- 22 7月, 2012 9 次提交
-
-
由 John Fastabend 提交于
Do RAR entry accounting correctly so that errors are reported and promisc mode is set correctly when the number of entries exceeds the hardware limits. This can happen with many macvlan devices attached to the PF or by adding many fdb entries in SR-IOV modes. Also this includes a small refactor to fdb_add() to avoid having so many nested if/else statements after adding a check for the number or RAR entries. The max entries for the PF is currently 16 we allow 15 additional entries to account for the defined MAC. Signed-off-by: NJohn Fastabend <john.r.fastabend@intel.com> Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com> Tested-by: NRoss Brattain <ross.b.brattain@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Alexander Duyck 提交于
This change makes it so the function ixgbe_dcb_get_tc_from_up will use the num_tcs.pg_tcs to determine the starting value for determining a traffic class based on a user priority. The main motivation for this change is to address possible bad configurations in which more TCs worth of data are populated then there are actual TCs. By limiting this value we can at least make certain we are not providing a map with values that are out of range. As a result any user priorities that are setup in the configuration with a traffic class mapping higher than what the hardware supports will be reported as being on TC 0. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Acked-by: NGreg Rose <gregory.v.rose@intel.com> Tested-by: NStephen Ko <stephen.s.ko@intel.com> Tested-by: NRoss Brattain <ross.b.brattain@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Alexander Duyck 提交于
The recent changes to netdev_alloc_skb actually make it so that the size of the buffer now actually has a more direct input on the truesize. So in order to make best use of the piece of a page we are allocated I am reducing the IXGBE_RX_HDR_SIZE to 256 so that our truesize will be reduced by 256 bytes as well. This should result in performance improvements since the number of uses per page should increase from 4 to 6 in the case of a 4K page. In addition we should see socket performance improvements due to the truesize dropping to less than 1K for buffers less than 256 bytes. Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Greg Rose 提交于
Make the function static to cleanup namespace. Signed-off-by: NGreg Rose <gregory.v.rose@intel.com> Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com> Tested-by: Sibai Li <Sibai.li@intel.com Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Alexander Duyck 提交于
This change makes it so that we can use the atr_sample_rate to determine if we are capable of supporting ATR. The advantage to this approach is that it allows us to now determine the setting of the IXGBE_FLAG_FDIR_HASH_CAPABLE based on the queueing scheme, instead of the queueing scheme being based on the flag. Using this approach there are essentially 5 conditions that must be checked prior to trying to enable ATR: 1. Is SR-IOV disabled? 2. Are the number of TCs <= 1? 3. Is RSS queueing limit greater than 1? 4. Is atr_sample_rate set? 5. Is Flow Director perfect filtering disabled? If any of these conditions are enabled they should disable ATR filtering. Note that in the case of conditions 1 through 4 being met we will set things up for ATR queueing, however if test 5 fails we will still leave the queues allocated for use by perfect filters. The reason for this is to allow for us to switch back and forth between ntuple and ATR without needing to reallocate the descriptor rings. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Alexander Duyck 提交于
This change adds support for handling IO errors and slot resets. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NGreg Rose <gregory.v.rose@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Alexander Duyck 提交于
This change adds a spinlock around the mailbox accesses to prevent simultaneous access to the mailboxes. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NGreg Rose <gregory.v.rose@intel.com> Tested-by: NSibai Li <sibai.li@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Alexander Duyck 提交于
This patch does two things. First it drops the unnecessary work of searching for enabled VFs when we first bring up the adapter and instead just uses pci_num_vf to determine how many VFs are enabled on the adapter. The second thing it does is drop the use of vfdev from the vf_data_storage structure. Instead we just search the entire system for a VF that has us as it's PF, and then if that VF is assigned we indicate that the VFs are assigned. This allows us to still check for assigned VFs even if the vfinfo allocation has failed, or vfinfo has been freed. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Acked-by: NGreg Rose <gregory.v.rose@intel.com> Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com> Tested-by: NSibai Li <sibai.li@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Alexander Duyck 提交于
This is meant to fix a bug in which we were not checking for pre-existing VFs if we were not setting the max_vfs value at driver load. What happens now is that we always call ixgbe_enable_sriov and this checks for pre-existing VFs ore requested VFs prior to deciding on no SR-IOV. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com> Tested-by: NSibai Li <sibai.li@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 21 7月, 2012 9 次提交
-
-
由 Denis Efremov 提交于
The replacement of spin_lock_irq/spin_unlock_irq pair in interrupt handler by spin_lock_irqsave/spin_lock_irqrestore pair. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: NDenis Efremov <yefremov.denis@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Cloud Ren 提交于
