Hmm, it looks like the conversion to resource_size_t usage
(3776541d) requires some additional
fixups to cleanup the structure-pointer castings used during IO mapped
accesses to the chip.

There's only a small number of locations, where the driver uses IO
mapped accesses to the hardware, the patch below should take care of
it without introducing to many structural changes to code flow.
Signed-off-by: NAndrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

Set iscsi version to 2.0-868
Signed-off-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

The session age mask is only 4 bits, but session->age is 32. When
it gets larger then 15 and we try to or the bits some bits get
dropped and the check for session age in iscsi_verify_itt is useless.

The ISCSI_CID_MASK related bits are also useless since cid is always
one.
Signed-off-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

Some iscsi class messages have the dev_printk prefix and some libiscsi
and iscsi_tcp messages have "iscsi" or the module name as a prefix which
is normally pretty useless when trying to figure out which session
or connection the message is attached to. This patch adds iscsi lib
and class dev_printks so all messages have a common prefix that
can be used to figure out which object printed it.
Signed-off-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

There are 13 iscsi conn attrs, but since the IF/OF markers were not being
used we did not notice that we forgot to increment the ISCSI_CONN_ATTRS
counter.
Signed-off-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

If we rollover then we could get a next_timeout of zero, so we need
to set the new timer to that value.
Signed-off-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

qla4xxx has the old school startup/probe where it finds presetup sessions
in its flash and then attempts to log into them before returning from the
probe. This however, makes it very simple to add a iscsi class scan finished
helper which the driver can use.

In future patches Dave or I will rip apart the driver to make it more
like qla2xxx, but for now this is a very simple two line patch which
fixes the problem of trying to figure out when the initial sessions
are done being scanned.
Signed-off-by: NMike Christie <michaelc@cs.wisc.edu>
Cc: David Somayajulu <david.somayajulu@qlogic.com>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

In qla4xxx's probe it will call the iscsi session setup functions
for session that got setup on the initial start. This then makes
it easy for the iscsi class to export a helper which indicates
when those scans are done.
Signed-off-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

If qla4xxx is resetting up a session and the recovery timer
fires we do not want to just set it to dead, because
the dpc thread could have just set it to online and is in the
middle of resetting it up.
Signed-off-by: NMike Christie <michaelc@cs.wisc.edu>
Cc: David Somayajulu <david.somayajulu@qlogic.com>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

This just adds iscsi session scanning which works like fc rport scanning.
The future patches will hook the drivers into Mathew Wilcox's async
scanning infrastructure, so userspace does not have to special case
iscsi and so userspace does not have to make a extra special case for
hardware iscsi root scanning.
Signed-off-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

This has qla4xxx use the iscsi class's check ready function
in the queue command function, so all iscsi drivers return the
same error value for common problems.
Signed-off-by: NMike Christie <michaelc@cs.wisc.edu>
Cc: David Somayajulu <david.somayajulu@qlogic.com>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

Qla4xxx can just call the iscsi recovery functions directly.
There is no need for userspace to do this for qla4xxx, because
we do not use the mutex to iterate over devices anymore and iscsi_block
/unblock_session can be called from interrupt context or the dpc thread.
And having userspace do this just creates uneeded headaches for qla4xxx root
situations where the session may experience problems. For example
during the kernel shutdown the scsi layer wants to send sync caches, but at
this time userspace is not up (iscsid is not running), so we cannot
recover from the problem.
Signed-off-by: NMike Christie <michaelc@cs.wisc.edu>
Cc: David Somayajulu <david.somayajulu@qlogic.com>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

This adds a iscsi session state file which exports the session
state for both software and hardware iscsi. It also hooks libiscsi
in.
Signed-off-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

 - convert to accessors and !use_sg cleanup
Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
Tested-by: NRussell King <rmk@arm.linux.org.uk>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

This driver depends on the deprecated NCR53C9X core and needs to be converted
to the esp_scsi core.
Acked-by: NBoaz Harrosh <bharrosh@panasas.com>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

