Adds an interface, scripting_ops, that when implemented for a
particular scripting language enables built-in support for trace
stream processing using that language.

The interface is designed to enable full-fledged language
interpreters to be embedded inside the perf executable and
thereby make the full capabilities of the supported languages
available for trace processing.

See below for details on the interface.

This patch also adds a couple command-line options to 'perf
trace':

The -s option option is used to specify the script to be run.
Script names that can be used with -s take the form:

[language spec:]scriptname[.ext]

Scripting languages register a set of 'language specs' that can
be used to specify scripts for the registered languages.  The
specs can be used either as prefixes or extensions.

If [language spec:] is used, the script is taken as a script of
the matching language regardless of any extension it might have.
 If [language spec:] is not used, [.ext] is used to look up the
language it corresponds to.  Language specs are case
insensitive.

e.g. Perl scripts can be specified in the following ways:

Perl:scriptname
pl:scriptname.py # extension ignored
PL:scriptname
scriptname.pl
scriptname.perl

The -g [language spec] option gives users an easy starting point
for writing scripts in the specified language.  Scripting
support for a particular language can implement a
generate_script() scripting op that outputs an empty (or
near-empty) set of handlers for all the events contained in a
given perf.data trace file - this option gives users a direct
way to access that.

Adding support for a scripting language
---------------------------------------

The main thing that needs to be done do add support for a new
language is to implement the scripting_ops interface:

It consists of the following four functions:

    start_script()
    stop_script()
    process_event()
    generate_script()

start_script() is called before any events are processed, and is
meant to give the scripting language support an opportunity to
set things up to receive events e.g. create and initialize an
instance of a language interpreter.

stop_script() is called after all events are processed, and is
meant to give the scripting language support an opportunity to
clean up e.g. destroy the interpreter instance, etc.

process_event() is called once for each event and takes as its
main parameter a pointer to the binary trace event record to be
processed. The implementation is responsible for picking out the
binary fields from the event record and sending them to the
script handler function associated with that event e.g. a
function derived from the event name it's meant to handle e.g.
'sched::sched_switch()'.  The 'format' information for trace
events can be used to parse the binary data and map it into a
form usable by a given scripting language; see the Perl
implemention in subsequent patches for one possible way to
leverage the existing trace format parsing code in perf and map
that info into specific scripting language types.

generate_script() should generate a ready-to-run script for the
current set of events in the trace, preferably with bodies that
print out every field for each event.  Again, look at the Perl
implementation for clues as to how that can be done.  This is an
optional, but very useful op.

Support for a given language should also add a language-specific
setup function and call it from setup_scripting().  The
language-specific setup function associates the the scripting
ops for that language with one or more 'language specifiers'
(see below) using script_spec_register().  When a script name is
specified on the command line, the scripting ops associated with
the specified language are used to instantiate and use the
appropriate interpreter to process the trace stream.

In general, it should be relatively easy to add support for a
new language, especially if the language implementation supports
an interface allowing an interpreter to be 'embedded' inside
another program (in this case the containing program will be
'perf trace'). If so, it should be relatively straightforward to
translate trace events into invocations of user-defined script
functions where e.g. the function name corresponds to the event
type and the function parameters correspond to the event fields.
 The event and field type information exported by the event
tracing infrastructure (via the event 'format' files) should be
enough to parse and send any piece of trace data to the user
script.  The easiest way to see how this can be done would be to
look at the Perl implementation contained in
perf/util/trace-event-perl.c/.h.

There are a couple of other things that aren't covered by the
scripting_ops or setup interface and are technically optional,
but should be implemented if possible.  One of these is support
for 'flag' and 'symbolic' fields e.g. being able to use more
human-readable values such as 'GFP_KERNEL' or
HI/BLOCK_IOPOLL/TASKLET in place of raw flag values.  See the
Perl implementation to see how this can be done. The other thing
is support for 'calling back' into the perf executable to access
e.g. uncommon fields not passed by default into handler
functions, or any metadata the implementation might want to make
available to users via the language interface.  Again, see the
Perl implementation for examples.
Signed-off-by: NTom Zanussi <tzanussi@gmail.com>
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
Cc: anton@samba.org
Cc: hch@infradead.org
LKML-Reference: <1259133352-23685-2-git-send-email-tzanussi@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Now we have a very high level routine for simple tools to
process IP sample events:

	int event__preprocess_sample(const event_t *self,
				     struct addr_location *al,
				     symbol_filter_t filter)

It receives the event itself and will insert new threads in the
global threads list and resolve the map and symbol, filling all
this info into the new addr_location struct, so that tools like
annotate and report can further process the event by creating
hist_entries in their specific way (with or without callgraphs,
etc).