When io access mode is enabled by BOOTROM or BIOS for AR8152 v2.1, the register can't be read/write by memory access mode. Clearing Bit 8 of Register 0x21c could fixed the issue. Signed-off-by: NCloud Ren <cjren@qca.qualcomm.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Nxiong <xiong@qca.qualcomm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mikulas Patocka 提交于
This patch fixes a crash tun_chr_close -> netdev_run_todo -> tun_free_netdev -> sk_release_kernel -> sock_release -> iput(SOCK_INODE(sock)) introduced by commit 1ab5ecb9 The problem is that this socket is embedded in struct tun_struct, it has no inode, iput is called on invalid inode, which modifies invalid memory and optionally causes a crash. sock_release also decrements sockets_in_use, this causes a bug that "sockets: used" field in /proc/*/net/sockstat keeps on decreasing when creating and closing tun devices. This patch introduces a flag SOCK_EXTERNALLY_ALLOCATED that instructs sock_release to not free the inode and not decrement sockets_in_use, fixing both memory corruption and sockets_in_use underflow. It should be backported to 3.3 an 3.4 stabke. Signed-off-by: NMikulas Patocka <mikulas@artax.karlin.mff.cuni.cz> Cc: stable@kernel.org Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
Largely copied from bonding code. Signed-off-by: NJiri Pirko <jiri@resnulli.us> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
Since now number of tx queues can be specified during bond instance creation and therefore it may differ from params.tx_queues, use rather real_num_tx_queues for boundary check. Signed-off-by: NJiri Pirko <jiri@resnulli.us> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
As this is going to be used not only by bonding. Signed-off-by: NJiri Pirko <jiri@resnulli.us> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
Also cut out unused function parameters and possible err in return value. Signed-off-by: NJiri Pirko <jiri@resnulli.us> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jon Mason 提交于
Use PCI_VENDOR_ID_INTEL from pci_ids.h instead of creating its own vendor ID #define. Signed-off-by: NJon Mason <jdmason@kudzu.us> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Cc: Bruce Allan <bruce.w.allan@intel.com> Cc: Carolyn Wyborny <carolyn.wyborny@intel.com> Cc: Don Skidmore <donald.c.skidmore@intel.com> Cc: Greg Rose <gregory.v.rose@intel.com> Cc: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Cc: Alex Duyck <alexander.h.duyck@intel.com> Cc: John Ronciak <john.ronciak@intel.com> Acked-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jon Mason 提交于
Use PCI_VENDOR_ID_INTEL from pci_ids.h instead of creating its own vendor ID #define. Signed-off-by: NJon Mason <jdmason@kudzu.us> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Cc: Bruce Allan <bruce.w.allan@intel.com> Cc: Carolyn Wyborny <carolyn.wyborny@intel.com> Cc: Don Skidmore <donald.c.skidmore@intel.com> Cc: Greg Rose <gregory.v.rose@intel.com> Cc: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Cc: Alex Duyck <alexander.h.duyck@intel.com> Cc: John Ronciak <john.ronciak@intel.com> Acked-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 7月, 2012 22 次提交
-
-
由 Ira W. Snyder 提交于
The Janz VMOD-ICAN3 hardware has support for one shot packet transmission. This means that a packet will be attempted to be sent once, with no automatic retries. The SocketCAN core has a controller-wide setting for this mode: CAN_CTRLMODE_ONE_SHOT. The Janz VMOD-ICAN3 hardware supports this flag on a per-packet level, but the SocketCAN core does not. Signed-off-by: NIra W. Snyder <iws@ovro.caltech.edu> Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
-
由 Ira W. Snyder 提交于
If the bus error quota is set to infinite and the host CPU cannot keep up, the Janz VMOD-ICAN3 firmware will stop responding to control messages until the controller is reset. The firmware will automatically stop sending bus error messages when the quota is reached, and will only resume sending bus error messages when the quota is re-set to a positive value. This limitation is worked around by setting the bus error quota to one message, and then re-setting the quota to one message every time a bus error message is received. By doing this, the firmware never stops responding to control messages. The CAN bus can be reset without a hard-reset of the controller card. Signed-off-by: NIra W. Snyder <iws@ovro.caltech.edu> Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
-
由 Ira W. Snyder 提交于
The Janz VMOD-ICAN3 firmware does not support any sort of TX-done notification or interrupt. The driver previously used the hardware loopback to attempt to work around this deficiency, but this caused all sockets to receive all messages, even if CAN_RAW_RECV_OWN_MSGS is off. Using the new function ican3_cmp_echo_skb(), we can drop the loopback messages and return the original skbs. This fixes the issues with CAN_RAW_RECV_OWN_MSGS. A private skb queue is used to store the echo skbs. This avoids the need for any index management. Due to a lack of TX-error interrupts, bus errors are permanently enabled, and are used as a TX-error notification. This is used to drop an echo skb when transmission fails. Bus error packets are not generated if the user has not enabled bus error reporting. Signed-off-by: NIra W. Snyder <iws@ovro.caltech.edu> Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
-
由 Ira W. Snyder 提交于
The error and byte counter statistics were being incremented incorrectly. For example, a TX error would be counted both in tx_errors and rx_errors. This corrects the problem so that tx_errors and rx_errors are only incremented for errors caused by packets sent to the bus. Error packets generated by the driver are not counted. The byte counters are only increased for packets which are actually transmitted or received from the bus. Error packets generated by the driver are not counted. Signed-off-by: NIra W. Snyder <iws@ovro.caltech.edu> Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
