vdso vgetns() didn't mask the time source offset calculation, which
could lead to time problems with 32bit HPET.  Add the masking.

Thanks to Chuck Ebbert for tracking this down.
Signed-off-by: NAndi Kleen <ak@suse.de>
Cc: Chuck Ebbert <cebbert@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.o-hand.com/linux-rpurdie-leds:
  leds: Add missing include for leds.h

Commit f629307c introduced uses of
kernel_termios_to_user_termios_1 and user_termios_to_kernel_termios_1
on all architectures.  However, powerpc, s390, avr32 and frv don't
currently define those functions since their termios struct didn't
need to be changed when the arbitrary baud rate stuff was added, and
thus the kernel won't currently build on those architectures.

This adds definitions of kernel_termios_to_user_termios_1 and
user_termios_to_kernel_termios_1 to include/asm-generic/termios.h
which are identical to kernel_termios_to_user_termios and
user_termios_to_kernel_termios respectively.  The definitions are the
same because the "old" termios and "new" termios are in fact the same
on these architectures (which are the same ones that use
asm-generic/termios.h).
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alan Cox <alan@redhat.com>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
  [BLUETOOTH]: Fix non-COMPAT build of hci_sock.c

* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6:
  [SPARC64]: Fix booting on V100 systems.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: usbtouchscreen - correctly set 'phys'
  Input: i8042 - add HP Pavilion DV4270ca to the MUX blacklist
  Input: i8042 - fix modpost warning
  Input: add more Braille keycodes

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

On the root PCI bus, the OBP device tree lists device 3 twice.
Once as 'pm' and once as 'lomp'.

Everything goes downhill from there.

Ignore the second instance to workaround this.

Thanks to Kövedi_Krisztián for the bug report and
testing the fix.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2:
  ocfs2: Fix calculation of i_blocks during truncate
  [PATCH] ocfs2: Fix a wrong cluster calculation.
  [PATCH] ocfs2: fix mount option parsing
  ocfs2: update docs for new features

SERIAL_BFIN=m or SERIAL_MUX=m shouldn't allow SERIAL_CORE_CONSOLE=y.

Additionally, this patch fixes whitespace instead of tabs at the
SERIAL_MUX_CONSOLE option.
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Cc: Bryan Wu <bryan.wu@analog.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Intel framebuffer mis-calculated pixel clocks.

The pixel clock (and thus both H and V sync) will be slower than requested, so
if you set the minimum allowed the display may not sync.  In case of really
old CRT display it could theoretically damage it.

I'm using it with PAL TV (using RGB input - SCART connector) and the bug
prevented it from working at all (TV requirements are more strict and made the
bug visible).
Signed-off-by: NKrzysztof Halasa <khc@pm.waw.pl>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This was posted on Aug 28 and fixes an issue that could cause troubles
when slab caches >=128k are created.

http://marc.info/?l=linux-mm&m=118798149918424&w=2

Currently we simply add the debug flags unconditional when checking for a
matching slab.  This creates issues for sysfs processing when slabs exist
that are exempt from debugging due to their huge size or because only a
subset of slabs was selected for debugging.

We need to only add the flags if kmem_cache_open() would also add them.

Create a function to calculate the flags that would be set
if the cache would be opened and use that function to determine
the flags before looking for a compatible slab.

[akpm@linux-foundation.org: fixlets]
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Cc: Chuck Ebbert <cebbert@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Revert

	commit 656dad31
	Author: Ingo Molnar <mingo@elte.hu>
	Date:   Sat Feb 10 01:46:36 2007 -0800

	[PATCH] highmem: catch illegal nesting

	Catch illegally nested kmap_atomic()s even if the page that is mapped by
	the 'inner' instance is from lowmem.

	This avoids spuriously zapped kmap-atomic ptes and turns hard to find
	crashes into clear asserts at the bug site.

Problem is, a get_zeroed_page(GFP_KERNEL) from interrupt context will trigger
this check if non-irq code on this CPU holds a KM_USER0 mapping.  But that
get_zeroed_page() will never be altering the kmap slot anyway due to the
GFP_KERNEL.

Cc: Christoph Lameter <clameter@sgi.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Seems to me that this timer will only get started on platforms that say
they don't want it?
Signed-off-by: NTony Breeds <tony@bakeyournoodle.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Gabriel Paubert <paubert@iram.es>
Cc: Zachary Amsden <zach@vmware.com>
Acked-by: NThomas Gleixner <tglx@linutronix.de>
Cc: John Stultz <johnstul@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The inode->i_flock list contains the leases, flocks and posix
locks in the specified order. However, the flocks are added in
the head of this list thus hiding the leases from F_GETLEASE
command, from time_out_leases() and other code that expects
the leases to come first.