It in turn uses the new next layer function:

	void thread__find_addr_location(struct thread *self, u8 cpumode,
					enum map_type type, u64 addr,
					struct addr_location *al,
					symbol_filter_t filter)

This one will, given a thread (userspace or the kernel kthread
one), will find the given type (MAP__FUNCTION now, MAP__VARIABLE
too in the near future) at the given cpumode, taking vdsos into
account (userspace hit, but kernel symbol) and will fill all
these details in the addr_location given.

Tools that need a more compact API for plain function
resolution, like 'kmem', can use this other one:

	struct symbol *thread__find_function(struct thread *self, u64 addr,
					     symbol_filter_t filter)

So, to resolve a kernel symbol, that is all the 'kmem' tool
needs, its just a matter of calling:

	sym = thread__find_function(kthread, addr, NULL);

The 'filter' parameter is needed because we do lazy
parsing/loading of ELF symtabs or /proc/kallsyms.

With this we remove more code duplication all around, which is
always good, huh? :-)
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: John Kacur <jkacur@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1259346563-12568-12-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

While implementing event__preprocess_sample, that will do all of
the symbol lookup in one convenient function, I noticed that
util/process_event.[ch] were not being used at all, then started
looking if there were other functions that could be shared
and...

All those functions really don't need to receive offset + head,
the only thing they did was common to all of them, so do it at
one place instead.

Stats about number of each type of event processed now is done
in a central place.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: John Kacur <jkacur@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1259346563-12568-11-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1259346563-12568-10-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Making the routines that were so far specific to the kernel maps
useful for all threads.

This is done by making the kernel maps be contained in a kernel
"thread".

This gets the kernel specific routines closer to the userspace
counterparts, which will help in reducing the boilerplate for
resolving a symbol, as will be demonstrated in the next patches.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1259346563-12568-9-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

So that we can support multiple symbol table types.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1259346563-12568-8-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

So that the kallsyms loading routines are the direct counterpart
of the vmlinux loading ones, i.e. dso__load_kallsyms is the
counterpart of dso__load_vmlinux.

In the process make them also use the symbols rb tree indexed by
map->type, paving the way for supporting other types of symtabs,
such as the next one to be supported: variables.

This also allowed removal of yet another global variable:
kernel_map__functions.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1259346563-12568-7-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

By using an array of rb_roots in struct dso we can, from a
struct map instance to get the right symbol rb_tree more easily.
This way we can have just one symbol lookup method for struct
map instances, map__find_symbol, instead of one per symtab type
(functions, variables).
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1259346563-12568-6-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

That way we will be able to check if the right symtab is loaded
in the underlying DSO.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1259346563-12568-5-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

perf annotate was the only user, and it doesn't really need it.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1259346563-12568-4-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

We don't need to look at modules in dsos__findnew because the
kernel events come only with user DSOs. Also we need a way to
list just the module DSOs so that we can create multiple sets of
maps, now that we will support maps for the variables in a
symtab.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1259346563-12568-3-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

As we'll have kernel_map[s]__variables too.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1259346563-12568-2-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This should be properly fixed when we remove the XXX comment in
'perf report', function resolve_symbol.
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1259346563-12568-1-git-send-email-acme@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

"symbol_name+0" is not so friendly.
It makes the output longer.
Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com>
Acked-by: NMasami Hiramatsu <mhiramat@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4B0CEBCB.7080309@cn.fujitsu.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Sometimes the group name is not "kprobes",
It'll be better if we can read it from tracing/kprobe_events.

