Batchbuffers constructed by userspace can conditionalise their URB
allocations through the use of the MI_SET_PREDICATE command. This
command can read the MI_PREDICATE_RESULT_2 register to see how many
slices are enabled on GT3, and by virtue of the result, scale their
memory allocations to fit enabled memory.

Of course, this only works if the kernel sets the appropriate bit in the
register first.

v2: Better commit subject and message by Chris Wilson.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Credits-to: Yejun Guo <yejun.guo@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@gmail.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This fixes a printf warn from gcc:

drivers/gpu/drm/i915/intel_dsi_cmd.c: In function ‘dsi_vc_send_long’:
drivers/gpu/drm/i915/intel_dsi_cmd.c:181:2: warning: format ‘%x’ expects argument of type ‘unsigned int’, but argument 7 has type ‘size_t’ [-Wformat=]
Suggested-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Initial parsing of the VBT MIPI block. For now, just store the panel id
if found.

Note: Again there seems to be no documentation for this piece of lore.
The doc situation for byt+ is just a bad joke :(
Signed-off-by: NShobhit Kumar <shobhit.kumar@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Note: No one seems to have docs for this, so this patch here is just
unreviewed black magic :(
Signed-off-by: NShobhit Kumar <shobhit.kumar@intel.com>
Signed-off-by: Nymohanma <yogesh.mohan.marimuthu@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
[danvet: Add note about the doc situation.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

DPLL is not needed for DSI

v2: Rebase due to added DSI PLL assertion patch.
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NShobhit Kumar <shobhit.kumar@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

For DSI, we need to be asserting DSI PLL, not DPLL.

This is a somewhat stopgap implementation. It's slightly ugly to have to
pass the dsi parameter to intel_enable_pipe().
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

v2:
 - Grab dpio_lock mutex in vlv_enable_dsi_pll().
 - Add and call vlv_disable_dsi_pll().

v3: Mostly based on Ville's review comments.
 - Only pipe A has DSI PLL lock bit.
 - Add more of CCK REG bit definitions for DSI PLL.
 - Make tables static.
 - Move clock gating out of the clock calculation functions.
 - DSI PLL LDO power gating.
 - Put alternative MNP from table calc behind #ifdef.

v4: s/CKK/CLK/ in the CCK REG bit definitions (Ville).
Signed-off-by: Nymohanma <yogesh.mohan.marimuthu@intel.com>
Signed-off-by: NShobhit Kumar <shobhit.kumar@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This does not include any panel specific sub-encoders yet.

v2: Fix fixed mode handling (Daniel)

v3: Mostly based on Ville's review comments.
 - Fix MIPI_HS_TX_TIMEOUT.
 - DPI_ENABLE only for video mode.
 - Drop ULPS usage for now, use DEVICE_READY only.
 - Set MIPI_INIT_COUNT based on txclkesc.
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NShobhit Kumar <shobhit.kumar@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

v2: Rebase due to register bit definition change.

v3: Mostly based on Ville's review comments.
 - Use size_t for length all around.
 - Reuse dsi_vc_send_short in dsi_vc_send_long.
 - Remove stale/incorrect comments.
 - Reverse special packet sent interrupt check.
 - Use DSI controller regs for reading, not adapter.
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The sub-encoder model is copied from DVO.

v2: Add attached_connector to struct intel_dsi.
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NShobhit Kumar <shobhit.kumar@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Add definitions for VLV MIPI DSI registers.

v2: Small fixes per Ville's review comments.
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

v2: Add comment this is pipe A only (Ville)
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

For GPIO NC, CCK, CCU, and GPS CORE.
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NShobhit Kumar <shobhit.kumar@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Signed-off-by: NShobhit Kumar <shobhit.kumar@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Acked-by: NDave Airlie <airlied@gmail.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

A follow-on to the update of the LLC coherency logic is that we can rely
on the LLC being coherent with the CS for rewriting batchbuffers
irrespective of their cache domain. (This should have no effect
currently as all the batch buffers are expected to be I915_CACHE_LLC and
so using the cpu relocation path anyway.)
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The important bugfix here is that we must not unlink the vma when
we keep it around as a placeholder for the execbuf code. Since then we
won't find it again when execbuf gets interrupt and restarted and
create a 2nd vma. And since the code as-is isn't fit yet to deal with
more than one vma, hilarity ensues.

