A LAYOUTCOMMIT then subsequent GETATTR may both return the same attributes,
and in that case NFS_INO_INVALID_ATTR is never set on the second pass
through nfs_update_inode().  The existing check to skip the clearing of
NFS_INO_INVALID_ATTR if a LAYOUTCOMMIT is outstanding does not help in this
case (see commit 10b7e9ad: "pNFS: Don't mark the inode as revalidated
if a LAYOUTCOMMIT is outstanding").  We know that if a LAYOUTCOMMIT is
outstanding then attributes will need upating, so always set
NFS_INO_INVALID_ATTR.
Signed-off-by: NBenjamin Coddington <bcodding@redhat.com>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

Use the minor version ops cached in struct nfs_client instead of looking
them up again.
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

Replace it with a test for whether or not the sent a stateid in violation
of what we asked for.
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

Make it static
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

Fix the report:

net/sunrpc/clnt.c:2580:1: warning: ‘static’ is not at beginning of declaration [-Wold-style-declaration]
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

It's not visible yet, and won't be until after we grab the inode->i_lock.
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

...instead of splitting the initialisation over init_lseg() and
pnfs_layout_process().
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

The layout stateid will be invalidated once it holds no more layout
segments anyway.
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

That's already being taken care of in pnfs_layout_remove_lseg().
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

If the server changed the layout stateid's "other" field, then
we should treat the old layout as being completely gone. In that
case, we want to clear the metadata such as scheduled layoutreturns.

Do this by calling pnfs_mark_layout_stateid_invalid().
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

Ensure nfs42_layoutstat_done() layoutget don't open code layout stateid
invalidation.
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

When determining which layout segments to return, we do want
pnfs_mark_matching_lsegs_return to check that they match the layout
sequence id. This ensures that we don't waste time if the server
is replaying a layout recall that has already been satisfied.
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

In cases where we need to send a layoutreturn in order to propagate
an error, we should not tie that to a specific layout stateid.
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

When we return NFS_OK to the CB_LAYOUTRECALL, we are required to
send a layoutreturn that "completes" that layout recall request, using
the correct stateid.
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

We want to evaluate in this order:

If the client holds no layout for this inode, then return
NFS4ERR_NOMATCHING_LAYOUT; it probably forgot the layout.

If the client finds the inode among the list of layouts, but the corresponding
stateid has not yet been initialised, then return NFS4ERR_DELAY to ask the
server to retry once the outstanding LAYOUTGET is complete.

If the current layout stateid's "other" field does not match the recalled
stateid, return NFS4ERR_BAD_STATEID.

If already processing a layout recall with a newer stateid, return
NFS4ERR_OLD_STATEID. This can only happens for servers that are
non-compliant with the NFSv4.1 protocol.

If already processing a layout recall with an older stateid, return
NFS4ERR_DELAY to ask the server to retry once the outstanding
LAYOUTRETURN is complete. Again, this is technically incompliant with
the NFSv4.1 protocol.

If the current layout sequence id is newer than the recalled stateid's
sequence id, return NFS4ERR_OLD_STATEID. This too implies protocol
non-compliance.

If the current layout sequence id is older than the recalled stateid's
sequence id+1, return NFS4ERR_DELAY.
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

Currently, pnfs_set_layout_stateid() will update the layout sequence
id barrier only if the stateid itself is newer than the current
layout stateid. However in a situation where multiple LAYOUTGET calls
and a LAYOUTRETURN raced, it is entirely possible for one of the
LAYOUTGET to set the current stateid to something newer than the
LAYOUTRETURN that needs to set the barrier.

The fix is to allow the "update_barrier" flag to force a check as to
whether or not the barrier needs to be updated.
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

If the layout stateid is invalid, then pnfs_set_layout_stateid() must
always initialise it.
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

Ensure that we don't carry over layoutreturn info from a previous
incarnation of this layout.
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

If the layout was completely returned, then ignore the returned layout
stateid.
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

Needed in order to work on top of pNFS changes in Linus' upstream kernel.