This patch fixes the calculation of the data transfer residual for the
case of a command that is supposed to transfer an odd number of bytes on
a wide bus but transfers nothing instead.
Signed-off-by: NTony Battersby <tonyb@cybernetics.com>
Cc: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

It should be desired that 64 KiB is available for ATAPI transferrring.
(Historically) in SCSI/block layer sector size is defined as 512 during
sector-byte calculation.
Originally in ps3rom.c CD_FRAMESIZE (2048) was used, which limited
/sys/block/sr0/queue/max_sectors_kb to 16 KiB (32 sectors).
Signed-off-by: NAegis Lin <aegislin@gmail.com>
Signed-off-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

Converted sun3x_esp driver to use esp_scsi.c
Signed-off-by: NThomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

__iscsi_complete_pdu() can now become static.
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Acked-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

The first patch (a119ee8e) was a bit
too aggressive and nested the locks (!) unit testing was in
error. This patch was reverted by
203a512f.

This new patch should fix the locks correctly.
Signed-off-by: NMark Salyzyn <aacraid@adaptec.com>
Signed-off-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/shaggy/jfs-2.6:
  BKL-removal: Implement a compat_ioctl handler for JFS
  BKL-removal: Use unlocked_ioctl for jfs

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (34 commits)
  Input: i8042 - non-x86 build fix
  Input: pxa27x_keypad - also enable on PXA3xx
  Input: pxa27x_keypad - add debounce_interval to the keypad platform data
  Input: pxa27x_keypad - use device resources for I/O memory mapping and IRQ
  Input: pxa27x_keypad - enable rotary encoders and direct keys
  Input: pxa27x_keypad - introduce pxa27x_keypad_config()
  Input: pxa27x_keypad - introduce driver structure and use KEY() to define matrix keys
  Input: pxa27x_keypad - remove pin configuration from the driver
  Input: pxa27x_keypad - rename the driver (was pxa27x_keyboard)
  Input: constify function pointer tables (seq_operations)
  Input: i8042 - add Fujitsu-Siemens Amilo Pro 2010 to nomux list
  Input: i8042 - enable DMI quirks on x86-64
  Input: i8042 - add Dritek quirk for Acer Aspire 9110
  Input: add input event to APM event bridge
  Input: mousedev - use BIT_MASK instead of BIT
  Input: remove duplicate includes
  Input: remove cdev from input_dev structure
  Input: remove duplicated headers in drivers/char/keyboard.c
  Input: i8042 - add Dritek keyboard extension quirk
  Input: add Tosa keyboard driver
  ...

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2:
  ocfs2: Negotiate locking protocol versions.

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6:
  sysfs: remove BUG_ON() from sysfs_remove_group()
  Driver core: Revert "Fix Firmware class name collision"
  Block: Fix whole_disk attribute bug

The ioctls were already compatible except for the actual values so this
was fairly easy to do.
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NDave Kleikamp <shaggy@linux.vnet.ibm.com>

Make sure we have enough room for all the GR registers or we'll end up
clobbering the AR index register (which should actually be harmless
unless the BIOS is making an assumption about it).
Noticed-by: NJens Axboe <jens.axboe@oracle.com>
Signed-off-by: NJesse Barnes <jesse.barnes@intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Convert jfs_ioctl over to not use the BKL. The only potential race
I could see was with two ioctls in parallel changing the flags
and losing the updates. Use the i_mutex to protect against this.
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NDave Kleikamp <shaggy@linux.vnet.ibm.com>

It's possible that the caller of sysfs_remove_group messed up and passed in an attribute group that was not really registered to this kobject.  But don't panic for such a foolish error, spit out a warning about what happened, and continue on our way safely.

Cc: Roland Dreier <rdreier@cisco.com>
Cc: Tejun Heo <htejun@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This reverts commit 109f0e93.

The original patch breaks BIOS updates on all Dell machines. The path to
the firmware file for the dell_rbu driver changes, which breaks all of
the userspace tools which rely on it.

Note that this patch re-introduces a problem with i2c name collision
that was previously fixed by this patch.
Signed-off-by: NMichael E Brown <michael_e_brown@dell.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The "whole_disk" attribute was not properly converted in the block
device conversion earlier, and if the file is read, bad things can
happen.  This patch fixes this, making the attribute an empty one,
preserving the original functionality.

