- 06 7月, 2010 11 次提交
-
-
由 Anton Vorontsov 提交于
Implement generic OF gpio hooks and thus make device-enabled GPIO chips (i.e. the ones that have gpio_chip->dev specified) automatically attach to the OpenFirmware subsystem. Which means that now we can handle I2C and SPI GPIO chips almost* transparently. * "Almost" because some chips still require platform data, and for these chips OF-glue is still needed, though with this change the glue will be much smaller. Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Bill Gatliff <bgat@billgatliff.com> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Jean Delvare <khali@linux-fr.org> Cc: Andrew Morton <akpm@linux-foundation.org> CC: linux-kernel@vger.kernel.org CC: devicetree-discuss@lists.ozlabs.org
-
由 Grant Likely 提交于
Currently the kernel uses the struct device_node.data pointer to resolve a struct gpio_chip pointer from a device tree node. However, the .data member doesn't provide any type checking and there aren't any rules enforced on what it should be used for. There's no guarantee that the data stored in it actually points to an gpio_chip pointer. Instead of relying on the .data pointer, this patch modifies the code to add a lookup function which scans through the registered gpio_chips and returns the gpio_chip that has a pointer to the specified device_node. Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> CC: Andrew Morton <akpm@linux-foundation.org> CC: Anton Vorontsov <avorontsov@ru.mvista.com> CC: Grant Likely <grant.likely@secretlab.ca> CC: David Brownell <dbrownell@users.sourceforge.net> CC: Bill Gatliff <bgat@billgatliff.com> CC: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> CC: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Jean Delvare <khali@linux-fr.org> CC: linux-kernel@vger.kernel.org CC: devicetree-discuss@lists.ozlabs.org
-
由 Anton Vorontsov 提交于
The OF gpio infrastructure is great for describing GPIO connections within the device tree. However, using a GPIO binding still requires changes to the gpio controller just to add an of_gpio structure. In most cases, the gpio controller doesn't actually need any special support and the simple OF gpio mapping function is more than sufficient. Additional, the current scheme of using of_gpio_chip requires a convoluted scheme to maintain 1:1 mappings between of_gpio_chip and gpio_chip instances. If the struct of_gpio_chip data members were moved into struct gpio_chip, then it would simplify the processing of OF gpio bindings, and it would make it trivial to use device tree OF connections on existing gpiolib controller drivers. This patch eliminates the of_gpio_chip structure and moves the relevant fields into struct gpio_chip (conditional on CONFIG_OF_GPIO). This move simplifies the existing code and prepares for adding automatic device tree support to existing drivers. Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Anton Vorontsov <avorontsov@ru.mvista.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Bill Gatliff <bgat@billgatliff.com> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Jean Delvare <khali@linux-fr.org>
-
由 Grant Likely 提交于
This patch merges the common routines of_device_alloc() and of_device_make_bus_id() from powerpc and microblaze. Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> CC: Michal Simek <monstr@monstr.eu> CC: Grant Likely <grant.likely@secretlab.ca> CC: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Stephen Rothwell <sfr@canb.auug.org.au> CC: microblaze-uclinux@itee.uq.edu.au CC: linuxppc-dev@ozlabs.org CC: devicetree-discuss@lists.ozlabs.org
-
由 Grant Likely 提交于
Merge common code between PowerPC and microblaze. This patch merges the code that scans the tree and registers devices. The functions merged are of_platform_bus_probe(), of_platform_bus_create(), and of_platform_device_create(). This patch also move the of_default_bus_ids[] table out of a Microblaze header file and makes it non-static. The device ids table isn't merged because powerpc and microblaze use different default data. Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> CC: Michal Simek <monstr@monstr.eu> CC: Grant Likely <grant.likely@secretlab.ca> CC: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Stephen Rothwell <sfr@canb.auug.org.au> CC: microblaze-uclinux@itee.uq.edu.au CC: linuxppc-dev@ozlabs.org
-
由 Grant Likely 提交于
Merge common code between powerpc and microblaze Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> CC: Michal Simek <monstr@monstr.eu> CC: Wolfram Sang <w.sang@pengutronix.de> CC: Stephen Rothwell <sfr@canb.auug.org.au> CC: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: microblaze-uclinux@itee.uq.edu.au CC: linuxppc-dev@ozlabs.org