The following example will demonstrate this:

#define _GNU_SOURCE

#include <unistd.h>
#include <fcntl.h>
#include <stdio.h>
#include <sys/file.h>

static void show_lease(int fd)
{
        int res;

        res = fcntl(fd, F_GETLEASE);
        switch (res) {
                case F_RDLCK:
                        printf("Read lease\n");
                        break;
                case F_WRLCK:
                        printf("Write lease\n");
                        break;
                case F_UNLCK:
                        printf("No leases\n");
                        break;
                default:
                        printf("Some shit\n");
                        break;
        }
}

int main(int argc, char **argv)
{
        int fd, res;

        fd = open(argv[1], O_RDONLY);
        if (fd == -1) {
                perror("Can't open file");
                return 1;
        }

        res = fcntl(fd, F_SETLEASE, F_WRLCK);
        if (res == -1) {
                perror("Can't set lease");
                return 1;
        }

        show_lease(fd);

        if (flock(fd, LOCK_SH) == -1) {
                perror("Can't flock shared");
                return 1;
        }

        show_lease(fd);

        return 0;
}

The first call to show_lease() will show the write lease set, but
the second will show no leases.

Fix the flock adding so that the leases always stay in the head
of this list.

Found during making the flocks pid-namespaces aware.
Signed-off-by: NPavel Emelyanov <xemul@openvz.org>
Acked-by: N"J. Bruce Fields" <bfields@fieldses.org>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

G33 has 1MB GTT table range.  Fix GTT mapping in case like 512MB aperture
size.
Signed-off-by: NZhenyu Wang <zhenyu.z.wang@intel.com>
Acked-by: NDave Airlie <airlied@linux.ie>
Cc: Dave Jones <davej@codemonkey.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

G33 GTT stolen memory is below graphics data stolen memory and be seperate,
so don't subtract it in stolen mem counting.
Signed-off-by: NZhenyu Wang <zhenyu.z.wang@intel.com>
Acked-by: NDave Airlie <airlied@linux.ie>
Cc: Dave Jones <davej@codemonkey.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Taneli Vähäkangas <vahakang@cs.helsinki.fi> reported that commit
786d7e16 aka "Fix rmmod/read/write races
in /proc entries" broke SBCL + SLIME combo.

The old code in do_select() used DEFAULT_POLLMASK, if couldn't find
->poll handler.  The new code makes ->poll always there and returns 0 by
default, which is not correct.  Return DEFAULT_POLLMASK instead.

Steps to reproduce:

	install emacs, SBCL, SLIME
	emacs
	M-x slime	in *inferior-lisp* buffer
	[watch it doing "Connecting to Swank on port X.."]

Please, apply before 2.6.23.

P.S.: why SBCL can't just read(2) /proc/cpuinfo is a mystery.
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Cc: T Taneli Vahakangas <vahakang@cs.helsinki.fi>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The semantics of call_usermodehelper_pipe() used to be that it would fork
the helper, and wait for the kernel thread to be started.  This was
implemented by setting sub_info.wait to 0 (implicitly), and doing a
wait_for_completion().

As part of the cleanup done in 0ab4dc92,
call_usermodehelper_pipe() was changed to pass 1 as the value for wait to
call_usermodehelper_exec().

This is equivalent to setting sub_info.wait to 1, which is a change from
the previous behaviour.  Using 1 instead of 0 causes
__call_usermodehelper() to start the kernel thread running
wait_for_helper(), rather than directly calling ____call_usermodehelper().

The end result is that the calling kernel code blocks until the user mode
helper finishes.  As the helper is expecting input on stdin, and now no one
is writing anything, everything locks up (observed in do_coredump).

The fix is to change the 1 to UMH_WAIT_EXEC (aka 0), indicating that we
want to wait for the kernel thread to be started, but not for the helper to
finish.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Acked-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

I ran into a few problems.

n_tty_ioctl() for instance:

drivers/char/tty_ioctl.c:799: error: $,1rxstruct termios$,1ry has no
member named $,1rxc_ispeed$,1ry

This is calling the copy interface that is supposed to be using
a termios2 when the new interfaces are defined, however:

	case TIOCGLCKTRMIOS:
		if (kernel_termios_to_user_termios((struct termios __user *)arg, real_tty->termios_locked))
			return -EFAULT;
		return 0;

This is going to write over the end of the userspace
structure by a few bytes, and wasn't caught by you yet
because the i386 implementation is simply copy_to_user()
which does zero type checking.
Signed-off-by: NAlan Cox <alan@redhat.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The futex list traversal on the compat side appears to have
a bug.

It's loop termination condition compares:

        while (compat_ptr(uentry) != &head->list)

But that can't be right because "uentry" has the special
"pi" indicator bit still potentially set at bit 0.  This
is cleared by fetch_robust_entry() into the "entry"
return value.

What this seems to mean is that the list won't terminate
when list iteration gets back to the the head.  And we'll
also process the list head like a normal entry, which could
cause all kinds of problems.

So we should check for equality with "entry".  That pointer
is of the non-compat type so we have to do a little casting
to keep the compiler and sparse happy.

The same problem can in theory occur with the 'pending'
variable, although that has not been reported from users
so far.

