- 29 10月, 2009 6 次提交
-
-
由 Bruce Allan 提交于
When changing flow control (pause) parameters, the flow control thresholds (i.e. when to send XON/XOFF frames) may not be setup correctly on parts with copper media. Call the existing e1000_set_fc_watermarks() function to set these thresholds. Signed-off-by: NBruce Allan <bruce.w.allan@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yi Zou 提交于
Implements the netdev_ops.ndo_fcoe_get_wwn for VLAN device. Signed-off-by: NYi Zou <yi.zou@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yi Zou 提交于
Implements the netdev_ops.ndo_fcoe_get_wwn in 82599 if it finds valid prefix for the World Wide Node Name (WWNN) or World Wide Port Name (WWPN), as well as valid SAN MAC address. Signed-off-by: NYi Zou <yi.zou@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yi Zou 提交于
Add ndo_fcoe_get_wwn so Fiber Channel over Ethernet (FCoE) can make use of the provided World Wide Port Name (WWPN) and World Wide Node Name (WWNN) from the underlying network interface driver. Signed-off-by: NYi Zou <yi.zou@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yi Zou 提交于
The 82599 EEPROM supports alternative prefix for World Wide Node Name (WWNN) and World Wide Port Name (WWPN). The prefixes can be used together with the SAN MAC address to form the WWNN and WWPN, which can be used by upper layer drivers such as Fiber Channel over Ethernet (FCoE). Signed-off-by: NYi Zou <yi.zou@intel.com> Acked-by: NPeter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shreyas Bhatewara 提交于
Remove duplicate headerfile includes from vmxnet3_int.h Signed-off-by: NShreyas Bhatewara <sbhatewara@vmware.com> Signed-off-by: NHuang Weiyi <weiyi.huang@gmail.com> Signed-off-by: NBhavesh Davda <bhavesh@vmware.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 28 10月, 2009 34 次提交
-
-
由 Sarveshwar Bandi 提交于
Update ethtool get_settings function to: - get current link speed settings from controller - get port transceiver type from controller - fill appropriate values for supported, phy_address Signed-off-by: NSarveshwar Bandi <sarveshwarb@serverengines.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Graham 提交于
Devices with loadable firmware must have their firmware reloaded after the system resumes from sleep, but the request_firmare() API is not available at this point in the resume flow because tasks are not yet running, and the system will hang if it is called. Work around this issue by only calling request_firmware() for a device's first firmware load, and cache a copy of the pointer to the firmware blob for that device, so that we may reload firmware images even during resume. Signed-off-by: NDavid Graham <david.graham@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dhananjay Phadke 提交于
Signed-off-by: NDhananjay Phadke <dhananjay@netxen.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dhananjay Phadke 提交于
Add MODULE_FIRMWARE hints for various firmware file types, required by different chip revisions. Signed-off-by: NDhananjay Phadke <dhananjay@netxen.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dhananjay Phadke 提交于
Update module info with QLogic signature. Signed-off-by: NDhananjay Phadke <dhananjay@netxen.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dhananjay Phadke 提交于
Add PCI vendor and device IDs for QLE8240 and QLE8242 CNA devices. Signed-off-by: NDhananjay Phadke <dhananjay@netxen.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dhananjay Phadke 提交于
Refactor code to calculate and set indirect access window for control registers in 2MB address space (NX3031 or newer). Use void __iomem * data type for absolute pci addresses. Signed-off-by: NDhananjay Phadke <dhananjay@netxen.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Amit Kumar Salecha 提交于
Add support for extracting firmware from a unified file format which embeds firmware images for all chip revisions. Fallback to orginal file formats if new image is not found. Signed-off-by: NAmit Kumar Salecha <amit@netxen.com> Signed-off-by: NDhananjay Phadke <dhananjay@netxen.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ben Hutchings 提交于
via-velocity maintains a list of its devices in order to determine whether a netdev notification applies to one of them. That can be determined simply by checking the netdev_ops pointer, so the list can be removed. Compile-tested only. Signed-off-by: NBen Hutchings <ben@decadent.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andreas Petlund 提交于
Corrected a spelling error in a function name. Signed-off-by: NAndreas Petlund <apetlund@simula.no> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
commit d519e17e (net: export device speed and duplex via sysfs) made the wrong assumption that netdev->ethtool_ops was always set. This makes possible to crash kernel and let rtnl in locked state. modprobe dummy ip link set dummy0 up (udev runs and crash) Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Acked-by: NAndy Gospodarek <andy@greyhouse.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Atsushi Nemoto 提交于
This driver has NAPI code but it has been disabled. Enable it now. The non-napi code will be removed lator. Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Atsushi Nemoto 提交于