-
由 Grant Likely 提交于
Microblaze and PowerPC share a large chunk of code for translating OF device tree data into usable addresses. Differences between the two consist of cosmetic differences, and the addition of dma-ranges support code to powerpc but not microblaze. This patch moves the powerpc version into common code and applies many of the cosmetic (non-functional) changes from the microblaze version. Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> CC: Michal Simek <monstr@monstr.eu> CC: Wolfram Sang <w.sang@pengutronix.de> CC: Stephen Rothwell <sfr@canb.auug.org.au>
-
由 Grant Likely 提交于
Merge common code between PowerPC and Microblaze. This patch also moves the prototype of pci_address_to_pio() out of pci-bridge.h and into prom.h because the only user of pci_address_to_pio() is of_address_to_resource(). Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> CC: Michal Simek <monstr@monstr.eu> CC: Stephen Rothwell <sfr@canb.auug.org.au>
-
由 Grant Likely 提交于
Merge common code between Microblaze and PowerPC. This patch creates new of_address.h and address.c files to containing address translation and mapping routines. First routine to be moved it of_iomap() Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> CC: Michal Simek <monstr@monstr.eu> CC: Stephen Rothwell <sfr@canb.auug.org.au>
-
由 Grant Likely 提交于
Merge common irq mapping code between PowerPC and Microblaze. This patch merges of_irq_find_parent(), of_irq_map_raw() and of_irq_map_one(). The functions are dependent on one another, so all three are merged in a single patch. Other than cosmetic difference (ie. DBG() vs. pr_debug()), the implementations are identical. of_irq_to_resource() is also merged, but in this case the implementations are different. This patch drops the microblaze version and uses the powerpc implementation unchanged. The microblaze version essentially open-coded irq_of_parse_and_map() which it does not need to do. Therefore the powerpc version is safe to adopt. Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> CC: Michal Simek <monstr@monstr.eu> CC: Benjamin Herrenschmidt <benh@kernel.crashing.org> CC: Stephen Rothwell <sfr@canb.auug.org.au>
-
由 Grant Likely 提交于
The code that figures out what is wrong with the powermac irq device tree data belongs with the rest of the powermac irq code. This patch moves it out of prom_parse.c and into powermac/pic.c so that it is only compiled in when actually needed. Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au>
-
- 29 6月, 2010 2 次提交
-
-
由 Grant Likely 提交于
Merge common code between PowerPC and Microblaze. SPARC implements irq_of_parse_and_map(), but the implementation is different, so it does not use this code. Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Michal Simek <monstr@monstr.eu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Jeremy Kerr <jeremy.kerr@canonical.com>
-
由 Grant Likely 提交于
Now that the device tree node pointer has been moved out of struct of_device and into the common struct device, there isn't anything unique about of_device anymore. In fact, there isn't much need for a separate of_bus when all busses have access to OF style probing. arch/powerpc and arch/microblaze are moving away from using the of_bus and using the regular platform bus instead for mmio devices. This patch makes of_device the same as platform_device as a stepping stone in migrating of_platform_drivers over to the platform bus. Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Acked-by: NDavid S. Miller <davem@davemloft.net> Cc: Michal Simek <monstr@monstr.eu> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au>
-
- 16 6月, 2010 2 次提交
-
-
由 Dmitry Baryshkov 提交于
According to my schematics, on Lite5200 board ethernet phy uses address 0 (all ADDR lines are pulled down). With this change I can talk to onboard phy (LXT971) and correctly use autonegotiation. Signed-off-by: NDmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
由 Dmitry Baryshkov 提交于
When going to standby mode mpc code maps the whole soc5200 node to access warious MBAR registers. However as of_iomap uses 'reg' property of device node, only small part of MBAR is getting mapped. Thus pm code gets oops when trying to access high parts of MBAR. As a way to overcome this, make mpc52xx_pm_prepare() explicitly map whole MBAR (0xc0000). Signed-off-by: NDmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
- 15 6月, 2010 1 次提交
-
-
由 Dmitry Baryshkov 提交于
