Rather than explicitly initializing many fields to 0, NULL, or false
in a newly-allocated message, just use kzalloc() for allocating new
messages.  This will become a much more convenient way of doing
things anyway for upcoming patches that abstract the data field.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

While processing an outgoing pagelist (either the data pagelist or
trail) in a ceph message, the messenger cycles through each of the
pages on the list.  This is accomplished in out_msg_pos_next(), if
the end of the first page on the list is reached, the first page is
moved to the end of the list.

There is a list operation, list_rotate_left(), which performs
exactly this operation, and by using it, what's really going on
becomes more obvious.

So replace these two list_move_tail() calls with list_rotate_left().
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Define a new function in_msg_pos_next() to match out_msg_pos_next(),
and use it in place of code at the end of read_partial_message_pages()
and read_partial_message_bio().

Note that the page number is incremented and offset reset under
slightly different conditions from before.  The result is
equivalent, however, as explained below.

Each time an incoming message is going to arrive, we find out how
much room is left--not surpassing the current page--and provide that
as the number of bytes to receive.  So the amount we'll use is the
lesser of:  all that's left of the entire request; and all that's
left in the current page.

If we received exactly how many were requested, we either reached
the end of the request or the end of the page.  In the first case,
we're done, in the second, we move onto the next page in the array.

In all cases but (possibly) on the last page, after adding the
number of bytes received, page_pos == PAGE_SIZE.  On the last page,
it doesn't really matter whether we increment the page number and
reset the page position, because we're done and we won't come back
here again.  The code previously skipped over that last case,
basically.  The new code handles that case the same as the others,
incrementing and resetting.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

There is only one caller for read_partial_message_bio(), and it
always passes &msg->bio_iter and &bio_seg as the second and third
arguments.  Furthermore, the message in question is always the
connection's in_msg, and we can get that inside the called function.

So drop those two parameters and use their derived equivalents.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Change the type of the "more" parameter from int to bool.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Some values printed are not (necessarily) in CPU order.  We already
have a copy of the converted versions, so use them.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

This is probably unnecessary but the code read as if it were wrong
in read_partial_message().
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

In ceph_con_in_msg_alloc() it is possible for a connection's
alloc_msg method to indicate an incoming message should be skipped.
By default, read_partial_message() initializes the skip variable
to 0 before it gets provided to ceph_con_in_msg_alloc().

The osd client, mon client, and mds client each supply an alloc_msg
method.  The mds client always assigns skip to be 0.

The other two leave the skip value of as-is, or assigns it to zero,
except:
    - if no (osd or mon) request having the given tid is found, in
      which case skip is set to 1 and NULL is returned; or
    - in the osd client, if the data of the reply message is not
      adequate to hold the message to be read, it assigns skip
      value 1 and returns NULL.
So the returned message pointer will always be NULL if skip is ever
non-zero.

Clean up the logic a bit in ceph_con_in_msg_alloc() to make this
state of affairs more obvious.  Add a comment explaining how a null
message pointer can mean either a message that should be skipped or
a problem allocating a message.

This resolves:
    http://tracker.ceph.com/issues/4324Reported-by: NGreg Farnum <greg@inktank.com>
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NGreg Farnum <greg@inktank.com>

An osd request defines information about where data to be read
should be placed as well as where data to write comes from.
Currently these are represented by common fields.

Keep information about data for writing separate from data to be
read by splitting these into data_in and data_out fields.

This is the key patch in this whole series, in that it actually
identifies which osd requests generate outgoing data and which
generate incoming data.  It's less obvious (currently) that an osd
CALL op generates both outgoing and incoming data; that's the focus
of some upcoming work.

This resolves:
    http://tracker.ceph.com/issues/4127Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

An osd request uses either pages or a bio list for its data.  Use a
union to record information about the two, and add a data type
tag to select between them.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Pull the fields in an osd request structure that define the data for
the request out into a separate structure.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Currently ceph_osdc_new_request() assigns an osd request's
r_num_pages and r_alignment fields.  The only thing it does
after that is call ceph_osdc_build_request(), and that doesn't
need those fields to be assigned.

Move the assignment of those fields out of ceph_osdc_new_request()
and into its caller.  As a result, the page_align parameter is no
longer used, so get rid of it.

Note that in ceph_sync_write(), the value for req->r_num_pages had
already been calculated earlier (as num_pages, and fortunately
it was computed the same way).  So don't bother recomputing it,
but because it's not needed earlier, move that calculation after the
call to ceph_osdc_new_request().  Hold off making the assignment to
r_alignment, doing it instead r_pages and r_num_pages are
getting set.

