Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 16 2月, 2011 4 次提交
    • B
      sfc: Add TX queues for high-priority traffic · 94b274bf
      由 Ben Hutchings 提交于 
      Implement the ndo_setup_tc() operation with 2 traffic classes.

Current Solarstorm controllers do not implement TX queue priority, but
they do allow queues to be 'paced' with an enforced delay between
packets.  Paced and unpaced queues are scheduled in round-robin within
two separate hardware bins (paced queues with a large delay may be
placed into a third bin temporarily, but we won't use that).  If there
are queues in both bins, the TX scheduler will alternate between them.

If we make high-priority queues unpaced and best-effort queues paced,
and high-priority queues are mostly empty, a single high-priority queue
can then instantly take 50% of the packet rate regardless of how many
of the best-effort queues have descriptors outstanding.

We do not actually want an enforced delay between packets on best-
effort queues, so we set the pace value to a reserved value that
actually results in a delay of 0.
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
      94b274bf
    • B
      sfc: Distinguish queue lookup from test for queue existence · 525da907
      由 Ben Hutchings 提交于 
      efx_channel_get_{rx,tx}_queue() currently return NULL if the channel
isn't used for traffic in that direction.  In most cases this is a
bug, but some callers rely on it as an existence test.

Add existence test functions efx_channel_has_{rx_queue,tx_queues}()
and use them as appropriate.

Change efx_channel_get_{rx,tx}_queue() to assert that the requested
queue exists.

Remove now-redundant initialisation from efx_set_channels().
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
      525da907
    • B
      sfc: Move TX queue core queue mapping into tx.c · 60031fcc
      由 Ben Hutchings 提交于 
      efx_hard_start_xmit() needs to implement a mapping which is the
inverse of tx_queue::core_txq.  Move the initialisation of
tx_queue::core_txq next to efx_hard_start_xmit() to make the
connection more obvious.
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
      60031fcc
    • B
      net: Adjust TX queue kobjects if number of queues changes during unregister · 5c56580b
      由 Ben Hutchings 提交于 
      If the root qdisc for a net device is mqprio, and the driver's
ndo_setup_tc() operation dynamically adds and remvoes TX queues,
netif_set_real_num_tx_queues() will be called during device
unregistration to remove the extra TX queues when the qdisc is
destroyed.  Currently this causes the corresponding kobjects
to be leaked, and the device's reference count never drops to 0.
Signed-off-by: NBen Hutchings <bhutchings@solarflare.com>
      5c56580b
  3. 15 2月, 2011 1 次提交
  5. 09 2月, 2011 14 次提交
  7. 08 2月, 2011 21 次提交