Add dts descriptions for onboard 256 byte I2C eeprom (pcf8582C-2) and 16MB NOR flash (am29lv652d). Signed-off-by: NDmitry Eremin-Solenikov <dbaryshkov@gmail.com> [grant.likely@secretlab.ca: added lite5200b eeprom and declared lite5200 gpios] Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
- 12 6月, 2010 1 次提交
-
-
由 Yinghai Lu 提交于
Yannick found that video does not work with 2.6.34. The cause of this bug was that the BIOS had assigned the wrong range to the PCI bridge above the video device. Before 2.6.34 the kernel would have shrunk the size of the bridge window, but since d65245c3 PCI: don't shrink bridge resources the kernel will avoid shrinking BIOS ranges. So zero out the old range if we fail to claim it at boot time; this will cause us to allocate a new range at startup, restoring the 2.6.34 behavior. Fixes regression https://bugzilla.kernel.org/show_bug.cgi?id=16009. Reported-by: NYannick <yannick.roehlly@free.fr> Acked-by: NBjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: NYinghai Lu <yinghai@kernel.org> Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
-
- 09 6月, 2010 1 次提交
-
-
由 Jean Delvare 提交于
kvmppc_e500_exit() is a module_exit function, so it should be tagged with __exit, not __init. The incorrect annotation was added by commit 2986b8c7. Signed-off-by: NJean Delvare <khali@linux-fr.org> Cc: stable@kernel.org Signed-off-by: NAlexander Graf <agraf@suse.de> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
- 07 6月, 2010 1 次提交
-
-
由 Denis Kirjanov 提交于
Fix potential initial_lfsr buffer overrun. Writing past the end of the buffer could happen when index == ENTRIES Signed-off-by: NDenis Kirjanov <dkirjanov@kernel.org> Cc: stable@kernel.org Signed-off-by: NRobert Richter <robert.richter@amd.com>
-
- 03 6月, 2010 1 次提交
-
-
由 Wolfram Sang 提交于
Signed-off-by: NWolfram Sang <w.sang@pengutronix.de> Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
- 02 6月, 2010 4 次提交
-
-
由 Benjamin Herrenschmidt 提交于
Grant patches added an of mach table to struct device_driver. However, while he changed the macio device code to use that, he left the match table pointer in struct macio_driver and didn't update drivers to use the "new" one, thus breaking the probing. This completes the change by moving all drivers to setup the "new" one, removing all traces of the old one, and while at it (since it changes the exact same locations), I also remove two other duplicates from struct driver which are the name and owner fields. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Denis Kirjanov 提交于
Fix smatch warning: warning: constant 0x800000000 is so big it is long Signed-off-by: NDenis Kirjanov <dkirjanov@kernel.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
emulate_step() in kprobe_handler() would've already determined if the probed instruction can be emulated. We single-step in hardware only if the instruction couldn't be emulated. resume_execution() therefore is superfluous -- all we need is to fix up the instruction pointer after single-stepping. Thanks to Paul Mackerras for catching this. Signed-off-by: NAnanth N Mavinakayanahalli <ananth@in.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Alexandre Bounine 提交于
Fixes bug introduced by commit 61c7a080 (of: Always use 'struct device.of_node' to get device node pointer) Signed-off-by: NAlexandre Bounine <alexandre.bounine@idt.com> Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
- 31 5月, 2010 1 次提交
-
-
由 Benjamin Herrenschmidt 提交于
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 29 5月, 2010 1 次提交
-
-
由 Stephen Rothwell 提交于
Commit 38516ab5 ("tracing: Let tracepoints have data passed to tracepoint callbacks") requires this fixup to the powerpc code. Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Acked-by: NSteven Rostedt <rostedt@goodmis.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 28 5月, 2010 9 次提交
-
-
由 Christoph Hellwig 提交于
We don't name our generic fsync implementations very well currently. The no-op implementation for in-memory filesystems currently is called simple_sync_file which doesn't make too much sense to start with, the the generic one for simple filesystems is called simple_fsync which can lead to some confusion. This patch renames the generic file fsync method to generic_file_fsync to match the other generic_file_* routines it is supposed to be used with, and the no-op implementation to noop_fsync to make it obvious what to expect. In addition add some documentation for both methods. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Christoph Hellwig 提交于
Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 FUJITA Tomonori 提交于