Many thanks to David Miller for finding this, and pointing me in the
proper place within the block code to look.
Acked-by: NDavid S. Miller <davem@davemloft.net>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  [SPARC32]: Use regsets in arch_ptrace().
  [SPARC64]: Use regsets in arch_ptrace().
  [SPARC32]: Use regsets for ELF core dumping.
  [SPARC64]: Use regsets for ELF core dumping.
  [SPARC64]: Remove unintentional ptrace debugging messages.
  [SPARC]: Move over to arch_ptrace().
  [SPARC]: Remove PTRACE_SUN* handling.
  [SPARC]: Kill DEBUG_PTRACE code.
  [SPARC32]: Add user regset support.
  [SPARC64]: Add user regsets.
  [SPARC64]: Fix booting on non-zero cpu.

* git://git.infradead.org/mtd-2.6: (120 commits)
  [MTD] Fix mtdoops.c compilation
  [MTD] [NOR] fix startup lock when using multiple nor flash chips
  [MTD] [DOC200x] eccbuf is statically defined and always evaluate to true
  [MTD] Fix maps/physmap.c compilation with CONFIG_PM
  [MTD] onenand: Add panic_write function to the onenand driver
  [MTD] mtdoops: Use the panic_write function when present
  [MTD] Add mtd panic_write function pointer
  [MTD] [NAND] Freescale enhanced Local Bus Controller FCM NAND support.
  [MTD] physmap.c: Add support for multiple resources
  [MTD] [NAND] Fix misparenthesization introduced by commit 78b65179...
  [MTD] [NAND] Fix Blackfin NFC ECC calculating bug with page size 512 bytes
  [MTD] [NAND] Remove wrong operation in PM function of the BF54x NFC driver
  [MTD] [NAND] Remove unused variable in plat_nand_remove
  [MTD] Unlocking all Intel flash that is locked on power up.
  [MTD] [NAND] at91_nand: Make mtdparts option can override board info
  [MTD] mtdoops: Various minor cleanups
  [MTD] mtdoops: Ensure sequential write to the buffer
  [MTD] mtdoops: Perform write operations in a workqueue
  [MTD] mtdoops: Add further error return code checking
  [MTD] [NOR] Test devtype, not definition in flash_probe(), drivers/mtd/devices/lart.c
  ...

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (112 commits)
  ACPI: fix build warning
  Revert "cpuidle: build fix for non-x86"
  ACPI: update intrd DSDT override console messages
  ACPI: update DSDT override documentation
  ACPI: Add "acpi_no_initrd_override" kernel parameter
  ACPI: its a directory not a folder....
  ACPI: misc cleanups
  ACPI: add missing prink prefix strings
  ACPI: cleanup acpi.h
  ACPICA: fix CONFIG_ACPI_DEBUG_FUNC_TRACE build
  ACPI: video: Ignore ACPI video devices that aren't present in hardware
  ACPI: video: reset brightness on resume
  ACPI: video: call ACPI notifier chain for ACPI video notifications
  ACPI: create notifier chain to get hotkey events to graphics driver
  ACPI: video: delete unused display switch on hotkey event code
  ACPI: video: create "brightness_switch_enabled" modparam
  cpuidle: Add a poll_idle method
  ACPI: cpuidle: Support C1 idle time accounting
  ACPI: enable MWAIT for C1 idle
  ACPI: idle: Fix acpi_safe_halt usages and interrupt enabling/disabling
  ...