NFS doesn't expect requests with wb_bytes set to zero and may make
unexpected decisions about how to handle that request at the page IO layer.
Skip request creation if we won't have any wb_bytes in the request.
Signed-off-by: NBenjamin Coddington <bcodding@redhat.com>
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Reviewed-by: NWeston Andros Adamson <dros@primarydata.com>
Cc: stable@vger.kernel.org
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

When bl_parse_deviceid() fails in bl_alloc_deviceid_node() on
blkdev_get_by_*() step we get an pnfs_block_dev struct that is
uninitialized except for bdev field which is set to whatever error
blkdev_get_by_*() returns.  bl_free_device() then tries to call
blkdev_put() if bdev is not 0 resulting in a wrong pointer dereference.

Fixing this by setting bdev in struct pnfs_block_dev only if we didn't
get an error from blkdev_get_by_*().
Signed-off-by: NArtem Savkov <asavkov@redhat.com>
Reviewed-by: NBenjamin Coddington <bcodding@redhat.com>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

All write callbacks are required to call nfs_writeback_update_inode() upon
success to ensure that file size changes are recorded, and the attribute
cache is invalidated.
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

NFS: NFSoRDMA Cleanup

Fixes an unnecessary semicolon warning found by the kbuild robot.
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

net/sunrpc/xprtrdma/verbs.c:798:2-3: Unneeded semicolon

 Remove unneeded semicolon.

Generated by: scripts/coccinelle/misc/semicolon.cocci

CC: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: NFengguang Wu <fengguang.wu@intel.com>
Reviewed-by: NChuck Lever <chuck.lever@oracle.com>
Signed-off-by: NAnna Schumaker <Anna.Schumaker@Netapp.com>

The current min/max resvport settings are independently limited
by the entire range of allowed ports, so max_resvport can be
set to a port lower than min_resvport.

Prevent inversion of min/max values when set through sysfs and
module parameter by setting the limits dependent on each other.
Signed-off-by: NFrank Sorenson <sorenson@redhat.com>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

The current min/max resvport settings are independently limited
by the entire range of allowed ports, so max_resvport can be
set to a port lower than min_resvport.

Prevent inversion of min/max values when set through sysctl by
setting the limits dependent on each other.
Signed-off-by: NFrank Sorenson <sorenson@redhat.com>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

The range calculation for choosing the random reserved port will panic
with divide-by-zero when min_resvport == max_resvport, a range of one
port, not zero.

Fix the reserved port range calculation by adding one to the difference.
Signed-off-by: NFrank Sorenson <sorenson@redhat.com>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

Author: Frank Sorenson <sorenson@redhat.com>
Date:   2016-06-27 13:55:48 -0500

    sunrpc: Fix bit count when setting hashtable size to power-of-two

    The hashtable size is incorrectly calculated as the next higher
    power-of-two when being set to a power-of-two.  fls() returns the
    bit number of the most significant set bit, with the least
    significant bit being numbered '1'.  For a power-of-two, fls()
    will return a bit number which is one higher than the number of bits
    required, leading to a hashtable which is twice the requested size.

    In addition, the value of (1 << nbits) will always be at least num,
    so the test will never be true.

    Fix the hash table size calculation to correctly set hashtable
    size, and eliminate the unnecessary check.
Signed-off-by: NFrank Sorenson <sorenson@redhat.com>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

Signed-off-by: NTigran Mkrtchyan <tigran.mkrtchyan@desy.de>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

result:

$ mount -o vers=4.1 dcache-lab007:/ /pnfs
$ cp /etc/profile /pnfs
tcp        0      0 131.169.185.68:1005     131.169.191.141:32049   ESTABLISHED
tcp        0      0 131.169.185.68:751      131.169.191.144:2049    ESTABLISHED
$

$ mount -o vers=4.1,noresvport dcache-lab007:/ /pnfs
$ cp /etc/profile /pnfs
tcp        0      0 131.169.185.68:34894    131.169.191.141:32049   ESTABLISHED
tcp        0      0 131.169.185.68:35722    131.169.191.144:2049    ESTABLISHED
$
Signed-off-by: NTigran Mkrtchyan <tigran.mkrtchyan@desy.de>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