-
由 Marc Kleine-Budde 提交于
This patch cleans up the ICAN3 to Linux CAN frame and vice versa conversion functions: - RX: Use get_can_dlc() to limit the dlc value. - RX+TX: Don't copy the whole frame, only copy the amount of bytes specified in cf->can_dlc. Acked-by: NIra W. Snyder <iws@ovro.caltech.edu> Tested-by: NIra W. Snyder <iws@ovro.caltech.edu> Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
-
由 Ira W. Snyder 提交于
The commit which added the janz-ican3 driver and commit 3ccd4c61 "can: Unify droping of invalid tx skbs and netdev stats" were committed into mainline Linux during the same merge window. Therefore, the addition of this code to the janz-ican3 driver was forgotten. This patch adds the expected code. Signed-off-by: NIra W. Snyder <iws@ovro.caltech.edu> Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
-
由 Ira W. Snyder 提交于
The code which used this variable was removed during review, before the driver was added to mainline Linux. It is now dead code, and can be removed. Signed-off-by: NIra W. Snyder <iws@ovro.caltech.edu> Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
-
由 Steffen Trumtrar 提交于
This patch adds support for a second clock to the flexcan driver. On modern freescale ARM cores like the imx53 and imx6q two clocks ("ipg" and "per") must be enabled in order to access the CAN core. In the original driver, the clock was requested without specifying the connection id, further all mainline ARM archs with flexcan support (imx28, imx25, imx35) register their flexcan clock without a connection id, too. This patch first renames the existing clk variable to clk_ipg and converts it to devm for easier error handling. The connection id "ipg" is added to the devm_clk_get() call. Then a second clock "per" is requested. As all archs don't specify a connection id, both clk_get return the same clock. This ensures compatibility to existing flexcan support and adds support for imx53 at the same time. After this patch hits mainline, the archs may give their existing flexcan clock the "ipg" connection id and implement a dummy "per" clock. This patch has been tested on imx28 (unmodified clk tree) and on imx53 with a seperate "ipg" and "per" clock. Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: NSteffen Trumtrar <s.trumtrar@pengutronix.de> Acked-by: NHui Wang <jason77.wang@gmail.com> Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
-
由 Marc Kleine-Budde 提交于
This patch marks the bittiming_const pointer as in the struct can_pric as "const". This allows us to mark the struct can_bittiming_const in the CAN drivers as "const", too. Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
-
由 Alexander Duyck 提交于
Instead of only setting the FCOE segmentation offload and CRC offload flags if we enable FCoE, we could just set them always since there are no modifications needed to the hardware or adapter FCoE structure in order to use these features. The advantage to this is that if FCoE enablement fails, for example because SR-IOV was enabled on 82599, we will still have use of the FCoE segmentation offload and Tx/Rx CRC offloads which should still help to improve the FCoE performance. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com> Tested-by: NRoss Brattain <ross.b.brattain@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Alexander Duyck 提交于
The current logic is enabling anti-spoof on all pools and then clearing anti-spoof on just the first PF pool. The correct approach is to only set anti-spoof on the VF pools and to leave all of the PF pools unchecked. This allows for items such as FCoE to use adjacent pools within the PF for transmit and receive queues without the traffic being blocked by this security feature. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com> Tested-by: NSibai Li <sibai.li@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Alexander Duyck 提交于
This change corrects an issue in which an FCoE enabled adapter was always setting the FCoE SAN MAC MPSAR register to 0x1. This results in the first VF being assigned the SAN MAC address in the case of SR-IOV and as such is incorrect. To resolve this I am adding a new function that will update the SAN MAC pool address after reset. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com> Tested-by: NRoss Brattain <ross.b.brattain@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Alexander Duyck 提交于
This patch changes the behavior of the FCoE configuration so that it is much closer to how the main body of the ixgbe driver works for ring allocation. The first piece is the ixgbe_fcoe_ddp_enable/disable calls. These allocate the percpu values and if successful set the fcoe_ddp_xid value indicating that we can support DDP. The next piece is the ixgbe_setup/free_ddp_resources calls. These are called on open/close and will allocate and free the DMA pools. Finally ixgbe_configure_fcoe is now just register configuration. It can go through and enable the registers for the FCoE redirection offload, and FIP configuration without any interference from the DDP pool allocation. The net result of all this is two fold. First it adds a certain amount of exception handling. So for example if ixgbe_setup_fcoe_resources fails we will actually generate an error in open and refuse to bring up the interface. Secondly it provides a much more graceful failure case than the previous model which would skip setting up the registers for FCoE on failure to allocate DDP resources leaving no Rx functionality enabled instead of just disabling DDP. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com> Tested-by: NRoss Brattain <ross.b.brattain@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Alexander Duyck 提交于