There are more architectures that don't support ARCH_HAS_SG_CHAIN than those that support it. This removes removes ARCH_HAS_SG_CHAIN in asm-generic/scatterlist.h and lets arhictectures to define it. It's clearer than defining ARCH_HAS_SG_CHAIN asm-generic/scatterlist.h and undefing it in arhictectures that don't support it. Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 FUJITA Tomonori 提交于
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 FUJITA Tomonori 提交于
sync_single_range_for_cpu and sync_single_range_for_device hooks in swiotlb_dma_ops are unnecessary because sync_single_for_cpu and sync_single_for_device are used there. Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Becky Bruce <beckyb@kernel.crashing.org> Reviewed-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Thomas Moll 提交于
Fix the maintenance access functions to farend RapidIO devices. 1. Fixed shift of the given offset, to open the maintenance window 2. Mask offset to limit access to the opened maintenance window 3. Added extended destid part to rowtear register, required for 16bit mode This method is matching maintenance transactions generation described by Freescale in the appnote AN2932. With this modification full access to a 16MB maintenance window is possible, this patch is required for IDT cps switches. For easier handling of the access routines, the access was limited to aligned memory regions. This should be no problem because all registers are 32bit wide. Signed-off-by: NThomas Moll <thomas.moll@sysgo.com> Tested-by: NAlexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Li Yang <leoli@freescale.com> Cc: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alexandre Bounine 提交于
Add Machine Check exception handling into RapidIO port driver for Freescale SoCs (MPC85xx). Signed-off-by: NAlexandre Bounine <alexandre.bounine@idt.com> Tested-by: NThomas Moll <thomas.moll@sysgo.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Li Yang <leoli@freescale.com> Cc: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alexandre Bounine 提交于
Add RapidIO Port-Write message handler for Freescale SoCs with RapidIO port. Signed-off-by: NAlexandre Bounine <alexandre.bounine@idt.com> Tested-by: NThomas Moll <thomas.moll@sysgo.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Li Yang <leoli@freescale.com> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alexandre Bounine 提交于
Add RapidIO Port-Write message handling in the context of Error Management Extensions Specification Rev.1.3. Signed-off-by: NAlexandre Bounine <alexandre.bounine@idt.com> Tested-by: NThomas Moll <thomas.moll@sysgo.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Li Yang <leoli@freescale.com> Cc: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 26 5月, 2010 2 次提交
-
-
由 Linus Torvalds 提交于
This reverts commit b3b77c8c, which was also totally broken (see commit 0d2daf5c that reverted the crc32 version of it). As reported by Stephen Rothwell, it causes problems on big-endian machines: > In file included from fs/jfs/jfs_types.h:33, > from fs/jfs/jfs_incore.h:26, > from fs/jfs/file.c:22: > fs/jfs/endian24.h:36:101: warning: "__LITTLE_ENDIAN" is not defined The kernel has never had that crazy "__BYTE_ORDER == __LITTLE_ENDIAN" model. It's not how we do things, and it isn't how we _should_ do things. So don't go there. Requested-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Anatolij Gustschin 提交于
Enables SM502 frame buffer and framebuffer console in the default config file Signed-off-by: NAnatolij Gustschin <agust@denx.de> Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
-
- 25 5月, 2010 3 次提交
-
-
由 Joakim Tjernlund 提交于
Linux does not define __BYTE_ORDER in its endian header files which makes some header files bend backwards to get at the current endian. Lets #define __BYTE_ORDER in big_endian.h/litte_endian.h to make it easier for header files that are used in user space too. In userspace the convention is that 1. _both_ __LITTLE_ENDIAN and __BIG_ENDIAN are defined, 2. you have to test for e.g. __BYTE_ORDER == __BIG_ENDIAN. Signed-off-by: NJoakim Tjernlund <Joakim.Tjernlund@transmode.se> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Anatolij Gustschin 提交于
Signed-off-by: NJohn Rigby <jcrigby@gmail.com> Signed-off-by: NAnatolij Gustschin <agust@denx.de> Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
由 Anatolij Gustschin 提交于
Since PSC could also be used in other modes than UART mode we move PSC FIFO memory initialization from serial driver to common platform code. The initialized FIFO memory slices may not overlap, so the most easy way would be to configure them all at once at init time for all PSC devices. This is now done by this patch. Signed-off-by: NAnatolij Gustschin <agust@denx.de> Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-