are implied by the i/o register write implementation
(at least on Power).  So we can remove the redundant wmb() in
caam_jr_enqueue, and, in dequeue(), hoist the h/w done notification
write up to before we need to increment the head of the ring, and
save an smp_mb.
Signed-off-by: NKim Phillips <kim.phillips@freescale.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Code was needlessly checking the s/w job ring when there
would be nothing to process if the h/w's output completion
ring were empty anyway.
Signed-off-by: NKim Phillips <kim.phillips@freescale.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The enqueue lock isn't used in any interrupt context, and
the dequeue lock isn't used in the h/w interrupt context,
only in bh context.
Signed-off-by: NKim Phillips <kim.phillips@freescale.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

It has been observed that in zero-loss benchmarks, when a
slow traffic rate is being tested, the IRQ timer coalescing
parameter was set too high, and the ethernet controller
would start dropping packets because the job ring back half
wouldn't be executed in time before the ethernet controller
would fill its buffers, thereby significantly reducing the
zero-loss performance figures.

Empirical testing has shown that the best zero-loss performance
is achieved when IRQ coalescing is set to minimum values and/or
turned off, since apparently the job ring driver already implements
an adequately-performing general-purpose IRQ mitigation strategy
in software.

Whilst we could go with minimal count (2-8) and timing settings
(192-256), we prefer just turning h/w coalescing altogether off
to minimize setkey latency (due to split key generation), and
for consistent cross-SoC performance (the SEC vs. core clock
ratio changes).
Signed-off-by: NKim Phillips <kim.phillips@freescale.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The SEC v4.x' RNGB h/w block self-initialized.  RNG4, available
on SEC versions 5 and beyond, is based on a different standard
that requires manual initialization.

Also update any new errors From the SEC v5.2 reference manual:
The SEC v5.2's RNG4 unit reuses some error IDs, thus the addition
of rng_err_id_list over the CHA-independent err_id_list.
Signed-off-by: NKim Phillips <kim.phillips@freescale.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

SEC v4.x were only 36-bit, SEC v5+ are 40-bit capable.
Also set a DMA mask for any job ring devices created.
Signed-off-by: NKim Phillips <kim.phillips@freescale.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

caam_read copies random bytes from two buffers into output.

caam rng can fill empty buffer 0xffff bytes at a time,
but the buffer sizes are rounded down to multiple of cacheline size.
Signed-off-by: NYuan Kang <Yuan.Kang@freescale.com>
Signed-off-by: NKim Phillips <kim.phillips@freescale.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

support chained scatterlists for aead, ablkcipher and ahash.
Signed-off-by: NYuan Kang <Yuan.Kang@freescale.com>

- fix dma unmap leak
- un-unlikely src == dst, due to experience with AF_ALG
Signed-off-by: NKudupudi Ugendreshwar <B38865@freescale.com>
Signed-off-by: NKim Phillips <kim.phillips@freescale.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

caam supports and registers unkeyed sha algorithms and md5.
Signed-off-by: NYuan Kang <Yuan.Kang@freescale.com>
Signed-off-by: NKim Phillips <kim.phillips@freescale.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

caam supports ahash hmac with sha algorithms and md5.
Signed-off-by: NYuan Kang <Yuan.Kang@freescale.com>
Signed-off-by: NKim Phillips <kim.phillips@freescale.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

- rename scatterlist and link_tbl functions
- link_tbl changed to sec4_sg
- sg_to_link_tbl_one changed to dma_to_sec4_sg_one,
  since no scatterlist is use
Signed-off-by: NYuan Kang <Yuan.Kang@freescale.com>
Signed-off-by: NKim Phillips <kim.phillips@freescale.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

create separate files for split key generation and scatterlist functions.
Signed-off-by: NYuan Kang <Yuan.Kang@freescale.com>
Signed-off-by: NKim Phillips <kim.phillips@freescale.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

remove caam_jr_register and caam_jr_deregister
to allow sharing of job rings.
Signed-off-by: NYuan Kang <Yuan.Kang@freescale.com>
Signed-off-by: NKim Phillips <kim.phillips@freescale.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

functions for external storage of seq in/out lengths,
i.e., for 32-bit lengths.

These type-dependent functions automatically determine whether to
store the length internally (embedded in the command header word) or
externally (after the address pointer), based on size of the type
given.
Signed-off-by: NYuan Kang <Yuan.Kang@freescale.com>
Signed-off-by: NKim Phillips <kim.phillips@freescale.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Add a PDB header file to support building protocol descriptors.
Signed-off-by: NSteve Cornelius <sec@pobox.com>
Signed-off-by: NHemant Agrawal <hemant@freescale.com>
Signed-off-by: NKim Phillips <kim.phillips@freescale.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

init_desc, by always ORing with 1 for the descriptor header inclusion
into the descriptor length, and init_sh_desc_pdb, by always specifying
the descriptor length modification for the PDB via options, would not
allow for odd length PDBs to be embedded in the constructed descriptor
length.  Fix this by simply changing the OR to an addition.

also round-up pdb_bytes to the next SEC command unit size, to
allow for, e.g., optional packet header bytes that aren't a
multiple of CAAM_CMD_SZ.
Reported-by: NRadu-Andrei BULIE <radu.bulie@freescale.com>
Signed-off-by: NKim Phillips <kim.phillips@freescale.com>
Cc: Yashpal Dutta <yashpal.dutta@freescale.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

In case of protocol acceleration descriptors, Shared descriptor header must
carry size of header length + PDB length in words which will be skipped by
DECO while processing descriptor to provide first command word offset
Signed-off-by: NYashpal Dutta <yashpal.dutta@freescale.com>
Signed-off-by: NKim Phillips <kim.phillips@freescale.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

SEC4 h/w gets configured in 32- vs. 36-bit physical
addressing modes depending on the size of dma_addr_t,
which is not always equal to sizeof(u32 *).

Also fixed alignment of a dma_unmap call whilst in there.
Signed-off-by: NKim Phillips <kim.phillips@freescale.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

presumably leftovers from possible macro development.
Signed-off-by: NKim Phillips <kim.phillips@freescale.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Signed-off-by: NSeth Jennings <sjenning@linux.vnet.ibm.com>
Acked-by: NKent Yoder <key@linux.vnet.ibm.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

When the nx driver was pulled, the Makefile that actually
builds it is arch/powerpc/Makefile. This is unnatural.

This patch moves the line that builds the nx driver from
arch/powerpc/Makefile to drivers/crypto/Makefile where it
belongs.
Signed-off-by: NSeth Jennings <sjenning@linux.vnet.ibm.com>
Acked-by: NKent Yoder <key@linux.vnet.ibm.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Use clk_prepare/clk_unprepare as required by the generic clk framework.
Signed-off-by: NPrashant Gaikwad <pgaikwad@nvidia.com>
Signed-off-by: NStephen Warren <swarren@nvidia.com>
Acked-by: NHerbert Xu <herbert@gondor.apana.org.au>

Since mv_hash_final_fallback() uses ctx->state, read out the digest
state register before calling it.
Signed-off-by: NPhil Sutter <phil.sutter@viprinet.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Signed-off-by: NPhil Sutter <phil.sutter@viprinet.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The timer triggers when 500ms have gone by after triggering the engine
and no completion interrupt was received. The callback then tries to
sanitise things as well as possible.
Signed-off-by: NPhil Sutter <phil.sutter@viprinet.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>