Return received count correctly even if tx completed at the same time. Currently NAPI is disabled for this driver so this patch does not fix any real problem. Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Figo.zhang 提交于
Add support NAPI Rx API for KS8695NET driver. v2, change the Rx function to NAPI. in <KS8695X Integrated Multi-port Gateway Solution Register Description v1.0>: Interrupt Enable Register (offset 0xE204) Bit29 : WAN MAC Receive Interrupt Enable Bit16 : LAN MAC Receive Interrupt Enable Interrupt Status Register (Offset 0xF208) Bit29: WAN MAC Receive Status Bit16: LAN MAC Receive Status see arch/arm/mach-ks8695/devices.c: ks8695_wan_resources[] and ks8695_lan_resources[] have IORESOURCE_IRQ , it have define the RX irq, for wan, irq = 29; for lan ,irq = 16. so we can do this read the interrupt status: unsigned long mask_bit = 1 << ksp->rx_irq; status = readl(KS8695_IRQ_VA + KS8695_INTST); Signed-off-by: NFigo.zhang <figo1802@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
drivers/net/igb/igb_ethtool.c: In function ‘igb_set_ringparam’: drivers/net/igb/igb_ethtool.c:744: warning: comparison of distinct pointer types lacks a cast drivers/net/igb/igb_ethtool.c:748: warning: comparison of distinct pointer types lacks a cast Casts were to u16 on the constant, but the type of new_{r,t}x_count is u32. Cast to u32 instead. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
This patch goes through and cleans up whitespace issues in igb_main.c to help improve readability. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
Going forward the plan is to have the MACs support SCTP checksum offloads so change the check from == to >=. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
Limit the minimum mtu to 68 in order to prevent ip from being unbound from the interface. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
This patch relpaces several references to adapter->pdev->dev with just pdev->dev. This allows for cleanup of several multiline dev_err/info calls. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
This patch just cleans up some unecessary references to the adapter->hw member when it has already been placed in a local variable named hw. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
This patch cleans up some whitespace issues in clean_rx_irq_adv. It also adds NUMA aware page allocation and dma error handling to alloc_rx_buffers_adv. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
This patch cleans up the xmit frame path for igb to better handle xmit frame errors and avoid null pointer exceptions. It also cleans up some whitespace issues found in the xmit frame path. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
This patch changes the layout of the ring and adapter structs to fill a few holes in the structure. It also cleans up some whitespace and formatting issues. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
There are several counters being used like they are static when in fact they are clear on read. In order to prevent the values from being incorrect I am removing the defunct counters. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
This patch changes a few things so that instead of firing a link status interrupt directly the get_link_status bit is set and the watchdog is scheduled. In addition the mailbox bit is now only enabled if VFs are enabled. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
This patch changes the queue ordering for 82576 adapters so that if VFs are enabled the queues will first be allocated out of the PF pool. Any remaining queues will be allocated out of other VMDq pools. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
This patch cleans up some of the ring alloc and free code to better handle exceptions such as attempting to free resources on an already freed ring. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
This change makes the tx hang check run over all tx queues instead of just queue 0. Also have hang display info on EOP descriptor instead of the descriptor at the start of the chain. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
This change moves global_quad_port_a into igb_probe as a static define since it doesn't actually need to be global. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
This patch moves the update of adapter->net_stats.rx/tx values out of the interrupt routine and into igb_update_stats by just adding together the tx/rx byte/packet counts for the rings. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
This patch moves VF initialization into a seperate function to help improve the readability of igb_probe. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
This patch corrects some errors in how vlans are being handled when vfs start interacting with the management vlans. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
This patch updates the use of the VMOLR to include enabling multicast promiscous for the VFs should they attempt to send over 30 multicast addresses or if they use the new message type to enable multicast promiscuous. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Duyck 提交于
In order to support future features it is easiest to replace the clear_to_send boolean with a flag value. Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-