Similarly, in start_read(), nr_pages already holds the number of
pages in the array (and is calculated the same way), so there's no
need to recompute it.  Move the assignment of the page alignment
down with the others there as well.

This and the next few patches are preparation work for:
    http://tracker.ceph.com/issues/4127Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

(This is being reposted.  The first one had a problem because it
erroneously added a similar change elsewhere; that change has been
dropped.)

The next patch in this series points out that the calculation for
the number of pages in an osd request is getting done twice.  It
is not obvious, but the result of both calculations is identical.
This patch simplifies one of them--as a separate step--to make
it clear that the transformation in the next patch is valid.

In ceph_sync_write() there is some magic that computes page_align
for an osd request.  But a little analysis shows it can be
simplified.

First, we have:
 	io_align = pos & ~PAGE_MASK;
which is used here:
	page_align = (pos - io_align + buf_align) & ~PAGE_MASK;

Note (pos - io_align) simply rounds "pos" down to the nearest multiple
of the page size.

We also have:
 	buf_align = (unsigned long)data & ~PAGE_MASK;

Adding buf_align to that rounded-down "pos" value will stay within
the same page; the result will just be offset by the page offset for
the "data" pointer.  The final mask therefore leaves just the value
of "buf_align".

One more simplification.  Note that the result of calc_pages_for()
is invariant of which page the offset starts in--the only thing that
matters is the offset within the starting page.  We will have
put the proper page offset to use into "page_align", so just use
that in calculating num_pages.

This resolves:
    http://tracker.ceph.com/issues/4166Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

There's a spot that computes the number of pages to allocate for a
page-aligned length by just shifting it.  Use calc_pages_for()
instead, to be consistent with usage everywhere else.  The result
is the same.

The reason for this is to make it clearer in an upcoming patch that
this calculation is duplicated.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Currently, incoming mds messages never use page data, which means
there is no need to set the page_alignment field in the message.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NGreg Farnum <greg@inktank.com>

The only user of the ceph messenger that doesn't define an alloc_msg
method is the mds client.  Define one, such that it works just like
it did before, and simplify ceph_con_in_msg_alloc() by assuming the
alloc_msg method is always present.

This and the next patch resolve:
    http://tracker.ceph.com/issues/4322Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NGreg Farnum <greg@inktank.com>

In ceph_con_in_msg_alloc(), if no alloc_msg method is defined for a
connection a new message is allocated with ceph_msg_new().

Drop the mutex before making this call, and make sure we're still
connected when we get it back again.

This is preparing for the next patch, which ensures all connections
define an alloc_msg method, and then handles them all the same way.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NGreg Farnum <greg@inktank.com>

The purpose of ceph_calc_object_layout() is to fill in the pool
number and seed for a ceph_pg structure provided, based on a given
osd map and target object id.

Currently that function takes a file layout parameter, but the only
thing used out of that is its pool number.

Change the function so it takes a pool number rather than the full
file layout structure.  Only update the ceph_pg if the pool is found
in the osd map.  Get rid of few useless lines of code from the
function while there.

Since the function now very clearly just fills in the ceph_pg
structure it's provided, rename it ceph_calc_ceph_pg().
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

The pagelist_count field is never actually used, so get rid of it.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Two of the fields defining osd operations are defined using (char *)
while the data they represent are really untyped, not character
strings.  Change them to have type (void *).
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

The new cases added to osd_req_encode_op() caused a new sparse
error, which highlighted an existing problem that had been
overlooked since it was originally checked in.  When an unsupported
opcode is found the destination rather than the source opcode was
being used in the error message.  The two differ in their byte
order, and we want to be using the one in the source.

Fix the problem in both spots.
Reported-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

An osd request marked to linger will be re-submitted in the event
a connection to the target osd gets dropped.  Currently, if there
is a callback function associated with a request it will be called
each time a request is submitted--which for lingering requests can
be more than once.

Change it so a request--including lingering ones--will get completed
(from the perspective of the user of the osd client) exactly once.