Specifically the dma map/unmap of the sg table isn't adjusted for
multiple vmas yet and will blow up like this:

BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
IP: [<ffffffffa008fb37>] i915_gem_gtt_finish_object+0x73/0xc8 [i915]
PGD 56bb5067 PUD ad3dd067 PMD 0
Oops: 0000 [#1] SMP
Modules linked in: tcp_lp ppdev parport_pc lp parport ipv6 dm_mod dcdbas snd_hda_codec_hdmi pcspkr snd_hda_codec_realtek serio_raw i2c_i801 iTCO_wdt iTCO_vendor_support snd_hda_intel snd_hda_codec lpc_ich snd_hwdep mfd_core snd_pcm snd_page_alloc snd_timer snd soundcore acpi_cpufreq i915 video button drm_kms_helper drm mperf freq_table
CPU: 1 PID: 16650 Comm: fbo-maxsize Not tainted 3.11.0-rc4_nightlytop_d93f59_debug_20130814_+ #6957
Hardware name: Dell Inc. OptiPlex 9010/03JR84, BIOS A01 05/04/2012
task: ffff8800563b3f00 ti: ffff88004bdf4000 task.ti: ffff88004bdf4000
RIP: 0010:[<ffffffffa008fb37>]  [<ffffffffa008fb37>] i915_gem_gtt_finish_object+0x73/0xc8 [i915]
RSP: 0018:ffff88004bdf5958  EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff8801135e0000 RCX: ffff8800ad3bf8e0
RDX: ffff8800ad3bf8e0 RSI: 0000000000000000 RDI: ffff8801007ee780
RBP: ffff88004bdf5978 R08: ffff8800ad3bf8e0 R09: 0000000000000000
R10: ffffffff86ca1810 R11: ffff880036a17101 R12: ffff8801007ee780
R13: 0000000000018001 R14: ffff880118c4e000 R15: ffff8801007ee780
FS:  00007f401a0ce740(0000) GS:ffff88011e280000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000008 CR3: 000000005635c000 CR4: 00000000001407e0
Stack:
 ffff8801007ee780 ffff88005c253180 0000000000018000 ffff8801135e0000
 ffff88004bdf59a8 ffffffffa0088e55 0000000000000011 ffff8801007eec00
 0000000000018000 ffff880036a17101 ffff88004bdf5a08 ffffffffa0089026
Call Trace:
 [<ffffffffa0088e55>] i915_vma_unbind+0xdf/0x1ab [i915]
 [<ffffffffa0089026>] __i915_gem_shrink+0x105/0x177 [i915]
 [<ffffffffa0089452>] i915_gem_object_get_pages_gtt+0x108/0x309 [i915]
 [<ffffffffa0085ba9>] i915_gem_object_get_pages+0x61/0x90 [i915]
 [<ffffffffa008f22b>] ? gen6_ppgtt_insert_entries+0x103/0x125 [i915]
 [<ffffffffa008a113>] i915_gem_object_pin+0x1fa/0x5df [i915]
 [<ffffffffa008cdfe>] i915_gem_execbuffer_reserve_object.isra.6+0x8d/0x1bc [i915]
 [<ffffffffa008d156>] i915_gem_execbuffer_reserve+0x229/0x367 [i915]
 [<ffffffffa008dbf6>] i915_gem_do_execbuffer.isra.12+0x4dc/0xf3a [i915]
 [<ffffffff810fc823>] ? might_fault+0x40/0x90
 [<ffffffffa008eb89>] i915_gem_execbuffer2+0x187/0x222 [i915]
 [<ffffffffa000971c>] drm_ioctl+0x308/0x442 [drm]
 [<ffffffffa008ea02>] ? i915_gem_execbuffer+0x3ae/0x3ae [i915]
 [<ffffffff817db156>] ? __do_page_fault+0x3dd/0x481
 [<ffffffff8112fdba>] vfs_ioctl+0x26/0x39
 [<ffffffff811306a2>] do_vfs_ioctl+0x40e/0x451
 [<ffffffff817deda7>] ? sysret_check+0x1b/0x56
 [<ffffffff8113073c>] SyS_ioctl+0x57/0x87
 [<ffffffff8135bbfe>] ? trace_hardirqs_on_thunk+0x3a/0x3f
 [<ffffffff817ded82>] system_call_fastpath+0x16/0x1b
Code: 48 c7 c6 84 30 0e a0 31 c0 e8 d0 e9 f7 ff bf c6 a7 00 00 e8 07 af 2c e1 41 f6 84 24 03 01 00 00 10 75 44 49 8b 84 24 08 01 00 00 <8b> 50 08 48 8b 30 49 8b 86 b0 04 00 00 48 89 c7 48 81 c7 98 00
RIP  [<ffffffffa008fb37>] i915_gem_gtt_finish_object+0x73/0xc8 [i915]
 RSP <ffff88004bdf5958>
CR2: 0000000000000008