Based on the original patch from David Miller.
Acked-by: NIngo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NAndre Haupt <andre@finow14.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The AdvanSys driver wants to align some pointers, and the ALIGN macro
doesn't work for pointers.  Rather than try to make it work, add a new
PTR_ALIGN macro which is typesafe.
Signed-off-by: NMatthew Wilcox <matthew@wil.cx>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix off-by-one in month calculations
Add delay for bus accesses to satisfy Tw > 500ns
Signed-off-by: NMike Rapoport <mike@compulab.co.il>
Acked-by: NRaphael Assenat <raph@8d.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NRobert P. J. Day <rpjday@mindspring.com>
Acked-by: NSatyam Sharma <satyam@infradead.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

ecryptfs.txt moved into filesystems, make 00-INDEX follow.
Signed-off-by: NRob Landley <rob@landley.net>
Cc: Michael Halcrow <mhalcrow@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Addresses http://bugzilla.kernel.org/show_bug.cgi?id=8942

Use PCI_DMA_* constants instead of own private definitions Fall back to
32-bit DMA mask if a 64-bit one fails
Signed-off-by: NMatthew Wilcox <matthew@wil.cx>
Acked-by: NJeff Garzik <jeff@garzik.org>
Tested-by: NLars <polynomial-c@gmx.de>
Cc: Alessandro Polverini <alex@nibbles.it>
Cc: <dac@conglom-o.org>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

dput must be called before mntput here.
Signed-off-by: NAndreas Gruenbacher <agruen@suse.de>
Acked-By: NDavid Howells <dhowells@redhat.com>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The recent changed to raid5 to allow offload of parity calculation etc
introduced some bugs in the code for growing (i.e.  adding a disk to) raid5
and raid6.  This fixes them
Acked-by: NDan Williams <dan.j.williams@intel.com>
Signed-off-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If the quirk enables the SIR part of the SMCf010 device, the 8250 driver
may claim it as a legacy ttyS device, which makes the legacy probe in the
smsc-ircc2 driver fail.
Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Andrey Borzenkov <arvidjaar@mail.ru>
Cc: Michal Piotrowski <michal.k.k.piotrowski@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Restores serial functionality for the BCM1480.
Signed-off-by: NThiemo Seufer <ths@networkno.de>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch changes the error code when dev0:fun1 was hidden by BIOS to one
more appropriate.
Signed-off-by: NAristeu Rozanski <aris@ruivo.org>
Signed-off-by: NMark Gross <mark.gross@intel.com>
Signed-off-by: NDoug Thompson <dougthompson@xmission.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When EDAC is configured for EDAC DEBUGGING, the debug printk output level
was set TOO high (EMERG). This patch brings it down to a DEBUG level
Signed-off-by: NDoug Thompson <dougthompson@xmission.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When the spi_mpc83xx driver receives a tx_buf pointer which is NULL, it
only writes one zero filled word to the transmit register.  If the driver
expects to receive more than one word it will wait forever for a second
receive interrupt.  With this patch the controller will shift out zeroes
until all words have been received.
Signed-off-by: NJan Andersson <jan@gaisler.com>
Tested-by: NAnton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Acked-by: NKumar Gala <galak@kernel.crashing.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If we fail to start a transaction when releasing dquot, we have to call
dquot_release() anyway to mark dquot structure as inactive.  Otherwise we
end in an infinite loop inside dqput().
Signed-off-by: NJan Kara <jack@suse.cz>
Cc: xb <xavier.bru@bull.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  [MIPS] Fix aliasing bug in copy_user_highpage.
  [MIPS] IP22: fix wrong argument order
  [MIPS] IP22: Fix wrong check for second HPC
  [MIPS] Ocelot: remove remaining bits
  [MIPS] TLB: Fix instruction bitmasks
  [MIPS] R10000: Fix wrong test in dma-default.c
  [MIPS] Provide empty irq_enable_hazard definition for legacy and R1 cores.
  [MIPS] Sibyte: Remove broken dependency on EXPERIMENTAL from SIBYTE_SB1xxx_SOC.
  [MIPS] Kconfig: whitespace cleanup.
  [MIPS] PCI: Set need_domain_info if controller domain index is non-zero.
  [MIPS] BCM1480: Fix computation of interrupt mask address register.
  [MIPS] i8259: Add disable method.
  [MIPS] tty: add the new ioctls and definitions.

* master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6:
  pdc202xx_new: PLL detection fix
  via82cxxx: add Arima W730-K8 and other rebadgings to short cables list
  pmac: build fix
  pata_ali/alim15x3: override 80-wire cable detection for Toshiba S1800-814
  hpt366: UltraDMA filter for SATA cards (take 2)
  ide: add ide_dev_is_sata() helper (take 2)
  hpt366: fix PCI clock detection for HPT374 (take 4)
  pdc202xx_new: fix PCI refcounting
  ide: fix PCI refcounting
  mpc8xx: Only build mpc8xx on arch/ppc

This patch has added #include <linux/spinlock.h> to include/linux/leds.h
for rwlock_t.
Signed-off-by: NYoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: NRichard Purdie <rpurdie@rpsys.net>

Fix a bitmask typo in the pdc202xx_new PLL frequency detection code
which causes it to truncate an intermediate difference to 26 bits
instead of the correct 30 bits (the PLL's bitwidth).
Signed-off-by: NMikael Pettersson <mikpe@it.uu.se>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>