 # echo 'r:laijs/vfs_read vfs_read %ax' > kprobe_events
 # cat kprobe_events
 r:laijs/vfs_read vfs_read %ax=%ax
Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com>
Acked-by: NMasami Hiramatsu <mhiramat@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4B0CEBAF.6000104@cn.fujitsu.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

tp->nr_args is not set before we "goto error",
it causes memory leak for free_trace_probe() use tp->nr_args
to free memory of args.
Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com>
Acked-by: NMasami Hiramatsu <mhiramat@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4B0CEB95.2060107@cn.fujitsu.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Field syscall number is missed in syscall_enter_define_fields()/
syscall_exit_define_fields().

Syscall number is also needed for event filter or other users.
Signed-off-by: NLai Jiangshan <laijs@cn.fujitsu.com>
Acked-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <4B0E330D.1070206@cn.fujitsu.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Kernel breakpoints are created using functions in which we pass
breakpoint parameters as individual variables: address, length
and type.

Although it fits well for x86, this just does not scale across
architectures that may support this api later as these may have
more or different needs. Pass in a perf_event_attr structure
instead because it is meant to evolve as much as possible into
a generic hardware breakpoint parameter structure.
Reported-by: NK.Prasad <prasad@linux.vnet.ibm.com>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1259294154-5197-2-git-send-regression-fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

In-kernel user breakpoints are created using functions in which
we pass breakpoint parameters as individual variables: address,
length and type.

Although it fits well for x86, this just does not scale across
archictectures that may support this api later as these may have
more or different needs. Pass in a perf_event_attr structure
instead because it is meant to evolve as much as possible into
a generic hardware breakpoint parameter structure.
Reported-by: NK.Prasad <prasad@linux.vnet.ibm.com>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1259294154-5197-1-git-send-regression-fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

When a pinned group cannot be scheduled it goes into error state.

Normally a group cannot go out of error state without being
explicitly re-enabled or disabled. There was a bug in per-thread
mode, whereby upon termination of the thread, the group would
transition from error to off leading to bogus counts and timing
information returned by read().

Fix it by clearing the error state.
Signed-off-by: NStephane Eranian <eranian@google.com>
Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: perfmon2-devel@lists.sourceforge.net
LKML-Reference: <4b0eb9ce.0508d00a.573b.ffffeab6@mx.google.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Commit 53d0422c ("tracing: Convert some kmem events to DEFINE_EVENT")
moved the kmem tracepoint creation from util.c to page_alloc.c,
but forgot to move the exports.

Move them back.

Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mel Gorman <mel@csn.ul.ie>
LKML-Reference: <4B0E286A.2000405@cn.fujitsu.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Add signal_overflow_fail and signal_lose_info tracepoints
for signal-lost events.

Changes in v3:
 - Add docbook style comments

Changes in v2:
 - Use siginfo string macro
Suggested-by: NRoland McGrath <roland@redhat.com>
Reviewed-by: NJason Baron <jbaron@redhat.com>
Signed-off-by: NMasami Hiramatsu <mhiramat@redhat.com>
Acked-by: NRoland McGrath <roland@redhat.com>
Cc: systemtap <systemtap@sources.redhat.com>
Cc: DLE <dle-develop@lists.sourceforge.net>
Cc: Oleg Nesterov <oleg@redhat.com>
LKML-Reference: <20091124215658.30449.9934.stgit@dhcp-100-2-132.bos.redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Add a tracepoint where a process gets a signal. This tracepoint
shows signal-number, sa-handler and sa-flag.

Changes in v3:
 - Add docbook style comments

Changes in v2:
 - Add siginfo argument
 - Fix comment
Signed-off-by: NMasami Hiramatsu <mhiramat@redhat.com>
Reviewed-by: NJason Baron <jbaron@redhat.com>
Acked-by: NRoland McGrath <roland@redhat.com>
Cc: systemtap <systemtap@sources.redhat.com>
Cc: DLE <dle-develop@lists.sourceforge.net>
Cc: Oleg Nesterov <oleg@redhat.com>
LKML-Reference: <20091124215651.30449.20926.stgit@dhcp-100-2-132.bos.redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Move signal sending event to events/signal.h. This patch also
renames sched_signal_send event to signal_generate.

Changes in v4:
 - Fix a typo of task_struct pointer.