This change merges the 2 statistics values for noddp and noddp_ext_buff and the dma_pool into a single structure that can be allocated per CPU. The advantages to this are several fold. First we only need to do one alloc_percpu call now instead of 3, so that means less overhead for handling memory allocation failures. Secondly in the case of ixgbe_fcoe_ddp_setup we only need to call get_cpu once which makes things a bit cleaner since we can drop a put_cpu() from the exception path. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com> Tested-by: NRoss Brattain <ross.b.brattain@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Alexander Duyck 提交于
This change makes it so we always use the FCoE redirection table. We just set all 8 entries to the same value in the case of only having one queue for FCoE. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com> Tested-by: NRoss Brattain <ross.b.brattain@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Alexander Duyck 提交于
The networking side of the code had already been updated to use dma_ calls instead of the old pci_ calls. However it looks like the FCoE code was never updated. This change goes through and moves everything from the pci APIs to the dma APIs. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Alexander Duyck 提交于
The VF driver had a memory leak that would occur if VFs were assigned to a guest. The amount of leak would vary with the number of VFs but could max out at about 14K per PF. To reproduce the leak all you would need to do is enable all the VFs on the first PF. Then start a loop of loading and unloading the driver with max_vfs=63 for the first port. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com> Tested-by: NSibai Li <sibai.li@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Alexander Duyck 提交于
This change makes it so that we can use the VMDq ring feature offset value to determine the default pool instead of using num_vfs. The reason for this change is to avoid issues should we fail to allocate vfinfo but have pre-existing VFs. What should happen in this case is that num_vfs will go to 0, but the VMDq offset will contain the location of the first PF pool. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com> Tested-by: NSibai Li <Sibai.li@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
In its receive path, mlx4_en driver maps each page chunk that it pushes to the hardware and unmaps it when pushing it up the stack. This limits throughput to about 3Gbps on a Power7 8-core machine. One solution is to map the entire allocated page at once. However, this requires that we keep track of every page fragment we give to a descriptor. We also need to work with the discipline that all fragments will be released (in the sense that it will not be reused by the driver anymore) in the order they are allocated to the driver. This requires that we don't reuse any fragments, every single one of them must be reallocated. We do that by releasing all the fragments that are processed and only after finished processing the descriptors, we start the refill. We also must somehow guarantee that we either refill all fragments in a descriptor or none at all, without resorting to giving up a page fragment that we would have already given. Otherwise, we would break the discipline of only releasing the fragments in the order they were allocated. This has passed page allocation fault injections (restricted to the driver by using required-start and required-end) and device hotplug while 16 TCP streams were able to deliver more than 9Gbps. Signed-off-by: NThadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michal Schmidt 提交于
Dynamically allocated sysfs attributes must be initialized using sysfs_attr_init(), otherwise lockdep complains: BUG: key <address> not in .data! Signed-off-by: NMichal Schmidt <mschmidt@redhat.com> Acked-by: NBen Hutchings <bhutchings@solarflare.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Bjørn Mork 提交于
commit 9ac32e1b firmware: convert e100 driver to request_firmware() did a straight conversion of the in-driver ucode to external files. This introduced the possibility of the driver failing to enable an interface due to missing ucode. There was no evaluation of the importance of the ucode at the time. Based on comments in earlier versions of this driver, and in the source code for the FreeBSD fxp driver, we can assume that the ucode implements the "CPU Cycle Saver" feature on supported adapters. Although generally wanted, this is an optional feature. The ucode source is not available, preventing it from being included in free distributions. This creates unnecessary problems for the end users. Doing a network install based on a free distribution installer requires the user to download and insert the ucode into the installer. Making the ucode optional when possible improves the user experience and driver usability. The ucode for some adapters include a bugfix, making it essential. We continue to fail for these adapters unless the ucode is available. Signed-off-by: NBjørn Mork <bjorn@mork.no> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Christian Riesch 提交于
Since commit 16626b0c the asix driver depends on the phylib. Select phylib when the asix driver is selected. Reported-by: NFengguang Wu <fengguang.wu@intel.com> Cc: kernel-janitors@vger.kernel.org Signed-off-by: NChristian Riesch <christian.riesch@omicron.at> Tested-by: NFengguang Wu <fengguang.wu@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-