As a consequence we need to change the "only one vma for now" check in
vma_unbind - since vma_destroy isn't always called the obj->vma_list
might not be empty. Instead check that the vma list is singular at the
beginning of vma_unbind. This is also more symmetric with bind_to_vm.

This fixes the igt/gem_evict_everything|alignment testcases.

v2:
- Add a paranoid WARN to mark_free in the eviction code to make sure
  we never try to evict a vma used by the execbuf code right now.
- Move the check for a temporary execbuf vma into vma_destroy -
  otherwise the failure path cleanup in bind_to_vm will blow up.

Our first attempting at fixing this was

commit 1be81a2f2cfd8789a627401d470423358fba2d76
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Tue Aug 20 12:56:40 2013 +0100

    drm/i915: Don't destroy the vma placeholder during execbuffer reservation

Squash with this when merging!

v3: Improvements suggested in Chris' review:
- Move the WARN_ON in vma_destroy that checks for vmas with an drm_mm
  allocation before the early return.
- Bail out if we hit the WARN in mark_free to hopefully make the
  kernel survive for long enough to capture it.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ben Widawsky <ben@bwidawsk.net>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=68298
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=68171
Tested-by: lu hua <huax.lu@intel.com> (v2)
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The execbuffer handle and exec_link were moved from the object into the
vma. As the vma may be unbound and destroyed whilst attempting to
reserve the execbuffer objects (either through a forced unbind to fix up
a misalignment or through an evict-everything call) we need to prevent
the free of the i915_vma itself. Otherwise not only is the list of
objects to reserve corrupt, but we continue to reference stale vma
entries.

Fixes kernel crash with i-g-t/gem_evict_everything

This regression has been introduced in

commit 04038a515d6eda6dd0857c0ade0b3950d372f4c0
Author:     Ben Widawsky <ben@bwidawsk.net>
AuthorDate: Wed Aug 14 11:38:36 2013 +0200

    drm/i915: Convert execbuf code to use vmas
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
References: http://www.spinics.net/lists/intel-gfx/msg32038.html
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=68298Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

In the execbuf code we don't clean up any vmas which ended up not
getting bound for code simplicity. To make sure that we don't end up
creating multiple vma for the same vm kill the somewhat dangerous
vma_create function and inline it into lookup_or_create.

This is just a safety measure to prevent surprises in the future.

Also update the somewhat confused comment in the execbuf code and
clarify what kind of magic is going on with a new one.

v2: Keep the function separate as requested by Chris. But give it a __
prefix for paranoia and move it tighter together with the other vma
stuff.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ben Widawsky <ben@bwidawsk.net>
Acked-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

In order to transition more of our code over to using a VMA instead of
an <OBJ, VM> pair - we must have the vma accessible at execbuf time. Up
until now, we've only had a VMA when actually binding an object.