Changes in v3:
 - Add docbook style comments

Changes in v2:
 - Add siginfo argument
 - Add siginfo storing macro
Signed-off-by: NMasami Hiramatsu <mhiramat@redhat.com>
Reviewed-by: NJason Baron <jbaron@redhat.com>
Acked-by: NRoland McGrath <roland@redhat.com>
Cc: systemtap <systemtap@sources.redhat.com>
Cc: DLE <dle-develop@lists.sourceforge.net>
Cc: Oleg Nesterov <oleg@redhat.com>
LKML-Reference: <20091124215645.30449.60208.stgit@dhcp-100-2-132.bos.redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

bp_perf_event_destroy() is unused in its off-case version, let's
remove it to fix the following warning reported by Stephen
Rothwell in linux-next:

  kernel/perf_event.c:4306: warning: 'bp_perf_event_destroy' defined but not used
Reported-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1259180453-5813-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

If the new percpu tree is combined with the perf events tree
the following new warning triggers:

 kernel/hw_breakpoint.c: In function 'toggle_bp_task_slot':
 kernel/hw_breakpoint.c:151: warning: 'task_bp_pinned' is used uninitialized in this function

Because it's not valid anymore to define a local variable
and a percpu variable (even if it's file scope local) with
the same name.

Rename the local variable to resolve this.
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: K.Prasad <prasad@linux.vnet.ibm.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
LKML-Reference: <200911260701.nAQ71owx016356@imap1.linux-foundation.org>
[ v2: added changelog ]
Signed-off-by: NIngo Molnar <mingo@elte.hu>

When we schedule out a breakpoint from the cpu, we also
incidentally remove the "Global exact breakpoint" flag from the
breakpoint control register. It makes us losing the fine grained
precision about the origin of the instructions that may trigger
breakpoint exceptions for the other breakpoints running in this
cpu.
Reported-by: NPrasad <prasad@linux.vnet.ibm.com>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1259211878-6013-1-git-send-regression-fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This simplifies the error handling when we create a breakpoint.
We don't need to check the NULL return value corner case anymore
since we have improved perf_event_create_kernel_counter() to
always return an error code in the failure case.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Prasad <prasad@linux.vnet.ibm.com>
LKML-Reference: <1259210142-5714-3-git-send-regression-fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

In fail case, perf_event_create_kernel_counter() returns NULL
instead of an error, which doesn't help us to inform the user
about the origin of the problem from the outer most callers.
Often we can just return -EINVAL, which doesn't help anyone when
it's eventually about a memory allocation failure.

Then, this patch makes perf_event_create_kernel_counter() always
return a detailed error code.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Prasad <prasad@linux.vnet.ibm.com>
LKML-Reference: <1259210142-5714-2-git-send-regression-fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The error path of a breakpoint modification is broken in
the ksym tracer. A modified breakpoint hlist node is immediately
released after its removal. Also we leak a breakpoint in this
case.

Fix the path.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Prasad <prasad@linux.vnet.ibm.com>
LKML-Reference: <1259210142-5714-1-git-send-regression-fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The original format for sched_stat_iowait and sched_stat_sleep:

  $ cat events/sched/sched_stat_iowait/format
  ...
  print fmt: "comm=%s pid=%d delay=%Lu [ns]", ...
  $ cat events/sched/sched_stat_sleep/format
  ...
  print fmt: "comm=%s pid=%d delay=%Lu [ns]", ...

But commit commit 75ec29ab
("tracing: Convert some sched trace events to DEFINE_EVENT and
_PRINT") broke the format:

  $ cat events/sched/sched_stat_iowait/format
  print fmt: "task: %s:%d iowait: %Lu [ns]", ...
  $ cat events/sched/sched_stat_sleep/format
  print fmt: "task: %s:%d sleep: %Lu [ns]", ...