The last put of deviceid nodes for SCSI layouts may sleep, so we shouldn't
hold any spinlocks.  Make sure we put them outside the bl_ext_lock.
Signed-off-by: NBenjamin Coddington <bcodding@redhat.com>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

A generic_cred can be used to look up a unx_cred or a gss_cred, so it's
not really safe to use the the generic_cred->acred->ac_flags to store
the NO_CRKEY_TIMEOUT flag.  A lookup for a unx_cred triggered while the
KEY_EXPIRE_SOON flag is already set will cause both NO_CRKEY_TIMEOUT and
KEY_EXPIRE_SOON to be set in the ac_flags, leaving the user associated
with the auth_cred to be in a state where they're perpetually doing 4K
NFS_FILE_SYNC writes.

This can be reproduced as follows:

1. Mount two NFS filesystems, one with sec=krb5 and one with sec=sys.
They do not need to be the same export, nor do they even need to be from
the same NFS server.  Also, v3 is fine.
$ sudo mount -o v3,sec=krb5 server1:/export /mnt/krb5
$ sudo mount -o v3,sec=sys server2:/export /mnt/sys

2. As the normal user, before accessing the kerberized mount, kinit with
a short lifetime (but not so short that renewing the ticket would leave
you within the 4-minute window again by the time the original ticket
expires), e.g.
$ kinit -l 10m -r 60m

3. Do some I/O to the kerberized mount and verify that the writes are
wsize, UNSTABLE:
$ dd if=/dev/zero of=/mnt/krb5/file bs=1M count=1

4. Wait until you're within 4 minutes of key expiry, then do some more
I/O to the kerberized mount to ensure that RPC_CRED_KEY_EXPIRE_SOON gets
set.  Verify that the writes are 4K, FILE_SYNC:
$ dd if=/dev/zero of=/mnt/krb5/file bs=1M count=1

5. Now do some I/O to the sec=sys mount.  This will cause
RPC_CRED_NO_CRKEY_TIMEOUT to be set:
$ dd if=/dev/zero of=/mnt/sys/file bs=1M count=1

6. Writes for that user will now be permanently 4K, FILE_SYNC for that
user, regardless of which mount is being written to, until you reboot
the client.  Renewing the kerberos ticket (assuming it hasn't already
expired) will have no effect.  Grabbing a new kerberos ticket at this
point will have no effect either.

Move the flag to the auth->au_flags field (which is currently unused)
and rename it slightly to reflect that it's no longer associated with
the auth_cred->ac_flags.  Add the rpc_auth to the arg list of
rpcauth_cred_key_to_expire and check the au_flags there too.  Finally,
add the inode to the arg list of nfs_ctx_key_to_expire so we can
determine the rpc_auth to pass to rpcauth_cred_key_to_expire.
Signed-off-by: NScott Mayhew <smayhew@redhat.com>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

When older servers return RPC_AUTH_NULL, it means the
rpc creds will be ignored. In that case use the sec=
that was specified instead of setting sec=null

Fixes Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1112983Signed-off-by: NSteve Dickson <steved@redhat.com>
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>

We want to recover the open stateid if there is no layout stateid
and/or the stateid argument matches an open stateid.
Otherwise throw out the existing layout and recover from scratch, as
the layout stateid is bad.

Fixes: 183d9e7b ("pnfs: rework LAYOUTGET retry handling")
Cc: stable@vger.kernel.org # 4.7
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
Reviewed-by: NJeff Layton <jlayton@redhat.com>

Instead of giving up altogether and falling back to doing I/O
through the MDS, which may make the situation worse, wait for
2 lease periods for the callback to resolve itself, and then
try destroying the existing layout.

Only if this was an attempt at getting a first layout, do we
give up altogether, as the server is clearly crazy.

Fixes: 183d9e7b ("pnfs: rework LAYOUTGET retry handling")
Cc: stable@vger.kernel.org # 4.7
Signed-off-by: NTrond Myklebust <trond.myklebust@primarydata.com>
Reviewed-by: NJeff Layton <jlayton@redhat.com>