The previous patch helped handle the distinction on bound vs. unbound.
This patch will help us catch leaks, and other issues before we actually
shuffle a bunch of stuff around.

This attempts to convert all the execbuf code to speak in vmas. Since
the execbuf code is very self contained it was a nice isolated
conversion.

The meat of the code is about turning eb_objects into eb_vma, and then
wiring up the rest of the code to use vmas instead of obj, vm pairs.

Unfortunately, to do this, we must move the exec_list link from the obj
structure. This list is reused in the eviction code, so we must also
modify the eviction code to make this work.

WARNING: This patch makes an already hotly profiled path slower. The cost is
unavoidable. In reply to this mail, I will attach the extra data.

v2: Release table lock early, and two a 2 phase vma lookup to avoid
having to use a GFP_ATOMIC. (Chris)

v3: s/obj_exec_list/obj_exec_link/
Updates to address
commit 6d2b8885
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Wed Aug 7 18:30:54 2013 +0100

    drm/i915: List objects allocated from stolen memory in debugfs

v4: Use obj = vma->obj for neatness in some places (Chris)
need_reloc_mappable() should return false if ppgtt (Chris)
Signed-off-by: NBen Widawsky <ben@bwidawsk.net>
[danvet: Split out prep patches. Also remove a FIXME comment which is
now taken care of.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The dpll actually runs at the port clock so we don't need
to multiply it again with the pixel multiplier to get the
adjusted_mode.clock. This is in contrast to the ironlake
pixel clock readout code which uses the fdi dotclock: That
one does _not_ run with multiplied pixels.

This issue goes back to the original clock readout code added
in

commit f1f644dc
Author: Jesse Barnes <jbarnes@virtuousgeek.org>
Date:   Thu Jun 27 00:39:25 2013 +0300

    drm/i915: get mode clock when reading the pipe config v9

Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The sdvo input timing needs to be the actual mode, the sdvo
encoder automatically adjusts for the need of pixel doubling or
quadrupling. This was lost in pipe config conversion of the
pixel multiplier in

commit 6cc5f341
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Wed Mar 27 00:44:53 2013 +0100

    drm/i915: add pipe_config->pixel_multiplier

While at it ditch the intel_ prefix from the crtc in
intel_sdvo_mode_set.

Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Historically we've run our own driver hotplug handling in our own
work-queue, which then launched the drm core hotplug handling in the
system workqueue. This is important since we flush our own driver
workqueue in the pageflip code while hodling modeset locks, and only
the drm hotplug code grabbed these locks. But with

commit 69787f7d
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Tue Oct 23 18:23:34 2012 +0000

    drm: run the hpd irq event code directly

this was changed and now we could deadlock in our flip handler if
there's a hotplug work blocking the progress of the crucial unpin
works. So this broke the careful deadlock avoidance implemented in

commit b4a98e57
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Thu Nov 1 09:26:26 2012 +0000

    drm/i915: Flush outstanding unpin tasks before pageflipping

Since the rule thus far has been that work items on our own workqueue
may never grab modeset locks simply restore that rule again.

v2: Add a comment to the declaration of dev_priv->wq to warn readers
about the tricky implications of using it. Suggested by Chris Wilson.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Stuart Abercrombie <sabercrombie@chromium.org>
Reported-by: NStuart Abercrombie <sabercrombie@chromium.org>
References: http://permalink.gmane.org/gmane.comp.freedesktop.xorg.drivers.intel/26239
Cc: stable@vger.kernel.org
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
[danvet: Squash in a comment at the place where we schedule the work.
Requested after-the-fact by Chris on irc since the hpd work isn't the
only place we botch this.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Somehow we've lost the error handling in the patch split-up between
the internal and external patch. This regression has been introduced
in

commit 5032d871
Author: Rafael Barbalho <rafael.barbalho@intel.com>
Date:   Wed Aug 21 17:10:51 2013 +0100

    drm/i915: Cleaning up the relocate entry function

This bug is exercised by igt/gem_reloc_vs_gpu/interruptible.