This resolves:
    http://tracker.ceph.com/issues/3967Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

make __ceph_do_pending_vmtruncate() acquire the i_mutex if the caller
does not hold the i_mutex, so ceph_aio_read() can call safely.
Signed-off-by: NYan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: NGreg Farnum <greg@inktank.com>

ceph_aio_write() has an optimization that marks CEPH_CAP_FILE_WR
cap dirty before data is copied to page cache and inode size is
updated. The optimization avoids slow cap revocation caused by
balance_dirty_pages(), but introduces inode size update race. If
ceph_check_caps() flushes the dirty cap before the inode size is
updated, MDS can miss the new inode size. So just remove the
optimization.
Signed-off-by: NYan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: NGreg Farnum <greg@inktank.com>

commit 22cddde1 breaks the atomicity of write operation, it also
introduces a deadlock between write and truncate.
Signed-off-by: NYan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: NGreg Farnum <greg@inktank.com>

Conflicts:
	fs/ceph/addr.c

commit c6ffe100 moved the flag that tracks if the dcache contents
for a directory are complete to dentry. The problem is there are
lots of places that use ceph_dir_{set,clear,test}_complete() while
holding i_ceph_lock. but ceph_dir_{set,clear,test}_complete() may
sleep because they call dput().

This patch basically reverts that commit. For ceph_d_prune(), it's
called with both the dentry to prune and the parent dentry are
locked. So it's safe to access the parent dentry's d_inode and
clear I_COMPLETE flag.
Signed-off-by: NYan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: NGreg Farnum <greg@inktank.com>
Reviewed-by: NSage Weil <sage@inktank.com>

MDS ignores cap update message if migrate_seq mismatch, so when
receiving a cap import message with higher migrate_seq, set mds_want
according to the cap import message.
Signed-off-by: NYan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: NGreg Farnum <greg@inktank.com>

So the client will later send cap release message to MDS
Signed-off-by: NYan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: NGreg Farnum <greg@inktank.com>

commit 6e8575fa makes parse_reply_info_extra() return -EIO for LSSNAP
Signed-off-by: NYan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: NGreg Farnum <greg@inktank.com>

The page alignment field for a request is currently set in
ceph_osdc_build_request().  It's not needed at that point
nor do either of its callers need that value assigned at
any point before they call ceph_osdc_start_request().

So move that assignment into ceph_osdc_start_request().
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Use distinct fields for tracking the number of pages in a message's
page array and in a message's page list.  Currently only one or the
other is used at a time, but that will be changing soon.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

The only remaining reason to pass the osd request to calc_layout()
is to fill in its r_num_pages and r_page_alignment fields.  Once it
fills those in, it doesn't do anything more with them.

We can therefore move those assignments into the caller, and get rid
of the "req" parameter entirely.

Note, however, that the only caller is ceph_osdc_new_request(),
and that immediately overwrites those fields with values based on
its passed-in page offset.  So the assignment inside calc_layout()
was redundant anyway.

This resolves:
    http://tracker.ceph.com/issues/4262Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Move the formatting of the object name (oid) to use for an object
request into the caller of calc_layout().  This makes the "vino"
parameter no longer necessary, so get rid of it.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Have calc_layout() pass the computed object number back to its
caller.  (This is a small step to simplify review.)
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

The bio_seg field is used by the ceph messenger in iterating through
a bio.  It should never have a negative value, so make it an
unsigned.  (I contemplated making it unsigned short to match the
struct bio definition, but it offered no benefit.)

Change variables used to hold bio_seg values to all be unsigned as
well.  Change two variable names in init_bio_iter() to match the
convention used everywhere else.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

If an invalid layout is provided to ceph_osdc_new_request(), its
call to calc_layout() might return an error.  At that point in the
function we've already allocated an osd request structure, so we
need to free it (drop a reference) in the event such an error
occurs.

The only other value calc_layout() will return is 0, so make that
explicit in the successful case.

This resolves:
    http://tracker.ceph.com/issues/4240Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Pull ARM SoC fix from Olof Johansson:
 "A late-arriving fix for musb on OMAP4, resolving an issue where the
  musb IP won't be clocked and thus not functional.  Small in scope,
  most of the lines changed is a longish comment."

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: OMAP4: hwmod data: make 'ocp2scp_usb_phy_phy_48m" as the main clock

I think we could just move the full vm_iomap_memory() function into
util.h or similar, but I didn't get any reply from anybody actually
using nommu even to this trivial patch, so I'm not going to touch it any
more than required.

Here's the fairly minimal stub to make the nommu case at least
potentially work.  It doesn't seem like anybody cares, though.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull perf fix from Ingo Molnar:
 "This fix adds missing RCU read protection"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  events: Protect access via task_subsys_state_check()