No change in functionality.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4B0E2951.9050800@cn.fujitsu.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Use DECLARE_EVENT_CLASS to remove duplicate code:

   text    data     bss     dec     hex filename
 294695    6104     340  301139   49853 fs/ext4/ext4.o.old
 289983    6104     324  296411   485db fs/ext4/ext4.o

5 events are convertd:

  ext4__write_begin: ext4_write_begin, ext4_da_write_begin
  ext4__write_end: ext4_{ordered, writeback, journalled}_write_end

No change in functionality.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4B0E2938.2040708@cn.fujitsu.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Use DECLARE_EVENT_CLASS to remove duplicate code:

   text    data     bss     dec     hex filename
  34903    1693     448   37044    90b4 fs/jbd2/journal.o.old
  31931    1693     416   34040    84f8 fs/jbd2/journal.o

Four events are converted:

  jbd2_commit: jbd2_start_commit,
               jbd2_commit_{locking, flushing, logging}

No change in functionality.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4B0E290F.7030909@cn.fujitsu.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

use DECLARE_EVENT_CLASS to remove duplicate code:

   text    data     bss     dec     hex filename
  53570    3284     184   57038    dece block/blk-core.o.old
  43702    3284     144   47130    b81a block/blk-core.o

12 events are converted:

  block_rq: block_rq_insert, block_rq_issue
  block_rq_with_error: block_rq_{abort, requeue, complete}
  block_bio: block_bio_{backmerge, frontmerge, queue}
  block_get_rq: block_getrq, block_sleeprq
  block_unplug: block_unplug_timer, block_unplug_io

No change in functionality.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4B0E28E6.7060609@cn.fujitsu.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Use DECLARE_EVENT_CLASS to remove duplicate code:

   text    data     bss     dec     hex filename
   4312     524      12    4848    12f0 kernel/trace/power-traces.o.old
   3455     524       8    3987     f93 kernel/trace/power-traces.o

Two events are converted:

  power: power_start, power_frequency

No change in functionality.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Arjan van de Ven <arjan@infradead.org>
LKML-Reference: <4B0E28C2.1090906@cn.fujitsu.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Use DECLARE_EVENT_CLASS to remove duplicate code:

   text    data     bss     dec     hex filename
  13171     800      72   14043    36db kernel/workqueue.o.old
  12243     800      68   13111    3337 kernel/workqueue.o

Two events are converted:

  workqueue: workqueue_insertion, workqueue_execution

No change in functionality.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4B0E289F.5010104@cn.fujitsu.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Use DECLARE_EVENT_CLASS to remove duplicate code:

   text    data     bss     dec     hex filename
  12781     952      36   13769    35c9 kernel/softirq.o.old
  11981     952      32   12965    32a5 kernel/softirq.o

Two events are converted:

  softirq: softirq_entry, softirq_exit

No change in functionality.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4B0E287F.4030708@cn.fujitsu.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Use DECLARE_EVENT_CLASS to remove duplicate code:

   text    data     bss     dec     hex filename
 333987   69800   27228  431015   693a7 mm/built-in.o.old
 330030   69800   27228  427058   68432 mm/built-in.o

8 events are converted:

  kmem_alloc: kmalloc, kmem_cache_alloc
  kmem_alloc_node: kmalloc_node, kmem_cache_alloc_node
  kmem_free: kfree, kmem_cache_free
  mm_page: mm_page_alloc_zone_locked, mm_page_pcpu_drain

No change in functionality.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Acked-by: NPekka Enberg <penberg@cs.helsinki.fi>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mel Gorman <mel@csn.ul.ie>
LKML-Reference: <4B0E286A.2000405@cn.fujitsu.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Use DECLARE_EVENT_CLASS to remove duplicate code:

   text    data     bss     dec     hex filename
  29854    1980     128   31962    7cda kernel/module.o.old
  28750    1980     128   30858    788a kernel/module.o

Two events are converted:

  module_refcnt: module_get, module_put

No change in functionality.
Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4B0E283B.3010508@cn.fujitsu.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

It is not quite obvious at first sight what TRACE_EVENT_TEMPLATE
does: does it define an event as well beyond defining a template?

To clarify this, rename it to DECLARE_EVENT_CLASS, which follows
the various 'DECLARE_*()' idioms we already have in the kernel:

  DECLARE_EVENT_CLASS(class)

    DEFINE_EVENT(class, event1)
    DEFINE_EVENT(class, event2)
    DEFINE_EVENT(class, event3)

To complete this logic we should also rename TRACE_EVENT() to:

  DEFINE_SINGLE_EVENT(single_event)

... but in a more quiet moment of the kernel cycle.

Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <4B0E286A.2000405@cn.fujitsu.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>