Cc: Rafael Barbalho <rafael.barbalho@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

intel_fixed_panel_mode() overwrote the adjusted_mode with the fixed mode
only partially. Notably it forgot to copy over the sync flags. The LVDS code however programmed the hardware with the sync flags from fixed mode, and then later the pipe config comparison obviously failed as we
filled out the adjusted_mode in get_config from the real registers.

Just call drm_mode_copy() in intel_fixed_panel_mode() to copy over the
whole thing, and then just use adjusted_mode in the LVDS code to figure
out which sync settings the hardware needs.

Also constify the fixed_mode argument to intel_fixed_panel_mode().
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

One needs to call __sg_free_table() if __sg_alloc_table() fails, but
sg_alloc_table() does that for us already.
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Reviewd-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This is intended to add VGA arbiter support for Intel HD graphics on
Core processors.  The old GMCH registers no longer exist, so even
though it appears that i915 participates in VGA arbitration, it doesn't
work.  On Intel HD graphics we already attempt to disable VGA regions
of the device.  This makes registering as a VGA client unnecessary since
we don't intend to operate differently depending on how many VGA devices
are present.  We can disable VGA memory regions by clearing the memory
enable bit in the VGA MSR.  That only leaves VGA IO, which we update
the VGA arbiter to know that we don't participate in VGA memory
arbitration.  We also add a hook on unload to re-enable memory and
reinstate VGA memory arbitration.

v3: Use explicit LEGACY_IO | LEGACY_MEM when restoring rather than
    LEGACY_MASK, per Ville's comments.

v2: I915_READ/WRITE accessors don't work in i915_disable_vga, use inb/outb
    directly.  Also, on the driver unbind VGA enable path, acquire legacy
    IO to re-enable VGA memory.  Correct comment.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
[danvet: Add patch changelog. Also squash in a fixup to have a dummy
static inline for vga_set_legacy_decoding for CONFIG_VGA_ARB=n as
reported by the 0-day kernel build bot.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

fixup 2

When VGA decodes change we need to do a bit more evaluation of exactly what
has changed.  We don't necessarily give up all the old owns resources and
we need to account for resources with locks.  The new algorithm is: If
something is added, update decodes.  If legacy resources were added and
none were there before, we have a new participant.  If something is
removed, update decodes.  If we previously owned it, we no longer own it.
If it was previously locked, invalidate all locks and release it.  If
legacy resources were removed and none are left, remove the participant
from VGA arbitration.

Previously we updated decodes, released ownership of everything that was
previously decoded, ignored all locks, and went off looking for another
device to transfer VGA to.  In a test case where Intel IGD removes only
legacy VGA memory decoding, this left the arbiter switching to discrete
graphics without actually disabling legacy VGA IO from the IGD.  As a
bonus, we bumped up the count of VGA arbitration participants for no
good reason.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
Cc: Dave Airlie <airlied@redhat.com>
Acked-by: NDave Airlie <airlied@redhat.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
[danvet: Kill now unused variables, reported by the 0-day kernel
builtbot.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

If a device does not own a resource then we don't need to disable it.
This resolves the case where an Intel IGD device can be configured to
disable decode of VGA memory but we still need the arbiter to handle
VGA I/O port routing.  When the IGD device is in conflict, only
PCI_COMMAND_IO should be disabled since VGA memory does not require
arbitration on this device.
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
Cc: Dave Airlie <airlied@redhat.com>
Acked-by: NDave Airlie <airlied@redhat.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