* 'for-linus' of git://git.o-hand.com/linux-rpurdie-backlight:
  backlight: Add OMAP1 PWL backlight driver
  backlight: Avoid unecessary driver callbacks

* 'for-linus' of git://git.o-hand.com/linux-rpurdie-leds:
  leds: Add HP Jornada 6xx driver
  leds: Remove the now uneeded ixp4xx driver
  leds: Add power LED to the wrap driver
  leds: Fix led-gpio active_low default brightness
  leds: hw acceleration for Clevo mail LED driver
  leds: Add support for hardware accelerated LED flashing
  leds: Standardise LED naming scheme
  leds: Add clevo notebook LED driver

The recently introduced page walker (walk_page_range()) calls pgd_offset with a
const struct mm_struct pointer, causing the following compile warning on m68k:

    mm/pagewalk.c:111: warning: passing argument 1 of 'pgd_offset' discards qualifiers from pointer target type

Make the `mm' parameter of the inline function pgd_offset() const to shut it
up.
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'drm-patches' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (22 commits)
  drm: add initial r500 drm support
  radeon: setup the ring buffer fetcher to be less agressive.
  drm: fixup some of the ioctl function exit paths
  drm: the drm really should call pci_set_master..
  i915: Add chipset id for Intel Integrated Graphics Device
  drm: cleanup DRM_DEBUG() parameters
  drm/i915: add support for E7221 chipset
  drm: don't cast a pointer to pointer of list_head
  mga_dma: return 'err' not just zero from mga_do_cleanup_dma()
  drm: add _DRM_DRIVER flag, and re-order unload.
  drm: enable udev node creation
  drm: Make DRM_IOCTL_GET_CLIENT return EINVAL when it can't find client #idx.
  drm: move drm_mem_init to proper place in startup sequence
  drm: call driver load function after initialising AGP
  drm: Fix ioc32 compat layer
  drm: fd.o bug #11895: Only add the AGP base to map offset if the caller didn't.
  i915: add suspend/resume support
  drm: update DRM sysfs support
  drm: Initialize the AGP structure's base address at init rather than enable.
  drm: move two function extern into the correct block
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq:
  [CPUFREQ] Add missing printk levels to e_powersaver
  [CPUFREQ] Fix sparse warning in powernow-k8
  [CPUFREQ] Support Model D parts and newer in e_powersaver
  [CPUFREQ] Powernow-k8: Update to support the latest Turion processors
  [CPUFREQ] fix configuration help message
  [CPUFREQ] powernow-k8 print pstate instead of fid/did for family 10h
  [CPUFREQ] Eliminate cpufreq_userspace scaling_setspeed deadlock
  [CPUFREQ] gx-suspmod.c: use boot_cpu_data instead of current_cpu_data
  [CPUFREQ] fix incorrect comment on show_available_freqs() in freq_table.c
  [CPUFREQ] drivers/cpufreq: Add missing "space"
  [CPUFREQ] arch/x86: Add missing "space"
  [CPUFREQ] Remove pointless Kconfig dependancy

* 'for-2.6.25' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (69 commits)
  [POWERPC] Add SPE registers to core dumps
  [POWERPC] Use regset code for compat PTRACE_*REGS* calls
  [POWERPC] Use generic compat_sys_ptrace
  [POWERPC] Use generic compat_ptrace_request
  [POWERPC] Use generic ptrace peekdata/pokedata
  [POWERPC] Use regset code for PTRACE_*REGS* requests
  [POWERPC] Switch to generic compat_binfmt_elf code
  [POWERPC] Switch to using user_regset-based core dumps
  [POWERPC] Add user_regset compat support
  [POWERPC] Add user_regset_view definitions
  [POWERPC] Use user_regset accessors for GPRs
  [POWERPC] ptrace accessors for special regs MSR and TRAP
  [POWERPC] Use user_regset accessors for SPE regs
  [POWERPC] Use user_regset accessors for altivec regs
  [POWERPC] Use user_regset accessors for FP regs
  [POWERPC] mpc52xx: fix compile error introduce when rebasing patch
  [POWERPC] 4xx: PCIe indirect DCR spinlock fix.
  [POWERPC] Add missing native dcr dcr_ind_lock spinlock
  [POWERPC] 4xx: Fix offset value on Warp board
  [POWERPC] 4xx: Add 440EPx Sequoia ehci dts entry
  ...

Add new card (0x1393:0x1143) support added in 1.11 original driver, also
allow rate change in set_serial_info ioctl (as per 1.11 too).
Signed-off-by: NJiri Slaby <jirislaby@gmail.com>
Reviewed-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>