As we attempt to kmalloc after calling get_pages, there is a possibility
that the shrinker may reap the pages we just acquired. To prevent this
we need to increment the pages_pin_count early, so rearrange the code
and error paths to make it so.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We shouldn't disable the trickle feed bits on Haswell. Our
documentation explicitly says the trickle feed bits of PRI_CTL and
CUR_CTL should not be programmed to 1, and the hardware engineer also
asked us to not program the SPR_CTL field to 1. Leaving the bits as 1
could cause underflows.
Reported-by: NArthur Runyan <arthur.j.runyan@intel.com>
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Systems with Intel graphics controllers set aside memory exclusively for
gfx driver use.  This memory is not always marked in the E820 as
reserved or as RAM, and so is subject to overlap from E820 manipulation
later in the boot process.  On some systems, MMIO space is allocated on
top, despite the efforts of the "RAM buffer" approach, which simply
rounds memory boundaries up to 64M to try to catch space that may decode
as RAM and so is not suitable for MMIO.

v2: use read_pci_config for 32 bit reads instead of adding a new one
    (Chris)
    add gen6 stolen size function (Chris)
v3: use a function pointer (Chris)
    drop gen2 bits (Daniel)
v4: call e820_sanitize_map after adding the region
v5: fixup comments (Peter)
    simplify loop (Chris)
Acked-by: NIngo Molnar <mingo@kernel.org>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Acked-by: NH. Peter Anvin <hpa@zytor.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=66726
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=66844Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

For use by userspace (at some point in the future) and other kernel code.

v2: move PCI IDs to uabi (Chris)
    move PCI IDs to drm/ (Dave)
v3: fixup Quanta detection - needs to come first (Daniel)
v4: fix up PCI match structure init for easier use by userspace (Chris)
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The helper exists, might as well use it instead of __GFP_ZERO.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

RCS flips do work on Iybridge+ so long as we can unmask the messages
through DERRMR. However, there are quite a few workarounds mentioned
regarding unmasking more than one event or triggering more than one
message through DERRMR. Those workarounds in principle prevent us from
performing pipelined flips (and asynchronous flips across multiple
planes) and equally apply to the "known good" BCS ring. Given that it
already appears to work, and also appears to work with unmasking all 3
planes at once (and queuing flips across multiple planes), be brave.

Bugzlla: https://bugs.freedesktop.org/show_bug.cgi?id=67600Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Lightly-tested-by: NStephane Marchesin <marchesin@icps.u-strasbg.fr>
Cc: Stephane Marchesin <marchesin@icps.u-strasbg.fr>
Cc: Ben Widawsky <ben@bwidawsk.net>
Tested-by: NStéphane Marchesin <marcheu@chromium.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We now have more devices using ring->private than not, and they all want
the same structure. Worse, I would like to use a scratch page from
outside of intel_ringbuffer.c and so for convenience would like to reuse
ring->private. Embed the object into the struct intel_ringbuffer so that
we can keep the code clean.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

If need to enable the panel fitter, the crtc timings have to be
programmed according to the panel's native (fixed) mode. This isn't the
case atm, since after the encoder changes adjusted_mode to fixed
mode the crtc_* timing fields of adjusted_mode will stay at their original
non-native values that the user passed in. This results in a corrupted
output.

One exception is when we have a second pass of computing encoder configs
due to bandwidth limitation, since then we'll set adjusted_mode.crtc_*
fields to the fixed mode values set in the first pass; so in this case
things will work out.

Fix this by updating the adjusted_mode.crtc_* fields when we set the
fixed panel mode.

This regression has been introduced in

commit 135c81b8
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Sun Jul 21 21:37:09 2013 +0200

    drm/i915: clean up crtc timings computation
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We already have a big splashing *ERROR* for all the relevant cases of
hangs, so this one here is redudant. And it results in an unclean
dmesg when running with simulated hangs. Regression has been
introduced in

commit 05407ff8
Author: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Date:   Thu May 30 09:04:29 2013 +0300

    drm/i915: detect hang using per ring hangcheck_score

Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=68641Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

It can be useful to compare at times the current vs requested frequency
of the GPU, so provide the contents of RPNSWREQ alonside CAGF.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>